Radiation initiated synthesis of 2‐acrylamidoglycolic acid grafted carboxymethyl cellulose as pH‐sensitive hydrogel

This article exploits a new approach for synthesis of carboxymethyl cellulose/poly 2‐acrylamidoglycolic acid by graft and crosslinked copolymerization in aqueous solution by a simple one‐step using γ‐radiation. The reaction parameters affecting the equilibrium swelling, i.e., mass ratio of AG to CMC and irradiation dose were systematically optimized to achieve a superabsorbent hydrogel with a maximum swelling capacity. The structure, crystallinity, thermal stability, and surface morphology were characterized by Fourier transform infrared spectroscopy (FT‐IR) and elemental analysis, X‐ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), respectively. FTIR proved that the grafting reaction occurred between the hydroxyl group of CMC and PAG chain. The thermal analysis data show that the prepared hydrogel is more thermally stable than pure CMC. The swelling behaviors in distilled water in various pH solutions, temperature and various ionic salt solutions (NaCl as monovalent, CaCl₂ as divalent and FeCl₃ as trivalent) were investigated in detail. The effect of cationic salt solutions on the swelling had the following order: Na⁺ > Ca²⁺ > Fe³⁺. In addition, the pH‐reversibility was preliminarily investigated with alternating pH between 12 and 2. The equilibrium swelling of CMC/PAG was achieved in 70 min. The hydrogel was responsive to the pH and salts; it also has reversible swelling and deswelling character. POLYM. ENG. SCI., 54:2753–2761, 2014. © 2013 Society of Plastics Engineers     

Synthesis and properties of silk sericin-<Emphasis Type="Italic">g</Emphasis>-poly(acrylic acid-co-acrylamide) superabsorbent hydrogel

A novel superabsorbent hydrogel has been synthesized with the crosslinking graft copolymerization of acrylic acid (AA) and acrylamide onto the chain of silk sericin. Potassium persulfate (KPS)–sodium sulfite (NaHSO₃) as redox initiation system and N,N′-methylenebisacrylamide (MBA) as crosslinker were used. The structure of the product characterized by Fourier transform infrared absorption spectroscopy and the surface morphology of the hydrogel were observed by scanning electron microscopy. The certain parameters of the graft copolymerization including the monomer, the initiator, the crosslinker concentration, neutralization degree of AA, reaction temperature, and time were systematically optimized to achieve a hydrogel with maximum swelling capacity (2150 g/g). The optimal conditions were initiator 8 mmol/L, MBA 2.5 mmol/L, neutralization degree of AA 75%, reaction temperature 55 °C, and time 6 h. The swelling ratio in salt solutions was also determined (in 0.9% NaCl aqueous solution: 98 g/g). In addition, the swelling capability of the hydrogel was measured in solutions with pH ranged from 1 to 13. The synthesized hydrogel exhibited a pH-dependent character. Water absorbency of the product in aqueous chloride salt solutions has the Na⁺ > Ca²⁺ > Mg²⁺ > Al³⁺ order in the investigated concentration.     

Synthesis and superswelling behavior of carboxymethylcellulose–poly(sodium acrylate‐co‐acrylamide) hydrogel

In this paper, attention is paid to synthesis and swelling behavior of a superabsorbent hydrogel based carboxymethylcellulose (CMC) and polyacrylonitrile (PAN). The physical mixture of CMC and PAN was hydrolyzed in NaOH solution to yield hydrogel, CMC–poly(NaAA‐co‐AAm). During alkaline hydrolysis, the nitrile groups of PAN were completely converted to a mixture of hydrophilic carboxamide and carboxylate groups followed by in situ crosslinking of the grafted PAN chains. A proposed mechanism for hydrogel formation was suggested and the structure of the product was established using FTIR spectroscopy. The reaction variables affecting the swelling capacity of the hydrogel were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. Swelling measurements of the synthesized hydrogels in various chloride salt solutions indicated a swelling‐loss with increase in the ionic strength of the salt solutions. The pH of the various solutions also affected the swelling of the superabsorbent. Furthermore, the present hydrogels showed a pH‐reversible property. Finally, the swelling kinetics of synthesized hydrogels with various absorbent particle sizes was briefly examined. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Superabsorbent composite. XIII. Effects of Al3+‐attapulgite on hydrogel strength and swelling behaviors of poly(acrylic acid)/Al3+‐attapulgite superabsorbent composites

Al³⁺‐attapulgite (Al³⁺‐APT) was prepared by treating attapulgite (APT) with AlCl₃ aqueous solution of various concentrations. The poly(acrylic acid)/Al³⁺‐attapulgite (PAA/Al³⁺‐APT) superabsorbent composite was prepared by reaction of partly neutralized acrylic acid, and Al³⁺‐APT in aqueous solution using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. The surface morphology of the composite was investigated by SEM, and the Al³⁺‐APT composite generated a relatively planar surface comparing the nature APT. The effects of Al³⁺‐APT on hydrogel strength and swelling behaviors, such as equilibrium water absorbency, swelling rate, and reswelling capability, of the superabsorbent composites were also studied. The hydrogel strength and reswelling capability were improved, however, the equilibrium water absorbency and swelling rate decreased with increasing AlCl₃ solution concentration. The equilibrium water absorbency firstly increased, and then decreased with increasing Al³⁺‐APT content. The results indicate that Al³⁺‐APT acts as an assistant crosslinker in the polymeric network, which has great influences on hydrogel strength and swelling behaviors of the PAA/Al³⁺‐APT superabsorbent composites. POLYM. ENG. SCI., 47:619–624, 2007. © 2007 Society of Plastics Engineers.     

Synthesis,characterization, and swelling kinetic study of porous superabsorbent hydrogel nanocomposite based on sulfonated carboxymethylcellulose and silica nanoparticles

New superabsorbent nanocomposite was synthesized by free-radical graft polymerization of sulfonated-carboxymethyl cellulose (SCMC) with acrylic acid (AA) in the presence of polyvinylpyrrolidone (PVP) and silica nanoparticles. Carboxymethyl cellulose (CMC) was first sulfonated using chlorosulfonic acid, and then AA monomers were grafted onto SCMC. FTIR results confirmed that sulfonation of CMC as well as grafting of AA monomers onto SCMC has been performed successfully. Moreover, the presence of silica nanoparticles into superabsorbent nanocomposite was evaluated with EDX analysis. The element mappings show a homogenous distribution of silica nanoparticles throughout the hydrogel nanocomposite. SEM images exhibited porous morphology for hydrogel nanocomposite, which was due to the incorporation of PVP in its network. The experimental findings from TGA analysis indicated that incorporation of PVP and silica nanoparticles into the hydrogel network improved thermal stability of superabsorbent nanocomposite. Swelling kinetic studies revealed that superabsorbent nanocomposite hydrogel had higher equilibrium swelling capacity and swelling rate compared with the neat hydrogel sample. Besides that, superabsorbent nanocomposite depicted excellent salt and pH-sensitive behavior in different saline and pH solutions. As a consequence, this hydrogel nanocomposite acts as useful water reservoir, which might be most profitable in agricultural applications.     

Modified carrageenan. 4. Synthesis and swelling behavior of crosslinked κC‐g‐AMPS superabsorbent hydrogel with antisalt and pH‐responsiveness properties

To synthesize a novel biopolymer‐based superabsorbent hydrogel, 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) was grafted onto kappa‐carrageenan (κC) backbones. The graft copolymerization reaction was carried out in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator, N,N,N′,N′‐tetramethyl ethylenediamine (TMEDA) as an accelerator, and N,N′‐methylene bisacrylamide (MBA) as a crosslinker. A proposed mechanism for κC‐g‐AMPS formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The affecting variables on swelling capacity, i.e., the initiator, the crosslinker, and the monomer concentration, as well as reaction temperature, were systematically optimized. The swelling measurements of the hydrogels were conducted in aqueous solutions of LiCl, NaCl, KCl, MgCl₂, CaCl₂, SrCl₂, BaCl₂, and AlCl₃. Due to the high swelling capacity in salt solutions, the hydrogels may be referred to as antisalt superabsorbents. The swelling of superabsorbing hydrogels was measured in solutions with pH ranging 1 to 13. The κC‐g‐AMPS hydrogel exhibited a pH‐responsiveness character so that a swelling–deswelling pulsatile behavior was recorded at pH 2 and 8. The overall activation energy for the graft copolymerization reaction was found to be 14.6 kJ/mol. The swelling kinetics of the hydrogels was preliminarily investigated as well. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 255–263, 2005     

Influence of some aromatic amino acids on the swelling behavior of acrylamide/maleic acid hydrogel

Summary Influence of some aromatic amino acids (histidine, phenylalanine and tryptophan) on the swelling behavior of acrylamide/maleic acid hydrogel (AAm/MA) prepared by γ-radiation was investigated. Swelling tests of AAm/MA hydrogel were made in buffer solutions and amino acid solutions at various pH at 37°C. The pH values are ionization of α-carboxyl groups (pK'₁), α-amino groups (pK'₂) and, isoelectric points (pI) of amino acids. The swelling of AAm/MA hydrogel increased when pH values of solutions were increased. The value of equilibrium swelling of AAm/MA hydrogel was 1035% at pH 10 buffer, while it was 880% at pH 2 buffer. The values of equilibrium swelling of AAm/MA hydrogel in phenylalanine, tryptophan and histidine solutions varied among 1130–1245% at pH 10, while they were among 790–975% at pH 2. The rate constant of swelling, diffusional exponent, network parameter and, diffusion and intrinsic diffusion coefficient were calculated by swelling kinetics. Diffusion of the penetrants into the hydrogel was found to be non-Fickian character. The diffusion coefficients of the hydrogel varied between 3.33×10⁻⁶– 7.71×10⁻⁶ cm ²s⁻¹, while the intrinsic diffusion coefficients waried between 4.03×10⁻⁶– 8.48×10⁻⁶ cm ²s⁻¹. Received: 22 December 1997/Revised version: 3 March 1998/Accepted: 5 March 1998     

Study on superabsorbent composite. XX. Effects of cation‐exchanged montmorillonite on swelling properties of superabsorbent composite containing sodium humate

In this work, the effects of different cation‐exchanged montmorillonite on water absorbency of poly(acrylic acid‐co‐acrylamide)/montmorillonite/sodium humate (PAA‐AM/MMT/SH) superabsorbent composite were systematically investigated under the same preparation conditions. The superabsorbents doped with different cation‐exchanged montmorillonite were characterized by Fourier‐transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscopy technologies. Swelling behaviors of developing superabsorbent composite in various cationic saline solutions (NaCl, CaCl₂, and FeCl₃) were also investigated. The water absorbencies of superabsorbent composite with 20 wt% MMT and 30 wt% SH are 638, 723, 682, and 363 g g⁻¹ in distilled water for incorporating natural Na⁺‐MMT, Li⁺‐exchanged MMT, Ca²⁺‐exchanged MMT, and Al³⁺‐exchanged MMT, respectively. The results showed that the cation‐exchange process had some obvious influences on final water absorbency of superabsorbent composite. NaCl, CaCl₂, and FeCl₃ solutions did not alter the swelling characteristics of the superabsorbent materials at a concentration of less than 0.01 mM, however, a concentration of greater than 0.1 mM caused a collapse in the swelling curves. The excellent swelling‐reswelling‐swelling behavior and lower swelling rate testified that Al³⁺‐exchanged MMT can act as an assistant crosslinker in the polymeric network. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Synthesis,characterization and swelling behaviors of hydroxyethyl cellulose‐g‐poly(acrylic acid)/attapulgite superabsorbent composite

In this work, a series of novel hydroxyethyl cellulose‐ g‐poly(acrylic acid)/attapulgite (HEC‐g‐PAA/APT) superabsorbent composites were prepared through the graft polymerization of hydroxyethyl cellulose (HEC), partially neutralized acrylic acid (AA), and attapulgite (APT) in aqueous solution, and the composites were characterized by means of Fourier‐transform spectroscopy, scanning electron microscopy, and transmission electronmicroscopy. The effects of polymerization variables including concentrations of the initiator and crosslinker and APT content on water absorbency were studied, and the swelling properties in various pH solutions as well as the swelling kinetics in various saline solutions were also systematically evaluated. Results showed that the introduction of 5 wt% APT into HEC‐g‐PAA polymeric network could improve both water absorbency and water absorption rate of the superabsorbent composites. In addition, the superabsorbent composites retained high water absorbency over a wide pH range of 4–10, and the swelling kinetics of the superabsorbent composites in CaCl₂ and FeCl₃ solutions exhibited a remarkable overshooting phenomenon. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers     

Hydrogels composite of poly(acrylamide‐co‐acrylate) and rice husk ash. I. Synthesis and characterization

Composite hydrogels of poly(acrylamide‐co‐acrylate) with rice husk ash (RHA) were synthesized and studies of the swelling variables were accomplished comparatively with commercial polyacrylamide gel and PAMACRYL, a poly(acrylamide‐co‐acrylate) hydrogel without RHA. FT‐IR and WAXS were the techniques employed for characterizing a series of hydrogel obtained by varying the percentage of RHA (1, 2, 5, 10, and 20 wt %) and the amount of crosslinking agent (0.05, 0.1, and 0.2 mol %) relative to sum of AAm and AAc. Superabsorbent hydrogel with W_eq > 800 g H₂O/g gel was obtained with percentage of 10 wt % of RHA and 0.1 of crosslinking agent mol %. The hydrogel showed to be sensitive to the pH variation and to the presence of salts. The hydrogels, even though submitted through cycles of drying and swelling, preserved their superabsorbent characteristics and demonstrated better water absorbance properties when compared with commercial polyacrylamide gel. The composite hydrogels of poly(acrylamide‐co‐acrylate) with RHA presented good characteristics to be applied as soil conditioner for using in agriculture. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Screening and optimization through response surface methodology for synthesis of pH,temperature and salt‐sensitive Aloe vera–acrylic acid‐based biodegradable hydrogel: Its evaluation as dye adsorbent

A pH‐, temperature‐, and salt‐sensitive hydrogel was synthesized using acrylic acid (AA) as monomer, natural polysaccharide Aloe vera as backbone, ammonium persulfate–N,N‐methylene‐bis‐acrylamide as an initiator–crosslinker system via free‐radical grafting method. Different parameters such as treatment time, temperature, amount of solvent, pH, concentration of initiator, crosslinker and monomer were screened using Plackett–Burman design (PBD). The PBD showed that pH, monomer, and crosslinker were taken as the most important variables, which highly impact the swelling behavior of the synthesized hydrogel as compared to the rest of the variables. The half normality plot was used to find the significant parameters regarding the swelling capacity of the hydrogel. The center composite design was used for further optimizing the important variables like pH, monomer, and crosslinker. The pH and monomer interaction on percentage swelling (Ps) was studied through the analysis of variance model. Synthesized hydrogel Av‐cl‐poly(AA) was characterized by different techniques such as Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction, and scanning electron microscopy (SEM). The effect of different chloride salt solutions like KCl, NaCl, BaCl₂, FeCl₃, and CoCl₃·6H₂O on Ps of synthesized Av‐cl‐poly(AA)‐based hydrogel was also studied. Biodegradation studies of the synthesized polymer were also carried out using soil burial and vermicompositing methods. Biodegradation of semi interpenetrating polymer network (SIPN) was confirmed by SEM and FTIR techniques. Synthesized SIPN was also used as a device for the removal of dye and was found very effective as an adsorbent. POLYM. ENG. SCI., 59:2323–2334, 2019. © 2019 Society of Plastics Engineers     

瓜尔胶-g-聚(丙烯酸钠-co-苯乙烯)/海泡石复合高吸水性树脂的制备及溶胀行为

以瓜尔胶(GG)、部分中和丙烯酸(NaA)、苯乙烯(St)和海泡石(ST)为原料, 过硫酸铵(APS)为引发剂, N,N′-亚甲基双丙烯酰胺(MBA)为交联剂, 在水溶液中通过接枝共聚反应合成了瓜尔胶-g-聚(丙烯酸钠-co-相似文献   

Synthesis,characterization, and swelling behavior of superabsorbent hydrogel from sodium salt of partially carboxymethylated tamarind kernel powder‐g‐PAN

Polyacrylonitrile (PAN)‐grafted sodium salt of partially carboxymethylated tamarind kernel powder (Na‐PCMTKP‐g‐PAN, %G = 413.76 and %GE = 96.48) was prepared using the established optimal reaction conditions for ceric‐initiated graft copolymerization of acrylonitrile onto Na‐PCMTKP (DS = 0.15) in a homogeneous medium. The graft copolymer was hydrolyzed by 0.7N KOH solution at 90–95°C to yield the superabsorbent hydrogel H‐Na‐PCMTKP‐g‐PAN. The nitrile groups of Na‐PCMTKP‐g‐PAN were completely converted into a mixture of hydrophilic carboxamide and carboxylate groups during alkaline hydrolysis, followed by in situ crosslinking of the grafted PAN chains. The products were characterized spectroscopically and morphologically. The swelling behavior of the unreported superabsorbent hydrogel, H‐Na‐PCMTKP‐g‐PAN, was studied by carrying out its absorbency measurements in low‐conductivity water, 0.15M salt (NaCl, CaCl₂, and AlCl₃) solutions, and simulated urine (SU) at different timings. The swelling behavior of the hydrogel in different swelling media followed the second‐order kinetics. The values of the various swelling characteristics were reported. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and swelling behaviors of semi‐IPNs superabsorbent resin based on chicken feather protein

A novel chicken feather protein‐g‐poly (potassium acrylate)/polyvinyl alcohol (CFP‐g‐PKA/PVA) semi‐IPNs superabsorbent resin (SAR) based on feather protein, acrylic acid (AA), and polyvinyl alcohol (PVA) was synthesized by graft copolymerization and semi‐interpenetrating technology. The results from FTIR, SEM, and TGA analysis showed that both CFP and PVA reacted with PKA during the polymerization process. The effects of AA, PVA, initiator and crosslinker content on water absorbency of semi‐IPNs SAR were studied. The swelling behavior in various pHs and saline solutions were also investigated. The water absorbency of SAR reached the maximum at pH = 6. The effect of the five cations on swelling had the following order: Al³⁺ > Ca²⁺ > Mg²⁺ > K⁺ > Na⁺. The highest water absorbency in distilled water and 0.9 wt % NaCl solutions were 714.22 and 70.08 g g^?1, respectively. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39748.     

Reuse of a waste adsorbent poly(AAc/AM/SH)‐Cu superabsorbent hydrogel,for the potential phosphate ion removal from waste water: Matrix effects,adsorption kinetics,and thermodynamic studies

The most commonly applied methods for the treatment of used adsorbents is to recover them in acid/alkaline medium or direct enflame them. This work dealt with a new potential and economic method to utilize a waste adsorbent. Poly(AAc/AM/SH) superabsorbent hydrogels have proved to be a good adsorbent for Cu²⁺ ions and after adsorption the hydrogels were recovered in acid medium. In this report, the Cu²⁺ ion adsorbed hydrogel has not undergone any regeneration process and applied directly to phosphate ion adsorption. The Cu²⁺ ions‐loaded poly(AAc/AM/SH) hydrogels, were stable within a wide pH range and suitable for phosphate ion adsorption. The factors affecting the phosphate adsorption, such as pH, ionic strength, contact time, temperature, initial concentration of the phosphate ion, and coexisting ions were systematically investigated. The phosphate adsorption was highly pH dependent; and the maximum adsorption of 87.62 mg/g was achieved at pH 6.1. The adsorption data fitted the Langmuir adsorption isotherm better than the Freundlich isotherm. The concomitant anions show profounder adverse influence on phosphate ion adsorption of poly(AAc/AM/SH)‐Cu hydrogel and the effect follows the order citrate > sulfate > bicarbonate > chloride > nitrate. The thermodynamic parameters including ΔH°, ΔG°, and ΔS° for the adsorption processes of phosphate ions on the gel were also evaluated, and the negative ΔG° and ΔH° confirmed that the adsorption process was spontaneous and exothermic. The adsorption kinetic results suggest that the adsorption process was well described by the pseudo second‐order kinetic model. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of attapulgite contents on release behaviors of a pH sensitive carboxymethyl cellulose‐g‐poly(acrylic acid)/attapulgite/sodium alginate composite hydrogel bead containing diclofenac

A series of pH‐sensitive composite hydrogel beads, carboxymethyl cellulose‐g‐poly(acrylic acid)/attapulgite/sodium alginate (CMC‐g‐PAA/APT/SA), were prepared by combining CMC‐g‐PAA/APT composite and SA, using Ca²⁺ as the ionic crosslinking agent and diclofenac sodium (DS) as the model drug. The effects of APT content and external pH on the swelling properties and release behaviors of DS from the composite hydrogel beads were investigated. The results showed that the composite hydrogel beads exhibited good pH‐sensitivity. Introducing 20% APT into CMC‐g‐PAA hydrogel could change the surface structure of the composite hydrogel beads, decrease the swelling ability, and relieve the burst release effect of DS. The drug cumulative release ratio of DS from the hydrogel beads in simulated gastric fluid was only 3.71% within 3 hour, but in simulated intestinal fluid about 50% for 3 hour, 85% for 12 hour, up to 90% after 24 hour. The obtained results indicated that the CMC‐g‐PAA/APT/SA hydrogel beads could be applied to the drug delivery system as drug carriers in the intestinal tract. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of salep sulfate and its utilization in preparation of heavy metal ion adsorbent

A multicomponent polysaccharide obtained from dried tubers of certain natural terrestrial orchids was chemically modified by sulfonation using chlorosulfonic acid–dimethylformamide (HClSO_3–DMF) complex as a reagent. For a structural characterization of salep sulfate ¹H nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectra, and Thermogravimetric analysis (TGA) curves were recorded. The sulfate content of modified salep was determined using elemental analysis. This modified biopolymer was used to prepare a new environment‐friendly heavy metal ion adsorbent, salep sulfate‐graft‐polyacrylic acid hydrogel (SS‐g‐PAA). Swelling rate and equilibrium water absorbency in various pH and saline solutions were investigated to study the effect of salep sulfate on swelling behavior of the hydrogel. In addition, the effect of sulfate content on heavy metal ion adsorption from aqueous solution was investigated. The results show that SS‐g‐PAA can effectively remove heavy metal ions (Co²⁺, Zn²⁺, Cu²⁺) from aqueous solution and swelling behavior of the hydrogels highly dependent on the amount of sulfate group on corresponding modified polysaccharide. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3001–3008, 2013     

Synthesis,characterization, and swelling behavior evaluation of hydrogels based on Gum ghatti and acrylamide for selective absorption of saline from different petroleum fraction–saline emulsions

In this research article, the synthesis of Gum ghatti and acrylamide based superabsorbents under pressure with N,N′‐methylene bisacrylamide as a crosslinker and an ascorbic acid–potassium persulfate redox pair as an initiator is reported. To study the impact of the different reaction variables on the water absorbance of the candidate polymer, different reaction parameters, including the reaction time, amount of solvent, pH of the medium, initiator ratio, pressure, and monomer and crosslinker concentrations, were optimized. The candidate polymer was characterized with different techniques, including Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, differential thermal analysis, differential thermogravimetry, and X‐ray diffraction. The crosslinked product was found to be thermally more stable than the initial backbone. The swelling capacity of the synthesized polymer was investigated in deionized water as a function of time, temperature, and pH of the swelling medium. Moreover, the effects of the ionic strengths of different cations on the swelling capacity of the candidate polymer were studied with different salt solutions. The tendency of absorbency for these hydrogels in salt solutions was found to be in the following order: Na⁺ > Ba²⁺ > Fe³⁺ > Sn⁴⁺ for NaCl, BaCl₂, FeCl₃, and SnCl₄ salt solutions. Further, the candidate polymer was used for the selective absorption of saline water from different petroleum fraction–saline emulsions. The results showed that the saline absorption capacities of the hydrogels were 667, 610, 646, and 680% in kerosene–saline, diesel–saline, petrol–saline, and petroleum ether–saline emulsions, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Superabsorbent polymeric materials. I. Swelling behaviors of crosslinked poly(sodium acrylate-co-hydroxyethyl methacrylate) in aqueous salt solution

A series of crosslinked poly(sodium acrylate-co-hydroxyethyl methacrylate) based on sodium acrylate (SA), 2-hydroxyethyl methacrylate (HEMA), and N,N′-methylene-bis-acrylamide (NMBA) are prepared by inverse suspension polymerization. The resultant crosslinking polymers are xerogellants. This work investigates not only the absorbency or swelling behavior for these xerogellants composed of different ratios of HEMA/SA in water, but also the effects of various salts and pH values on the swelling properties. Experimental results indicate that the absorbency in deionized water decreases with an increase in the HEMA in copolymeric gel, which is related to the degree of expansion of the network and the strength of the hydrophilic group. The absorbency in the chloride salt solutions decreases with an increase in the salt concentration (swelling is 50 times for the IA group chloride salt solutions, but is less than 5 times for the IIA group salt solution), owing to the osmosis of water and ions between the polymeric gel and the external solution. A decrease in the extent of swelling occurs for divalent and trivalent chloride salt solutions. For the salt solutions of the same ionic strength, the swelling amount has the following tendency: LiCl(aq) = NaCl(aq) = KCl(aq), CaCl₂(aq) < SrCl₂(aq) < BaCl₂(aq), and Fe³⁺ > Ca²⁺ > Zn²⁺ > Cu²⁺. These orders are related to the complexing ability between metallic cations and the carboxylate group in the polymeric chains. Finally, the adsorption of ferric ion by these gels is also investigated. © 1996 John Wiley & Sons, Inc.     

Swelling behavior of poly(sodium acrylate)/kaoline superabsorbent composite

Using partly neutralized acrylic acid as monomer, kaoline ultrafine powder as filler and N,N′‐(dimethyl)acrylamide as crosslink agent, poly(sodium acrylate)/kaoline superabsorbent composite was synthesized by aqueous solution polymerization method. Using the superabsorbent composite as collagen, a hydrogel was prepared. The influence of the neutralization degree of superabsorbent collagen, the compositions, the concentration, and the pH value of exterior solution on the swelling behavior of the hydrogel was investigated. It was found that the swelling capability of the hydrogel depended on the groups on the collagen. The swelling capability of the hydrogel relied on the ionic intensity, molecular polarity, molecular volume, as well as the concentration of exterior solution. When the pH value of exterior solution was equal to seven, the hydrogel has a maximum swelling value of 800 times. POLYM. ENG. SCI. 46:324–328, 2006. © 2006 Society of Plastics Engineers