Studies on effect of improved d‐spacing of montomorillonite on properties of poly(vinyl chloride) nanocomposites

Surface modification of montomorillonite for improvement in d‐spacing was done by column chromatography with quaternary long chain ammonium salt having cation exchange capacity of 110 meq/100 g. Organically modified montomorillonite (OMMT)/poly(vinyl chloride) (PVC) nanocomposites were prepared through direct melt compounding on a conventional twin screw extruder. Because of improved d‐spacing of OMMT, the polymer chains get exfoliated in between the plates of clay and dispersed uniformly. The mechanical properties of the nanocomposites were found to be appreciable at 12 wt % loading of OMMT. Moreover, rheological data, such as torque, fusion time, viscosity, and shear rate were also recorded on Brabender Plasticorder. The improvement in mechanical properties with increase in amount of OMMT loading is evidenced from reduction in shear viscosity and torque. Also nanoclay is acting as a lubricating agent with packing effect, which reduces the torque with decrease in viscosity along with increment in elongation at break. Because of soft nature of OMMT and improvement in d‐spacing the processing of PVC becomes easier, and hence, OMMT is playing a dual role as a (i) good processing aid and (ii) filler. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation,morphology, and properties of organo‐montmorillonite/nitrile butadiene rubber nanocomposites

Organo‐montmorillonite/nitrile butadiene rubber (OMMT/NBR) nanocomposites were prepared by co‐coagulating process, and then were combined with rubber ingredient and vulcanized by traditional rubber mixing procedure. The SEM micrographs of the nanocomposites showed uniform dispersion of the OMMT particles in NBR. The ATR‐FTIR spectra illustrated the existence of montmorillonite in the nanocomposites. The XRD patterns further indicated the structure of nanocomposites, and confirmed an effective intercalation of NBR in the interlayer space of the OMMT. Moreover, the tensile strength and elongation at break of nanocomposites tended to increased rapidly with increasing OMMT loading, due to the reinforcing properties of OMMT to NBR. In addition, the TGA and DTA curves demonstrated the thermal performance of the nanocomposites enhanced. Furthermore, the addition of OMMT accelerated the vulcanization process. POLYM. COMPOS., 34:1809–1815, 2013. © 2013 Society of Plastics Engineers     

Preparation and structure and mechanical properties of poly(styrene‐b‐butadiene)/clay nanocomposites

Star‐shaped and linear block thermoplastic poly(styrene‐b‐butadiene) copolymer (SBS)/organophilic montmorillonite clays (OMMT) were prepared by a solution approach. The intercalation spacing in the nanocomposites and the degree of dispersion of nanocomposites were investigated by X‐ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. The mechanical properties, dynamic mechanical properties, and thermal stability of these nanocomposites were determined. Results showed that SBS chains were well intercalated into the clay galleries and an intercalated nanocomposite was obtained. The mechanical strength of nanocomposites with the star‐shaped SBS/OMMT were significantly increased. The addition of OMMT also gave an increase of the elongation, the dynamic storage modulus, the dynamic loss modulus, and the thermal stability of nanocomposites. The increase of the elongation of nanocomposites indicates that SBS has retained good elasticity. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3430–3434, 2004     

Reinforcing effect and isothermal crystallization kinetics of poly(3‐hydroxybutyrate) nanocomposites blended with organically modified montmorillonite

Organically modified montmorillonite (OMMT) has been incorporated up to 7 wt% in poly(3‐hydroxybutyrate) (PHB) by melt compounding in a twin screw extruder. PHB nanocomposites reinforced with C93A showed significant increase in tensile and flexural modulus and impact strength comparatively. Wide angle X‐ray diffraction showed an increase in overall d‐spacing indicating intercalated structure. The intercalation morphology was further supported by transmission electron microscope images indicating formation of intercalated structure in case of PHB/OMMT and a mixture of Intercalated/exfoliated structure in case of PHB/TMI‐MMT nanocomposites. Thermogravimetric analyses indicate that the thermal stability of PHB/TMI‐MMT nanocomposites is higher among all other nanocomposites under investigation and virgin PHB. Differential scanning calorimetry (DSC) analysis of PHB nanocomposites shows marginal increase in glass transition temperature and decrease in crystallization temperature compared to virgin PHB. The isothermal crystallization kinetics of PHB/C93A nanocomposites was investigated by DSC in the temperature range of 100–120°C and the development of relative crystallinity with the crystallization time was analyzed by Avrami equation. POLYM. COMPOS., 35:999–1012, 2014. © 2013 Society of Plastics Engineers     

Mechanical,thermal, and morphological properties of injection molded poly(lactic acid)/SEBS‐g‐MAH/organo‐montmorillonite nanocomposites

Poly(lactic acid)/organo‐montmorillonite (PLA/OMMT) nanocomposites toughened with maleated styrene‐ethylene/butylene‐styrene (SEBS‐g‐MAH) were prepared by melt‐compounding using co‐rotating twin‐screw extruder followed by injection molding. The dispersibility and intercalation/exfoliation of OMMT in PLA was characterized using X‐ray diffraction and transmission electron microscopy (TEM). The mechanical properties of the PLA nanocomposites was investigated by tensile and Izod impact tests. Thermogravimetric analyzer and differential scanning calorimeter were used to study the thermal behaviors of the nanocomposite. The homogenous dispersion of the OMMT silicate layers and SEBS‐g‐MAH encapsulated OMMT layered silicate can be observed from TEM. Impact strength and elongation at break of the PLA nanocomposites was enhanced significantly by the addition of SEBS‐g‐MAH. Thermal stability of the PLA/OMMT nanocomposites was improved in the presence of SEBS‐g‐MAH. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of an organomontmorillonite master batch and its application to high‐temperature‐vulcanized silicone‐rubber systems

N,N‐Di(2‐hydroxyethyl)‐N‐dodecyl‐N‐methyl ammonium chloride was used as an intercalation agent to treat Na⁺‐montmorillonite and form a novel type of organic montmorillonite (OMMT). An OMMT master batch (OMMT‐MB) was prepared by solution intercalation and was used in the preparation of high‐temperature‐vulcanized silicone rubber (HTV‐SR)/OMMT‐MB nanocomposites. The properties, such as the tensile and thermal stability, were researched and compared with those of composites directly incorporated with OMMT or aerosilica. A combination of Fourier transform infrared spectroscopy, wide‐angle X‐ray diffraction, and transmission electron microscopy studies showed that HTV‐SR/OMMT‐MB composites were on the nanometer scale, and their structure was somewhat hindered by the presence of OMMT. The results showed that the tensile properties of HTV‐SR/OMMT‐MB and HTV‐SR/OMMT systems were better than those of pure HTV‐SR. Compared with those of HTV‐SR/OMMT‐20%, the tensile strength and elongation at break of HTV‐SR/OMMT‐MB‐20% were improved about 1.5 and 0.9 times, respectively. This was probably due to the nanoeffect of the exfoliated silicate layers. Moreover, the tensile strength of HTV‐SR/OMMT‐MB‐20% was nearly equal to that of HTV‐SR/aerosilica‐20%, and the elongation at break even showed much improvement. Additionally, the thermal degradation center temperature of the HTV‐SR/OMMT‐MB‐20% nanocomposite was increased by 30°C compared with that of the HTV‐SR/OMMT‐20% composite. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Compatibilization of poly(lactic acid)/ethylene‐propylene‐diene rubber blends by using organic montmorillonite as a compatibilizer

This work focuses on phase morphology and properties of immiscible poly(lactic acid)/ethylene‐propylene‐diene rubber (PLA/EPDM) blends compatibilized with organic montmorillonite (OMMT). Effect of OMMT loading on phase morphology, mechanical properties, and blown film bubble stability was investigated. Transmission electron micrographs show that a large number of OMMT nanolayers locate at interfacial region between PLA and EPDM phase, as well as in EPDM phase due to higher affinity of OMMT with EPDM. Scanning electron micrographs show that EPDM domain size decreases largely with increasing OMMT loading, which is associated with reduction of interfacial energy and inhibition of coalescence by the OMMT locating at the interface, acting as an emulsifier to enwrap the discrete domains. As OMMT loading increases from 0 to 1 phr, elongation at break increases from 20.4 to 151.7% and notched impact strength is enhanced from 8.2 to 31.7 kJ?m^?2. The reduced EPDM domain is the main reason for enhanced toughness of PLA/EPDM/OMMT samples according to crazing with shear yielding mechanism. However, with more than 2 phr of OMMT, the toughness decreases largely due to excessive stress concentration and OMMT aggregation. Attempts were made to produce ductile films from the PLA/EPDM/OMMT nanocomposites by using blown film extrusion. Improvement in blown film bubble stability and tensile ductility of PLA/EPDM/OMMT films also shows that OMMT is an efficient compatibilizer, as well as a processing aid for PLA/EPDM blends. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44192.     

The effect of clay modification on the mechanical properties of poly(methyl methacrylate)/organomodified montmorillonite nanocomposites prepared by in situ suspension polymerization

Poly(methylmethacrylate) (PMMA)/montmorillonite (MMT) nanocomposites were prepared by in situ suspension polymerization. MMT was previously organically modified by different modification agents [dioctadecyl dimethyl ammonium chloride (DODAC) and methacrylatoethyltrimethyl ammonium chloride (MTC)] and different modification method (cation‐exchange reaction and grafting reaction), ultimately giving rise to five kinds of organomodified MMT (OMMT). The structure of the OMMT was studied by Wide angle X‐ray diffraction (WAXD) and Fourier transform infrared spectroscopy (FTIR). Meanwhile, the structure of the PMMA/MMT nanocomposites microspheres was also investigated by WAXD. The molecular weight of the polymers extracted from PMMA/MMT nanocomposites was measured by gel permeation chromatograph (GPC). Finally, the mechanical properties of these PMMA/MMT nanocomposites were studied in detail. It was found that large interlayer spacing (d₀₀₁) of OMMT could not entirely ensure an exfoliated structure of resultant PMMA/MMT nanocomposites, while OMMT with relative small d₀₀₁ could still yield exfoliated structure as long as the compatibility between OMMT and polymer matrix was favorable. In addition, the results of mechanical investigation indicated that the compatibility between OMMT and PMMA matrix turned out to be the dominant factor deciding the final mechanical properties of PMMA/MMT nanocomposites. POLYM. COMPOS., 37:1705–1714, 2016. © 2014 Society of Plastics Engineers     

New approach for preparation of dry natural rubber nanocomposites through acid‐free co‐coagulation: Effect of organoclay content

Natural rubber (NR) vulcanizates exhibit good mechanical properties compared to vulcanizates of synthetic rubbers. Incorporation of a conventional filler at higher loadings to NR enhances its modulus, while reduction in tensile strength and elongation. This paper presents a new strategy for development of a NR‐clay nanocomposite with enhanced mechanical properties by incorporation of lower loadings (2–8 phr) of cetyl trimethyl ammonium bromide modified montmorillonite clay (OMMT‐C) under acid‐free environment. The effect of OMMT‐C loading on cure characteristics, rubber‐filler interactions, crosslink density, dynamic mechanical thermal properties, and mechanical properties were evaluated. Incorporation of OMMT‐C accelerated the vulcanization process and enhanced mechanical properties. X‐ray diffraction analysis and scanning electron microscopy images revealed that the formation of intercalated clay structures at lower OMMT‐C loadings, and clay aggregates at higher loadings. A nanocomposite at OMMT‐C loading of 2 phr exhibited the best balanced mechanical properties, and was associated with highest crosslink density and rubber–filler interactions. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46502.     

Thermal and mechanical properties of melt processed intercalated poly(methyl methacrylate)–organoclay nanocomposites over a wide range of filler loading

BACKGROUND: Poly(methyl methacrylate) (PMMA)–organoclay nanocomposites with octadecylammonium ion‐modified montmorillonite, prepared via melt processing, over a wide range of filler loading (2–16 wt%) were investigated in detail. These hybrids were characterized for their dispersion structure, and thermal and mechanical properties, such as tensile modulus (E), break stress (σ_brk), percent break strain (ε_brk) and ductility (J), using wide‐angle X‐ray diffraction, transmission electron microscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and tensile and impact tests. RESULTS: Intercalated nanocomposites were formed even in the presence of 16 wt% clay (high loading) in PMMA matrix. PMMA intercalated into the galleries of the organically modified clay, with a change in d‐spacing in the range 11–16 Å. TGA results showed improved thermal stability of the nanocomposites. The glass transition temperature (T_g) of the nanocomposites, from DSC measurements, was 2–3 °C higher than that of PMMA. The ultimate tensile strength and impact strength decreased with increasing clay fraction. Tensile modulus for the nanocomposites increased by a significant amount (113%) at the highest level of clay fraction (16 wt%) studied. CONCLUSION: We show for the first time the formation of intercalated PMMA nanocomposites with alkylammonium‐modified clays at high clay loadings (>15 wt%). Tensile modulus increases linearly with clay fraction, and the enhancement in modulus is significant. A linear correlation between tensile strength and strain‐at‐break is shown. Thermal properties are not affected appreciably. Organoclay can be dispersed well even at high clay fractions to form nanocomposites with superior bulk properties of practical interest. Copyright © 2007 Society of Chemical Industry     

Poly(methyl methacrylate)/montmorillonite nanocomposites prepared with a novel reactive phosphorus–nitrogen‐containing monomer of N‐(2‐(5,5‐dimethyl‐1,3,2‐dioxaphosphinyl‐2‐ylamino)ethyl)‐ acrylamide and its thermal and flame retardant properties

A novel reactive phosphorus–nitrogen‐containing monomer, N‐(2‐(5,5‐dimethyl‐1,3,2‐dioxaphosphinyl‐2‐ylamino)ethyl)‐acrylamide (DPEAA), was synthesize and characterized. Flame retardant poly(methyl methacrylate)/organic‐modified montmorillonite (PMMA‐DPEAA/OMMT) nanocomposites were prepared by in situ polymerization by incorporating methyl methacrylate, DPEAA, and OMMT. The results from X‐ray diffraction and transmission electron microscopy (TEM) showed that exfoliated PMMA‐DPEAA/OMMT nanocomposites were formed. Thermal stability and flammability properties were investigated by thermogravimetric analysis, cone calorimeter, and limiting oxygen index (LOI) tests. The synergistic effect of DPEAA and montmorillonite improved thermal stability and reduced significantly the flammability [including peak heat release rates (PHRR), total heat release, average mass loss rate, etc.]. The PHRR of PMMA‐DPEAA/OMMT was reduced by about 40% compared with pure PMMA. The LOI value of PMMA‐DPEAA/OMMT reached 27.3%. The morphology and composition of residues generated after cone calorimeter tests were investigated by scanning electronic microscopy (SEM), TEM, and energy dispersive X‐ray (EDX). The SEM and TEM images showed that a compact, dense, and uniform intumescent char was formed for PMMA‐DPEAA/OMMT nanocomposites after combustion. The results of EDX confirmed that the carbon content of the char for PMMA‐DPEAA/OMMT nanocomposites increased obviously by the synergistic effect of DPEAA and montmorillonite. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Study of polypropylene/montmorillonite nanocomposites prepared by solid‐state shear compounding (S3C) using pan‐mill equipment: the morphology of montmorillonite and thermal properties of the nanocomposites

In this paper, polypropylene (PP)/organophilic montmorillonite (OMMT) nanocomposites were successfully prepared without any compatibilizers by solid‐state shear compounding (S³C) using pan‐mill equipment. X‐ray diffraction (XRD) patterns show that the OMMT characteristic (001) peak at 2θ equal to 4.59 degrees disappeared for the milled OMMT and corresponding composites. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) photographs show that the thickness of pan‐milled OMMT decreased from ca 100–200 nm to ca 30–50 nm, and OMMT was partly exfoliated in the PP matrix because the pan‐type mill can exert fairly strong squeezing force in the normal direction and shearing force in both radial and tangential directions on milled materials. PP/OMMT nanocomposites at low OMMT loading have higher melting point, crystallization temperature, thermal degradation temperature and heat distortion temperature than those of neat PP. Moreover, addition of OMMT accelerates crystallization of PP significantly. S³C is a novel approach to prepare polymer/layered silicate nanocomposites with high performances at low filler loading. Copyright © 2004 Society of Chemical Industry     

Structural and ordering behavior of lamellar polystyrene‐block‐polybutadiene‐block‐polystyrene triblock copolymer containing layered silicates

Nanocomposites based on organically modified montmorillonites (OMMTs) and sodium montmorillonite (CLO‐Na⁺) with poly(styrene‐b‐butadiene‐b‐styrene) (SBS) diblock copolymer have been investigated. Solution blending of OMMT suspension in toluene with SBS and subsequent static casting and annealing resulted in transparent films. Final samples were processed by compression molding. The intercalation spacing in the nanocomposites, microphase separation of the SBS, and the degree of dispersion of nanocomposites were investigated by X‐ray diffraction (Wide and small‐angle X‐ray scattering), transmission optical microscopy (TOM), atomic force microscopy (AFM), and transmission electron microscopy (TEM). The increase of basal spacing of OMMT in the nanocomposites suggested the intercalation of SBS. The lamellar structure perfection was extensively affected by both OMMT. AFM images and TOM micrographs only showed well dispersed but not exfoliated nanocomposites. On the other hand, TEM showed inserted tactoids into both blocks depending on the surfactant used (stained samples) and the dispersion of those tactoids (unstained samples). Fourier transform infrared spectroscopy indicated only the presence of the OMMT into the SBS. Deviations of the decomposition pathway of pristine SBS with addition of the OMMT were found by thermogravimetric analysis. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of bio‐based polymeric nanocomposites from acrylated epoxidized soybean oil and montmorillonite clay in the presence of a bio‐based intercalant

Polymeric nanocomposites were synthesized from functionalized soybean‐oil‐based polymer matrix and montmorillonite (MMT) clay using an in situ free radical polymerization reaction. Acrylated epoxidized soybean oil combined with styrene was used as the monomer. Organophilic MMT (OrgMMT) was obtained using a quaternized derivative of methyl oleate, which was synthesized from olive oil triglyceride, as a renewable intercalant. The resultant nanocomposites were characterized using X‐ray diffraction and atomic force microscopy. The effect of increased nanofiller loading on the thermal and mechanical properties of the nanocomposites was investigated using thermogravimetric analysis and dynamic mechanical analysis. It was found that the desired exfoliated nanocomposite structure was achieved when the OrgMMT loading was 1 and 2 wt%, whereas a partially exfoliated or intercalated nanocomposite was obtained for 3 wt% loading. All the nanocomposites were found to have improved thermal and mechanical properties as compared with virgin acrylated epoxidized soybean‐oil‐based polymer matrix. The nanocomposite containing 2 wt% OrgMMT clay was found to have the highest thermal stability and best dynamic mechanical performance. Copyright © 2010 Society of Chemical Industry     

Impact,thermal, and morphological properties of functionalized rubber toughened‐poly(ethylene terephthalate) nanocomposites

In this study, poly(ethylene terephthalate)/organo‐montmorillonite (PET/OMMT) nanocomposites were melt‐compounded using twin screw extruder followed by injection molding. Maleic anhydride grafted styrene‐ethylene/butylene‐styrene (SEBS‐g‐MAH) was used to improve the impact properties of the PET/OMMT nanocomposites. The notched and un‐notched impact strength of PET/OMMT nanocomposites increased at about 2.5 times and 5.5 times by the addition of 5 wt % of SEBS‐g‐MAH. Atomic force microscopy (AFM) scans were taken from the polished surface of both PET/OMMT and SEBS‐g‐MAH toughened PET/OMMT nanocomposites. The addition of SEBS‐g‐MAH altered the phase structure and clay dispersion in PET matrix. It was found that some of the OMMT silicate layers were encapsulated by SEBS‐g‐MAH. Further, the addition of SEBS‐g‐MAH decreased the degree of crystallinity of the PET/OMMT nanocomposites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of hyperbranched organo‐montmorillonite and its application into high‐temperature vulcanizated silicone rubber systems

N,N‐Di(2‐hydroxyethyl)‐N‐dodecyl‐N‐methyl ammonium chloride was used as intercalation agent to treat Na⁺‐montmorillonite and form a type of organic montmorillonite (OMMT). Hyperbranched OMMT (HOMMT) was prepared by condensation reaction between OMMT and the monomer we synthesized. It was then used in the preparation of high‐temperature vulcanizated silicone rubber (HTV‐SR)/HOMMT nanocomposite. Different types of HTV‐SR/HOMMT nanocomposites were prepared with different amounts of HOMMT and compared with the composites directly incorporated with OMMT. Tensile properties such as tensile strength, elongation at break, permanent distortion, and shore A hardness were researched and compared. A combination of Fourier transform infrared spectroscopy, wide angle X‐ray diffraction, and transmission electron microscopy studies showed that HTV‐SR/HOMMT composites were on the nanometer scale, and the structure of HTV‐SR was not interfered by the presence of HOMMT. Results showed that the tensile properties of HTV‐SR/HOMMT systems were better than that of the HTV‐SR/HOMMT and HTV‐SR. This was probably due to the surface effect of the exfoliated silicate layers and anchor effect of HOMMT in the SR matrix. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Crystallization behavior of poly(p‐dioxanone)‐PU/montmorillonite nanocomposites prepared by chain‐extending reaction

Organo‐modified montmorillonites and poly(p‐dioxanone) (PPDO) diol prepolymers were used to prepare Poly(p‐dioxanone)‐PU/organic montmorillonite (PPDO‐PU/OMMT) nanocomposites by chain‐extending reaction. The crystallization behavior and spherulitic morphology of PPDO‐PU/OMMT nanocomposites were investigated by WXRD, differential scanning calorimetry, and polarized optical microscopy. The results show that the regularity of the chain structure plays a dominant role during the crystallization process rather than that of OMMT content and its dispersion status in PPDO matrix. With similar molecular weight and same OMMT content, PPDO‐PU/OMMT nanocomposite, which derived from lower molecular weight PPDO prepolymer, exhibits lower crystallization rate, melting point, and crystallinity. The influence of the clay content on the crystallization behavior highly depends on its dispersing state. The nucleating effect of OMMT can be only observed at high loading percentage. For the nanocomposites with low clay loading percentage, the retarding effect of exfoliated platelets on the chain‐ordering into crystal lamellae became the key factor. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Polypropylene/organically modified Sabah montmorillonite nanocomposites: Surface modification and nanocomposites characterization

The aim of the work is to extract, purify, and organically modify montmorillonite (MMT) of Lahad Datu, Sabah bentonite. The octadecylamine treated Sabah MMT (S‐OMMT) (2–8 wt%) was then melt blended with polypropylene (PP) and maleated polypropylene (PPgMAH) (10 wt%) via single screw nanomixer extruder followed by injection molding into test samples to examine the mechanical, thermal, and morphological properties of PP/S‐OMMT nanocomposites. Unmodified Sabah MMT (S‐MMT) and commercial grade MMT (Nanomer 1.30P) filled PP nanocomposites were also characterized for comparison purpose. X‐ray diffraction results showed that the interlayer spacing of S‐MMT increased after organic modification as Fourier transform infra‐red and elemental analysis evidenced the presence of octadecylamine. PP/S‐OMMT nanocomposites showed a better dispersion and strength compared to PP/Nanomer 1.30P nanocomposites due to its smaller MMT platelet size. differential scanning calorimetry and Thermogravimetry analysis revealed that the thermal stability and crystallinity of neat PP improved with the addition of all types of MMT. Dynamic mechanical analyzer showed that PP nanocomposites have higher storage modulus (E′) values than the neat PP over the whole temperature range. The new PP/S‐OMMT nanocomposites showed a comparable performance with PP/Nanomer 1.30P nanocomposites exhibiting promising future applications of S‐MMT in polymer/MMT nanocomposites. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Preparation and properties of montmorillonite‐based polyimide nanocomposites

Montmorillonite (MMT)‐based polyimide (PI) nanocomposites were prepared via two‐stage polymerization of PI using polyamic acid (PAA). The clay was organically modified using various alkylammonium ions to examine the effect of changes in alkyl length on the intercalation spacing of both the treated clays and their hybrids with PAA and PI. The intercalation behavior of clay in the PI matrix and its thermal and mechanical properties were investigated as a function of clay concentration. The d‐spacing of organically modified MMT (O‐MMT) increased with increasing length of the alkylammonium chain. PI/O‐MMT hybrids form exfoliated nanocomposites at clay concentrations below 2 wt%, while they form intercalated nanocomposites together with some exfoliated ones at clay contents exceeding 4 wt%. Young's modulus increased rapidly to a clay loading of 2 wt%, and leveled off with further increases in clay loading. The tensile strength at break increased rapidly up to a clay loading of 1 wt%, and then decreased sharply, while the strain at break showed a monotonic decrease with increasing clay loading from 0 to 8 wt%. The storage modulus, E′, in the temperature range below the glass transition temperature T_g, generally increased with increasing clay content, except at the highest clay content of 8 wt%. Copyright © 2004 Society of Chemical Industry     

Effects of thermoplastic polyurethane on the properties of poly(lactic acid)/organo‐montmorillonite nanocomposites based on novel vane extruder

Polylactic acid (PLA)/organo‐montmorillonite (OMMT) nanocomposites toughened with thermoplastic polyurethane (TPU) were prepared by melt‐compounding on a novel vane extruder (VE), which generates global dynamic elongational flow. In this work, the mechanical properties of the PLA/TPU/OMMT nanocomposites were evaluated by tensile, flexural, and tensile tests. The wide‐angle X‐ray diffraction and transmission electron microscopy results show that PLA/TPU/OMMT nanocomposites had clear intercalation and/or exfoliation structures. Moreover, the particles morphology of nanocomposites with the addition of TPU was investigated using high‐resolution scanning electronic microscopy. The results indicate that the spherical TPU particles dispersed in the PLA matrix, and the uniformity decreased with increasing TPU content (≤30%). Interestingly, there existed abundant filaments among amount of TPU droplets in composites with 30 and 40 wt% TPU. Furthermore, the thermal properties of the nanocomposites were examined with differential scanning calorimeter and dynamic mechanical analysis. The elongation at break and impact strength of the PLA/OMMT nanocomposites were increased significantly after addition of TPU. Specially, Elongation at break increased by 30 times, and notched impact strength improved 15 times when TPU loading was 40 wt%, compared with the neat PLA. Overall, the modified PLA nanocomposites can have greater application as a biodegradable material with enhanced mechanical properties. POLYM. ENG. SCI., 54:2292–2300, 2014. © 2013 Society of Plastics Engineers