Application of a Recombinant Escherichia coli Whole‐Cell Catalyst Expressing Hydroxynitrile Lyase and Nitrilase Activities in Ionic Liquids for the Production of (S)‐Mandelic Acid and (S)‐Mandeloamide

The conversion of benzaldehyde and cyanide into mandelic acid and mandeloamide by a recombinant Escherichia coli strain which simultaneously expressed an (S)‐hydroxynitrile lyase (oxynitrilase) from cassava (Manihot esculenta) and an arylacetonitrilase from Pseudomonas fluorescens EBC191 was studied. Benzaldehyde exhibited a pronounced inhibitory effect on the nitrilase activity in concentrations ≥25 mM. Therefore, it was tested if two‐phase systems consisting of a buffered aqueous phase and the ionic liquid 1‐butyl‐1‐pyrrolidinium bis(trifluoromethanesulfonyl)imide (BMpl NTf₂) or 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMim PF₆) could be used for the intended biotransformation. The distribution coefficients of the substrates, intermediates and products of the reaction were determined and it was found that BMpl NTf₂ and BMim PF₆ were highly efficient as substrate reservoirs for benzaldehyde. The recombinant E. coli strain was active in the presence of BMpl NTf₂ or BMim PF₆ phases and converted benzaldehyde and cyanide into mandelic acid and mandeloamide. The two‐phase systems allowed the conversion of benzaldehyde dissolved in the ionic liquids to a concentration of 700 mM with product yields (=sum of mandelic acid and mandeloamide) of 87–100%. The cells were slightly more effective in the presence of BMpl NTf₂ than in the presence of BMim PF₆. In both two‐phase systems benzaldehyde and cyanide were converted into (S)‐mandeloamide and (S)‐mandelic acid with enantiomeric excesses ≥94%. The recombinant E. coli cells formed, in the two‐phase systems with ionic liquids and increased substrate concentrations, higher relative amounts of mandeloamide than in a purely aqueous system with lower substrate concentrations.     

Synthesis of (R)‐ and (S)‐Ricinoleic Acid Amides and Evaluation of Their Antimicrobial Activity

A series of fatty acid amides derived from (R)‐ and (S)‐ricinoleic acid and 4 cyclic and acyclic amines were synthesized in a proecological solvent‐free process with yields ranging from 43 to 88%. All S‐configured compounds and both enantiomers of amide with 2‐amino‐2‐methyl‐1‐propanol were obtained and studied in terms of biological activity for the first time. The evaluation of antimicrobial activity of (R)‐ and (S)‐ricinoleic acid derivatives against 13 different microorganisms representing Gram‐negative and Gram‐positive bacteria, yeast, and molds showed significant inhibitory activity against Gram‐positive bacteria, especially Micrococcus luteus and Bacillus subtilis, and against selected molds. Ethanolamine‐ and pyrrolidine‐derived amides showed the most promising antibacterial and antimold potential. Derivatives from ricinoleic acid and pyrrolidine were the most active against both selected molds, Aspergillus brasiliensis and Penicillium expansum. Moreover, the R‐configured analog was the most potent against B. subtilis. The amides of ricinoleic acid with ethanolamine exhibited significant potential to Staphylococcus aureus, which distinguished them from the rest of tested derivatives to which this bacterium was very resistant.     

Cross‐Linked Amorphous Nitrilase Aggregates for Enantioselective Nitrile Hydrolysis

A recombinant Escherichia coli strain was constructed which efficiently expressed the enantioselective nitrilase from Alcaligenes faecalis DSMZ 30030 as a hisitidine‐tagged enzyme variant under the control of a rhamnose inducible promoter. The enzyme was purified from cell extracts and used for the preparation of cross‐linked enzyme aggregates (CLEAs). The conditions for the preparation of the CLEAs were optimized using various organic solvents and cross‐linking agents and a procedure was developed which combined a precipitation with 85 % (v/v) isopropyl alcohol and a cross‐linking with 30 mM glutaraldehyde. Thus, about 80 % of the initial nitrilase activity could be incorporated into the CLEAs. The hydrolysis of racemic mandelonitrile to (R)‐mandelic acid was compared between the soluble nitrilase preparations and their CLEAs (nit‐CLEAs). The nitrilase activity in the CLEAs was at 30 °C and 60 °C about 5 times more stable than in the soluble preparations. The CLEAs could be reused 5 times with only about 10 % reduction in activity. The enantioselectivity of the nitrilase for the formation of (R)‐mandelic acid from racemic mandelonitrile decreased for both preparations with increasing temperatures (10 °C to 50 °C), but this effect was significantly less pronounced for the CLEAs. A detailed analysis of solvent effects on nitrilase enantioselectivity allowed thermodynamic insights into contributions from free energy component (activation enthalpy and entropy) to chiral preference of nitrilase in such non conventional media.     

Optically Active 4‐Substituted (S)‐2‐Phenyl‐2‐oxazolines

(R)‐4‐Hydroxymethyl‐2‐phenyl‐2‐oxazoline (R)‐ 1 ) was prepared from (L)‐serine. The respective tosylate ((S)‐ 2 ) was converted into sulfides (S)‐ 4 and (S)‐ 5 , and sulfone (S)‐ 6 , useful starting materials for the elaboration of additional chiral centers. A previously reported [ α]_D ²⁵ value for (R)‐ 4 is corrected.     

(S)‐Selectivity in Phenylacetyl Carbinol Synthesis Using the Wild‐Type Enzyme Acetoin:Dichlorophenolindophenol Oxidoreductase from Bacillus licheniformis

Thiamine diphosphate (ThDP)‐dependent enzymes are well known biocatalysts for the asymmetric synthesis of α‐hydroxy ketones with preferential (R)‐selectivity. Pharmaceutically relevant phenylacetyl carbinol (PAC) has been prepared with absolute (S)‐configuration only on a few occasions using enzyme variants suitably designed through rational site‐directed mutagenesis approaches. Herein, we describe the synthesis of (S)‐phenylacetyl carbinol products with extended reaction scope employing the readily available wild‐type ThDP‐dependent enzyme acetoin:dichlorophenolindophenol oxidoreductase (Ao:DCPIP OR) from Bacillus licheniformis. On a semipreparative scale, cross‐benzoin‐like condensations of methylacetoin (donor) and differently substituted benzaldehydes proceed with almost complete chemoselectivity yielding the target (S)‐1‐hydroxy‐1‐phenylpropan‐2‐one derivatives with high conversion efficiencies (up to 95%) and good enantioselectivities (up to 99%). Ao:DCPIP OR accepts hydroxy‐ and nitrobenzaldehydes and also sterically demanding substrates such as 1‐naphthaldehyde and 4‐(tert‐butyl)benzaldehyde, which are typically poor acceptors in enzymatic transformations. The explorative synthesis of (S)‐phenylpropionyl carbinol mediated by Ao:DCPIP OR via carboligation of benzaldehyde with 3,4‐hexanedione is also reported.

     

In vitro Characterization of Enzymes Involved in the Synthesis of Nonproteinogenic Residue (2S,3S)‐β‐Methylphenylalanine in Glycopeptide Antibiotic Mannopeptimycin

Mannopeptimycin, a potent drug lead, has superior activity against difficult‐to‐treat multidrug‐resistant Gram‐positive pathogens such as methicillin‐resistant Staphylococcus aureus (MRSA). (2S,3S)‐β‐Methylphenylalanine is a residue in the cyclic hexapeptide core of mannopeptimycin, but the synthesis of this residue is far from clear. We report here on the reaction order and the stereochemical course of reaction in the formation of (2S,3S)‐β‐methylphenylalanine. The reaction is executed by the enzymes MppJ and TyrB, an S‐adenosyl methionine (SAM)‐dependent methyltransferase and an (S)‐aromatic‐amino‐acid aminotransferase, respectively. Phenylpyruvic acid is methylated by MppJ at its benzylic position at the expense of one equivalent of SAM. The resulting β‐methyl phenylpyruvic acid is then converted to (2S,3S)‐β‐methylphenylalanine by TyrB. MppJ was further determined to be regioselective and stereoselective in its catalysis of the formation of (3S)‐β‐methylphenylpyruvic acid. The binding constant (K_D) of MppJ versus SAM is 26 μM . The kinetic constants with respect to k_{cat Ppy} and K_{M Ppy}, and k_{cat SAM} and K_{M SAM} are 0.8 s^?1 and 2.5 mM , and 8.15 s^?1 and 0.014 mM , respectively. These results suggest SAM has higher binding affinity for MppJ than Ppy, and the C? C bond formation in βmPpy might be the rate‐limiting step, as opposed to the C? S bond breakage in SAM.     

The Regioisomeric Triphenylaminoethanols –Comparison of their Efficiency in Enantioselective Catalysis

Both enantiomers of the novel amino alcohol (R)‐ and (S)‐ 2 are prepared from the corresponding enantiomer of the mandelic acid‐derived ethanediol 3 . The regioisomeric amino alcohols 1 and 2 are converted into the imines 7 and 8 , respectively. Titanium complexes 9 and 10 derived therefrom are used as catalysts for the addition of diethylzinc to benzaldehyde and yield the alcohol 11 in up to 92% ee. On the other hand, the chloro‐substituted titanium complexes 14 and 15 are able to mediate the Torgov cyclization reaction of the diketone 16 to give the estrone derivative 17 . In both reactions titanium complexes 10 and 15 derived of the novel amino alcohol 2 give higher enantioselectivities than the complexes 9 and 14 that are based on the regioisomeric amino alcohol 1 .     

Synthesis and Highly Stereoselective Hydrogenation of the Statin Precursor Ethyl (5S)‐5,6‐Isopropylidenedioxy‐3‐oxohexanoate

A search for the large‐scale preparation of (5S)‐5,6‐(isopropylidenedioxy)‐3‐oxohexanoates ( 2 ) – a key intermediate in the synthesis of pharmacologially important statins – starting from (S)‐malic acid is described. The synthesis of the required initial compound methyl (3S)‐3,4‐(isopropylidenedioxy)butanoate ( 1 ) by Moriwake’s reduction of dimethyl (S)‐malate ( 3 ) has been improved. Direct 2‐C chain elongation of ester 1 using the lithium enolate of tert‐butyl acetate has been shown to be successful at a 3‐ to 5‐fold excess of the enolate. Unfortunately, the product, tert‐butyl (5S)‐5,6‐(isopropylidenedioxy)‐3‐oxohexanoate ( 2a ) is unstable during distillation. Ethyl (5S)‐5,6‐(isopropylidenedioxy)‐3‐oxohexanoate ( 2b ) was prepared alternatively on a multigram scale from (3S)‐3,4‐(isopropylidenedioxy)butanoic acid ( 7 ) by activation with N,N′‐carbonyldiimidazole and subsequent reaction with Mg(OOCCH₂COOEt)₂. A convenient pathway for the in situ preparation of the latter is also described. Ethyl ester ( 2b ) can be advantageously purified by distillation. The stereochemistry of the catalytic hydrogenation of β‐keto ester ( 2b ) to ethyl (5S)‐5,6‐(isopropylidenedioxy)‐3‐hydrohyhexanoate (syn‐ 6 and anti‐ 6 ) has been studied using a number of homogeneous achiral and chiral Rh(I) and Ru(II) complexes with phosphine ligands. A comparison of Rh(I) and Ru(II) catalysts with (S)‐ and (R)‐BINAP as chiral ligands revealed opposite activity in dependence on the polarity of the solvent. No influence of the chiral backbone of substrate 2b on the enantioselectivity was noted. A ratio of syn‐ 6 /anti‐ 6 =2.3 was observed with an achiral (Ph₃P)₃RuCl₂ catalyst. Ru[(R)‐Tol‐BINAP]Cl₂ neutralized with one equivalent of AcONa afforded the most efficient catalytic system for the production of optically pure syn‐(5S)‐5,6‐isopropylidenedioxy‐3‐hydroxyhexanoate (syn‐ 6 ) at a preparative substrate/catalyst ratio of 1000:1.     

Synthesis and Derivatization of Substituted (R)‐ and (S)‐ C‐Allylglycines

Various (R)‐ and (S)‐C‐allylglycine derivatives were synthesized by means of an auxiliary controlled diastereoselective aza‐Claisen rearrangement. Starting from (S)‐configured auxiliaries derived from optically active proline, an aza‐Claisen rearrangement enabled us to synthesize α(R)‐configured γ,δ‐unsaturated amides. Since (R)‐allylglycine derivatives could be directly generated by reacting N‐allylproline derivatives and various protected glycine fluorides, the corresponding (S)‐enantiomers were built‐up via an initial α‐chloroacetyl chloride rearrangement and a subsequent chloride azide substitution with complete inversion of the configuration. High diastereoselectivities were obtained (>15 : 1). The auxiliary could be efficiently removed by organolithium reactions of the amides furnishing α‐amino ketones. Another allyllithium addition allowed us to introduce a second allyl chain with high diastereoselectivity. Final ring closures by means of metatheses using Grubbs' (I) catalyst gave raise to the formation of enantiopure phenanthridines and cyclohexenes displaying defined substitution patterns ready for alkaloid total syntheses.     

Efficient separation of (R)‐(‐)‐mandelic acid biosynthesized from (R,S)‐mandelonitrile by nitrilase using ion‐exchange process

BACKGROUND: (R)‐(‐)‐Mandelic acid (R‐MA) is an important intermediate and chiral regent with broad uses. An efficient method for the separation of R‐MA from the bioreaction mixture with high yield is of great importance, thus, the main objective of this work is to investigate the recovery of R‐MA using an ion‐exchange process. RESULTS: The equilibrium isotherms for the separation of R‐MA by resin HZ202 were obtained in the pH range 5.0–9.0 and temperature range 25–35 °C. The equilibrium data are well fitted by the Langmuir isotherm. Batch kinetic experiments showed that the mobility of R‐MA^? in solution was rapid and the R‐MA^?/OH^? ion‐exchange process reached equilibrium after about 60 min. Adsorption kinetics were analyzed by a linear driving force mass‐transfer model, yielding good prediction of the kinetic behavior. In fixed bed column experiments, the breakthrough curves of R‐MA from the solution on resin HZ202 were determined at different flow rates and R‐MA was eluted with different concentrations of HCl. A favorable breakthrough curve and optimal eluant concentration were obtained. The results were used for the separation of R‐MA biosynthesized from (R,S)‐mandelonitrile with nitrilase, and separation was successfully achieved with above 90% recovery yield. CONCLUSION: Resin HZ202 presents favorable behavior for the recovery of R‐MA, in terms of capacity, kinetics, affinity, and susceptibility to regeneration. The results of this study provide an efficient method for R‐MA recovery from bioreaction mixture and could potentially be used in industry. Copyright © 2010 Society of Chemical Industry     

Enantioselective Biooxidation of Racemic trans‐Cyclic Vicinal Diols: One‐Pot Synthesis of Both Enantiopure (S,S)‐Cyclic Vicinal Diols and (R)‐α‐Hydroxy Ketones

Highly regio‐ and enantioselective alcohol dehydrogenases BDHA (2,3‐butanediol dehydrogenase from Bacillus subtilis BGSC1A1), CDDHPm (cyclic diol dehydrogenase from Pseudomonas medocina TA5), and CDDHRh (cyclic diol dehydrogenase from Rhodococcus sp. Moj‐3449) were discovered for the oxidation of racemic trans‐cyclic vicinal diols. Recombinant Escherichia coli expressing BDHA was engineered as an efficient whole‐cell biocatalyst for the oxidation of (±)‐1,2‐cyclopentanediol, 1,2‐cyclohexanediol, 1,2‐cycloheptane‐diol, and 1,2‐cyclooctanediol, respectively, to give the corresponding (R)‐α‐hydroxy ketones in >99% ee and (S,S)‐cyclic diols in >99% ee at 50% conversion in one pot. Escherichia coli (BDHA‐LDH) co‐expressing lactate dehydrogenase (LDH) for intracellular regeneration of NAD⁺ catalyzed the regio‐ and enantioselective oxidation of (±)‐1,2‐dihydroxy‐1,2,3,4‐tetrahydronaphthalene to produce the corresponding (R)‐α‐hydroxy ketone in >99% ee and (S,S)‐cyclic diol in 96% ee at 49% conversion. Preparative biotransformations were also demonstrated. Thus, a novel and useful method for the one‐pot synthesis of both vicinal diols and α‐hydroxy ketones in high ee was developed via highly regio‐ and enantioselective oxidations of the racemic vicinal diols.

     

Primary Amine‐Thioureas with Improved Catalytic Properties for “Difficult” Michael Reactions: Efficient Organocatalytic Syntheses of (S)‐Baclofen, (R)‐Baclofen and (S)‐Phenibut

Among the class of primary amine‐thioureas based on tert‐butyl esters of α‐amino acids, the most efficient organocatalyst for “difficult” Michael reactions was identified. The derivative based on (S)‐di‐tert‐butyl aspartate and (1R,2R)‐diphenylethylenediamine provided the products of the reaction between aryl methyl ketones and nitroolefins in excellent yields and enantioselectivities. In addition, this new catalyst can be used at low catalyst loading (5 mol%). The utility of this methodology was highlighted by the efficient synthesis of (S)‐baclofen, (R)‐baclofen and (S)‐phenibut.     

Synthesis and characterization of novel optically active poly(amide–imide)s containing N,N′‐(pyromellitoyl)‐bis‐L‐valine diacid chloride and 5,5‐disubstituted hydantoin derivatives under microwave irradiation

Pyromellitic dianhydride (1,2,4,5‐benzenetetracarboxylic acid 1,2,4,5‐dianhydide) was reacted with L ‐valine in a mixture of acetic acid and pyridine (3:2) at room temperature, and then was refluxed at 90–100 °C, N,N′‐(pyromellitoyl)‐bis‐L ‐valine diacid was obtained in quantitative yield. The imide–acid was converted to N,N′‐(pyromellitoyl)‐bis‐L ‐valine diacid chloride by reaction with thionyl chloride. Rapid and highly efficient synthesis of a number of poly(amide–imide)s was achieved under microwave irradiation using a domestic microwave oven by polycondensation of N,N′‐(pyromellitoyl)‐bis‐L ‐valine diacid chloride with six different derivatives of 5,5‐disubstituted hydantoin compounds in the presence of a small amount of a polar organic medium that acts as a primary microwave absorber. A suitable organic medium was o‐cresol. The polycondensation proceeded rapidly, compared with conventional melt polycondensation and solution polycondensation and was almost completed within 8 min, giving a series of poly(amide–imide)s with inherent viscosities in the range 0.15–0.36 dl g^?1. The resulting poly(amide–imide)s were obtained in high yield and are optically active and thermally stable. All of the above compounds were fully characterized by Fourier‐transform infrared (FT‐IR) spectroscopy, elemental analysis, inherent viscosity (η_inh) measurements, solubility testing and specific rotation measurements. The thermal properties of the poly(amide–imide)s were investigated by using thermogravimetric analysis. Copyright © 2004 Society of Chemical Industry     

Efficient Biosynthesis of (R)‐ or (S)‐2‐Hydroxybutyrate from l‐Threonine through a Synthetic Biology Approach

An efficient multi‐enzyme cascade reaction for the synthesis of (R)‐ or (S)‐2‐hydroxybutyric acid [(R)‐ or (S)‐2‐HB] from l ‐threonine was developed by using recombinant Escherichia coli cells expressing separately or co‐expressing l ‐threonine deaminase from Escherichia coli K‐12 (ilvA), formate dehydrogenase (FDH) from Candida boidinii and l ‐lactate dehydrogenase (l ‐LDH) from Oryctolagus cuniculus or d ‐lactate dehydrogenase (d ‐LDH) from Staphylococcus epidermidis ATCC 12228. Up to 750 mM of l ‐threonine were completely transformed to (R)‐ or (S)‐2‐HB in optically pure form (>99% ee) with high isolated yields. This one‐pot multi‐enzyme transformation provides a new practical method for the synthesis of these important optically pure compounds.

     

Preparation of (R)‐Amines from Racemic Amines with an (S)‐Amine Transaminase from Bacillus megaterium

Screening was carried out to identify strains useful for the preparation of (R)‐1‐cyclopropylethylamine and (R)‐sec‐butylamine by resolution of the racemic amines with an (S)‐specific transaminase. Several Bacillus megaterium strains from our culture collection as well as several soil isolates were found to have the desired activity for the resolution of the racemic amines to give the (R)‐enantiomers. Using an extract of the best strain, Bacillus megaterium SC6394, the reaction was shown to be a transamination requiring pyruvate as amino acceptor and pyridoxal phosphate as a cofactor. Initial batches of both amines were produced using whole cells of Bacillus megaterium SC6394. The transaminase was purified to homogeneity to obtain N‐terminal as well as internal amino acid sequences. The sequences were used to design polymerase chain reaction (PCR) primers to enable cloning and expression of the transaminase in E. coli SC16578. In contrast to the original B. megaterium process, pH control and aeration were not required for the resolution of sec‐butylamine and an excess of pyruvate was not consumed by the recombinant cells. The resolution of sec‐butylamine (0.68 M) using whole cells of E. coli SC16578 was scaled up to give (R)‐sec‐butylamine⋅1/2 H₂SO₄ in 46.6% isolated yield with 99.2% ee. An alternative isolation procedure was also used to isolate (R)‐sec‐butylamine as the free base.     

Automated Synthesis of (rac)‐, (R)‐, and (S)‐[18F]Epifluorohydrin and Their Application for Developing PET Radiotracers Containing a 3‐[18F]Fluoro‐2‐hydroxypropyl Moiety

To introduce the 3‐[¹⁸F]fluoro‐2‐hydroxypropyl moiety into positron emission tomography (PET) radiotracers, we performed automated synthesis of (rac)‐, (R)‐, and (S)‐[¹⁸F]epifluorohydrin ([¹⁸F] 1 ) by nucleophilic displacement of (rac)‐, (R)‐, or (S)‐glycidyl tosylate with ¹⁸F^? and purification by distillation. The ring‐opening reaction of (R)‐ or (S)‐[¹⁸F] 1 with phenol precursors gave enantioenriched [¹⁸F]fluoroalkylated products without racemisation. We then synthesised (rac)‐, (R)‐, and (S)‐ 2‐{5‐[4‐(3‐[¹⁸F]fluoro‐2‐hydroxypropoxy)phenyl]‐2‐oxobenzo[d]oxazol‐3(2H)‐yl}‐N‐methyl‐N‐phenylacetamide ([¹⁸F] 6 ) as novel radiotracers for the PET imaging of translocator protein (18 kDa) and showed that (R)‐ and (S)‐[¹⁸F] 6 had different radioactivity uptake in mouse bone and liver. Thus, (rac)‐, (R)‐, and (S)‐[¹⁸F] 1 are effective radiolabelling reagents and can be used to develop PET radiotracers by examining the effects of chirality on their in vitro binding affinities and in vivo behaviour.     

Experimental and Computation Studies on Candida antarctica Lipase B‐Catalyzed Enantioselective Alcoholysis of 4‐Bromomethyl‐β‐lactone Leading to Enantiopure 4‐Bromo‐3‐hydroxybutanoate

Both enantiomers of optically pure 4‐bromo‐3‐hydroxybutanoate, which is an important chiral building block in the syntheses of various biologically active compounds including statins, were synthesized from rac‐4‐bromomethyl‐β‐lactone through kinetic resolution. Candida antarctica lipase B (CAL‐B) enantioselectively catalyzes the ring opening of the β‐lactone with ethanol to yield ethyl (R)‐4‐bromo‐3‐hydroxybutanoate with high enantioselectivity (E>200). The unreacted (S)‐4‐bromomethyl‐β‐lactone was converted to ethyl (S)‐4‐bromo‐3‐hydroxybutanoate (>99% ee), which can be further transformed to ethyl (R)‐4‐cyano‐3‐hydroxybutanoate, through an acid‐catalyzed ring opening in ethanol. Molecular modeling revealed that the stereocenter of the fast‐reacting enantiomer, (R)‐bromomethyl‐β‐lactone, is ∼2 Å from the reacting carbonyl carbon. In addition, the slow‐reacting enantiomer, (S)‐4‐bromomethyl‐β‐lactone, encounters steric hindrance between the bromo substituent and the side chain of the Leu278 residue, while the fast‐reacting enantiomer does not have any steric clash.     

Chemical Synthesis of the Epimeric (23R)‐ and (23S)‐Fluoro Derivatives of Bile Acids via Horner–Wadsworth–Emmons Reaction

A method for the synthesis of two (23R)‐ and (23S)‐epimeric pairs of 23‐fluoro‐3α,7α,12α‐trihydroxy‐5β‐cholan‐24‐oic acid and 23‐fluoro‐3α,7α‐dihydroxy‐5β‐cholan‐24‐oic acid is described. The key intermediates, 23,24‐dinor‐22‐aldehyde peracetates were prepared from cholic and chenodeoxycholic acids via the 24‐nor‐22‐ene, 24‐nor‐22ξ,23‐epoxy, and 23,24‐dinor‐22‐aldehyde derivatives. The Horner–Wadsworth–Emmons reaction of the 23,24‐dinor‐22‐aldehydes using triethyl 2‐fluoro‐2‐phosphonoacetate in the presence of LiCl and 1,8‐diazabicyclo[5,4,0]undec‐7‐ene (DBU), and subsequent hydrogenation of the resulting 23ξ‐fluoro‐22‐ene ethyl esters, followed by hydrolysis, gave a mixture of the epimeric (23R)‐ and (23S)‐fluorinated bile acids which were resolved efficiently by preparative RP‐HPLC. The stereochemical configuration of the fluorine atom at C‐23 in the newly synthesized compounds was confirmed directly by the X‐ray crystallographic data. The ¹H and ¹³C NMR spectral differences between the (23R)‐ and (23S)‐epimers were also discussed.     

(R/S)‐BINOL‐α‐Phosphoryloxy Enecarbamate‐Mediated and (R/S)‐Titanium(IV) BINOLates‐Catalyzed Enantioselective Intramolecular Heck/Aza‐Diels–Alder Cycloaddition (IHADA): An Expedient Methodology

An (R/S)‐titanium(IV) BINOLate‐catalyzed highly enantioselective intramolecular Heck/aza‐Diels–Alder cycloaddition (IHADA) cascade was developed to prepare tetrahydropyridoindoles (tHPs) and octahydropyrazinopyridoindoles (oHPPs) from in situ generated (R/S)‐BINOL α‐phosphoryloxy carbamate ( αPPC2 ) in one pot. Chiral cooperativity between (R/S)‐αPPC2 and (R/S)‐titanium(IV) BINOLate was observed and successfully utilized for the construction of various tHPs (7 examples) and oHPPs (17 examples).

     

Nitrile Hydratase Activity of a Recombinant Nitrilase

Appreciable amounts of amide are formed in the course of nitrile hydrolysis in the presence of recombinant nitrilase from Pseudomonas fluorescens EBC 191, depending on the α‐substituent and the reaction conditions. The ratio of the nitrilase and nitrile hydratase activities of the enzyme is profoundly influenced by the electronic and steric properties of the reactant. In general, amide formation increased when the α‐substituent was electron‐deficient; 2‐chloro‐2‐phenylacetonitrile, for example, afforded 89 % amide. We found, moreover, that (R)‐mandelonitrile was hydrolysed with 11 % of amide formation whereas 55 % amide was formed from the (S)‐enantiomer; a similar effect was found for the O‐acetyl derivatives. A mechanism that accomodates our results is proposed.