共查询到20条相似文献,搜索用时 31 毫秒
1.
Muhammad Akhlaqur Rahman Khan Md. Ruhul Amin Shamim Mahbub Md. Masud Alam Malik Abdul Rub Md. Anamul Hoque Mohammed Abdullah Khan Abdullah M. Asiri 《Journal of surfactants and detergents》2019,22(3):613-623
Cloud point (CP) measurements of 4-(1,1,3,3-tetramethylbutyl) phenyl-polyethyleneglycol (Triton X-100 (TX-100)) were performed in aqueous solution in the presence of drug Amikacin sulfate (AS)/Neomycin sulfate (NS)/(AS/NS+ different inorganic salts). In aqueous solution, the CP values of TX-100 first decrease with increasing concentration and then increase with increasing surfactant concentration. The CP values of TX-100 solutions were found to increase with the increasing concentration of the AS/NS drug. The CP values of TX-100-AS/NS mixtures were also observed to decrease with the increase of the concentration of salt. Different thermodynamic parameters such as standard free energy (), standard enthalpy () as well as the standard entropy () change of phase separation were calculated and discussed in relation to molecular interactions. 相似文献
2.
The influence of sodium benzoate (Na-Bz) on micellization behavior of the cationic surfactant tetradecyltrimethylammonium bromide (TTAB) in aqueous media of trisubstituted imidazolium-based ionic liquid (IL), 1,2-dimethyl-3-octylimidazolium chloride [odmim][Cl], was investigated using conductometry, tensiometry, fluorescence,1H NMR, Dynamic Light Scattering (DLS), and Rheology techniques. It was observed that with an increase in salt concentration, the critical micelle concentration (CMC) values of the system decrease. The CMC and various thermodynamic parameters like standard Gibbs free energy of micellization (), standard enthalpy change (), and standard entropy change () were calculated using conductometry and surface parameters such as surface pressure at the interface (Пcac), maximum surface excess concentration (Гmax), minimum surface area per molecule (Amin), and pC20 (adsorption efficiency) were calculated using the tensiometry technique. The aggregation number (Nagg) was calculated using fluorescence measurements. 1H NMR spectra shed light on interactions between the salt and the cationic surfactant in 0.1 wt% IL. DLS gives information about the size distribution of micelles in solution at different concentrations of salt. 相似文献
3.
Asaduzzaman Nur Shamim Mahbub Mohammad Majibur Rahman Farah Khan Malik Abdul Rub Md. Anamul Hoque Mohammed Abdullah Khan Naved Azum Abdullah M. Asiri 《Journal of surfactants and detergents》2020,23(5):903-911
The interaction of an anionic textile dye, acid red 151 (AR), with a cationic surfactant, cetyltrimethylammonium bromide (CTAB), in aqueous electrolyte medium (e.g., KCl, NaCl) and in H2O + ethanol medium was observed using the conductometric method. Two critical micelle concentrations (CMC) were found for the AR + CTAB system in water and H2O + ethanol medium, but only one CMC was detected for AR + CTAB in salt+H2O media and for pure CTAB in all solutions. The change in CMC behavior of CTAB in the presence of AR indicates the occurrence of strong interaction between AR and CTAB. The extent of solubility increases with an increase of temperature, which disfavors micellization. The CMC values in NaCl solution are comparatively lower than those found in KCl solution, which signifies that the micelle formation is more favorable in attendance of NaCl. In aqueous ethanol solution, two CMC values were also observed for AR + CTAB that are higher than those obtained in water. The free energy of micellization () was negative, which illustrates a thermodynamically spontaneous micellization process. The values of enthalpy () and entropy () of micellization show that the process was entirely entropically driven at a lower temperature; but, enthalpic events are favored at elevated temperature in electrolyte medium, whereas both enthalpy and entropy are reduced in attendance of ethanol. In aqueous medium, the thermodynamic parameters signify the presence of electrostatic interaction between AR and CTAB at higher temperatures, while the hydrophobic interaction is the main driving force at a lower temperature. A linear expression of as a function of demonstrates enthalpy-entropy compensation over the experimental conditions employed in this study. 相似文献
4.
Xinhua Zhu Xuhong Jia Yuqiang Zhang Yuzhen Luo Haidong Bo 《Journal of surfactants and detergents》2020,23(5):873-881
A novel short fluorocarbon chain cationic surfactant has been synthesized to reduce the bioaccumulation of traditional fluorocarbon surfactants and maintain excellent surface properties simultaneously. The structure, surface activity, and micelle formation of surfactants have been investigated by surface tension, conductivity, dynamic light scattering, steady-state fluorescence, Fourier transform infrared spectroscopy, and Nuclear magnetic resonance. The novel surfactant (yield more than 81%) exhibited good surface activity, the critical micelle concentration and surface tension were below 2.35 mmol L−1 and 20.54 mN m−1 in the range of temperature from 288 to 303 K, respectively. The surface tension decreased to 17.45 mN m−1 with an increase in temperature. The thermodynamic parameters (, and ) of micellization for surfactants were evaluated, which implying the micellization process was contributed primarily by the entropy driving. In addition, the aggregation behavior of surfactants was also studied in detail, which demonstrated a small micelle aggregation number of 9.40 and large size distribution of 164–342 nm. 相似文献
5.
Arifa Shaheen Ab Waheed Mir Rabia Arif Ritu Bala 《Journal of surfactants and detergents》2021,24(6):575-585
The micellar, surface, and aggregation properties of biocompatible, imidazolium-based hydroxyl group-containing gemini surfactants, 1,1′-(propane-1,3-diyl-2-ol) bis(3-alkyl-1H-imidazol-3-ium)bromide, [CnIm-3OH-ImCn]Br2, were studied. The surface parameters like maximum surface excess concentration at air/water interface (Γmax), the minimum surface area occupied by surfactant molecules (Amin) and the related thermodynamic parameters such as, standard Gibbs free energy of micellization (), standard free energy of adsorption (), and free energy of surface at equilibrium ) were also determined from the surface parameters. The aggregation behavior has been elucidated from transmission electron microscopy (TEM) and dynamic light scattering (DLS) techniques which showed that these gemini surfactants have potential self-aggregation efficiency. Besides, some other physicochemical properties like foam stability, emulsifying power, and viscosity have been determined. The structural features of [CnIm-3OH-ImCn]Br2 enhance their surface-active properties. These features of gemini surfactants are of primary significance from pharmaceutical and biomedical viewpoints. The gemini surfactants may have great implications in drug formulations and delivery owing to their prominent aggregation and non-cytotoxic nature. 相似文献
6.
Suvarcha Chauhan Anand Kumar Manglam Santosh Kumari Pooja Kaundal Chittor N. Sundaresan 《Journal of surfactants and detergents》2020,23(1):195-206
In this article, we report intermolecular interactions in terms of the effect of benzfused heterocyclic compounds, i.e., 2-thioureidobenzimidazole and 2-thioureidobenzoxazole (0.00, 0.01, and 0.05 mol kg−1), on the micellization behavior of sodium dodecylsulphate (SDS) (1–52 mmol kg−1) in dimethylsulphoxide (DMSO) at different temperatures (293.15–313.15 K) through conductometric and spectroscopic investigations. The variation of specific conductance with SDS concentration has been utilized to estimate the critical micelle concentration ( CMC). The above-performed techniques infer that the presence of additives results in a decrease in the CMC values. Various standard thermodynamic parameters such as free energy change (), enthalpy change (), and entropy change () of micellization have been determined using the temperature dependence of CMC. The above calculated parameters and also UV–visible and fluorescence spectroscopy have been used to obtain information regarding the various interactions between the compounds and surfactant aggregates. In addition, an attempt has also been made to examine the minimum inhibitory concentration (MIC) of the heterocompounds, which indicates the effectiveness of these compounds against fungus growth at a particular concentration. These synthetic heterocyclic compounds find increasing applications in material science, medicinal chemistry, and biochemistry due to their antifungal and antioxidant properties. 相似文献
7.
Mingwei Gao Xu Guo Peng Liu Mingwei Zhao Hui Yin Caili Dai 《Journal of surfactants and detergents》2022,25(2):217-226
The aggregation behavior of N-decyl-N-methylmorpholinium bromide (DMMB) in aqueous solutions was systematically investigated by experimental measurements and molecular simulation, including surface tension, electrical conductivity, fluorescence measurement, 1H NMR and dissipative particle dynamic (DPD) simulation. The critical micelle concentration (cmc) of DMMB which was obtained by different techniques showed a pretty good agreement. From the surface tension measurements, a series of surface adsorption properties such as surface tension at the cmc (γcmc), effectiveness of surface tension reduction (∏cmc), maximum surface excess concentration (Γmax), minimum surface area per molecule (Amin), were determined. The cmc values and a variety of thermodynamic parameters (, and ) of micellization in the temperature range of 25–45°C were obtained via electrical conductivity experiments. In the investigated temperature range, the thermodynamic parameters reveal that micelle formation is entropy-driven. Furthermore, micelle aggregation number (Nagg) of DMMB was calculated through the fluorescence measurement. Analysis of the 1H NMR spectrum indicates the micelle formation mechanism. The DPD simulation reflects the process of micro-phase separation. From the simulation results, at concentrations higher than cmc, spherical micelles can be formed. The investigation of DMMB micelles may help us gain a better understanding about surfactant micellization process and expand the range of potential application in materials science. 相似文献
8.
Jinglin Tan Jufang Shao Cuiping Tian Zhiman Liao Ping Yan 《Journal of surfactants and detergents》2019,22(1):125-130
The effect of sodium halide on aggregation behavior of four cationic silicone surfactants, Si3mamCl, Si4mamCl, Si4PyCl, and Si4minCl, in solution was investigated using surface tension and conductivity measurements. The ability of sodium halide (NaCl, NaBr, and NaI) to reduce critical micelle concentration (CMC) values was in the order NaI > NaBr > NaCl. However, the γCMC values of the cationic silicone surfactants, Si4mamCl, Si4PyCl and Si4minCl, in sodium halide solution are almost the same as those of the salt-free system. The values of and are negative, indicating that the micellization process and adsorption of the four cationic silicone surfactants at the air-solution interface are spontaneous. 相似文献
9.
Shamim Mahbub Marzia Rahman Shahed Rana Malik Abdul Rub Md. Anamul Hoque Mohammed Abdullah Khan Abdullah M. Asiri 《Journal of surfactants and detergents》2019,22(1):137-152
A conductometric study of the mixed micellization behavior between cetyltrimethylammonium bromide (CTAB, a cationic surfactant) and sodium dodecyl sulfate (SDS, an anionic surfactant) was carried out in the absence/presence of various percentages of chitosan in the temperature range of 298.15–318.15 K. The deviations of critical micelle concentration (cmc) from the ideal values indicate the interaction between CTAB and SDS. The micellar mole fraction values according to different proposed models X1Rub (Rubingh), X1M (Motomura), X1Rod (Rodenas), and X1id (ideal mole fraction) were estimated and the results obtained reveal the high contribution of CTAB in the mixed micellization, which enhances with the increase of the mole fraction of CTAB. The negative magnitudes of indicate the spontaneous formation of mixed micelles between CTAB and SDS. The values of activity coefficients (f1 and f2) were less than unity and the values of the interaction parameter (β) are negative in all cases, which indicate the attractive interaction between CTAB and SDS. The negative values of excess free energy of micellization (ΔGex) signify the stability of the mixed micelles. The negative values of in the chitosan systems indicate that micellization is exothermic. The values of were found to be positive in all cases. 相似文献
10.
Parampaul K. Banipal Pallavi Sohal Sonika Arti Tarlok S. Banipal 《Journal of surfactants and detergents》2020,23(2):305-318
Surfactant micelles mimic the microenvironment present in biological systems and can act as a medium for antioxidant studies. Moreover, the thermodynamic profile of micellization and spectroscopic studies provides very good information about interactions in these systems. Thus, the mixed micellar behavior of sodium dodecylsulfate (SDS) and cetyltrimethylammonium bromide (CTAB) at varying mole fractions of SDS was studied in (0.01, 0.02, and 0.03) mol kg−1 ʟ-ascorbic acid(aq) solutions with the aid of various techniques viz., conductivity, density and sound velocity, and spectroscopy. From the CMC values of the mixed surfactants, the degree of ionization (β) and thermodynamic parameters (, , and ) were evaluated at 298.15, 308.15, and 318.15 K. The UV absorption spectra were recorded in (1–3) × 10−4 mol kg−1 ʟ-ascorbic acid(aq) solutions at various mole fractions of SDS. The proton (1H) NMR spectra of mixed (SDS + CTAB) surfactants were studied in (0.01–0.03) mol kg−1 ʟ-ascorbic acid solutions. Hydrodynamic diameters (Dh) of mixed micellar aggregates were obtained from the dynamic light scattering (DLS) studies. The present studies suggest the predominance of ionic-hydrophilic interactions between the ionic head groups {O-SO3− or N+ (CH3)3} of surfactants and the polar (–OH, –C=O and –O–) sites of ʟ-ascorbic acid. 相似文献
11.
İkbal Sarıkaya Selçuk Bilgen Halide Akbaş 《Journal of surfactants and detergents》2019,22(6):1319-1330
N,N′-bis [3-(dodecanoylamino)propyl]-N,N,N′,N′-tetramethylhexane-1,6-diaminium dibromide is a cationic Gemini surfactant including quaternary ammonium salt with amide groups. Critical micelle concentration (CMC) and some thermodynamic parameters of the cationic Gemini surfactant were investigated using surface tension and conductivity methods. Mixed micellization of binary mixtures of the cationic Gemini surfactant with a conventional surfactant cetyl trimethylammonium bromide (CTAB) was investigated using the conductometric method at five different temperatures ranging from 303.15 to 323.15 K. CMC, micellar ionization degree (αm), counterion binding constant (g1), interaction parameter (β), and activity coefficients ( and ) of mixed systems were found out from data of conductivity at different mole fractions for all studied temperatures. Additionally, the effects of some inorganic salts with different concentrations on the surface properties of cationic Gemini surfactant were examined by surface tension measurements. Some surface properties of the pure cationic Gemini surfactant and mixed salts systems were calculated using the data of surface tension. 相似文献
12.
An approach based on experimental and theoretical methods was used to compare the self-assembly [i.e., determination of the critical micelle concentration (CMC), degree of ionization (α) and counterion binding (β)] of sodium dodecyl sulfate (SDS) and didodecyl dimethyl ammonium bromide (DDAB) in deionized water and 10 mM NaCl and 10 (vol) % trifluoroethanol solutions. Experimental methods consisted of electrical conductometry, tensiometry, fluorimetry, and determination of Krafft temperature. A critical analysis of the thermodynamics of self-assembly by the Gibbs–Helmholtz equation and the van't-Hoff rationale provided values of several parameters, such as the change of Gibbs free energy and enthalpy change of micellization ( and , respectively) and the Gibbs free energy of surfactant tail groups (∆G0trans). Interfacial properties, aggregation number (Nagg), micropolarity (I1/I3), microviscosity (η), packing parameter (P), dielectric constant (D), anisotropy (r), and Stern–Volmer binding constant (KSV) for SDS and DDAB in different temperatures and different systems were determined. 相似文献
13.
Rajni Aggarwal Sukhprit Singh Vedangana Saini Gurcharan Kaur 《Journal of surfactants and detergents》2019,22(1):33-46
A library of imidazolium-based gemini cationic bola amphiphiles was synthesized using a regioselective ring-opening reaction of glycidyl phenyl ether with imidazole under solvent-free conditions. The corresponding hexafluorophosphate (PF6−) and tetrafluoroborate (BF4−) counterion-containing amphiphiles were also synthesized and characterized using nuclear magnetic resonance (NMR) and mass spectroscopy. The micellar and interfacial parameters like the critical micelle concentration (CMC), surface pressure at the CMC (Пcmc), surface tension at CMC ( γcmc ), counterion binding (β), maximum surface excess concentration ( Γmax ), minimum area per molecule ( Amin ), standard free energy of micellization () and adsorption (), and Kraft temperature were evaluated using surface tension and conductometry methods in aqueous solution as well as in buffer solution. Dynamic light scattering (DLS) was used to determine the size of the micelles formed in the aqueous solution. Cytotoxicity tests were carried out on the C6 glioma cancerous brain cell line using the MTT assay (3-(4, 5-dimethylthiazole-2-yl)-2, 5-diphenyltetrazolium bromide) to evaluate the IC50 value of all the synthesized amphiphiles. Thermal stability of these amphiphiles was also evaluated using a thermal gravimetric analyzer (TGA). Economic way of synthesis, moderate thermal stability, a low value of CMC, and cytotoxicity of these amphiphiles will inspire new research in the field of nanobiotechnology and pharmaceutical industries. 相似文献
14.
In this work, we have synthesized a series of quaternary ammonium from amino alcohols and n-bromoalkanes. The compounds are referred to as CnEtOH, CnPrOH, and CniPrOH (where n = 12 and 14 carbons, EtOH = ethanol, PrOH = propanol, iPrOH = iso-propanol). Their structures were checked using the usual spectroscopic methods [1H, 13C nuclear magnetic resonance (NMR) and infrared (IR)]. Their physicochemical properties in aqueous solution were studied using conductivity, surface tension, and ultra violet (UV)–visible absorption spectroscopy measurements. This study was conducted to show the effect of the linear hydrophobic chain and the location of the OH polar group with respect to the N+ quaternary ammonium on the physicochemical properties of the surfactants. The comparison between the physicochemical properties of the surfactants studied shows a distinct effect of the position of the OH group on the critical micelle concentration (CMC), the ionization degree (α), the area occupied at the interface (Amin), the free energy of adsorption (), and the free energy of micellization (). The intermolecular interaction between the synthetic surfactants and the methyl orange (OM) dye is related to the degree of hydration of the micelle, proven by the hypsochromic displacement of OM wavelength (λmax) and ionization (α) of the micelles. The CMC, the degree of ionization, and the degree of hydration of the micelle follow the same trend. 相似文献
15.
In the present work, a rheological study of liquid soaps prepared from different mixture of surfactants as a function of surfactant type and concentration was performed. The curves of shear stress vs. shear rate and viscosity vs. shear rate were recorded at constant temperature, 294 ± 0.1 K. The surface activity properties were also studied. The results of the study showed that values of surface tension, γ, were in the range 31–40 mN m−1 and the critical micelle concentration (CMC), was of the order 10−4 mol L−1. The calculated maximum surface excess, Γmax, varied from 2.40 to 3.66 μmol m−2, while minimum area per molecule, Amin, varied from 41.1 (for amphoterics) to 81.4 Å2 (for nonionic surfactants). The standard free energy of micellization, −29.8 and −29.3 kJ mol−1 for anionic and amphoteric surfactants, respectively, were while values for nonionic surfactants varied between −31.8 and − 30.3 kJ mol−1. The free energy of adsorption, was the lowest for amphoteric surfactants (−37.9 kJ mol−1), followed by anionics (−40.4 kJ mol−1) and nonionics (−43.34 to −46.84 kJ mol−1), indicating that micellization process is spontaneous in the examined medium. The synthetized liquid soaps show pseudoplastic behavior and they achieved pipe flow. The results of this research indicate that flow behavior was affected significantly by the ionic charge of the surfactant and the ionic strength of the formulation, suggesting that the flow behavior could be changed by manipulating the choice of the surfactant and salinity. The pH value of all liquid soaps examined were weakly acidic, in the range of 5.0–6.4. 相似文献
16.
Anatoly I. Romanenko Galina E. Chebanova Michael V. Drozhzhin Ivan N. Katamanin Vladislav Y. Komarov M.-K. Han S.-J. Kim Tingting Chen Hongchao Wang 《Journal of the American Ceramic Society》2021,104(12):6242-6253
The temperature dependences of the electrical conductivity , Seebeck coefficient , and heat capacity Cp(T) of polycrystalline samples of Bi2Te3, Bi2Te3+1%CuI, and Bi2Te3+1%(CuI+1/2Pb) are investigated in the temperature range below room temperature. Based on the temperature dependences of all investigated physical properties, it is discovered that phase transition occurs at 120–200 K. Investigation of single crystals shows that anomalies in the electrical resistivity occur only across the crystal growth axis (across the well-conducting Bi–Te plane). Investigation of the low-temperature dependence of electrical conductivity shows that all polycrystalline samples exhibit quasi-two-dimensional electron transport. Additionally, quasi-two-dimensional transport is detected in single crystals based on anisotropy analysis (where is the resistivity along the crystal growth axis, and is resistivity across the crystal growth axis) and temperature dependence below 50 K. The Fermi energy is estimated using the temperature dependence of . It is discovered that an increase in at T > 200 K is associated with the phase transition. For single-crystal samples, the maximum thermoelectric figure of merit ZT, as observed along the crystal growth axis, increases with doping. A maximum ZT value of ∼1.1 is observed for the Bi2Te3+1%(CuI+1/2Pb) sample at room temperature (). 相似文献
17.
Qingshan Zhu Shiyu Zhao Ran Xu Yujun Feng Zhuo Xu Xiaoyong Wei 《Journal of the American Ceramic Society》2022,105(4):2634-2645
Antiferroelectric (AFE) ceramics are promising for applications in high-power density capacitors, transducers, etc. The forward switching field and backward switching field are critical performance indicators for AFE ceramics, and the coupling between the structure transition and domain orientation makes them different from the coercive field of ferroelectric (FE). Moreover, in practical applications, AFE ceramics are often required to operate at varying frequencies. However, systematic studies regarding the frequency dependence of and are insufficient. In this work, (PLZST) AFE ceramic was fabricated, and two empirical formulas (, ) were proposed to predict the frequency dependence of and . The formulas are based on the electric field–induced phase transition characteristics of AFE and the Kolmogorov–Avrami–Ishibashi domain nucleation-switching model. Furthermore, the dynamic hysteresis loops of PLZST at various frequencies (1–1000 Hz) and temperatures (–) were investigated. The results show that the electric field–induced phase transition of AFE ceramic is dominated by the coupling between the structural transition and domain orientation. The domain orientation hinders the structure transition, leading to an increase in and a decrease in as the frequency of applied electric field increases. Meanwhile, the domain growth process is affected by the structure of AFE, and the value of (domain growth dimensionality) increases with the stability of the AFE structure. For comparison, (PLBZST) relaxor FE ceramic was fabricated. Due to the high mobility of the microdomain, the dynamic hysteresis loop of PLBZST ceramic exhibits excellent frequency stability. The charge–discharge experiment with an ultrahigh equivalent frequency (100 kHz) was performed to investigate the frequency stability of energy release of PLZST and PLBZST. The results may provide guidance for research pertaining to ceramic capacitors with high-power density and high-frequency stability. 相似文献
18.
Manas Barai Manas Kumar Mandal Habiba Sultana Emili Manna Sourav Das Kaushik Nag Soumen Ghosh Anuttam Patra Amiya Kumar Panda 《Journal of surfactants and detergents》2020,23(5):891-902
Theoretical investigations on the micellization of mixtures of (i) amino acid-based anionic surfactants [AAS: N-dodecyl derivatives of aminomalonate, −aspartate, and -glutamate] and (ii) hexadecyltrimethylammonium bromide (HTAB), were carried out at different mole ratios. Variation in the theoretical values of critical micelle concentration (CMC), mole fraction of surfactants in the micellar phase (X), at the interface (Xσ), interaction parameters at the bulk/interface (βR/βσ), ideality/nonideality of the mixing processes, and activity coefficients (f) were evaluated using Rubingh, Rosen, Motomora, and Sarmoria-Puvvada-Blankschtein models. CMC values significantly deviate from the theroretically calculated values, indicating associative interaction. With increasing mole fraction of AAS (αAAS), the magnitude of the (βR/βσ) values gradually decreased, considered to attributable to hydrophobic interactions. With increasing αAAS, the micellar mole fraction of HTAB (X2) decreased insignificantly and X2 values were higher than those compared to AAS for all combinations, due to the dominance of HTAB in micelles. Micellar mole fraction at the ideal state of AAS () differed from micellar mole fraction of AAS (X1), indicating nonideality in the mixed micellization process. Gibbs free energy of micellization ( ∆Gm ) values are more negative than the free energy of micellization for ideal mixing (), indicating the micellization process is spontaneous. With increasing αAAS, the enthalpy of micellization (ΔHm) and entropy of micellization (ΔSm) values gradually increased, which indicates micellization is exothermic. The different physicochemical parameters of the mixed micelles are correlated with the variation in the spacer length between the two carboxylate groups of AAS. 相似文献
19.
The dynamic adsorption isotherms of CO2-EGR were measured by using an Intelligent Gravimetric Analysis system. In the initial CO2 injecting stage, all the injected CO2 enters into the adsorbent and the mole fraction of CH4 in the gas phase () is maintained at 1.0. The CH4 recovery factor () increases. The duration of this stage (tCD) depends on the selectivity of CO2 over CH4 (). An adsorbent with large has long tCD. In the second stage, the injected CO2 competes with CH4 for adsorption. The cumulative of the second stage is much larger than that of the initial stage. However, decreases sharply. in the whole CO2 injection is always larger than that before CO2 injection, suggesting that CH4 desorption results from the displacement of CO2 rather than from pressure depletion. 相似文献
20.
Prof. Dr. Lorna J. Smith Prof. Dr. Wilfred F. van Gunsteren Prof. Dr. Niels Hansen 《Chembiochem : a European journal of chemical biology》2021,22(6):1049-1064
Values of and order parameters derived from NMR relaxation measurements on proteins cannot be used straightforwardly to determine protein structure because they cannot be related to a single protein structure, but are defined in terms of an average over a conformational ensemble. Molecular dynamics simulation can generate a conformational ensemble and thus can be used to restrain and order parameters towards experimentally derived target values (exp) and (exp). Application of and order-parameter restraining MD simulation to bond vectors in 63 side chains of the protein hen egg white lysozyme using 51 (exp) target values and 28 (exp) target values shows that a conformational ensemble compatible with the experimentally derived data can be obtained by using this technique. It is observed that order-parameter restraining of C−H bonds in methyl groups is less reliable than order-parameter restraining because of the possibly less valid assumptions and approximations used to derive experimental (exp) values from NMR relaxation measurements and the necessity to adopt the assumption of uniform rotational motion of methyl C−H bonds around their symmetry axis and of the independence of these motions from each other. The restrained simulations demonstrate that side chains on the protein surface are highly dynamic. Any hydrogen bonds they form and that appear in any of four different crystal structures, are fluctuating with short lifetimes in solution. 相似文献