Two-dimensional polymer nanosheets for efficient energy storage and conversion

As a promising graphene analogue, two-dimensional (2D) polymer nanosheets with unique 2D features, diversified topological structures and as well as tunable electronic properties, have received extensive attention in recent years. Here in this review, we summarized the recent research progress in the preparation methods of 2D polymer nanosheets, mainly including interfacial polymerization and solution polymerization. We also discussed the recent research advancements of 2D polymer nanosheets in the fields of energy storage and conversion applications, such as batteries, supercapacitors, electrocatalysis and photocatalysis. Finally, on the basis of their current development, we put forward the existing challenges and some personal perspectives.

     

Rapid room-temperature synthesis of a porphyrinic MOF for encapsulating metal nanoparticles

While metal nanoparticles(NPs)have shown great promising applications as heterogeneous catalysts,their agglomeration caused by thermodynamic instability is detrimental to the catalytic performance.To tackle this hurdle,we successfully prepared a functional and stable porphyrinic metal-organic framework(MOF),PCN-224-RT,as a host for encapsulating metal nanoparticles by direct stirring at room temperature.As a result,Pt@PCN-224-RT composites with well-dispersed Pt NPs can be constructed by introducing pre-synthesized Pt NPs into the precursor solution of PCN-224-RT.Of note,the rapid and simple stirring method in this work is more in line with the requirements of environmental friendly and industrialization compared with traditional solvothermal methods.     

Synthesis of magnetic two-dimensional materials by chemical vapor deposition

The development of magnetic two-dimensional (2D) materials in its infancy has generated an enormous amount of attention as it offers an ideal platform for the exploration of magnetic properties down to the 2D limit, paving the way for spintronic devices. Due to the nonnegligible advantages including time efficiency and simplified process, the facile bottom-up chemical vapor deposition (CVD) is regarded as a robust method to fabricate ultrathin magnetic nanosheets. Recently, some ultrathin magnets possessing fascinating properties have been successfully synthesized via CVD. Here, the recent researches toward magnetic 2D materials grown by CVD are systematically summarized with special emphasis on the fabrication methods. Then, heteroatoms doping and phase transition induced in CVD growth to bring or tune the magnetic properties in 2D materials are discussed. Characterizations and applications of these magnetic materials are also discussed and reviewed. Finally, some perspectives in need of urgent attention regarding the development of CVD-grown magnetic 2D materials are proposed.

     

Recent progress about 2D metal dichalcogenides: Synthesis and application in photodetectors

In recent years, two-dimensional (2D) layered metal dichalcogenides (MDCs) have received enormous attention on account of their excellent optoelectronic properties. Especially, various MDCs can be constructed into vertical/lateral heterostructures with many novel optical and electrical properties, exhibiting great potential for the application in photodetectors. Therefore, the batch production of 2D MDCs and their heterostructures is crucial for the practical application. Recently, the vapour phase methods have been proved to be dependable for growing large-scale MDCs and related heterostructures with high quality. In this paper, we summarize the latest progress about the synthesis of 2D MDCs and their heterostructures by vapour phase methods. Particular focus is paid to the control of influence factors during the vapour phase growth process. Furthermore, the application of MDCs and their heterostructures in photodetectors with outstanding performance is also outlined. Finally, the challenges and prospects for the future application are presented.

     

Nanovilli electrode boosts hydrogen evolution: A surface with superaerophobicity and superhydrophilicity

Although tremendous efforts have been paid on electrocatalysts toward efficient electrochemical hydrogen generation,breakthrough is still highly needed in the design and synthesis of wonderful non-precious-metal electrocatalyst.Herein,a nanovilli Ni2P electrode,which with superaerophobic and superhydropholic can significantly facilitate the mass and electron transfer was constructed via a facial morphology control strategy.Meanwhile,the substitution of sluggish oxygen evolution with urea oxidation,lowering the two-electrode cell voltage to only 1.48 volts to achieve a current density of 10 mA·cm^-2.Thus,the as-constructed electrode achieves the operation of hydrogen generation by an AA battery.This work sheds new light on the exploration of other high-efficient electrocatalysts for hydrogen generation by using intermittent clean energy.     

Polymersome formation by solvent annealing-induced structural reengineering under 3D soft confinement

A solvent annealing-induced structural reengineering approach is exploited to fabricate polymersomes from block copolymers that are hard to form vesicles through the traditional solution self-assembly route. More specifically, polystyrene-b-poly(4-vinyl pyridine) (PS-b-P4VP) particles with sphere-within-sphere structure (SS particles) are prepared by three-dimensional (3D) soft-confined assembly through emulsion-solvent evaporation, followed by 3D soft-confined solvent annealing upon the SS particles in aqueous dispersions for structural engineering. A water-miscible solvent (e.g., THF) is employed for annealing, which results in dramatic transitions of the assemblies, e.g., from SS particles to polymersomes. This approach works for PS-b-P4VP in a wide range of block ratios. Moreover, this method enables effective encapsulation/loading of cargoes such as fluorescent dyes and metal nanoparticles, which offers a new route to prepare polymersomes that could be applied for cargo release, diagnostic imaging, and nanoreactor, etc.

     

Highly efficient multi-metal catalysts for carbon dioxide reduction prepared from atomically sequenced metal organic frameworks

The precise control on the combination of multiple metal atoms in the structure of metal-organic frameworks(MOFs)endowed by reticular chemistry,allows the obtaining of materials with compositions that are programmed for achieving enhanced reactivity.The present work illustrates how through the transformation of MOFs with desired arrangements of metal cations,multi-metal spinel oxides with precise compositions can be obtained,and used as catalyst precursor for the reverse water-gas shift reaction.The differences in the spinel initial composition and structure,determined by neutron powder diffraction,influence the overall catalytic activity with changes in the process of in s itu formation of active,metal-oxide supported metal nanoparticles,which have been monitored and characterized with in situ X-ray diffraction and photoelectron spectroscopy studies.     

Coarse and fine-tuning of lasing transverse electromagnetic modes in coupled all-inorganic perovskite quantum dots

Inorganic perovskite lasers are of particular interest,with much recent work focusing on Fabry-P6rot cavity-forming nanowires.We demonstrate the direct observation of lasing from transverse electromagnetic(TEM)modes with a long coherence time-9.5ps in coupled CsPbBr₃ quantum dots,which dispense with an external cavity resonator and show how the wavelength of the modes can be controlled via two independent tuning-mechanisms.Controlling the pump power allowed us tofine-tune the TEM mode structure to the emission wavelength,thus providing a degree of control over the properties of the lasing signal.The temperature-tuning provided an additional degree of control over the wavelength of the lasing peak,importantly,maintained a constant full width at half maximum(FWHM)over the entire tuning range without mode-hopping.     

Ambipolar two-dimensional bismuth nanostructures in junction with bismuth oxychloride

Despite the unique properties of bismuth(Bi),there is a lack of two-dimensional(2D)heterostructures between Bi and other functional 2D materials.Here,a coherent strategy is reported to simultaneously synthesize rhombohedral phase Bi nanoflakes and bismuth oxychloride(BiOCI)nanosheets.The delicate balance between several reactions is mediated mainly for the reduction and chlorination in the chemical vapor transport(CVT)process.The Bi-BiOCI lateral heterostructures have been constructed via the coalescence of the two different 2D nanostructures.The characteristics of ambipolar conducting Bi and insulator-like BiOCI are elaborated by scanning microwave impedance microscopy(sMIM).This work demonstrates a way to construct a 2D Bi nanostructure in junction with its oxyhalide.     

Single copper sites dispersed on hierarchically porous carbon for improving oxygen reduction reaction towards zinc-air battery

The demand for high-performance non-precious-metal electrocatalysts to replace the noble metal-based catalysts for oxygen reduction reaction(ORR)is intensively increasing.Herein,single-atomic copper sites supported on N-doped three-dimensional hierarchically porous carbon catalyst(Cu₁/NC)was prepared by coordination pyrolysis strategy.Remarkably,the Cu₁/NC-900 catalyst not only exhibits excellent ORR performance with a half-wave potential of 0.894 V(vs.RHE)in alkaline media,outperforming those of commercial Pt/C(0.851 V)and Cu nanoparticles anchored on N-doped porous carbon(CuNPs/NC-900),but also demonstrates high stability and methanol tolerance.Moreover,the Cu₁/NC-900 based Zn-air battery exhibits higher power density,rechargeability and cyclic stability than the one based on Pt/C.Both experimental and theoretical investigations demonstrated that the excellent performance of the as-obtained Cu₁/NC-900 could be attributed to the synergistic effect between copper coordinated by three N atoms active sites and the neighbouring carbon defect,resulting in elevated Cu d-band centers of Cu atoms and facilitating intermediate desorption for ORR process.This study may lead towards the development of highly efficient non-noble metal catalysts for applications in electrochemical energy conversion.     

Multiple radial phosphorus segregations in GaAsP core-shell nanowires

Highly faceted geometries such as nanowires are prone toform self-formed features,especially those that are driven by segregation.Understanding these features is important in preventing their formation,understanding their effects on nanowire properties,or engineering them for applications.Single elemental segregation lines that run along the radii of the hexagonal cross-section have been a common observation in alloy semiconductor nanowires.Here,in GaAsP nanowires,two additional P rich bands are formed on either side of the primary band,resulting in a total of three segregation bands in the vicinity of three of the alternating radii.These bands are less intense than the primary band and their formation can be attributed to the inclined nanofacets that form in the vicinity of the vertices.The formation of the secondary bands requires a higher composition of P in the shell,and to be grown under conditions that increase the diffusivity difference between As and P.Furthermore,it is observed that the primary band can split into two narrow and parallel bands.This can take place in all six radii,making the cross sections to have up to a maximum of 18 radial segregation bands.With controlled growth,these features could be exploited to assemble multiple different quantum structures in a new dimension(circumferential direction)within nanowires.     

Direct aerobic oxidation of monoalcohol and diols to acetals using tandem Ru@MOF catalysts

The aerobic oxidation of monoalcohols and diols to acetals is an important academic and industrial challenge for the production of fine chemicals and intermediates.The existing methods usually rely on a two-step process in which alcohols are first oxidized to aldehydes over metal catalysts(Ru,Pt,Pd)and then acetalized using acids.Due to the instability of aldehydes,how to avoid over-oxidation to their respective carboxylic acids and esters is a long-standing challenge.For this reason,certain non-conjugated dialdehydes have never been successfully produced from diol oxidation.Hereby we report a Ru@metal-organic framework(MOF)tandem catalyst containing ultra-fine Ru nanoparticles(<2 nm)for direct alcohol to acetal conversion of monoalcohol and diols with noformation of carboxylic acids.Mechanistic study reveals that the presence of Lewis acid sites in the MOF work in concert with Ru active sites to promptly convert aldehydes to acetals thereby effectively suppressing the formation of over-oxidation byproducts.     

How defects influence the photoluminescence of TMDCs

Two-dimensional(2D)transition metal dichalcogenide(TMDC)monolayers,a class of ultrathin materials with a direct bandgap and high exciton binding energies,provide an ideal platform to study the photoluminescence(PL)of light-emitting devices.Atomically thin TMDCs usually contain various defects,which enrich the lattice structure and give rise to many intriguing properties.As the influences of defects can be either detrimental or beneficial,a comprehensive understanding of the internal mechanisms underlying defect behaviour is required for PL tailoring.Herein,recent advances in the defect influences on PL emission are summarized and discussed.Fundamental mechanisms are the focus of this review,such as radiative/nonradiative recombination kinetics and band structure modification.Both challenges and opportunities are present in the field of defect manipulation,and the exploration of mechanisms is expected tofacilitate the applications of 2D TMDCs in the future.     

Corrosion formation and phase transformation of nickel-iron hydroxide nanosheets array for efficient water oxidation

Designing earth-abundant electrocatalysts with high performance towards water oxidation is highly decisive for the sustainable energy technologies. This study develops a facile natural corrosion approach to fabricate nickel-iron hydroxides for water oxidation. The resulted electrode demonstrates an outstanding activity and stability with an overpotential of 275 mV to deliver 10 mA·cm⁻². Experimental and theoretical results suggest the corrosion-induced formation of hydroxides and their transformation to oxyhydroxides would account for this excellent performance. This work not only provides an interesting corrosion approach for the fabrication of excellent water oxidation electrode, but also bridges traditional corrosion engineering and novel materials fabrication, which would offer some insights in the innovative principles for nanomaterials and energy technologies.

     

Electronics based on two-dimensional materials: Status and outlook

Since Moore’s law in the traditional semiconductor industry is facing shocks, More Moore and More than Moore are proposed as two paths to maintain the development of the semiconductor industry by adopting new architectures or new materials, in which the former is committed to the continued scaling of transistors for performance enhancement, and the latter pursues the realization of functional diversification of electronic systems. Two-dimensional (2D) materials are supposed to play an important role in these two paths. In More Moore, the ultimate thin thickness and the dangling-bond-free surface of 2D channels offer excellent gate electrostatics while avoiding the degradation of carrier mobility at the same time, so that the transistors can be further scaled down for higher performance. In More than Moore, devices based on 2D materials can well meet the requirements of electronic systems for functional diversity, like that they can operate at high frequency, exhibit excellent sensitivity to the changes in the surroundings at room temperature, have good mechanical flexibility, and so on. In this review, we present the application of 2D materials in More Moore and More than Moore domains of electronics, outlining their potential as a technological option for logic electronics, memory electronics, radio-frequency electronics, sensing electronics, and flexible electronics.

     

Recent advances in engineered nanomaterials for acute kidney injury theranostics

Acute kidney injury(AKI),has become the focus of increasing attention due to its high risk of death.The early diagnosis and treatment of AKI significantly reduce the risk of renal tissue damage and kidney dysfunction.However,the efficient early diagnosis and treatment approach for AKI remains a challenge.AKI screening via precise nanomaterial theranostics is a new alternative approach.This study summarizes the recent advances in functional nanomaterials in the early detection and treatment of AKI.The challenges and problems in the use of nanomaterials for AKI in clinical applications are also discussed.It is anticipated that highlighting these new advances will lay the foundation for further translational research on the promising application of nanomaterials for AKI.     

Two-dimensional oxide derived from high-temperature liquid metals via bubble templating

Two-dimensional (2D) oxide can be continuously produced by bubbling oxygen into liquid metals and the harvesting of these oxide relies on the proper choice of dispersion solvents. The mass-production of ligand-free 2D materials from high melting-point metals will not be possible if the limited stability of the traditional dispersion solvents is not circumvented. Herein, liquid tin was used for the first time in the bubbling protocol and 2D tin oxide was obtained in molten salts. The nanosheets were studied with combined microscopic and spectroscopic techniques, and high-density grain boundaries was identified between the sub-5-nm nano-crystallites in the nanosheets. It gives rise to the high performance in electrocatalytic CO₂ reduction reaction. Density-functional-theory based calculation was applied to achieve a deeper understanding of the relationship between the activity, selectivity, and the grain-boundary features. The molten-salt based protocol could be explored for the synthesis of a library of functional 2D oxides.

     

Efficient photovoltaic effect in graphene/h-BN/silicon heterostructure self-powered photodetector

Graphene (Gr)/Si-based optoelectronic devices have attracted a lot of academic attention due to the simpler fabrication processes, low costs, and higher performance of their two-dimensional (2D)/three-dimensional (3D) hybrid interfaces in Schottky junction that promotes electron-hole separation. However, due to the built-in potential of Gr/Si as a photodetector, the I_ph /I_dark ratio is often hindered near zero-bias at relatively low illumination intensity. This is a major drawback in self-powered photodetectors. In this study, we have demonstrated a self-powered van der Waals heterostructure photodetector in the visible range using a Gr/hexagonal boron nitride (h-BN)/Si structure and clarified that the thin h-BN insertion can engineer asymmetric carrier transport and avoid interlayer coupling at the interface. The dark current was able to be suppressed by inserting an h-BN insulator layer, while maintaining the photocurrent with minimal decrease at near zero-bias. As a result, the normalized photocurrent-to-dark ratio (NPDR) is improved more than 10⁴ times. Also, both I_ph/I_dark ratio and detectivity, increase by more than 10⁴ times at −0.03 V drain voltage. The proposed Gr/h-BN/Si heterostructure is able to contribute to the introduction of next-generation photodetectors and photovoltaic devices based on graphene or silicon.

     

Pulsed laser reshaping and fragmentation of upconversion nanoparticles — from hexagonal prisms to 1D nanorods through “Medusa”-like structures

One dimensional (1D) nanostructures attract considerable attention, enabling a broad application owing to their unique properties. However, the precise mechanism of 1D morphology attainment remains a matter of debate. In this study, ultrafast picosecond (ps) laser-induced treatment on upconversion nanoparticles (UCNPs) is offered as a tool for 1D-nanostructures formation. Fragmentation, reshaping through recrystallization process and bioadaptation of initially hydrophobic (β-Na_1.5Y_1.5F₆: Yb³⁺, Tm³⁺/β-Na_1.5Y_1.5F₆) core/shell nanoparticles by means of one-step laser treatment in water are demonstrated. “True” 1D nanostructures through “Medusa”-like structures can be obtained, maintaining anti-Stokes luminescence functionalities. A matter of the one-dimensional UCNPs based on direction of energy migration processes is debated. The proposed laser treatment approach is suitable for fast UCNP surface modification and nano-to-nano transformation, that open unique opportunities to expand UCNP applications in industry and biomedicine.

     

Effect and mechanism of encapsulation on aging characteristics of quantum-dot light-emitting diodes

The aging characteristics,e.g.,the evolution of efficiency and luminance of quantum-dot light-emitting diodes(QLEDs)are greatly affected by the encapsulation.When encapsulated with ultraviolet curable resin,the efficiency is increased over time,a known phenomenon termed as positive aging which remains one of the unsolved mysteries.By developing a physical model and an analytical model,we identify that the efficiency improvement is mainly attributed to the suppression of hole leakage current that is resulted from the passivation of ZnMgO defects.When further encapsulated with desiccant,the positive aging effect vanishes.Tofully take the advantage of positive aging,the desiccant is incorporated after the positive aging process is completed.With the new encapsulation method,the QLED exhibits a high external quantum efficiency of 20.19%and a half lifetime of 1,267 h at an initial luminance of 2,800 cd·m^-2,which are improved by 1.4 and 6.0 folds,respectively,making it one of the best performing devices.Our work provides an in-depth and systematic understanding of the mechanism of positive aging and offers a practical encapsulation way for realizing efficient and stable QLEDs.