Dispersion copolymerization of acrylonitrile‐vinyl acetate in supercritical carbon dioxide

Dispersion copolymerization of acrylonitrile‐vinyl acetate (AN‐VAc) had been successfully performed in supercritical carbon dioxide (ScCO₂) with 2,2‐azobisisobutyronitrile (AIBN) as a initiator and a series of lipophilic/CO₂‐philic diblock copolymers, such as poly(styrene‐r‐acrylonitrile)‐b‐poly(1,1,2,2‐tetrahydroperfluorooctyl methacrylate) (PSAN‐b‐PFOMA), as steric stabilizers. In dispersion copolymerization, poly(acrylonitrile‐r‐vinyl acetate) (PAVAc) was emulsified in ScCO₂ effectively using PSAN‐b‐PFOMA as a stabilizer. Compared with the precipitation polymerization (absence of stabilizer), the products prepared by dispersion polymerization possessed of higher yield and higher molecular weight. In addition, the particle morphology of precipitation polymerization was irregular, but the particle morphology of dispersion polymerization was uniform spherical particles. In this study, the effects of the initial concentrations of monomer and the stabilizer and the initiator, and the reaction pressure on the yield and the molecular weight and the resulting size and particle morphology of the colloidal particles were investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5640–5648, 2006     

Mechanistic study of Sn(Oct)2‐catalyzed ε‐caprolactone polymerization using Sn(Oct)2/BF3 dual catalyst

A novel method was used to investigate the mechanism of Sn(Oct)₂‐catalyzed ε‐caprolactone polymerization by using Sn(Oct)₂/BF₃ dual catalyst. The bulk polymerization was conducted at 110 and 130°C with different Sn(Oct)₂/BF₃ ratios. The polymerization kinetics was followed using gel permeation chromatography, and the molecular structures of the low‐molecular weight polymers were examined using ¹H‐nuclear magnetic resonance (NMR). A polymerization induction period was observed in polymerizations containing the Sn(Oct)₂ catalyst, but it was not observed in the system containing only BF₃. After the induction period, BF₃ and Sn(Oct)₂ initiated the polymerization separately. For Sn(Oct)₂ catalyst with no purposely added alcohol, the actual initiation species is a tin hydroxide species formed in situ by the reaction of Sn(Oct)₂ and adventitious water. For BF₃ catalyst, the active species is the protonic acid formed by the reaction of BF₃ with the adventitious water. When mixed, the Sn(Oct)₂ reacts with the adventitious water faster than the BF₃, preventing the BF₃ catalyzing any polymerizations during the induction period. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Microwave‐irradiated ring‐opening polymerization of D,L‐lactide under atmosphere

Poly(D ,L ‐lactide) (PDLLA) was synthesized by microwave‐irradiated ring‐opening polymerization catalyzed by stannous octoate (Sn(Oct)₂) under atmosphere. The effects of heating medium, monomer purity, catalyst concentration, microwave irradiation time, and vacuum level were discussed. Under the appropriate conditions such as carborundum (SiC) as heating‐medium, 0.15% catalyst, lactide with purity above 99.9%, 450 W microwave power, 30 min irradiation time, and atmosphere, PDLLA with a viscosity–average molecular weight (M_η) over 2.0 × 10⁵ and a yield over 85% was obtained. The dismission of vacuum to ring‐opening polymerization of D ,L ‐lactide (DLLA) under microwave irradiation simplified the process greatly. The temperature under microwave irradiation and conventional heating was compared. The largely enhanced ring‐opening polymerization rate of DLLA under microwave irradiation was the coeffect of thermal effects and microwave effects. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2244–2247, 2006     

Preparation and characterization of the molecular weight controllable poly(lactide-<Emphasis Type="Italic">co</Emphasis>-glycolide)

A series of poly(d,l-lactide-co-glycolide) (PLGA) polymers with various molecular weight were synthesized by a ring-opening polymerization method using stannous 2-ethyl hexanoate (Sn(Oct)₂) as the catalyst. The molecular weight of these polymers was controlled in a novel way, using t-butyldimethylsilanol (TBDS) or triphenylsilanol (TPS). The silicon-end group attached to the PLGA copolymer was removed at room temperature using either hydrochloric acid (HCl) or trifluoroacetic acid (TFA). The structures of these polymers before and after end group removal were characterized by ¹HNMR spectroscopy, while the molecular weight and polydispersity index (PDI) were determined by viscosity method and gel permeation chromatography (GPC). The residual amounts of stannum in PLGA and the glass transition temperature (T _g) of copolymer before and after end group removal were determined by the atomic absorption spectrum (AAS) and differential scanning calorimetry (DSC), respectively. The results showed that the removal method was effective. This study demonstrated that the molecular weight of PLGA could be easily controlled by altering the monomers/silanol molar ratio and the molecular weight and the purity of PLGA copolymer materials after silicon-end group removal could meet the demand of drug release.     

Surface‐initiated ring‐opening polymerization of ϵ‐caprolactone from the surface of PP film

This article presents the ring‐opening polymerization of ε‐caprolactone (ε‐CL) from PP film modified with an initiator layer composed of ? OSn(Oct) groups. This method consists of two steps: (1) Sn(Oct)₂ exchanged with the hydroxyl groups on the surface of PP film, forming the ? OSn(Oct) groups bonded on the surface; (2) surface‐initiated ring‐opening polymerization of ε‐CL with the ? OSn(Oct) groups. The initiator layer is characterized by attenuated total reflectance‐Fourier transform infrared (ATR‐FTIR), contact angles, and X‐ray photoelectron spectroscopy (XPS). The growth of PCL chains from the initiator layer through ring‐opening polymerization is successfully achieved. ATR‐FTIR, XPS, and scanning electron microscope (SEM) are also used to characterize the grafted film. XPS results reveal that the PCL chains cover the surface of PP film after 4 h. The SEM images reveal that the PCL chain clusters grow into regular spheroidal particles, which can be changed into other different morphology by treated with different solvents. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effects of the cosurfactant 1‐butanol and feed composition on nanoparticle properties produced by microemulsion copolymerization of styrene and methyl methacrylate

The concentration of the cosurfactant 1‐butanol (BuOH) determined the polymer weight and size for a series of poly(styrene‐co‐methyl methacrylate)s (P(St‐co‐MMA)) synthesized by the free‐radical (o/w) microemulsion technique. A factorial design established the levels of the experimental conditions for the polymerization i.e., concentration of the surfactant, sodium dodecyl sulfate (SDS); concentration of the cosurfactant, BuOH; temperature and ratio of the styrene (St) to methyl methacrylate (MMA). An increase in the weight‐average molecular weight (M_w) and number‐average molecular weight (M_n) was observed in the P(St‐co‐MMA) series with an increase in BuOH concentration from 1 to 5 wt %. These effects could arise from the micellar aggregation induced by interfacial BuOH. The unique micellar conditions could be exploited to synthesize copolymers of varying molecular weight and size. Additionally, the composition of the copolymers was virtually templates of the feed composition. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Surface modification of starch nanocrystals through ring‐opening polymerization of ε‐caprolactone and investigation of their microstructures

Bionanoparticles of starch obtained by submitting native potato starch granules to acid hydrolysis conditions. The resulted starch nanoparticles were used as core or macro initiator for polymerization of ε‐caprolactone (CL). Starch nanoparticle‐g‐polycaprolactone was synthesized through ring‐opening polymerization (ROP) of CL in the presence of Sn(Oct)₂ as initiator. The detailed microstructure of the resulted copolymer was characterized with NMR spectroscopy. Thermal characteristic of the copolymer was investigated using DSC and TGA. By introducing PCL, the range of melting temperature for starch was increased and degradation of copolymer occurred in a broader region. X‐ray diffraction and TEM micrographs confirmed that there was no alteration of starch crystalline structure and morphology of nanoparticles, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Controlled ring‐opening polymerization of ε‐caprolactone initiated by in situ formed yttrium trisalicylaldimine complexes,and their study by density functional theory

A series of yttrium trisalicylaldimine complexes formed in situ by the reaction of trialkyl complex [Y(CH₂SiMe₃)₃(THF)₂] (THF is tetrahydrofuran) with three equivalent salicylaldimines were used as initiators for the ring‐opening polymerization of ε‐caprolactone. Electronic and steric effects of the salicylaldimine ligand played important roles on the catalytic properties of the yttrium complexes. The yttrium trisalicylaldimine complex Y( L7 )₃ ( L7 = (S)‐2,4‐di‐tert‐butyl‐6‐[(1‐phenylethylimino)methyl]phenol) most effectively initiated controlled ring‐opening polymerization of ε‐caprolactone to prepare poly(ε‐caprolactone)s with high molecular weights and moderate molecular weight distributions. Obtained by density functional theory calculations, the optimized geometries of the four different active centers with four salicylaldimine ligands explained the experimental results. Copyright © 2011 Society of Chemical Industry     

Esterification on solid support by surface‐initiated ring‐opening polymerization of ε‐caprolactone from benzylic hydroxyl‐functionalized Wang resin bead

Biodegradable poly(ε‐caprolactone) (PCL) was formed on benzylic hydroxyl‐functionalized Wang resin surface by surface‐initiated ring‐opening polymerization (SI‐ROP). The SI‐ROP of ε‐caprolactone was achieved first by treating Wang resin with Tin(II) 2‐ethylhexanoate [Sn(Oct)₂] to form Tin(II) complex, and then followed by polymerization of ε‐caprolactone in anhydrous toluene at 60°C. Thus, the polymer‐grafted Wang resin was characterized by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), optical microscopy (OM), and field‐emission scanning electron microscopy (FE‐SEM). The FTIR spectroscopic analysis of polymer‐grafted Wang resin (Wang‐g‐PCL) reveals the formation of ester linkage between PCL and hydroxyl‐terminated Wang resin. The DSC thermogram shows melting peak corresponding to PCL polymer on Wang resin surface. Thermogravimetric investigation shows increase in PCL content on the Wang resin surface in terms of percentage of weight loss with increase in reaction time. The formation of polymeric layers on the Wang resin surface can be directly visualized from OM and SEM images. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A rapid synthesis of poly (p-dioxanone) by ring-opening polymerization under microwave irradiation

Summary A rapid synthesis of poly(p-dioxanone) (PPDO) was carried out smoothly and effectively from the monomer p-dioxanone (PDO) with constant microwave powers of 90, 180, 270, and 360 W, respectively, in a microwave oven at a frequency of 2.45 GHz. The temperature of the polymerization ranged from 158 to 198 °C. PPDO with a viscosity-average molecular weight (Mv) of 156,000g/mol and yield of 63% was obtained at 270W for 25 min using 1/1000 (mol/mol) Sn(Oct)₂ as a catalyst, while it took more than 14h to obtain PPDO with high molecular weight and monomer conversion by conventional heating method when Sn(Oct)₂ used as a catalyst. Therefore, it is obvious that the polymerization rate is faster than that of the conventional polymerization method when microwave irradiation is used in polymerization process.     

Synthesis and characterization of AB‐type copolymers poly(L‐lactide)‐block‐poly(methyl methacrylate) via a convenient route combining ROP and ATRP from a dual initiator

Diblock copolymers of poly(L ‐lactide)‐block‐poly(methyl methacrylate) (PLLA‐b‐PMMA) were synthesized through a sequential two‐step strategy, which combines ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP), using a bifunctional initiator, 2,2,2‐trichloroethanol. The trichloro‐terminated poly(L ‐lactide) (PLLA‐Cl) with high molecular weight (M_n,GPC = 1–12 × 10⁴ g/mol) was presynthesized through bulk ROP of L ‐lactide (L ‐LA), initiated by the hydroxyl group of the double‐headed initiator, with tin(II) octoate (Sn(Oct)₂) as catalyst. The second segment of the block copolymer was synthesized by the ATRP of methyl methacrylate (MMA), with PLLA‐Cl as macroinitiator and CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalyst, and dimethyl sulfoxide (DMSO) was chosen as reaction medium due to the poor solubility of the macroinitiator in conventional solvents at the reaction temperature. The trichloroethoxyl terminal group of the macroinitiator was confirmed by Fourier transform infrared spectroscopy (FTIR) and ¹H‐NMR spectroscopy. The comprehensive results from GPC, FTIR, ¹H‐NMR analysis indicate that diblock copolymers PLLA‐b‐PMMA (M_n,GPC = 5–13 × 10⁴ g/mol) with desired molecular composition were obtained by changing the molar ratio of monomer/initiator. DSC, XRD, and TG analyses establish that the crystallization of copolymers is inhibited with the introduction of PMMA segment, which will be beneficial to ameliorating the brittleness, and furthermore, to improving the thermal performance. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Ring‐opening polymerization of trimethylenecarbonate and its copolymerization with ϵ‐caprolactone by lanthanide (II) aryloxide complexes

Lanthanide metal (II) 2,6‐di‐tert‐butylphenoxide complexes (ArO)₂Ln(THF)₃ (Ln = Sm 1 , Yb 2 ) alone have been developed to catalyze the ring‐opening polymerization of trimethylenecarbonate (TMC) and random copolymerization of TMC and ε‐caprolactone (ε‐CL) for the first time. The influence of reaction conditions, such as initiator, initiator concentration, polymerization temperature, and polymerization time, on monomer conversion, molecular weight, and molecular weight distribution of the resulting PTMC was investigated. It was found that the divalent complex 1 showed higher activity for the polymerization of TMC than complex 2 . The random structure and thermal behavior of the copolymers P(TMC‐co‐CL) have been characterized by ¹H NMR, ¹³C NMR, GPC, and DSC analysis. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Ring‐opening polymerization of ε‐caprolactone by a new yttrium complex: Y[2,2′‐ethylidene‐bis(4,6‐di‐tert‐butylphenoxy)]2(ethylene glycol dimethyl ether)Na(ethylene glycol dimethyl ether)3

The main aims of the work reported here were to synthesize and characterize a new 2,2′‐ethylidene‐bis(4,6‐di‐tert‐butylphenol) (EDBPH₂)‐based bimetal yttrium complex, Y(EDBP)₂(DME)Na(DME)₃ (1c; where DME is ethylene glycol dimethyl ether), which was employed as an efficient initiator for the ring‐opening polymerization of ε‐caprolactone (ε‐CL). From single‐crystal X‐ray diffraction, the solid structure of this new bimetal initiator was well established. Experimental results show that 1c initiates the ring‐opening polymerization of ε‐CL to afford poly(ε‐CL) with a narrow molecular weight distribution (M_w/M_n = 1.09–1.36, 65 °C). Based on an in situ NMR study, a plausible coordination–insertion mechanism is then proposed. The bimetal complex 1c can be used as an initiator for the ring‐opening polymerization of ε‐CL with some living characteristics. A study of the mechanism reveals that DME displacement in 1c by ε‐CL is involved in the initiation process and the propagation may proceed through three pathways by Na? O insertion or Y? O insertion. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of poly(p‐phenylene)‐graft‐poly(ε‐caprolactone) copolymers by combined ring‐opening polymerization and cross‐coupling processes

2,5‐Dibromo‐1,4‐(dihydroxymethyl)benzene was used as initiator in ring‐opening polymerization of ε‐caprolactone in the presence of stannous octoate (Sn(Oct)₂) catalyst. The resulting poly(ε‐caprolactone) (PCL) macromonomer, with a central 2,5‐dibromo‐1,4‐diphenylene group, was used in combination with 1,4‐dibromo‐2,5‐dimethylbenzene for a Suzuki coupling in the presence of Pd(PPh₃)₄ as catalyst or using the system NiCl₂/bpy/PPh₃/Zn for a Yamamoto‐type polymerization. The poly(p‐phenylenes) (PPP) obtained, with PCL side chains, have solubility properties similar to those of the starting macromonomer, ie soluble in common organic solvents at room temperature. The new polymers were characterized by ¹H and ¹³C NMR and UV spectroscopy and also by GPC measurements. The thermal behaviour of the precursor PCL macromonomer and the final poly(p‐phenylene)‐graft‐poly(ε‐caprolactone) copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry analyses and compared. Copyright © 2004 Society of Chemical Industry     

Improved synthesis and properties of hydroxyl‐terminated liquid fluorosilicone

The synthesis of hydroxyl‐terminated poly(trifluoropropylmethyl)siloxane (PTFPMS‐OH) by anionic ring‐opening polymerization of 1,3,5‐tris(trifluoropropylmethyl)cyclotrisiloxane (D₃F) was studied in bulk using potassium hydroxide as an initiator in the presence of several reaction stabilizers. The promoting effect of the reaction stabilizers for the polymerization of D₃F was investigated by GPC and NMR analyses. Results showed that the selected reaction stabilizers exhibited a significant promoting effect. This new process of polymerization produced well‐defined α,ω‐dihydroxylated polysiloxane in very high yields. The addition of reaction stabilizers could almost completely suppress back‐biting reactions during the polymerization. It was found that there lies an exponential decay relationship between the molecular weight of PTFPMS‐OH and amount of end‐capping agent. Thus, by adjusting the reaction conditions strictly, the molecular weight of the fluorosilicone could be controlled accurately, and meanwhile a broad “terminate window” could be implemented. Thermogravimetic (TG) analysis indicated that PTFPMS‐OH could be used in a wide range of operational temperatures. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43220.     

Synthesis and structure control of l‐lactic acid–glycolic acid copolymer by homo‐copolymerization

A two‐step direct melt copolymerization process of l ‐lactic acid (L ‐LA)/glycolic acid (GA) was developed: poly(l ‐lactic acid) (PLLA) and poly(glycolic acid) (PGA) with different molecular weight was first synthesized respectively by binary catalyst (tin chloride/p‐toluenesulfonic or tin chloride); and then poly(l ‐lactic‐co‐glycolic acid) (b‐PLGA) was produced by melt polymerization of the as‐prepared PLLA and PGA, wherein the composition and chain structure of b‐PLGA copolymers could be controlled by the molecular weight of PLLA. The chain structure and thermal properties of copolymers were studied by Wide‐angle X‐ray diffraction, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. In comparison with the random PLGA (r‐PLGA) synthesized by one‐step direct melt polymerization, the average l ‐lactic blocks length (L_LA) in b‐PLGA was longer while the average glycolic blocks length (L_GA) in b‐PLGA was shorter which further resulted in the improved crystallinity and thermostability. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41566.     

Blends of poly(ε‐caprolactone‐b‐lactic acid) and poly(lactic acid) for hot‐melt applications

The condensation reaction product of poly(lactic acid) (PLA) and a hydroxyl‐terminated four‐armed poly(ε‐caprolactone) (PCL) was studied by size‐exclusion chromatography, DSC, and NMR. The use of both L ‐lactic acid (LLA) and rac‐lactic acid (rac‐LA) was studied and the use of two different catalysts, stannous 2‐ethylhexanoate [Sn(Oct)₂] and ferrous acetate [Fe(OAc)₂], was also investigated. The thermal stability and adhesive properties were also measured for the different formulations. The characterization results suggested the formation of a blend of PLA and a block‐copolyester of PLA and PCL. The results further indicated partial miscibility in the amorphous phase of the blend showing only one glass‐transition temperature in most cases, although no randomized structures could be detected in the block‐copolymers. The polymerization in the Fe(OAc)₂‐catalyzed experiments proceeded slower than in the Sn(Oct)₂‐catalyzed experiments. The discoloring of the polymer was minor when Fe(OAc)₂ was used as catalyst, but significant when Sn(Oct)₂ was used. The ferrous catalyst also caused a slower thermal degradation. Differences in the morphology and in the adhesive properties could be related to the stereochemistry of the poly(lactic acid). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 196–204, 2004     

Synthesis and characterization of antimicrobial polylactide via ring‐opening polymerization and click chemistry methods

Novel biodegradable polylactide (PLA) copolymers bearing pendant antimicrobial agent groups were successfully fabricated with a combination of ring‐opening copolymerization and copper(I)‐catalysed azide–alkyne cycloaddition click reaction in a two‐step reaction procedure. First, biodegradable PLA copolymers bearing azido groups were synthesized by the ring‐opening copolymerization of l ‐lactide and 2,2‐ bis(azidomethyl)trimethylene carbonate in the presence of 1‐dodecanol as protic co‐initiator and tin(II) 2‐ethylhexanoate (Sn(Oct)₂) as the catalyst. Then, alkyne functionalized quaternary ammonium salts were attached onto the azido groups of the copolymers via a Huisgen 1,3‐dipolar cycloaddition reaction to give PLA imparting antimicrobial activity. The chemical structure and composition of the copolymers were clearly confirmed using ¹H NMR and Fourier transform infrared spectroscopies and gel permeation chromatography. Thermal phase transition temperatures (T_m and T_g) and the thermal stability of the polymers were investigated by DSC and TGA experiments, respectively. The antimicrobial activity tests were carried out against Gram‐negative (Escherichia coli) and Gram‐positive (Staphylococcus aureus) bacteria by the drop plate method. It was observed that antimicrobial agents are more active in the polymeric form than in the monomeric form. Also, the activity depends on the compositional ratio and the length of the alkyl group on the ammonium salts. © 2018 Society of Chemical Industry     

Hyperbranched polyesters based on hydroxyalkyl‐lactones via thiol‐ene click reaction

The preparation of AB₂ monomers via thiol‐ene click reaction from six‐ and seven‐membered unsaturated lactones is described. The hydroxyl‐functionalized valerolactone was prepared by use of Michael thiol‐ene‐addition reaction starting from 2‐mercaptoethanol and 3‐methylenetetrahydro‐2H‐pyran‐2‐on. The hydroxyl‐functionalized caprolactone was prepared radically from 2‐mercaptoethanol and 7‐allyloxepan‐2‐one. Both AB₂ monomers were polymerized via ring opening in the presence of tin(II)‐2‐ethylhexanoate (Sn(Oct)₂) as a catalyst yielding the hyperbranched polyesters. The new hyperbranched polyesters were analyzed by ¹³C NMR spectra to determine the degree of branching. © 2014 Society of Chemical Industry     

Preparation and characterization of a type of ladder‐like poly(phenyl silsesquioxane) based hybrid star‐shaped copolymer of ε‐caprolactone

Combination of the organic–inorganic hybrid such as silsesquioxane with ε‐caprolactone will lead to materials expected to be environmentally friendly and applicable to biomedical usages. A ladder‐like poly(phenyl silsesquioxane) based hybrid star‐shaped copolymer of ε‐caprolactone was prepared by ring opening polymerization of ε‐caprolactone catalyzed by Sn(Oct)₂ with hydroxyl terminated ladder‐like poly(phenyl silsesquioxane) as initiator. The copolymers were characterized by proton nuclear magnetic resonance (¹H‐NMR), silicon nuclear magnetic resonance (²⁹Si‐NMR), Fourier‐transform infrared spectrometer (FT‐IR), size exclusion chromatography (SEC), thermo gravimetric analysis (TGA), and differential scanning calorimetry (DSC) in detail. Furthermore, the enzymatic degradation property of the copolymers was also investigated. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42335.