A Modular Furanoside Thioether‐Phosphite/Phosphinite/ Phosphine Ligand Library for Asymmetric Iridium‐Catalyzed Hydrogenation of Minimally Functionalized Olefins: Scope and Limitations

A highly modular furanoside thioether‐phosphite/phosphinite/phosphine ligand library has been synthesized for the iridium‐catalyzed asymmetric hydrogenation of minimally functionalized olefins. These ligands can be prepared efficiently from easily accessible D ‐(+)‐xylose. We found that their effectiveness at transferring the chiral information in the product can be tuned by correctly choosing the ligand components. Enantioselectivities were therefore excellent (ees up to 99%) in a wide range of E‐ and Z‐trisubstituted alkenes using 5‐deoxyribofuranoside thioether‐phosphite ligands. It should be pointed out that these catalysts are also very tolerant to the presence of a neighbouring polar group. For 1,1‐disubstituted substrates, both enantiomers of the hydrogenation product can be obtained in high enantioselectivities simply by changing the configuration of the biaryl phosphite moiety. The asymmetric hydrogenation was also performed using propylene carbonate as solvent, which allowed the iridium catalysts to be reused while maintaining the excellent enantioselectivities.     

A Phosphite‐Pyridine/Iridium Complex Library as Highly Selective Catalysts for the Hydrogenation of Minimally Functionalized Olefins

A modular library of readily available phosphite‐pyridine ligands has been successfully applied for the first time in the iridium‐catalyzed asymmetric hydrogenation of a broad range of minimally functionalized olefins. The modular ligand design has been shown to be crucial in finding highly selective catalytic systems for each substrate. Excellent enantioselectivities (ees up to 99%) have therefore been obtained in a wide range of E‐ and Z‐trisubstituted alkenes, including more demanding triaryl‐substituted olefins and dihydronaphthalenes. This good performance extends to the very challenging class of terminal disubstituted olefins, and to olefins containing neighbouring polar groups (ees up to 99%). Both enantiomers of the reduction product can be obtained in excellent enantioselectivities by simply changing the configuration of the carbon next to the phosphite moiety. The hydrogenations were also performed using propylene carbonate as solvent, which allowed the iridium catalyst to be reused and maintained the excellent enantioselectivities.

     

Highly Efficient and Enantioselective Iridium‐Catalyzed Asymmetric Hydrogenation of N‐Arylimines

A catalytic method employing the cationic iridium‐(S_c,R_p)‐DuanPhos [(1R,1′R,2S,2′S)‐2,2′‐di‐tert‐butyl‐2,2′,3,3′‐tetrahydro‐1H,1′H‐1,1′‐biisophosphindole] complex and BARF {tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate} counterion effectively catalyzes the enantioselective hydrogenation of acyclic N‐arylimines with high turnover numbers (up to 10,000 TON) and excellent enantioselectivities (up to 98% ee), achieving the practical synthesis of chiral secondary amines.     

Threonine‐Derived Phosphinite‐Oxazoline Ligands for the Ir‐Catalyzed Enantioselective Hydrogenation

A series of chiral phosphinite‐oxazolines was synthesized in four steps starting from carboxylic acids and threonine methyl ester. In the asymmetric hydrogenation of a number of alkenes, iridium complexes of these ligands induced significantly higher enantioselectivities than the corresponding serine‐derived complexes. Enantiomeric excesses of 89 to 99% were obtained for unfunctionalized alkenes with turnover numbers of up to 5000.     

Iridium‐Catalyzed Enantioselective Hydrogenation of Cyclic Imines

A catalytic complex made from [Ir(COD)Cl]₂ [di‐μ‐chloro‐bis(1,5‐cyclooctadiene)diiridium(I)] precursor and (S,S)‐f‐Binaphane ((R,R)‐1,1′‐bis{(R)‐4,5‐dihydro‐3H‐dinaphtho[1,2‐c:2′,1′‐e]phosphepino}ferrocene) ligand effectively catalyzed the enantioselective hydrogenation of cyclic imines with high reactivity and good enantioselectivity.     

Iridium‐Catalysed Asymmetric Hydrogenation of Vinylsilanes as a Route to Optically Active Silanes

The first use of vinylsilanes as substrates in the asymmetric iridium‐catalysed hydrogenation is reported, providing products with enantioselectivities of up to 98 %.     

Highly Efficient Asymmetric Hydrogenation of Alkyl Aryl Ketones Catalyzed by Iridium Complexes with Chiral Planar Ferrocenyl Phosphino-Thioether Ligands

Iridium complexes of planar-chiral ferrocenyl phosphine-thioether ligands were tested in the hydrogenation of simple ketones. Optimization of the conditions led to a highly active catalytic system with turnover numbers up to 915 and turnover frequencies up to ca. 250 h⁻¹. Furthermore, very high enantioselectivities (up to >99 %) together with complete conversions were obtained for the asymmetric hydrogenation of various acetophenones at 10 °C.     

Chiral Bis(N‐arylamino)phosphine‐oxazolines: Synthesis and Application in Asymmetric Catalysis

N‐Arylation or N‐alkylation of chiral 1,2‐diamines followed by ring closure with phosphorus trichloride (PCl₃) and subsequent coupling with an oxazoline alcohol resulted in a new class of N,P ligands. The corresponding iridium tetrakis[3,5‐bis(trifluormethyl)phenyl]borate (BAr_F) complexes were found to be efficient catalysts for the enantioselective hydrogenation of unfunctionalized olefins and α,β‐unsaturated carboxylic esters.     

Homogeneous Hydrogenation of Tri‐ and Tetrasubstituted Olefins: Comparison of Iridium‐Phospinooxazoline [Ir‐PHOX] Complexes and Crabtree Catalysts with Hexafluorophosphate (PF6) and Tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate (BArF) as Counterions

Four iridium complexes with achiral phosphino‐oxazoline (PHOX) ligands were readily prepared in two steps starting from commercially available phenyloxazolines. The air‐stable complexes with tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate (BAr_F) as counterion showed high reactivity in the hydrogenation of a range of tri‐ and tetrasubstituted olefins. The best results were obtained with an iridium complex ( 11 ) derived from a dicyclohexylphosphino‐oxazoline ligand bearing no additional substituents in the oxazoline ring. With several substrates, which gave only low conversion with the Crabtree catalyst, [Ir(Py)(PCy₃)(COD)]PF₆, full conversion was observed. The productivity of the Crabtree catalyst could be strongly increased by replacing the hexafluorophosphate anion with tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate. In one case, in the hydrogenation of a tetraalkyl‐substituted CC bond, [Ir(Py)(PCy₃)(COD)]BAr_F gave higher conversion than catalyst 11 . However, with several other substrates complex 11 proved to be superior.     

Highly Enantioselective Hydrogenation of Quinoline and Pyridine Derivatives with Iridium‐(P‐Phos) Catalyst

The use of a chiral iridium catalyst generated in situ from the (cyclooctadiene)iridium chloride dimer, [Ir(COD)Cl]₂, the P‐Phos ligand [4,4′‐bis(diphenylphosphino)‐2,2′,6,6′‐tetramethoxy‐3,3′‐bipyridine] and iodine (I₂) for the asymmetric hydrogenation of 2,6‐substituted quinolines and trisubstituted pyridines [2‐substituted 7,8‐dihydroquinolin‐5(6H)‐one derivatives] is reported. The catalyst worked efficiently to hydrogenate a series of quinoline derivatives to provide chiral 1,2,3,4‐tetrahydroquinolines in high yields and up to 96% ee. The hydrogenation was carried out at high S/C (substrate to catalyst) ratios of 2000–50000, reaching up to 4000 h⁻¹ TOF (turnover frequency) and up to 43000 TON (turnover number). The catalytic activity is found to be additive‐controlled. At low catalyst loadings, decreasing the amount of additive I₂ was necessary to maintain the good conversion. The same catalyst system could also enantioselectively hydrogenate trisubstituted pyridines, affording the chiral hexahydroquinolinone derivatives in nearly quantitative yields and up to 99% ee. Interestingly, increasing the amount of I₂ favored high reactivity and enantioselectivity in this case. The high efficacy and enantioselectivity enable the present catalyst system of high practical potential.     

Impact of Incorporating Substituents onto the P‐o‐Anisyl Groups of DiPAMP Ligand on the Rhodium(I)‐Catalyzed Asymmetric Hydrogenation of Olefins

The introduction of 1,2‐bis[(o‐anisyl)(phenyl)phosphino]ethane (DiPAMP) as a P‐stereogenic ligand for rhodium(I)‐catalyzed hydrogenation by Knowles et al. came after their evaluation of several diphosphines. However, no in‐depth study was carried out on incorporating various substituents on its P‐o‐anisyl groups. In this work, we have prepared a large series of enantiopure and closely related DiPAMP analogues possessing various substituents (MeO, TMS, t‐Bu, Ph, fused benzene ring) on the o‐anisyl rings. The new ligands were evaluated in rhodium‐catalyzed hydrogenation of several model substrates: methyl α‐acetamidoacrylate, methyl (Z)‐α‐acetamidocinnamate, methyl (Z)‐β‐acetamidocrotonate, dimethyl itaconate, and atropic acid. They displayed enhanced activities and increased enantioselectivities, particularly the P‐(2,3,4,5‐tetra‐MeO‐C₆H)‐substituted ligand (4MeBigFUS). Interestingly enough, 88% ee was obtained in the hydrogenation of atropic acid using the Rh‐(4MeBigFUS) catalyst under mild conditions (10 bar H₂, room temperature) versus 7% ee using Rh‐DiPAMP. Conversely, the ligand possessing P‐(2,6‐di‐MeO‐C₆H₃) groups proved to slow down considerably the hydrogenation. X‐Ray structures of their corresponding Rh complexes are presented and discussed.     

Enantioselective Synthesis of Chiral Tetrahydroisoquinolines by Iridium‐Catalyzed Asymmetric Hydrogenation of Enamines

Chiral iridium complexes based on spiro phosphoramidite ligands are demonstrated to be highly efficient catalysts for the asymmetric hydrogenation of unfunctionalized enamines with an exocyclic double bond. In combination with excess iodine or potassium iodide and under hydrogen pressure, the complex Ir/(S_a,R,R)‐ 3a provides chiral N‐alkyltetrahydroisoquinolines in high yields with up to 98% ee. The L/Ir ratio of 2:1 is crucial for obtaining a high reaction rate and enantioselectivity. A deuterium labeling experiment showed that an inverse isotope effect exists in this reaction. A possible catalytic cycle including an iridium(III) species bearing two monophosphoramidite ligands is also proposed.     

Asymmetric Synthesis of the Roche Ester and its Derivatives by Rhodium‐INDOLPHOS‐Catalyzed Hydrogenation

(S)‐3‐Hydroxy‐2‐methylpropionate, known as the Roche ester, and several of its derivatives were successfully synthesized through asymmetric rhodium‐catalyzed hydrogenation, using INDOLPHOS (diisopropyl{1‐[(S)‐3,5‐dioxa‐4‐phosphacyclohepta[2,1‐a;3,4‐a′]dinaphthalen‐4‐yl]‐3‐methyl‐2‐indolyl}phosphine) as the chiral ligand, in excellent yield and the highest ee reported up to now (TOF over 5500 h⁻¹ at 25 °C; up to 98% ee at −40 °C).     

Highly Enantioselective Iridium‐Catalyzed Hydrogenation of Quinoline Derivatives Using Chiral Phosphinite H8‐BINAPO

The chiral diphosphinite H8‐BINAPO derived from H8‐BINOL has been used in the Ir‐catalyzed asymmetric hydrogenation of quinolines, and high enantioselectivity (up to 97% ee) was obtained. Immobilization of the iridium catalyst in poly(ethylene glycol) dimethyl ether (DMPEG) is also discussed. With DMPEG/hexane biphasic system, better enantioselectivities were obtained as compared to those observed in aprotic organic solvents.     

Iridium‐Catalyzed Enantioselective Hydrogenation of β,β‐Disubstituted Nitroalkenes

A highly efficient, iridium‐catalyzed, enantioselective hydrogenation of β,β‐disubstituted nitroalkenes has been developed. Using a complex consisting of iridium and (S,S)‐f‐spiroPhos as the catalyst, a variety of β,β‐disubstituted nitroalkenes were successfully hydrogenated to the corresponding chiral nitroalkanes with excellent enantioselectivities (up to 98% ee) and high turnover numbers (TON=1000).

     

Evolutionary Catalyst Screening: Iridium‐Catalyzed Imine Hydrogenation

A high throughput catalyst screening is presented employing an evolutionary approach. The method comprises the optimization of initial leads by subjecting the catalysts to iterative rounds of optimization, including structural elaboration of the ligands by creating new focused libraries. Highly modular supramolecular ligands, robotized synthesis combined by high throughput experimentation creates a platform for fast catalyst development. An illustrative example for the asymmetric hydrogenation of cyclic 2,3,3‐trimethyl‐3H‐indole using iridium catalysts is presented. The kinetic investigation of the best catalyst yields an unusual second order in iridium, first order in hydrogen and zeroth order in substrate. Under optimized reaction conditions a TOF of 100 mol mol⁻¹ h⁻¹ with 96% ee could be obtained with the best catalyst. A full catalyst screening and kinetic study was conducted within a three‐week time‐frame.     

DiPAMP’s Big Brother “i‐Pr‐SMS‐Phos” Exhibits Exceptional Features Enhancing Rhodium(I)‐Catalyzed Hydrogenation of Olefins

Switching Knowles DiPAMP’s {DiPAMP=1,2‐bis[(o‐anisyl)(phenyl)phosphino]‐ ethane} MeO groups with i‐PrO ones led to the i‐Pr‐SMS‐Phos {i‐Pr‐SMS‐Phos=1,2‐bis[(o‐isoprop‐ oxyphenyl)(phenyl)phosphino]ethane} ligand which displayed a boosted catalyst activity coupled with an enhanced enantioselectivity in the rhodium(I)‐catalyzed hydrogenation of a wide‐range of representative olefinic substrates (dehydro‐α‐amido acids, itaconates, acrylates, enamides, enol acetates, α,α‐diarylethylenes, etc). The rhodium(I)‐(i‐Pr‐SMS‐Phos) catalytic profile was investigated revealing its structural attributes and robustness, and in contrast to the usual trend, ³¹P NMR analysis revealed that its methyl (Z)‐α‐acetamidocinnamate (MAC) adduct consisted of a reversed diastereomeric ratio of 1.4:1 in favour of the most reactive diastereomer.