Synthesis and characterization of some water soluble polymers

Homopolymers and copolymers of acrylamide (AA) and acrylic acid (AAc) were synthesized by the free radical solution polymerization technique. Feed ratios of the monomers were 85 : 15 (w/w), 65 : 35 (w/w), and 50 : 50 (w/w) of acrylamide and acrylic acid, respectively, for synthesis of copolymers. All reactions were carried out in aqueous media, except for the synthesis of polyacrylic acid, where the medium was n-butanol. Hydrogen peroxide, potassium persulfate, and benzoyl peroxide were used as initiators. The copolymers were purified by removing homopolymers. The homopolymers and copolymers were characterized by infrared (IR), ¹³C-nuclear magnetic resonance (NMR), ¹H-NMR, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and viscosity measurements. The fusion temperature and the energy change for various phase transitions were obtained from DSC measurements. The activation energy values for various stages of decomposition were calculated from TGA. The activation parameters for the viscous flow (i.e., free energy, enthalpy, and entropy of activation) were evaluated from the viscosity measurements. Voluminosity and Simha shape factor were also calculated for different systems. Effects of various concentrations of electrolytes, NaNO₃, and Al(NO₃)₃ on viscosity behavior were studied. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 45–56, 1997     

Hydrolytic degradation of poly(oxyethylene)–poly-(ε-caprolactone) multiblock copolymers

The degradation of poly(oxyethylene)–poly(ε-caprolactone) (POE–PCL) multiblock copolymers was investigated at 37°C in a 0.13M, pH 7.4 phosphate buffer selected to mimic in vivo conditions. The copolymers were obtained by coupling polycaprolactone diols and poly(ethylene glycol) diacids using dicyclohexylcarbodiimide as coupling agent. Various techniques, such as weighing, size exclusion chromatography, infrared, ¹H nuclear magnetic resonance, differential scanning calorimetry, and X-ray diffractometry, were used to monitor changes in total mass, water absorption, molar mass, thermal properties, degree of crystallinity, and composition. The results showed that introduction of POE sequences considerably increased the hydrophilicity of the copolymers as compared with PCL homopolymers. Nevertheless, the degradability of PCL sequences was not enhanced due to the phase separation between the two components. Significant morphological changes were also observed during the degradation. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 989–998, 1998     

Glass transition temperature of methyl methacrylate–ethyl α‐benzoyloxymethylacrylate copolymers

Poly(ethyl α‐benzoyloxymethylacrylate) (EBMA) and copolymers of methyl methacrylate (MMA) with EBMA have been prepared by free radical polymerization. Monomer precursors of ethyl α‐benzoyloxymethylacrylate have likewise been polymerized. Glass transition temperatures (T_g) of homo and copolymers have been determined by differential scanning calorimetry. The Johnston equation, which considers the influence of monomeric unit distribution on the copolymer glass transition temperature, has been used to explain the T_g behaviour. T_g12 has been calculated by the application of the Johnston equation, which gave a value markedly lower than the average value expected from the additive contribution of the T_g of the corresponding homopolymers. © 2000 Society of Chemical Industry     

Characterization of poly(3,3-bisethoxymethyl oxetane) and poly(3,3-bisazidomethyl oxetane) and their block copolymers

The homopolymers, poly(3,3-bisethoxymethyl oxetane) (polyBEMO), poly(3,3-bisazidomethyl oxetane) (polyBAMO), and triblock copolymers based on these homopolymers and a statistical copolymer center block composed of BAMO and 3-azidomethyl-3-methyl oxetane AMMO were synthesized and characterized by differential scanning calorimetry, modulus-temperature, optical microscopy, membrane osmometry, and solution and melt viscosity. The values of K and a for the Mark-Houwink equation were found to be 7.29 × 10^?3 mL/g and 0.80, respectively, for polyBEMO at 25°C using number-average molecular weights. Glass transition temperatures were in the range ?25 to ?40°C and melting temperatures were between 65 and 90°C for all polymers. The melting temperature was found to increase as expected with molecular weight. Melt viscosities of triblock copolymers with polyBAMO end blocks were at least an order of magnitude lower than those with polyBEMO end blocks and clear optically, suggesting that the polyBAMO-based triblock copolymers formed one phase in the melt, while the polyBEMO-based triblock materials (milk white) phase separated. The addition of filler raised the melt viscosity to a level between that predicted by the Guth-Smallwood and the Mooney equations.     

Preparation and thermal behavior of random poly(butylene terephthalate/azelate) copolyesters

Poly(butylene terephthalate), poly(butylene azelate), and poly(butylene terephthalate/butylene azelate) random copolymers of various compositions were synthesized in bulk using the well‐known two‐stage polycondensation procedure, and characterized in terms of chemical structure and molecular weight. The thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. As far as the thermal stability is concerned, it was found to be rather similar for all copolymers and homopolymers investigated. All the copolymers were found to be partially crystalline, and the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of melting temperature with respect to pure homopolymers. Flory's equation was found to describe the T_m–composition data and permitted to calculate the melting temperatures (T^°_m ) and the heats of fusion (ΔH_u) of both the completely crystalline homopolymers. Owing to the high crystallization rate, the glass transition was observable only for the copolymers containing from 30 to 70 mol % of the terephthalate units; even though the samples cannot be frozen in a completely amorphous state, the data obtained confirmed that the introduction of the aromatic units gave rise to an increase of T_g, due to a chain stiffening. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2694–2702, 1999     

Influence of diblock copolymer on the morphology and properties of polystyrene/poly(dimethylsiloxane) blends

Blends of polystyrene (PS) and poly(dimethylsiloxane) (PDMS), with and without diblock copolymers (PS‐b‐PDMS), were prepared by melt mixing. The melt rheology behavior of the blends was studied with a capillary rheometer. The morphology of the blends was examined with scanning electron microscopy. The miscibility of the blends was studied with differential scanning calorimetry. The morphology of PS/PDMS blends was modified by the addition of PS‐b‐PDMS copolymers and investigated as a function of the molar mass of the diblock copolymers, viscosity ratios and the processing conditions. As investigated, the observed morphology of the melt‐blended PS/PDMS pair unambiguously supported the interfacial activity of the diblock copolymers. When a few percent of the diblock copolymers blended together with the PS and PDMS homopolymers, the phase size was reduced and the phase dispersion was firmly stabilized against coalescence. The compatibilizing efficiency of the copolymers was strongly dependent on its molar mass. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2747–2757, 2004     

Blends containing amphiphilic polymers. V. Compatibilization of N‐alkylitaconamic acid‐co‐styrene copolymers with interacting polymers

The phase behavior of blends containing N‐alkylitaconamic acid‐co‐styrene copolymers (NAIA‐co‐S) with poly(N‐vinyl‐2‐pyrrolidone) (PVP) of two different weight average molecular weights (M _w ), poly(2‐vinylpyridine) (P2VPy) and poly(4‐vinylpyridine) (P4VPy), was analyzed by differential scanning calorimetry and Fourier transform infrared spectroscopy. Copolymers containing 80% S are miscible with PVP₁₀, PVP₂₄, and P4VPy over the whole range of composition. In the case of blends with P2VPy, miscibility is observed only for the first three members of the series, i.e., NEIA‐co‐S, NPIA‐co‐S, and NBIA‐co‐S. For copolymers containing hexyl to dodecyl moieties, phase separation is observed in blends with P2VPy. Copolymers containing 50% S are miscible over the whole range of composition irrespective of the homopolymer and the length of the side chain of the itaconamic moiety of the copolymer. This behavior is interpreted in terms of steric hindrance, in the sense that the copolymers with long side chains are not able to interact with the nitrogen of P2VPy because of the position in the aromatic ring. The interactions between copolymers and homopolymers are discussed in terms of specific interactions like hydrogen bonds between the itaconamic moiety and the different functional groups of the homopolymers, together with the hydrophobic interaction, which cannot be disregarded. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2512–2519, 2006     

Synthesis and properties of novel random and block copolymers composed of phthalimidine‐ and perfluoroisopropylidene‐polyarylether‐sulfones

A series of novel polyarylethersulfone (AB) _n block copolymers with different segment lengths have been synthesized by nucleophilic solution polycondensation of phenoxide‐terminated and fluorine‐terminated oligomers; random copolymers have been prepared over the whole composition ranges. The structures of the resultant copolymers have been confirmed by FTIR, ¹³C NMR spectra and differential scanning calorimetry (DSC). Compared with two homopolymers and random copolymers, the block copolymers of this study possess excellent thermal stability (5% thermal decomposition under nitrogen atmosphere above 500 °C) and high glass transition temperatures, and have a wide melt‐processing temperature range. They may become a new class of mouldable high performance thermoplastics. © 2001 Society of Chemical Industry     

Influence of the synthesis conditions on the structural and thermal properties of poly(l‐lactide)‐b‐poly(ethylene glycol)‐b‐poly(l‐lactide)

The poly(l ‐lactide)‐b‐poly(ethylene glycol)‐b‐poly(l ‐lactide) block copolymers (PLLA‐b‐PEG‐b‐PLLA) were synthesized in a toluene solution by the ring‐opening polymerization of 3,6‐dimethyl‐1,4‐dioxan‐2,5‐dione (LLA) with PEG as a macroinitiator or by transterification from the homopolymers [polylactide and PEG]. Two polymerization conditions were adopted: method A, which used an equimolar catalyst/initiator molar ratio (1–5 wt %), and method B, which used a catalyst content commonly reported in the literature (<0.05 wt %). Method A was more efficient in producing copolymers with a higher yield and monomer conversion, whereas method B resulted in a mixture of the copolymer and homopolymers. The copolymers achieved high molar masses and even presenting similar global compositions, the molar mass distribution and thermal properties depends on the polymerization method. For instance, the suppression of the PEG block crystallization was more noticeable for copolymer A. An experimental design was used to qualify the influence of the catalyst and homopolymer amounts on the transreactions. The catalyst concentration was shown to be the most important factor. Therefore, the effectiveness of method A to produce copolymers was partly due to the transreactions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40419.     

Copolymers of chosen alkyl methacrylates with N-phenylmaleimide and N-(4-halogenphenyl)maleimides: A UV-aging study

Homopolymers and copolymers of ethyl and butyl methacrylates with N-phenylmaleimide, N-(4-chlorophenyl)maleimide, and N-(4-bromophenyl)maleimide were synthesized by free-radical bulk polymerization with benzoyl peroxide as the initiator. The content of imide in the copolymers was about 5–10 or 7.5 wt %. The homopolymers and copolymers were irradiated with ultraviolet (UV) light in a climatic test chamber for various periods to study their aging behavior. After 100, 250, and 500 h, the structure, thermal stability, chemical resistance, and some physicomechanical properties were examined. The influence of UV radiation time on structure and the investigated properties of the homopolymers and copolymers were studied. The experimental results indicate that all investigated copolymers were resistant to UV radiation after 500 h. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3244–3250, 2001     

Quinoxaline/phenylquinoxaline copolymers

The thermal crosslinkability of the quinoxaline moiety incorporated within poly(phenylquinoxalines) was demonstrated by differential scanning calorimetry (DSC), torsional braid analysis (TBA), and high-temperature adhesive evaluation. Several homopolymers, random copolymers, and polymer blends were prepared and evaluated. A new bis(1,2-dicarbonyl) monomer, 4-(4-phenylglyoxalylphenoxy)phenylglyoxal hydrate, was prepared and reacted with 3,3′, 4,4′-tetraaminobiphenyl to provide a polymer where a phenyl group was located on alternating quinoxaline rings. The apparent T_g of this polymer was initially 280°C and increased to 360°C after exposure to 400°C for 0.5 hr in air.     

Copolymerization of bromophenylmaleimide with ethyl or butyl methacrylate

N‐p‐Bromophenylmaleimide (BrPMI) does not polymerize in solution by conventional free radical mechanism. However, it readily polymerized in bulk when mixed with a free radical initiator and heated in a microwave oven for 7–8 min. Copolymerization of ethyl methacrylate or butyl methacrylate with BrPMI was conducted in dioxane. The copolymers were characterized by IR and ¹H NMR spectroscopy and gel permeation chromatography. The monomer reactivity ratios were calculated by a non‐linear least‐square analysis. Thermal analysis indicated a great improvement in thermal stability of the copolymers compared with the methacrylate homopolymers. BrPMI was also polymerized in bulk in the DSC pan, which allowed the calculation of the activation energy of its polymerization. Copyright © 2003 Society of Chemical Industry     

Tailoring the swelling and glass‐transition temperature of acrylonitrile/hydroxyethyl acrylate copolymers

Novel polyacrylonitrile (PAN)‐co‐poly(hydroxyethyl acrylate) (PHEA) copolymers at three different compositions (8, 12, and 16 mol % PHEA) and their homopolymers were synthesized systematically by emulsion polymerization. Their chemical structures and compositions were elucidated by Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy. Intrinsic viscosity measurements revealed that the molecular weights of the copolymers were quite enough to form ductile films. The influence of the molar fraction of hydroxyethyl acrylate on the glass‐transition temperature (T_g) and mechanical properties was demonstrated by differential scanning calorimetry and tensile test results, respectively. Additionally, thermogravimetric analysis of copolymers was performed to investigate the degradation mechanism. The swelling behaviors and densities of the free‐standing copolymer films were also evaluated. This study showed that one can tailor the hydrogel properties, mechanical properties, and T_g's of copolymers by changing the monomer feed ratios. On the basis of our findings, PAN‐co‐PHEA copolymer films could be useful for various biomaterial applications requiring good mechanical properties, such as ophthalmic and tissue engineering and also drug and hormone delivery. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Dewetting and Adsorption in Homopolymer Films Containing Triblock Copolymers: Role of Chain Architecture and Anchoring Block Molar Fraction

Triblock copolymer additives are found to stabilize thin-film dewetting of B-type homopolymers with degree of polymerization (DOP) P deposited on silicon oxide. The triblock copolymers’ architectures are ABA and BAB, where A and B represent anchoring and nonadsorbing blocks with DOP's N _A and N _B, respectively. Upon adding 1 vol.% of the ABA additive, dewetting is only observed for anchoring block molar fractions, f _A, below 4%. Dewetting is arrested in films containing 1 vol.% ABA, BAB, or AB that have similar values of f _A ～ 8%, showing that chain architecture is not the only indicator of a successful additive. Compared with films containing diblock copolymers, the interfacial excess, z*, of triblock copolymers at the melt/substrate interface is relatively small as measured by low-energy forward-recoil spectrometry. Because adsorbed copolymers can reduce the capillary driving force for dewetting and participate in entanglements with matrix chains, the higher coverage and grafting density observed for diblock copolymers suggests that diblocks are more effective than triblocks in improving thin-film stability.     

Synthesis,physical and thermal characterization of phosphorus-containing homopolymers and copolymers based on 2,4-bis(4-aminophenoxy)-6-diethoxyphosphinyl-s-triazine

Novel phosphorus-containing homopolyimides, homopolyamides, and homopolyureas were prepared by reacting 2,4-bis(4-aminophenoxy)-6-diethoxyphosphinyl-s-triazine (BADT) with pyromellitic or benzophenone tetracarboxylic dianhydride, terephthaloyl chloride, and tolylene diisocyanate, respectively. In addition, the corresponding copolymers that contained approximately 3% phosphorus were prepared by reacting BADT and 4,4′-diaminodiphenyl sulfone with the aforementioned reagents. These polymers were characterized by inherent viscosity measurements, infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy as well as by differential thermal analysis (DTA) and dynamic thermogravimetric analysis (TGA). Their thermal properties were compared with those of the corresponding nonphosphorylated polymers. The copolymers were stable up to 233–272°C in nitrogen or air atmosphere. The homopolymers showed a relatively lower thermal stability. Furthermore, a model diimide, diamide, and diurea were synthesized from the reactions of BADT with phthalic anhydride, benzoyl chloride, and phenyl isocyanate, respectively. The physical and thermal characteristics of these model compounds were correlated with those of the corresponding homopolymers.     

Synthesis of copolymers containing opposite charged comonomers and their interactions with metal ions

Radical polymerization was used to synthesize three copolymers of [3‐(methacryloylamino)propyl]trimethylammonium chloride and methacrylic acid [P(MPTA‐co‐MA)]; three copolymers of MPTA and 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid [P(MPTA‐co‐APSA)], which had different feed monomer mole ratios but a constant total number of moles (0.03 mol); and the homopolymers poly(MPTA), poly(MA), and poly(APSA). The yields for all homopolymers and copolymers were over 70 and 90%, respectively. All products were dissolved in water, purified, and fractioned by an ultrafiltration membrane with different exclusion limits of the molecular weight (3,000, 10,000, 30,000, and 100,000 g mol^?1). All fractions were lyophilized. The polymeric materials were characterized by FTIR and ¹H‐NMR spectroscopy. The metal ion interaction with the hydrophilic polymers was determined as a function of the pH and the filtration factor. It was dependent on the pH, type of ligand group, and charge of the metal ion. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1715–1721, 2003     

Antibacterial poly{(4‐vinyl phenylboronic acid)‐co‐[2‐(dimethylamino)ethyl methacrylate]} copolymers and their application in water‐based paints

Herein, we report the synthesis of poly(4‐vinylphenylboronic acid) (PVPBA) and poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) homopolymers, copolymers, and their methyl, pentyl, and octyl quaternized forms as dopant in water‐based permanent antibacterial paints. Both quaternized and nonquaternized forms of P(VPBA‐co‐DMAEMA) copolymers have reflected higher MIC values relative to PDMAEMA homopolymers. High molecular weight copolymers were more active against Escherichia coli ATCC 25922, contrarily, lower molecular weight copolymers showed higher antibacterial activity against Staphylococcus aureus ATCC 25923. The paint films prepared with quaternized PDMAEMA homopolymers with a weight of 10% showed better antibacterial activity in water and airborne tests than the copolymers. However, it has been shown that the inadequate anti‐biofilm properties of homopolymer‐containing paint films are overcome with the VPBA content of the copolymer structure and the most effective antibacterial and anti‐biofilm properties have been obtained with paint films containing P(VPBA‐co‐5QDMAEMA) copolymers. These paint films, which can maintain antibacterial and anti‐biofilm properties for at least 1 year, have the potential to be an alternative to Ag/Cl based solid surfaces which require the active substance to be regenerated. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46245.     

Poly(DL-lactide)/poly(ethylene glycol) copolymer particles. I. Preparation and characterization

In this study, poly(DL -lactide)/poly(ethylene glycol) (PDLLA/PEG) copolymers were synthesized. First, PDLLA homopolymers with three different molecular weights (Mw_n: 7,300, 12,100 and 21,900) were synthesized by the ring opening polymerization of the dimer (i.e., DL-lactide) by using stannous chloride as catalyst. Average molecular weights of PDLLAs were determined by gel permeation chromatography (GPC). They were characterized by Fourier transform infrared and differential scanning calorimetry (DSC). These PDLLA homopolymers were then transesterified with PEG with a molecular weight range of 3,300–4,000. By changing the ratio of PEG to PDLLA, block copolymers with different chain structures were synthesized. DSC and GPC studies were performed to characterize these PDLLA/PEG copolymers. PDLLA and PDLLA/PEG particles in the size range of 2–10 μm were prepared by a modified solvent evaporation technique by using methylene chloride as solvent and methyl cellulose as emulsifier within the aqueous dispersion medium. Particle size was controlled by changing the solvent/polymer ratio, PDLLA molecular weight, and PEG content. Degradation of polymeric particles was investigated in a phosphate buffer at pH 7.4 and at 37°C. Particles prepared with low-molecular-weight PDLLAs degraded much faster. Introduction of PEG within the polymeric matrix caused a pronounced increase in the degradation rate. Bulk degradation was the dominant mechanism. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of temperature‐sensitive block copolymers from poly(N‐isopropylacrylamide) and 4‐methyl‐ε‐caprolactone or 4‐phenyl‐ε‐caprolactone

This study synthesizes thermally sensitive block copolymers poly(N‐isopropylacrylamide)‐b‐poly(4‐methyl‐ε‐caprolactone) (PNIPA‐b‐PMCL) and poly(N‐isopropylacrylamide)‐b‐poly(4‐phenyl‐ε‐caprolactone) (PNIPA‐b‐PBCL) by ring‐opening polymerization of 4‐methyl‐ε‐caprolactone (MCL) or 4‐phenyl‐ε‐caprolactone (BCL) initiated from hydroxy‐terminated poly(N‐isopropylacrylamide) (PNIPA) as the macroinitiator in the presence of SnOct₂ as the catalyst. This research prepares a PNIPA bearing a single terminal hydroxyl group by telomerization using 2‐hydroxyethanethiol (ME) as a chain‐transfer agent. These copolymers are characterized by differential scanning calorimetry (DSC), ¹H‐NMR, FTIR, and gel permeation chromatography (GPC). The thermal properties (T_g) of diblock copolymers depend on polymer compositions. Incorporating larger amount of MCL or BCL into the macromolecular backbone decreases T_g. Their solutions show transparent below a lower critical solution temperature (LCST) and opaque above the LCST. LCST values for the PNIPA‐b‐PMCL aqueous solution were observed to shift to lower temperature than that for PNIPA homopolymers. This work investigates their micellar characteristics in the aqueous phase by fluorescence spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS). The block copolymers formed micelles in the aqueous phase with critical micelle concentrations (CMCs) in the range of 0.29–2.74 mg L^?1, depending on polymer compositions, which dramatically affect micelle shape. Drug entrapment efficiency and drug loading content of micelles depend on block polymer compositions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of tetramethyl-p-silphenylenesiloxanedimethylsiloxane triblock copolymer by employing living anionic polymerization

Dimethylsiloxane-tetramethyl-p-silphenylenesiloxane-dimethylsiloxane (DMS-TMPS-DMS) triblock copolymer was synthesized by employing living anionic polymerization of hexamethylcyclotrisiloxane (D₃). Two synthetic methods were carried out for the polymerization. One of those methods was the anionic polymerization of D₃ initiated at the silanolate anion which was prepared from the terminal hydroxyl group of silanol-terminated TMPS prepolymer by reaction with n-butyllithium (method 1). The other was the coupling reaction of vinyl-terminated TMPS prepolymer with hydrosilyl-terminated DMS prepolymer obtained from the anionic polymerization of D₃ by using diphenylmethylsilanolate anion as initiator (method 2). In method 1, DMS contents of the copolymers ranged from 25.8 to 72.5 wt% and the values agreed with the ratio of D₃ to TMPS prepolymer. The weight-average molecular weights ranged from 1.36×10⁴ to 19.4×10⁴ and were close to the predicted values calculated from the $\text{M}\text{?}{}_{\mathrm{v}}$ of the TMPS prepolymer and the amount of D₃ added. In the case of method 2, weight-average molecular weights ranged from 19.5×10⁴ to 24.2×10⁴. The high molecular weight copolymer could thus be obtained by method 2. Intrinsic viscosity values of the triblock copolymers agreed with calculated values obtained by considering the copolymer as a binary mixture of these homopolymers. Differential scanning calorimetry and thermogravimetry were carried out on the triblock copolymers. The equilibrium melting temperatures of each of the copolymers were very close to that of poly-TMPS (160°C). The glass transition temperature and heat of fusion were decreased as the DMS content was increased. The thermogravimetric curves for the copolymers indicated that the thermal stability of the triblock copolymer was intermediate between the DMS and TMPS homopolymers.