Interaction of a Novel Anionic Gemini Surfactant Containing a Triazine Ring with Cetyltrimethylammonium Bromide in Aqueous Solution

The interaction between a novel anionic gemini surfactant containing a triazine ring, denoted as C8‐G, and cetyltrimethylammonium bromide (CTAB) has been investigated in aqueous solution. The surface tension vs log. molar concentration plots of the individual surfactants and their mixtures were measured at different temperatures (298, 303, 308, and 313 K) by the drop volume method. The surface properties and the interaction parameters of the adsorption monolayer and the mixed micelle were obtained from the plot. The results showed that the CMC of the C8‐G/CTAB mixture reached a minimum value of 3.20 × 10^?5 mol/L when α_G (the mole fraction of C8‐G in the mixed system) was 0.7 at 308 K, and the minimum γ_CMC was 28.1 mN/m obtained for the molar ratio of 0.9 at 308 K. Interaction between the two components was strongest () when α_G was 0.7 at 303 K. All the C8‐G/CTAB mixtures exhibited synergism in both surface tension reduction efficiency and mixed micelle formation except when the mole fraction of C8‐G (α_G) was 0.1, 0.5 and 0.9 at 313 K, and became greatest for the molar ratio of 0.7 at 303 K. The C8‐G/CTAB mixtures exhibited synergism in surface tension reduction effectiveness for all the complex ratios at 303 K, α_G = 0.1, 0.3, 0.9 at 308 K and α_G = 0.7 at 313 K, whereas the other surfactant mixtures did not show this synergism.     

Aggregation Behavior of Sodium Dodecyl Sulfate and Cetyltrimethylammonium Bromide Mixtures in Aqueous/Chitosan Solution at Various Temperatures: An Experimental and Theoretical Approach

A conductometric study of the mixed micellization behavior between cetyltrimethylammonium bromide (CTAB, a cationic surfactant) and sodium dodecyl sulfate (SDS, an anionic surfactant) was carried out in the absence/presence of various percentages of chitosan in the temperature range of 298.15–318.15 K. The deviations of critical micelle concentration (cmc) from the ideal values indicate the interaction between CTAB and SDS. The micellar mole fraction values according to different proposed models X₁^Rub (Rubingh), X₁^M (Motomura), X₁^Rod (Rodenas), and X₁^id (ideal mole fraction) were estimated and the results obtained reveal the high contribution of CTAB in the mixed micellization, which enhances with the increase of the mole fraction of CTAB. The negative magnitudes of indicate the spontaneous formation of mixed micelles between CTAB and SDS. The values of activity coefficients (f₁ and f₂) were less than unity and the values of the interaction parameter (β) are negative in all cases, which indicate the attractive interaction between CTAB and SDS. The negative values of excess free energy of micellization (ΔG_ex) signify the stability of the mixed micelles. The negative values of in the chitosan systems indicate that micellization is exothermic. The values of were found to be positive in all cases.     

Interaction Between Cationic and Anionic Surfactants: Detergency and Foaming Properties of Mixed Systems

The micellar and interfacial behavior of mixtures of the anionic surfactant (alcohol ether sulfate, AES) with quaternary ammonium type cationic surfactants dodecyltrimethyl ammonium chloride (DTAC), dodecyl-(2-hydroxyethyl)-dimethyl ammonium chloride (DHDAC), dodecyl-di(2-hydroxyethyl)-methyl ammonium chloride (DHHAC) were investigated by means of surface tension measurements. Various physicochemical properties such as surface activity parameters (CMC, γ _CMC, Г _max, A _min), the micellar and interfacial compositions (x ₁ ^m , x ₁ ^σ ), interaction parameters (β ^m , β ^σ ), and activity coefficients ( \(f_{1}^{m}\) , \(f_{2}^{m}\) , \(f_{1}^{\sigma }\) , \(f_{2}^{\sigma }\) ) were evaluated. The influence of the hydroxyethyl groups of cationic surfactant component on the physicochemical properties of mixed systems has been analyzed. It is observed that the CMC values of the three mixed systems decrease with increases in the number of hydroxyethyl groups of the cationic surfactant component. From the results of β ^σ and β ^m values, the interactions between molecules for the three surfactant mixtures at the air/liquid interface increase in the following order DHHAC/AES < DHDAC/AES < DTAC/AES, but it is the opposite for the interactions in mixed micelles. The detergency and foaming properties of mixed systems were also studied. As expected, complex surfactant systems exhibit good detergency and foaming properties.     

The Effect of Ethanol on Nanostructures of Mixed Cationic and Anionic Surfactants

Micellization of tetradecyl trimethyl ammonium bromide (TTAB) and sodium dodecyl sulfate (SDS) in water–ethanol (ET) micellar solutions, with the weight percent of ET changing within the range 0–30, was studied by means of surface tension and conductivity measurements. Surface tension measurements also provided information about the dependence of the surface excess concentration, the minimum area per surfactant molecule, and the standard Gibbs energy of adsorption on the added weight percent of the organic solvent. Information about the degree of counterion dissociation and phase transition was obtained through conductivity measurements. Cyclic voltammetry (CV) and dynamic light scattering (DLS) was also employed to investigate the mixed micellar behavior of the binary mixtures. It was shown that an excess of cationic surfactant and ET resulted in a phase transition of vesicles and large micelles to mixed micelles. The regular solution theory approximation was used to determine various micellar parameters of ideal systems. The regular solution interaction parameter (β) suggests that the formation of mixed micelles is due to the synergistic interactions in the case of TTAB/SDS systems and becomes affected by the water/ET ratio.     

Synergistic Behavior of a Triblock Copolymer with Anionic and Cationic Surfactants in Aqueous Solution

The synergistic behavior of poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PEO) triblock copolymer in aqueous solution with the synthesized anionic surfactants [decyl sulfonate (A10), myristyl sulfonate (A14) and cetyl sulfonate (A16)] and cationic surfactants [decyl pyridinium bromide (C10), myristyl peridinium bromide (C14) and cetyl pyridinium bromide (C16)] was investigated using a surface tension technique at 25 °C. The results show that the CMC values of binary mixtures for anionic and cationic surfactants with the triblock copolymer are lower than that of single surfactants. The synergistic interaction between surfactant molecules and copolymer molecules in binary mixed solution enhance the adsorption of surfactant molecules at the interface. The micellar mole fractions (X _m) and the interaction parameter (β) of these surfactants in mixed micelles were determined.

A Systematic Study of Mixed Surfactant Solutions of a Cationic Ester-Bonded Dimeric Surfactant with Cationic, Anionic and Nonionic Monomeric Surfactants in Aqueous Media

A novel cationic biodegradable dimeric (gemini) surfactant, ethane-1,2-diyl bis(N,N-dimethyl-N-hexadecylammoniumacetoxy) dichloride (16-E2-16), containing an ester-linked spacer was synthesized. Its pure and mixed micellization properties with monomeric surfactants cetyl trimethyl ammonium chloride, cetyl pyridinium chloride, sodium dodecyl sulfate, sodium dodecyl benzene sulfonate, cetyl alcohol ethoxylate (20EO) and tert-octylphenol ethoxylate (9.5EO) were investigated by surface tension measurements at 30 °C. The critical micelle concentration (CMC) of 16-E2-16 is well below that of cetyl trimethyl ammonium chloride containing the same number of carbon atoms in the hydrophobic tail per polar head. At different mole fractions of the gemini surfactant, the CMCs of the gemini-conventional binary mixtures were determined and were found to be less than the ideal CMC values in all the cases indicating synergistic interactions. Aggregation number and Stern–Volmer constant, obtained by the fluorescence quenching technique, also support the synergistic behavior of the surfactant systems.     

Synergistic Interaction between Nonionic Octylphenol Polyoxyethylene Ethers and Effect of Hydrophilic Chain

The micellization of binary mixture composed of nonionic octylphenol polyoxyethylene ether (OP-n, n is the average number of oxyethylene unit) and its homologues, as well as the effect of hydrophilic chain were investigated. The tensiometry was adopted to determine the critical micelle concentration of binary surfactant mixture. According to the regular solution theory, some thermodynamic models were used to predict the parameters of micellization and the thermodynamic parameters. For all the three binary mixtures of nonionic/nonionic surfactants, each of which shows a nonideal mixing and can behave synergistically in aqueous solution. For both the mixture of OP-10/OP-7 and the mixture of OP-10/OP-4, the positive deviation of the mole fraction of surfactant in mixed micelle from its ideal value coexists with the negative deviation in the entire range of compositions in aqueous solution, while for the mixture of OP-7/OP-4, it only shows a positive deviation. Thermodynamic data indicate that for all the three binary surfactant mixtures, the process of micellization is entropically spontaneous, and the change of hydrophilic chain results in the difference in the stability of mixed micelle. The results can be explained by the steric effect, the hydrogen bonding and the hydration. The work helps with understanding the interaction between molecules and properties for some industrial products constituted by nonionic surfactant and its homologues.     

Mixed Micellization and Interfacial Properties of Ionic Liquid‐Type Imidazolium Gemini Surfactant with Amphiphilic Drug Amitriptyline Hydrochloride and its Thermodynamics

The thermodynamics of mixed micellization of amitriptyline hydrochloride (AMT) with ionic liquid‐type imidazolium gemini surfactant ([C₁₀‐4‐C₁₀im] Br₂), was investigated at different mole fractions and temperatures by surface tension measurements. The deviation of the critical micelle concentration (CMC) from the ideal critical micelle concentration (CMC * ), micellar mole fraction () from ideal micellar mole fraction (), the values of interaction parameter () and activity coefficients () (for both mixed micelles and mixed monolayer) explained the non‐ideal behavior (i.e., synergistic behavior) of binary mixtures. The excess free energy (?G_ex) for the AMT‐[C₁₀‐4‐C₁₀im] Br₂ binary mixtures explained the mixed micelles stability in comparison to micelles of [C₁₀‐4‐C₁₀im] Br₂ and pure AMT. Interfacial parameters, i.e., Gibbs surface excess (), minimum head group area at air/water interface (), free energy of micellization (), and standard Gibbs energy of adsorption (?G_ads^o) were also evaluated for the systems. The standard entropy of adsorption (?S_ads^o) was found higher than the standard entropy of micellization (?S_m^o) at all mole fractions of AMT (α₁).     

四氟乙烯五聚体氧基苯磺酸钠与辛基三乙基溴化铵的相互作用

研究不同摩尔比的正负离子碳氢-碳氟表面活性剂——辛基三乙基溴化铵〔C8H17N(CH2CH3)3Br,C8NE〕与四氟乙烯五聚体氧基苯磺酸钠(C10F19OC6H4SO3Na,6201)混合溶液的表面张力,得到其临界胶束浓度(CMC)、最低表面张力(γCMC)、总饱和吸附量、不同表面张力时表面吸附层的组成;利用Gibbs-Duhem方程求得CMC处的胶团组成。采用规则溶液理论计算胶团中分子间相互作用参数(βm)以及CMC后的胶团组成。C8NE-6201复配体系的CMC明显小于单体系,这与βm负值很大相符(胶团内分子相互作用强)。但复配体系γCMC较6201单体系变化很小,这可能由于6201疏水链过长导致和C8NE复配后溶解性较差。6201自身的强疏水性使其成为表面吸附层和胶团在初始形成时的主导组分,而反电性C8NE参与提供协同作用。但是CMC后的胶团组成中6201的摩尔分数x6201m基本维持在0.6~0.7附近,说明对于CMC后胶团的形成正负电性作用占主导。     

Micellization Studies of Dicationic Gemini Surfactants (m-2-m Type) in the Presence of Various Counter- and Co-Ions

Salts have the ability to influence the water activity and self-association of ionic micelles. In the present case, gemini surfactants; ethanediyl-α,ω-bis(dimethyl alkyl ammonium bromide) (referred to as m-2-m, m = 10, 12, 14) are synthesized and their micellization study in aqueous medium in presence of monovalent inorganic (NaBr, NaNO₃, NaCl, KCl, LiCl) and organic salts (NaTos, NaBenz, NaSal) at 303 K is systematically investigated by conductometric and tensiometric methods. All the salts have the tendency to lower the critical micelle concentration of the surfactants. The effect of inorganic salts on the micellization properties has been found to obey the Hofmeister series. Organic salts reduce the CMC more effectively as compared to inorganic salts. The theoretical models of Rubingh and Rosen have been used to compare the results and obtain the interaction parameters, minimum area per molecule, surface excess, mixed micelle composition, activity coefficients and free energies of micellization/adsorption.     

Surface Properties and Solubility Enhancement of Anionic/Nonionic Surfactant Mixtures Based on Sulfonate Gemini Surfactants

As a class of novel surfactants, Gemini surfactants usually exhibit fairly excellent interfacial properties in aqueous solutions on account of the unique structure. They have significant application and development potential for industrial production. However, the mixing properties of Gemini surfactants with conventional surfactants are the key to their application. The equilibrium surface tension curves of anionic/nonionic surfactant mixtures based on the sulfonate Gemini surfactant (SGS-12) were measured using the Wilhelmy Plate method. The parameters of surface adsorption, the interaction parameters between anionic and nonionic surfactants, and the thermodynamic parameters of micelle formation were calculated from the corresponding equations. In addition, the dynamic surface tension (DST) curves of anionic/nonionic surfactant mixtures were examined through bubble profile analysis, and the diffusion performance parameters were acquired from empirical formulas. The solubilization of pyrene in micelle solutions was studied using UV–vis absorption spectroscopy. The results show that the interaction parameters of all anionic/nonionic surfactants are negative, indicating that there is a synergistic effect on reducing the surface tension. For the SGS-12/OP-10, SGS-12/Tween 80, SGS-12/AEO9, and SGS-12/APG0810 mixtures, the optimum mixing ratios are 6:4, 7:3, 7:3, and 8:2, respectively. The thermodynamic data of micelles show that the formation of mixed micelles for SGS-12/APG0810 mixtures is an enthalpy-driven process. The tendency of DST curves of the SGS-12/APG0810 mixture is similar to that of SGS-12. In comparison with single-surfactant solutions, the anionic/nonionic surfactant mixtures show stronger solubilization capacity toward pyrene.     

A Comparative Study on the Aggregation and Thermodynamic Properties of Anionic Sodium Dodecylsulphate and Cationic Cetyltrimethylammonium Bromide in Aqueous Medium: Effect of the Co-solvent N-Methylacetamide

The effect of co‐solvent N‐methylacetamide (NMA) (0.035, 0.046, 0.127, and 0.258 mol kg^?1) on the micellization behaviour of anionic surfactant sodium dodecylsulphate (SDS) (3.21–10.35 mmol kg^?1) and cationic surfactant cetyltrimethylammonium bromide (CTAB) (0.19–3.72 mmol kg^?1) in aqueous solution was explored by employing conductivity measurements at different temperatures (298.15–313.15 K). The critical micelle concentration (CMC) values for SDS and CTAB in aqueous solutions of NMA were determined from the conductivity versus surfactant concentration plots. The variations in the CMC values of SDS with NMA concentration are in striking contrast to those observed in the case of CTAB. The various relevant thermodynamic parameters of micellization, viz. standard enthalpy change, ΔH_m^o, standard entropy change, ΔS_m^o, and standard Gibbs free energy change, ΔG_m^o, were determined using the temperature variation of the CMC values and counterion binding. The results not only relate these thermodynamic parameters to the consequences of intermolecular interactions but are also able to differentiate between SDS–water–NMA and CTAB–water–NMA systems in terms of contributions from head groups as well as alkyl chains of surfactants.     

金属离子(Na+、K+、Mg2+、Ca2+)与鸟嘌呤活性位点相互作用的理论研究

本文用量子化学从头算方法对金属离子与碱基活性位点的相互作用及其形成配合物的结构和性质进行理论研究.用HF/6-311G*优化鸟嘌呤及其金属离子(Na 、K 、Mg2 、Ca2 )配合物.在HF水平上,运用6-311G*基组计算Ⅰa和Ⅱa族金属离子(Na 、K 、Mg2 、Ca2 )与鸟嘌吟(Guanine)活性位点的相互作用.结果表明:Mg2 、Ca2 离子引起配位体的变形较Na 、K 离子大;Mg2 、Ca2 离子配合物比Na 、K 离子配合物稳定.     

The Effect of Polar Head and Chain Length on the Physicochemical Properties of Micellization and Adsorption of Amino Alcohol-Based Surfactants

In this work, we have synthesized a series of quaternary ammonium from amino alcohols and n-bromoalkanes. The compounds are referred to as C_nEtOH, C_nPrOH, and C_niPrOH (where n = 12 and 14 carbons, EtOH = ethanol, PrOH = propanol, iPrOH = iso-propanol). Their structures were checked using the usual spectroscopic methods [¹H, ¹³C nuclear magnetic resonance (NMR) and infrared (IR)]. Their physicochemical properties in aqueous solution were studied using conductivity, surface tension, and ultra violet (UV)–visible absorption spectroscopy measurements. This study was conducted to show the effect of the linear hydrophobic chain and the location of the OH polar group with respect to the N⁺ quaternary ammonium on the physicochemical properties of the surfactants. The comparison between the physicochemical properties of the surfactants studied shows a distinct effect of the position of the OH group on the critical micelle concentration (CMC), the ionization degree (α), the area occupied at the interface (A_min), the free energy of adsorption (), and the free energy of micellization (). The intermolecular interaction between the synthetic surfactants and the methyl orange (OM) dye is related to the degree of hydration of the micelle, proven by the hypsochromic displacement of OM wavelength (λ_max) and ionization (α) of the micelles. The CMC, the degree of ionization, and the degree of hydration of the micelle follow the same trend.     

Conductometric Probe Analysis of the Effect of Benzyldimethylhexadecylammonium Chloride on the Micellization Behavior of Dodecyltrimethylammonium Bromide in Aqueous/Urea Solution: Investigation of Concentration and Temperature Effect

Surfactant mixtures are used in many different industrial formulations. In this study, the mixed micelle formation behavior of 2 different cationic surfactants, namely dodecyltrimethylammonium bromide (DTAB) and benzyldimethylhexadecylammonium chloride (BDHAC), in the absence and presence of urea at various temperatures (298.15–318.15 K) was studied using the conductometric method. The attractive interaction between DTAB and BDHAC was estimated from the values of critical micelle concentration (CMC) and the CMC for ideal mixing (CMC^id). Urea increases the CMC value as a result of the enrichment in the surface charge of the micelles/mixed micelles. The values of micellar mole fraction (X₁^Rub [Rubingh], X₁^M [Motomura], X₁^Rod [Rodenas]) and ideal micellar (X₁^id) of surfactant BDHAC were obtained by different models and are shown to exhibit the high contribution or effective involvement of BDHAC in mixed micelles and increase with increasing BDHAC mole fraction (α₁). Activity coefficients (f₁ and f₂) were also evaluated from the relevant formula given in the literature. The negative values of the interaction parameters (β) show the attractive interaction among the studied components. Excess Gibbs free energy (?G_ex) of micellization revealed that the stability of mixed micelles is higher in aqueous solution than in urea solution. The thermodynamic parameters, namely the Gibbs free energy change, enthalpy change, and entropy change (?G^o_m, ΔH^o_m, and ?S^o_m, respectively), were also calculated from the conventional standard equations.     

Salt Effect on Mixed Micelle and Interfacial Properties of Conventional Cationic Surfactants and the Ionic Liquid Surfactant 1-Tetradecyl-3-methylimidazolium Bromide ([C14mim]Br)

The surface properties and mixed micellization behavior of binary combinations of an ionic liquid surfactant, namely, 1-tetradecyl-3-methylimidazolium bromide ([C₁₄mim]Br) with common cationic surfactants viz. tetradecyltrimethylammonium bromide and tetradecylpyridinium bromide in the presence of sodium bromide (NaBr) were investigated by surface tension and conductivity measurements. The critical micelle concentration (CMC) and interfacial parameters, such as the maximum surface excess (Γ_max), minimum area per molecule (A_min) and surface pressure at the CMC (π_CMC) were determined from the surface tension data. The CMC and Γ_max values were found to decrease with increasing salt concentrations. The $ \Updelta G_{\text{ad}}^{ \circ } $ and $ \Updelta G_{\text{m}}^{ \circ } $ values are negative indicating the spontaneity of micelle formation.     

光谱法研究氟虫腈与牛血清白蛋白的相互作用

在模拟人体生理亲件下,采用荧光光谱法和紫外可见吸收光谱法研究了氟虫腈与牛血清白蛋白的相互作用.结果表明,氟虫腈对牛血清白蛋白的内源荧光有一定的猝灭作用,由Stern-Volmer方程和Lineweaver-Burk方程分析处理实验数据,得到了结合作用的平衡常数、结合反应的热力学参数、结合位王、结合作用力类型等.     

The Effects of Dynamic Noncovalent Interaction between Surfactants and Additional Salt on the pH-Switchable Interfacial Tension Variations

The dynamic noncovalent interaction between the anionic surfactant sodium dodecyl benzene sulfonate (SDBS) and 1,3-diphenylguanidine (DPG) was employed to control the interfacial activity of the surfactant. At high HCl concentration (1000 mg L⁻¹), the SDBS/DPGⁿ⁺ system could reduce the water/oil interfacial tension (IFT) to 10⁻⁴ mN m⁻¹ order of magnitude, which was much lower than the IFT values in the SDBS/DPG⁺ system with a low HCl concentration (100 mg L⁻¹) and the individual SDBS system by three and four orders of magnitude, respectively. The pH-switchable protonation of amido groups in DPG molecules determines the SDBS/DPG molecular interaction and the amplitude of IFT reduction, which was confirmed by control experiments using two other surfactants (sodium dodecyl sulfate [SDS] and dodecyl trimethylammonium bromide [DTAB]). Moreover, the investigation of the NaCl and temperature effects on the IFT indicated the intensity of mixed SDBS/DPGⁿ⁺ adsorption layers at the water/oil interface.     

L-半胱氨酸与牛血清白蛋白相互作用的荧光光谱分析

运用荧光猝灭光谱、同步荧光光谱探讨了L-半胱氨酸（L-Cys）与牛血清白蛋白（BSA）的相互作用,并计算了猝灭常数、结合常数、结合位点数以及3个热力学参数△H、△G和△S。结果表明,L-Cys使BSA的内源荧光发生猝灭,BSA的发射峰从350nm蓝移到347．5nm,荧光猝灭机制为动态猝灭;L-Cys与BSA之间的作用力主要为疏水作用力;L-Cys对BSA结构的微环境有一定的影响。     

金属离子与鸟嘌呤活性位点相互作用的理论研究

本文用量子化学从头算方法对金属离子与碱基活性位点的相互作用及其形成配合物的结构和性质进行理论研究。先用HF/6-311G进行优化,再运用6-311G基组计算Ⅰa和Ⅱa族金属离子(Na 、K 、Mg2 、Ca2 )与鸟嘌呤(Guanine)活性位点的相互作用。结果表明:Mg2 、Ca2 离子引起配位体的变形较Na 、K 离子大;Mg2 、Ca2 离子配合物比Na 、K 离子配合物稳定。