Polyaramides containing arylene sulfone ether linkages

Polyamides containing arylene sulfone ether linkages were synthesized from 4,4′[sulfonybis (p-phenyleneoxy)] dibenzoyl chloride (SPCI), 3,3′-[sulfonylbis (p-phenyleneoxy)] dibenzoyl chloride (SMCl) and various aromatic diamines (ARD), by solution and interfacial polymerization techniques. In solution polymerization, the effect of various acid acceptors such as propylene oxide (PO), lithium hydroxide (LiOH) in the presence of lithium chloride (LiCl), and triethylamine (TEA) on teh molecular weight of the olyamides was studied. The effect of structure of studied. The effect of structur of various aromatic diamine sof molecular weight and thermal properties of polyamides was also studied. The polyamides prepared were characterized by solution viscosity, elemental analysis thermo-gravimetric analysis, differential scanning calorimetry, and x-ray diffraction. Physical and thermal properties of polyamides prepared from SPcl and Ard were compared with the polyamides prepared from SMCl and ARD.     

Synthesis and properties of novel polyamides containing sulfone‐ether linkages and xanthene cardo groups

In order to obtain polyamides with enhanced solubility and processability, as well as good mechanical and thermal properties, several novel polyamides containing sulfone‐ether linkages and xanthene cardo groups based on a new diamine monomer, 9,9‐bis[4‐(4‐aminophenoxy)phenyl]xanthene (BAPX), were investigated. The BAPX monomer was synthesized via a two‐step process consisting of an aromatic nucleophilic substitution reaction of readily available 4‐chloronitrobenzene with 9,9‐bis(4‐hydroxyphenyl)xanthene in the presence of potassium carbonate in N,N‐dimethylformamide, followed by catalytic reduction with hydrazine and Pd/C. Four novel aromatic polyamides containing sulfone‐ether linkages and xanthene cardo groups with inherent viscosities between 0.98 and 1.22 dL g^?1 were prepared by low‐temperature polycondensation of BAPX with 4,4′‐sulfonyldibenzoyl chloride, 4,4′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride, 3,3′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride and 4,4′‐[sulfonyl‐bis(2,6‐dimethyl‐1,4‐phenyleneoxy)]dibenzoyl chloride in N,N‐dimethylacetamide (DMAc) solution containing pyridine. All these new polyamides were amorphous and readily soluble in various polar solvents such as DMAc and N‐methylpyrrolidone. These polymers showed relatively high glass transition temperatures in the range 238–298 °C, almost no weight loss up to 450 °C in air or nitrogen atmosphere, decomposition temperatures at 10% weight loss ranging from 472 to 523 °C and 465 to 512 °C in nitrogen and air, respectively, and char yields at 800 °C in nitrogen higher than 50 wt%. Transparent, flexible and tough films of these polymers cast from DMAc solution exhibited tensile strengths ranging from 78 to 87 MPa, elongations at break from 9 to 13% and initial moduli from 1.7 to 2.2 GPa. Primary characterization of these novel polyamides shows that they might serve as new candidates for processable high‐performance polymeric materials. Copyright © 2010 Society of Chemical Industry     

Synthesis and characterization of new polyamides derived from 4‐(4′‐aminophenyl)urazole and aliphatic diacid chlorides

4‐(4′‐Aminophenyl)urazole (AmPU) was prepared from 4‐nitrobenzoic acid in six steps. The reaction of AmPU with acetyl chloride was performed in N,N‐dimethylacetamide solutions at different ratios, and the resulting disubstituted and trisubstituted amide derivatives were obtained in high yields and were used as models for polymerization reactions. Polycondensation reactions of AmPU with succinyl chloride, suberoyl chloride, and sebacoyl chloride were performed with conventional solution polymerization techniques in the presence of different catalysts, such as pyridine, triethylamine, and dibutyltin dilaurate, and led to the formation of novel aliphatic polyamides. The resulting novel polyamides had inherent viscosities of 0.11–0.22 dL/g in dimethylformamide or H₂SO₄ at 25°C. These polyamides were characterized with IR, ¹H‐NMR, elemental analysis, and thermogravimetric analysis. Some physical properties and structural characterization of these novel polyamides are reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3173–3185, 2004     

Synthesis and characterization of new polyamides derived from 1,3‐(4‐carboxy phenoxy) propane and aromatic diamines

Six new polyamides 5a‐f containing flexible trimethylene segments in the main chain were synthesized through the direct polycondensation reaction of 1,3‐(4‐carboxy phenoxy) propane 3 with six derivatives of aromatic diamines 4a‐f in a medium consisting of N‐methyl‐2‐pyrrolidone, triphenyl phosphite, calcium chloride, and pyridine. The polycondensation reaction produced a series of novel polyamides containing flexible trimethylene segments in the main chain in high yield with inherent viscosities between 0.32 and 0.68 dL/g. The resulted polymers were fully characterized by means of FTIR spectroscopy, elemental analyses, inherent viscosity, and solubility tests. Thermal properties of these polymers were investigated by using thermal gravimetric analysis (TGA) and differential thermal gravimetric (DTG). The glass‐transition temperatures of these polyamides were recorded between 165 and 190°C by differential scanning calorimetry, and the 10% weight loss temperatures were ranging from 360 to 430°C under nitrogen. 1,3‐(4‐Carboxy phenoxy) propane 3 was prepared from the reaction of 4‐hydroxy benzoic acid 1 with 1,3‐dibromo propane 2 in the presence of NaOH solution. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Some New Organometallic Polyamides based on Ferrocene

Three new polyamides containing ferrocene units in the main chain were synthesized via low temperature polycondensation route, reacting 1,1′-ferrocenedicarboxylic acid chloride with three different types of aromatic diamines. The products were characterized by their solubilities, elemental analysis, FTIR spectral analysis, differential scanning calorimetry, thermogravimetry and viscosity measurements. The glass transition temperatures of the polymers were found by DSC curves and the activation energies of pyrolysis were estimated from TG curves applying Horowitz and Metzger method. Among these, polyamide P-1 (prepared from 4-(4-aminophenyloxy)phenyl-4-aminobenzamide) was found soluble in some of the organic solvents at room temperature but has poor thermal stability. Polyamide P-2 (prepared from 1,2-di(para-aminophenyloxy)ethylene) was soluble on heating and is thermally stable. However, all of these were also miscible with concentrated H₂SO₄ forming red coloured solutions.

---

Graphical Abstract Ferrocenedicarbonyl chloride was reacted with three different types of aromatic diamines via solution polycondensation to get three new polyamides. Two of which were soluble in some organic solvents. The resulting polymers were characterized by their solubilities, viscosity measurements, elemental analysis, FTIR spectroscopy, differential scanning calorimetric and thermogravimetric studies.

     

Aromatic polyesters (polyarylates) containing arylene sulfone ether linkages

A series of soluble aromatic polyesters (polyarylates) containing arylene sulfone ether linkages and having inherent viscosities of 0.36–1.10 dl/g were prepared by the two-phase low temperature polycondensation of 4,4′-[sulfonyl-bis(p-phenyleneoxy)]dibenzoyl chloride and 3,3′-[sulfonylbis(p-phenyleneoxy)]-dibenzoyl chloride with various bisphenols in an organic solvent-aqueous alkaline solution system in the presence of a phase transfer catalyst. Bisphenols 4,4′-[sulfonylbis(p-phenyleneoxy)]diphenol and 3,3′-[sulfonylbis(p-phenyleneoxy)]-diphenol were synthesized in quantitative yields by an improved procedure. The aromatic polyesters prepared were characterized by infrared spectroscopy, elemental analysis, solution viscosity, thermogravimetric analysis, differential scanning calorimetry and X-ray diffraction. The polyesters prepared had glass transition temperatures in the range 150–230°C and initial decomposition temperatures of 397–491°C. They gave transparent, tough and flexible films by the solution casting technique.     

Synthesis,characterization, and soil biodegradation study of polyamides derived from the novel bioactive diacid monomer 5‐(2‐phthalimidoethanesulfonamido) isophthalic acid

A new bioactive diacid monomer, 5‐(2‐phthalimidoethanesulfonamido) isophthalic acid ( 6 ), was synthesized in three steps. This monomer can be regarded as biologically active aromatic diacid and may be used in the design of biodegradable and biological materials. This monomer was polymerized with several aromatic diamines by step‐growth polymerization to give a series of biodegradable and highly thermally stable polyamides (PAs) with good yield (70–82%) and moderate inherent viscosity between 0.38–0.68 dL/g in a system of triphenylphosphite/pyridine/N‐methyl‐2‐pyrolidone/CaCl_2. The new aromatic diacid 6 and all of the PAs derived from this diacid and aromatic diamines were characterized by Fourier transform infrared, ¹H‐NMR, ¹³C‐NMR, and elemental analysis techniques. The thermal stability of the PAs was determined by thermogravimetric analysis and differential scanning calorimetry techniques under a nitrogen atmosphere, and we found that they were moderately stable. The soil biodegradability behavior of 6 and all of the PAs derived from this diacid and aromatic diamines were investigated in culture media, and we found that the synthesized diacid 6 and all of the PAs were biodegradable under a natural environmental. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of aliphatic polyamides containing 4-phenylurazole linkages

4-Phenylurazole (1) was reacted with excess acetyl chloride in N,N-dimethylacetamide (DMAc) solution at room temperature. The reaction occurred in quantitative yield with acetylation of both of the N H bonds of the urazole group. This compound was characterized by IR, ¹ H NMR and elemental analysis, and was used as a model compound for the polymerization reaction. Solution polymerization of monomer (1) with adipoyl chloride (AC) and suberoyl chloride (SC) was performed in DMAc and chloroform in the presence of pyridine, and lead to the formation of a novel aliphatic polyamide with an inherent viscosity in the range of 0.108–0.396 dl g⁻¹. When interfacial polymerization of monomer (1) with suberoyl chloride was performed in DMAc/cyclohexane, a lower viscosity resulted. The resulting polymers are soluble in most organic solvents. Some structural characterization and physical properties of these novel polymers are reported. © 1999 Society of Chemical Industry     

Synthesis and properties of poly(phenylene sulfide)s containing carbonyl and sulfonyl groups

With a view to study and compare the properties of poly(phenyienc sulfide)s containing carbonyl and sulfonyl backbone units, 1,4-bis(phenylthio)-benzene, and bis(4-phenylthio)diphenyl sulfone, were prepared and subjected to Fricdel-Crafts type polycondensation with various aromatic diacid chlorides. The resulting polymers had inherent viscosities in the range 0.101—0.141 dl/g. These polymers were not soluble in common organic solvents and exhibited good thermal stabilities.     

Syntheses of functional condensation polymers. II. A polyamide having epoxy groups and its ring-opening derivatives

Polyamides having epoxy groups and their ring-opening derivatives were prepared and characterized, and some of their properties were investigated. Reaction conditions for the low-temperature polycondensation of cis-2,3-epoxysuccinyl chloride (ESC) with aromatic diamines and the interfacial copolycondensation of ESC and adipyl chloride (AC) with aromatic diamines were established to obtain a high molecular weight polyamide having epoxy groups. In addition, the ring-opening reactions of the epoxy groups in the polyamides were carried out with various amines in order to obtain polyamides having hydrophilic pendent groups such as amino and hydroxyl. It was found that the polyamides prepared by ring-opening reaction of the epoxy group with ethylenediamine (EDA) or ethanolamine (EA) had a higher affinity for moisture than those with hexamethylenediamine (HMD) or n-butylamine (n-BA), which might be ascribed to the distance of hydrophilic groups from the polyamide chain. Those polyamides having hydrophilic pendent groups decomposed upon heating at less than 200°C.     

Synthesis and properties of novel aromatic polyamides with xanthene cardo groups

Two novel monomers, 9,9‐bis[4‐(4‐carboxyphenoxy)phenyl]xanthene (BCAPX) and 9,9‐bis[4‐(4‐aminophenoxy)phenyl]xanthene (BAPX) were prepared in two main steps starting from nucleophilic substitution of 9,9‐bis(4‐hydroxyphenyl)xanthene (BHPX) with p‐fluorobenzonitrile and p‐chloronitrobenzene, respectively. Using triphenyl phosphite and pyridine as condensing agents, two series of polyamides containing xanthene cardo groups with the inherent viscosities (0.82–1.32 dL/g) were prepared by polycondensation from BCAPX with various aromatic diamines or from BAPX with various aromatic dicarboxylic acids in an N‐methyl‐2‐pyrrolidone (NMP) solution containing dissolved calcium chloride, respectively. All new polyamides were amorphous and readily soluble in various polar solvents such as N,N‐dimethylformamide (DMF), NMP, N,N‐dimethylacetamide (DMAc) and pyridine. These polymers showed relatively high glass transition temperatures between 264 and 308°C, decomposition temperatures at 10% weight loss ranging from 502 to 540°C and 488 to 515°C in nitrogen and air, respectively, and char yields at 800°C in nitrogen higher than 56%. Transparent, flexible, and tough films of these polymers cast from DMAc solutions exhibited tensile strengths ranging from 86 to 109 MPa, elongations at break from 13 to 22%, and initial moduli from 2.15 to 2.63 GPa. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Crosslinkable polyamide–imides

A series of polyamide–imides were prepared from aromatic diamines and substituted isophthaloyl chlorides containing unsaturated imide rings. Aromatic polyamides from isophthaloyl chloride were also prepared for comparison. The polyamide-imides gave enhanced solubility compared to the aromatic polyamides and there was no deterioration in thermal stability or T_g. The PAIs were crosslinked by heating at 280°C/4 h under nitrogen. After this heat treatment all the PAIs became insoluble and their mechanical properties increased substantially; their thermal behavior, as measured by DSC and TGA, changed as a function of their chemical structure.     

Preparation and characterization of new photoactive polyamides containing 4‐(4‐dimethylaminophenyl)urazole units

4‐(4‐dimethylaminophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( DAPTD ) was prepared from 4‐dimethylaminobenzoic acid in five steps. The compound DAPTD was reacted with excess acetyl chloride in N,N‐dimethylacetamide (DMAc) solution and gave 1,2‐bisacetyl‐4‐[4‐(dimethylaminophenyl)]‐1,2,4‐triazolidine‐3,5‐dione as a model compound. Solution polycondensation reactions of monomer with succinyl chloride (SucC), suberoyl chloride (SubC), and sebacoyl chloride (SebC) were performed under conventional solution polymerization techniques in the presence of triethylamine and pyridine as a catalyst in N‐methylpyrrolidone (NMP) and led to the formation of novel aliphatic polyamides. These novel polyamides have inherent viscosities in the range of 0.09–0.21 dL/g in N,N‐dimethylformamide (DMF) at 25°C. Fluorimetric studies of the model compound as well as polymers were performed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 947–954, 2007     

Synthesis of polyamides from sugar derived d-glucaric acid and xylylenediamines

d -Glucaric acid (GA) is the one of aldaric acids and is an important bio-based building block for polymers. In this study, poly(m-xylylene-acetyl glucaramide) and poly(p-xylylene-acetyl glucaramide) were synthesized from GA acetate and two kind of aromatic diamines by solution polymerization. The chemical structures of the polyamides were analyzed by nuclear magnetic resonance spectroscopy. The weight-average molecular weights ranged from 3.3 × 10³ to 1.15 × 10⁴ with a polydispersity of 1.6–1.9, depending on monomer ratio or monomer concentration in solution. The 10% decomposition temperature of the polymers was about 210 °C. Differential scanning calorimetry revealed that the polyamides exhibited no peaks attributed to crystallization or melting point, which indicated that the polyamides were amorphous. No crystalline pattern was observed in the X-ray diffractograms, supporting this result. Polarized optical microscopy observation revealed that the polyamides exhibited melting-like behavior at above 150 °C, which was attributed to glass-transition behavior. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47255.     

Facile synthesis of processable aromatic polyamides containing thioether units

Aromatic polyamides containing thioether units were synthesized by interfacial polycondensation of 4,4′‐thiodibenzoyl chloride (or 4,4′‐bis(4‐chloroformylphenylthio)benzene) with aromatic diamines containing a nitrile unit. Their structure was established using ¹H NMR and Fourier transform infrared spectroscopy. The inherent viscosities of the polyamides prepared with optimum synthesis conditions were in the range 0.71–0.84 dL g^?1. These polyamides showed excellent thermal properties with glass transition temperatures of 210.5–219.6 °C, melting temperatures of 313.8–315.0 °C and initial degradation temperatures of 440–459 °C. They could be processed by melting due to their relatively wide processing window. Their tensile strengths were 71.3–79.1 MPa, water absorption was 0.17–0.22 wt%, and melt flowability was in the range 64.5 to 315.2 Pa s and 68.5 to 422.3 Pa s at different shear rates. At the same time, they were soluble in aprotic solvents such as N‐methyl‐2‐pyrrolidone, dimethylformamide and dimethylsulfoxide. The results suggest that these aromatic polyamides containing thioether units represent a promising type of heat‐resistant and processable engineering plastic. © 2012 Society of Chemical Industry     

Synthesis and characterization of polyamide resins from soy-based dimer acids and different amides

A series of soy-based polyamides with different dimer acids and diamines were synthesized using a condensation polymerization technique. The molecular weight of polyamides prepared from 1,4-phenylenediamine increases greatly with a reaction temperature above 260°C. The physical properties of the polyamides, such as glass transition temperature (T_g), melting point (T_m), decomposition temperature (T_d), crystalline behavior, and mechanical strength strongly depend on their molecular weight and flexibility of diamines used. The aromatic-based polyamides have a higher T_g, T_m, T_d, and stronger mechanical strength than that of aliphatic-based polyamides. X-ray diffraction patterns of the samples indicate that all of the resins synthesized present a typical semicrystalline morphology. Polyamides made from hydrogenated dimer acid possess lower T_g and higher mechanical strength, compared with polyamides from unsaturated dimer acid with different dimer and trimer ratios. These results are analyzed and discussed in accordance with the influence of rigid aromatic segments and the microstructure of different dimer acids. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68:305–314, 1998     

Microwave-induced synthesis of partially aromatic polyamides via the Yamazaki phosphorylation reaction

Microwave irradiation was successfully applied to condensate aromatic diamines with linear aliphatic dicarboxylic acids through the Yamazaki phosphorylation reaction. Succinic, adipic, suberic, sebacic, and fumaric acids were reacted with p-phenylenediamine or 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene to produce P-series and T-series of partially aromatic polyamides. Medium to high yields (60–100%) were achieved after a very short polymerization time (30 or 40 s). The intrinsic viscosity of products range from 10 to 80 mL g^–1. The solubility of the T-series of polyimides has been improved due to the presence of the bulky phenylated diamine moiety. The chemical structure of the polyamides was confirmed by FTIR, ¹H and ¹³C NMR spectroscopy. Thermal properties were investigated using DSC and TGA techniques under inert atmosphere. Polyfumaramides (PF and TF) were recognized to be the most thermally stable polyamides (the highest IPDT values). However, these two polymers as well as polysuccinamides (P2 and T2) showed the lowest index of intrinsic thermal stability (ITS), i. e., although they have the highest refractoriness (the highest char yields), they began to decompose at relatively low temperatures. A crosslinking mechanism was proposed for the similar thermal behavior of the fumaramides and succinamides.     

Synthesis of Soluble,Curable, and Thermally Stable Aromatic Polyamides Bearing Thiourea and Pendent 4-Pyridylformylimino Groups

A new aromatic dicarboxylic acid monomer 4-pyridylformylimino-N-(phenyl,2′,5′ – dicarboxylic acid) (PPDC) containing pyridine and azomethine units was synthesized through a simple one-step condensation reaction between 2-aminoterephthalic acid and 4-pyridinecarboxaldehyde. A series of new polyamides was prepared through the direct one-pot phosphorylation polycondensation of PPDC with simple aromatic commercial diamines and diamines bearing phenylthiourea groups. The polyamides were characterized by FT-IR, ¹H-NMR, and ¹³C-NMR spectroscopy. Thermal stability of the polymers was evaluated using thermogravimetric analysis. The polyamides with inherent viscosities in the range of 0.30–0.51 dL/g showed an outstanding solubility in various solvents such as 1-methyl-2-pyrrolidone (NMP), dimethly sulfoxide (DMSO), N,N-dimethylformamide (DMF), N,N-dimetylacetamide (DMAc), and pyridine. The cured polyamides displayed significantly higher thermal stability than the uncured polyamides. The conductivity of the polyamides, when blended with 20% by weight of doped polyanilines, was in the range 3.09–4.21 × 10^?3 S cm^?1.     

Synthesis and characterization of aromatic–aliphatic polyamides

A new monomer, 2,5‐bis(4‐carboxy methylene phenyl)‐3,4‐diphenyl thiophene (V) has been synthesized and characterized by physical and spectroscopic methods. A series of eight aromatic–aliphatic polyamides was prepared from the (V) and different aromatic diamines using Yamazaki's direct phosphorylation reaction. The polyamides were characterized by IR spectroscopy, viscosity measurements, and thermal analysis. An excellent yield of these polyamides was obtained, with inherent viscosities in the range of 0.28 to 0.67 dL/g, and the polyamide were readily soluble in aprotic polar solvents such as N‐methyl‐2‐pyrrolidone, N‐N‐dimethyl acetamide, dimethyl sulphoxide, and so forth. Polyamides could be cast into transparent and flexible films. They had glass‐transition temperatures of 225–273°C. When evaluated by thermogravimetry, thermal analysis of the polyamides showed no weight loss below 311°C, and the char yield in air at 900°C was 55%–67%. The structure–property correlation among these polyamides is also discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 566–571, 2001     

Synthesis and characterization of aromatic polyamides containing an s‐triazine ring with thiophenoxy linkages

A series of aromatic polyamides containing an s‐triazine ring with thiophenoxy linkages was synthesized from two new diacids, namely 2,4‐bis‐(4‐carboxyphenoxy)‐6‐thiophenoxy‐s‐triazine and 2,4‐bis‐(3‐carboxyphenoxy)‐6‐thiophenoxy‐s‐triazine, and commercially available aromatic diamines by using Yamazaki's phosphorylation reaction. The polyamides were obtained in good yields and were characterized by solubility tests, viscosity measurements, FTIR, ¹H and ¹³C NMR spectroscopy, X‐ray diffraction studies and thermogravimetric analysis. The polyamides were found to have inherent viscosities in the range of 0.35 to 0.56 dl g^?1 in N,N‐dimethylacetamide (DMAc) at 30 ± 0.1 °C. All the polyamides were readily soluble in solvents such as DMAc, N‐methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide (DMF) and m‐cresol. Thermogravimetric analysis of the polyamides indicated no weight loss below 345 °C under a nitrogen atmosphere. Copyright © 2004 Society of Chemical Industry