Influence of red phosphorus on the flame-retardant properties of ethylene vinyl acetate/layered double hydroxides composites

Mg?CAl?CFe ternary layered double hydroxides (LDHs) were synthesized based on Bayer red mud by a calcination?Crehydration method, and characterized using powder X-ray diffraction and thermogravimetric analysis techniques. The synergistic flame-retardant effects of red phosphorus (RP) in ethylene vinyl acetate (EVA)/LDHs composites were studied with the limiting oxygen index (LOI), the UL 94 test, the cone calorimeter test (CCT), and the smoke density test (SDT). And, the thermal degradation behavior of the composites was examined by thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR) analysis. Results showed that the LOI values of the composites with RP were basically higher than those of the pure EVA sample and composites containing LDHs only. And the addition of a suitable amount of RP in EVA/LDHs/RP composites can apparently favor UL 94 test. In the UL 94 test there was a V-1 rating and dripping phenomena for the composites containing 50?% LDHs. However, the composites containing 47.5?% LDHs and 2.5?% red phosphorus did not drip. The CCT results indicated that the heat release rate (HRR) of the EVA/LDHs/RP composites with a suitable amount of RP decreased in comparison with that of the EVA/LDHs composites. The SDT showed that RP was helpful to smoke suppression. TG-FTIR data showed that the EVA/LDHs/RP composites show a higher thermal stability than the EVA/LDHs composites. A suitable amount of RP in EVA/LDHs/RP composites resulted in an increase in LOI values, a decrease in the HRR, the achievement of the UL 94 V-1 rating with no dripping phenomenon, a good smoke suppression character, and a high thermal stability.     

Combustion characteristics and synergistic effects of red phosphorus masterbatch with expandable graphite in the flame retardant HDPE/EVA composites

In this work, the flammability behaviors and synergistic effects of red phosphorus masterbatch (RPM) with expandable graphite (EG) in flame‐retardant high‐density polyethylene/ethylene vinyl‐acetate copolymer (HDPE/EVA) composites have been investigated by limiting oxygen index (LOI), UL‐94 test, cone calorimeter test (CCT), thermogravimetric analysis (TGA), Fourier‐transform infrared (FTIR) and scanning electron microscopy (SEM). The data obtained from LOI, UL‐94 test and CCT showed that suitable amount of RPM had synergistic effects with EG in the HDPE/EVA/EG/RPM composites. The addition of RPM greatly increased the LOI values by 3.4%, obtained UL‐94 V‐0 rating, decreased the heat release rates and total heat release, and prolongated the ignition time when 6.7 phr RPM substituted for EG in the HDPE/EVA/EG/RPM composites. The data from TGA and FTIR spectra also indicated the synergistic effects of RPM with EG considerably enhanced the thermal degradation temperatures. The morphological observations after UL‐94, CCT, and SEM images presented positive evidences that the synergistic effects took place for RPM with EG, and the flame‐retardant mechanism has been changed in flame‐retardant HDPE/EVA/EG/RPM composites. The formation of stable and compact charred residues promoted by RPM acted as effective heat barriers and thermal insulations, which improved the flame‐retardant performances and prevented the underlying polymer materials from burning. POLYM. ENG. SCI., 55:2884–2892, 2015. © 2015 Society of Plastics Engineers     

Synthesis of a magnesium/aluminum/iron layered double hydroxide and its flammability characteristics in halogen‐free,flame‐retardant ethylene/vinyl acetate copolymer composites

Mg–Al–Fe ternary hydrotalcites were synthesized by a coprecipitation method and characterized with powder X‐ray diffraction, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The flame‐retardant effects of Mg/Al–CO₃ layered double hydroxides (LDHs) and Mg/Al/Fe–CO₃ LDHs in an ethylene/vinyl acetate copolymer (EVA) were studied with the limited oxygen index (LOI), the UL‐94 test, and the cone calorimeter test (CCT), and the thermal degradation behavior of the composites was examined by thermogravimetric analysis. The results showed that the LOI values of the EVA/(Mg/Al/Fe–CO₃ LDH) composites were basically higher than those of the EVA/(Mg/Al–CO₃ LDH) composites at the same additive level. In the UL‐94 test, there was no rating for the EVA/(Mg/Al–CO₃ LDH) composite at the 50% additive level, and a dripping phenomenon occurred. However, the EVA/(Mg/Al/Fe–CO₃ LDH) composites at the same loading level of LDHs containing a suitable amount of Fe³⁺ ion reached the V‐0 rating, the dripping phenomenon disappearing. The CCTs indicated that the heat release rate (HRR) of the EVA composites with Mg/Al/Fe–CO₃ LDHs containing a suitable amount of Fe³⁺ decreased greatly in comparison with that of the composites with Mg/Al–CO₃ LDHs. The introduction of a given amount of Fe³⁺ ion into Mg/Al–CO₃ LDHs resulted in an increase in the LOI, a decrease in the HRR, and the achievement of the UL‐94 V‐0 rating. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synergistic flame retardant effects of Fe-OMMT with LDH in EVA/LDH composites

Abstract

The synergistic effects of Fe organic modified montmorillonite (Fe-OMMT) with layered double hydroxides (LDHs) in ethylene vinyl acetate copolymer/LDH (EVA/LDH) composites have been studied using thermal analysis [thermogravimetric analysis (TGA)], limiting oxygen index (LOI), UL-94 test and cone calorimeter test (CCT). The results showed that the addition of a given amount of Fe-OMMT apparently increased the LOI value and the rating in the UL-94 test. The results from the LOI and UL-94 tests show that Fe-OMMT can act as flame retardant synergistic agents in EVA/LDH composites. The CCT data indicated that the addition of Fe-OMMT in the EVA/LDH system can greatly reduce the heat release rate. The TGA data show that Fe-OMMT, as an excellent flame retardant synergist of LDH, cannot increase the thermal degradation temperature and the charred residues.     

Intumescent Flame Retardation of EVA Using Microencapsulated Ammonium Polyphosphate and Pentaerythritols

With a melamine-formaldehyde (MF) resin coating layer, microencapsulated ammonium polyphosphate (MCAPP) is prepared by in situ polymerization and is characterized by XPS and water leaching test. The microencapsulation of APP with the MF resin leads to a decrease in the particle's water leaching rate. The flame-retardant action of MCAPP and APP in EVA are studied using LOI and UL 94 test, and their thermal stability is evaluated by thermogravimetric analysis (TGA). The LOI value of the EVA/MCAPP composite at the same loading is higher than the value of the EVA/APP composite. In comparison with the EVA/MCAPP composites, it is found that the LOI values of the EVA/MCAPP/PER and EVA/MCAPP/DPER ternary composites at the same additive loading increase, and UL 94 ratings of most ternary composites are raised to V-0. The water-resistant properties of the EVA composites are studied, and the results of the composites containing with APP and MCAPP are compared. Moreover, the peroxide cross-linking of the EVA composites is investigated, and the mechanical properties and thermal stability of the composites increase after the cross-linking.     

Synthesis of novel triazine charring agent and its effect in intumescent flame‐retardant polypropylene

A novel charring agent (CNCA‐DA) containing triazine and benzene ring, using cyanuric chloride, aniline, and ethylenediamine as raw materials, was synthesized and characterized. The effects of CNCA‐DA on flame retardancy, thermal degradation, and flammability properties of polypropylene (PP) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), and cone calorimeter test (CCT). The TGA results showed that CNCA‐DA had a good char forming ability, and a high initial temperature of thermal degradation; the char residue of CNCA‐DA reached 18.5% at 800°C; Ammonium polyphosphate (APP) could improve the char residue of APP/CNCA‐DA system, the char residue reached 31.6% at 800°C. The results from LOI and UL‐94 showed that the intumescent flame retardant (IFR) containing CNCA‐DA and APP was very effective in flame retardancy of PP. When the mass ratio of APP and CNCA‐DA was 2 : 1, and the IFR loading was 30%, the IFR showed the best effect; the LOI value reached 35.6%. It was also found that when the IFR loading was only 20%, the flame retardancy of PP/IFR can still pass V‐0 rating in UL‐94 tests, and its LOI value reached 27.1%. The CCT results demonstrated that IFR could clearly change the decomposition behavior of PP and form a char layer on the surface of the composites, consequently resulting in efficient reduction of the flammability parameters, such as heat release rate (HRR), total heat release (THR), smoke production rate (SPR), total smoke production (TSP), and mass loss (ML). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synergism between hydrotalcite and silicate‐modified expandable graphite on ethylene vinyl acetate copolymer combustion behavior

Influence of independent Mg–Al‐layered double hydroxide (LDH), silicate modified expandable graphite (EG), mixture of LDH and EG at various ratios on ethylene vinyl acetate copolymer (EVA) combustion behavior and thermal stability was detected in sequence through the limiting oxygen index (LOI), vertical combustion (UL‐94) level, microscale combustion calorimeter (MCC) tests and thermal gravimetric/differential thermal gravimetric (TG/DTG) analysis. Results show that the 30 wt % LDH can improve the LOI of 70EVA/30LDH to 27.0%, but the combustion accompanies with serious melt‐dropping. While, the same amount of the EG can increase the LOI, UL‐94 level to 28.5%, V‐0 respectively. However, the combination of LDH and EG can further enhance the 70EVA/20LDH/10EG flame retardancy, it presents the LOI of 29.7%, UL‐94 level of V‐0, and total heat release of 29.5 kJ g^?1. The excellent flame retardancy is attributed to its compact residue. Compared with residue mass, the residue compactness plays a more important role in improving flame retardancy. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44634.     

Synergistic effects of 4A zeolite on the flame‐retardant properties and thermal stability of an efficient halogen‐free flame‐retardant EVA composite

The synergistic effects of 4A zeolite (4A) on the thermal degradation, flame retardancy, and char formation of an efficient halogen‐free flame‐retardant ethylene‐vinyl acetate copolymer composite (EVA/IFR) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter test (CCT), digital photography, scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), laser Raman spectroscopy (LRS) and thermogravimetric analytical (TGA) methods. It was found that a small amount of 4A clearly improved the LOI value of the EVA/IFR composite and reinforced the fire retardant performance with a great reduction in the combustion parameters of the EVA/IFR system from the CCT test. The entire composites passed the UL‐94 V‐0 rating test. The TGA and integral procedure decomposition temperature (IDPT) results showed that 4A enhanced the thermal stability of the EVA/IFR system and increased the char residue content effectively. The morphological structures observed by digital and SEM imaging revealed that 4A could promote EVA/IFR to form a more continuous and compact intumescent char layer. The LRS and EDS results demonstrated that by introduction of 4A into the EVA/IFR system, a more graphite structure was formed with increase phosphorus content in the char residue. POLYM. ENG. SCI., 56:380–387, 2016. © 2016 Society of Plastics Engineers     

Preparation and characterization of double shell microencapsulated ammonium polyphosphate and its flame retardance in polypropylene

Microencapsulated ammonium polyphosphate (MUFAPP) with a double shell is prepared by in situ polymerization, and is characterized by FTIR, XPS and SEM, etc. The microencapsulation of APP can increase its flame retardance and water resistance in PP. The flame retardant action of MUFAPP and APP in PP are studied using LOI and UL 94 test, and their thermal stability is evaluated by TG. The LOI value of the PP/MUFAPP composite at the same loading is higher than that of PP/APP composite. The LOI values of the PP/MUFAPP/ dipentaerythritol are higher than that of the PP/MUFAPP, and UL 94 ratings of most ternary composites are raised to V-0 at 30 wt.% loading. The results of the cone calorimeter also indicate that MUFAPP is an effective flame retardant in PP. The thermal degradation behaviors of APP and MUFAPP are studied using TG and dynamic FTIR.     

Influence of the pentaerythritol phosphate melamine salt content on the combustion and thermal decomposition process of intumescent flame‐retardant ethylene–vinyl acetate copolymer composites

Pentaerythritol phosphate melamine salt (PPMS) as a single‐molecule intumescent fire retardant was synthesized and characterized. The influence of the PPMS content on the combustion and thermal decomposition processes of intumescent‐flame‐retardant (IFR) ethylene–vinyl acetate copolymer (EVA) composites was studied by limiting oxygen index (LOI) measurement, UL 94 rating testing, cone calorimetry, thermogravimetric analysis, and scanning electron microscopy. The LOI and UL 94 rating results illustrate that PPMS used in EVA improved the flame retardancy of the EVA composites. The cone calorimetry test results show that the addition of PPMS significantly decreased the heat‐release rate, total heat release, and smoke‐production rate and enhanced the residual char fire performance of the EVA composites. The IFR–EVA3 composite showed the lowest heat‐release and smoke‐production rates and the highest char residue; this means that the IFR–EVA3 composite had the best flame retardancy. The thermogravimetry results show that the IFR–EVA composites had more residual char than pure EVA; the char residue yield increased with increasing PPMS content. The analysis results for the char residue structures also illustrated that the addition of PPMS into the EVA resin helped to enhance the fire properties of the char layer and improve the flame retardancy of the EVA composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42148.     

Synergistic effect of metal oxides on the flame retardancy and thermal degradation of novel intumescent flame‐retardant thermoplastic polyurethanes

The synergistic effects of some metal oxides on novel intumescent flame retardant (IFR)–thermoplastic polyurethane (TPU) composites were evaluated by limiting oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), cone calorimetry, and scanning electron microscopy. The experimental data indicated that the metal oxides enhanced the LOI value and restricted the dropping of the composites. The IFR–TPU composites passed the UL‐94 V‐0 rating test (1.6 mm) in the presence of magnesium oxide (MgO) and ferric oxide (Fe₂O₃) at 35 wt % IFR loading, whereas only the MgO‐containing IFR–TPU composite reached a UL‐94 V‐0 rating at 30 wt % IFR loading. The TGA results show that the metal oxides had different effects on the process of thermal degradation of the IFR–TPU compositions. MgO easily reacted with polyphosphoric acid generated by the decomposition of ammonium polyphosphate (APP) to produce magnesium phosphate. MgO and Fe₂O₃ showed low flammability and smoke emission due to peak heat release rate, peak smoke production rate, total heat release, and total smoke production (TSP). However, zinc oxide brought an increase in the smoke production rate and TSP values. Among the metal oxides, MgO provided an impressive promotion on the LOI value. The alkaline metal oxide MgO more easily reacted with APP in IFRs. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation of expandable graphite with silicate assistant intercalation and its effect on flame retardancy of ethylene vinyl acetate composite

A halogen‐free intumescent flame retardant expandable graphite composite (EG), with an initial expansion temperature of 202°C and expansion volume of 517 mL g⁻¹, was successfully prepared via a facile two‐step intercalation method, i.e. using KMnO₄ as oxidant and H₂SO₄, Na₂SiO₃·9H₂O as intercalators. The prepared EG flame retardant was characterized by field emission scanning electron microscope, X‐ray diffraction spectroscopy, energy dispersive spectroscopy and Fourier transform infrared spectroscopy. Furthermore, flame retardancy and thermal property of various ethylene vinyl acetate copolymer (EVA) composites, including EVA/EG and EVA/EG/APP (ammonium polyphosphate) specimens, were studied through limiting oxygen index instrument (LOI), vertical combustion UL‐94 rating, thermal gravimetric and differential thermal analysis. The results indicate that the EVA/EG and EVA/EG/APP composites exhibit a better flame retardancy. Addition of EG at a mass fraction of 30% leads LOI of 70EVA/30EG composite improved to 28.7%. Even more, the synergistic effect between EG and APP improves the LOI of 70EVA/10APP /20EG composite to 30.7%. This synergistic efficiency is attributed to the formation of compact and stable layer‐structure, and the prepared EG can make EVA composite reach the UL‐94 level of V‐0. POLYM. COMPOS., 36:1407–1416, 2015. © 2014 Society of Plastics Engineers     

Flame retardant and mechanical properties of epoxy composites containing APP−PSt core−shell microspheres

Ammonium polyphosphate (APP)–polystyrene (PSt) core–shell microspheres (CSPs) were synthesized via in situ radical polymerization. The core–shell structure was confirmed by transmission electron microscope (TEM). The results of optical contact angle measurements demonstrated a significant improvement in hydrophobicity of the modified APP. The obtained APP–PSt CSPs were added into epoxy (EP) system with various loadings. Effects of CSP on flame retardancy, thermal properties, heat release rate (HRR), smoke production, and mechanical properties of EP/CSP composites were investigated by limiting oxygen index (LOI), UL‐94 tests, thermogravimetric analysis (TGA), cone calorimeter, and tensile test. LOI and UL‐94 indicated that CSP remarkably improved the flame retardancy of EP composites. TGA showed that the initial decomposition temperature and the maximum‐rate decomposition temperature decreased, whereas residue yields at high temperature increased with the incorporation of microspheres. Cone calorimetry gave evidence that HRR, peak release rate, average HRR, and smoke production rate of EP/CSP composites decreased significantly. The morphology of char residues suggested that CSP could effectively promote EP to form high‐quality char layer with compact outer surface and swollen inner structure. Tensile strength of EP was enhanced with the addition of CSP. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40218.     

A novel intumescent flame‐retardant system for flame‐retarded LLDPE/EVA composites

A new intumescent flame retardant (IFR) system consisting of ammonium polyphosphate (APP) and charing‐foaming agent (CFA) and a little organic montmorillonite (OMMT) was used in low‐density polyethylene (LLDPE)/ethylene‐vinyl acetate (EVA) composite. According to limiting oxygen index (LOI) value and UL‐94 rating obtained from this work, the reasonable mass ratio of APP to CFA was 3 : 1, and OMMT could obviously enhance the flame retardancy of the composites. Cone calorimeter (CONE) and thermogravimetric analysis (TGA) were applied to evaluate the burning behavior and thermal stability of IFR‐LLDPE/EVA (LLDPE/EVA) composites. The results of cone calorimeter showed that heat release rate peak (HRR‐peak) and smoke production rate peak (SPR‐peak) and time to ignition (TTI) of IFR‐LLDPE/EVA composites decreased clearly compared with the pure blend. TGA data showed that IFR could enhance the thermal stability of the composites at high temperature and effectively increase the char residue. The morphological structures of the composites observed by scanning electron microscopy (SEM) and X‐ray diffraction (XRD) demonstrated that OMMT could well disperse in the composites without exfoliation, and obviously improve the compatibility of components of IFR in LLDPE/EVA blend. The morphological structures of char layer obtained from Cone indicated that OMMT make the char layer structure be more homogenous and more stable. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of tris(2‐hydroxyethyl) isocyanurate homopolymer and its application in intumescent flame retarded polypropylene

A macromolecular homopolymer (named as Homo‐THEIC) was synthesized through self‐etherification of tris(2‐hydroxyethyl) isocyanurate (THEIC) molecules and used as charring agent. Its chemical structure was characterized by FTIR and ¹³C‐NMR. The charring agent was mixed with ammonium polyphosphate (APP) and applied in flame retarded polypropylene (PP). Results of UL‐94, LOI, and cone calorimeter test showed that the LOI of flame retarded PP can reach 32.8% and UL‐94 V‐0 rating can be achieved at 30 wt % loading. The heat release rate and smoke production rate during the combustion of PP were substantially reduced. TGA results indicated that the synergistic effect between APP and Homo‐THEIC existed and the addition of intumescent flame retardant (IFR) dramatically enhanced the thermal stability of PP. According to the results of TGA, SEM, TG‐FTIR, FTIR, and Raman, the char forming process of IFR can be separated into three stages: the formation of viscous phosphate ester (T _onset?330 °C), the expanding process along with the decomposition of phosphate ester and the release of a large amount of gases (330–480 °C), and the final formation of graphitic‐like char without any expanding feature (480–670 °C). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44663.     

钼酸铵对EVA/NBR复合材料燃烧性能及热稳定性的影响

采用共混法在乙稀醋酸乙烯共聚物/丁腈橡胶（EVA/NBR）复合材料中加入钼酸铵（AHM）,通过烟密度测试、燃烧行为测试及热重分析研究了钼酸铵对复合体系的燃烧性能、抑烟性及热稳定性的影响。结果表明,添加1.0份（质量份,下同）AHM的复合材料的最大烟密度值降低到59.5 %,且烟密度等级仅为34.7,极限氧指数可达到33.3 %,UL 94垂直燃烧等级达到V-0级别,且燃烧时最大热释放速率从302 kW/m2降低到241 kW/m2;加入AHM后,复合材料的热稳定性提高;加入AHM后,烟密度实验后的残炭表面形貌更加致密。     

Flame retardancy and mechanical properties of EVA nanocomposites based on magnesium hydroxide nanoparticles/microcapsulated red phosphorus

The flame retardancy and mechanical properties of ethylene vinyl acetate (EVA) polymer nanocomposite based on magnesium hydroxide (MH) nanoparticles with lamellar‐shape morphological structures and synergistic agent microcapsulated red phosphorus (MRP) have been studied by limiting oxygen index (LOI), cone calorimeter test (CCT), UL‐94 test, tensile strength (TS), and elongation at break (EB). Results showed that LOI values of lamellar‐like nanosized MH (50 × 350 nm²) samples were 1–7 vol. % higher than those of the common micrometer grade MH (1–2 μm) in all additive levels. When 1–3 phr MRP substituted for nanosized MH filler, LOI value increased greatly from original 37 to 55, and met the V‐0 rating in the UL‐94 test. The values of TS for MH nanoparticles composites increased from 10.4 to 17.0 MPa as additive loading levels increased from 80 to 150 phr, respectively, while the corresponding values for common micrometer MH composites decreased steadily from 9.7 to 7.1 MPa. Thermogravimetric analysis (TGA) and dynamic Fourier‐transform infrared spectroscopy (FTIR) results revealed two‐step flame‐retardant mechanism. First, MH particles decompose endothermically with the release of 30.1% hydration water in the 320–370°C temperature range. Second, MRP promote the formation of compact charred layers slowly in the condensed phase in the 450–550°C temperature range. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Microencapsulation of ammonium polyphosphate: Preparation,characterization, and its flame retardance in polypropylene

Microencapsulated ammonium polyphosphate (MCAPP) with a melamine–formaldehyde (MF) resin coating layer was prepared by in situ polymerization. MCAPP was characterized by Fourier transform infrared, X‐ray photoelectron spectroscopy, and so on. The results show that the microencapsulation with MF resin leads to a decrease in the particles' size and water absorption. The flame retardant action and mechanism of MCAPP and ammonium polyphosphate (APP) in polypropylene are studied using limiting oxygen index (LOI) and UL 94 test, and their thermal stability is evaluated by thermogravimetric analysis. The LOI value of the PP/MCAPP composite at 30 wt% loading is 30.5%, whereas the corresponding value of the PP/APP composite is only 20%. Moreover, the LOI values of the PP/MCAPP/PER composites are higher than the ones of the PP/APP/PER composites. In the UL 94 test, the PP/MCAPP/PER composites with suitable ratios of MCAPP to PER can reach the V‐0 rating, and the best rating of the PP/APP/PER composites is V‐1. V‐1. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Flame retarded epoxy resins by adding layered silicate in combination with the conventional protection‐layer‐building flame retardants melamine borate and ammonium polyphosphate

The pyrolysis and flammability of phosphonium‐modified layered silicate epoxy resin nanocomposites (EP/LS) were evaluated when LS was combined with two flame retardants, melamine borate (MB) and ammonium polyphosphate (APP), that also act via a surface protection layer. Thermogravimetry (TG), TG coupled with Fourier Transform Spectroscopy (TG‐FTIR), oxygen index (LOI), UL 94 burning chamber (UL 94) and cone calorimeter were used. The glassy coating because of 10 wt % MB during combustion showed effects in the cone calorimeter test similar to nanodispersed LS, and somewhat better flame retardancy in flammability tests, such as LOI and UL 94. Adding APP to EP resulted in intumescent systems. The fire retardancy was particularly convincing when 15 wt % APP was used, especially for low external heat flux, and thus, also in flammability tests like LOI and UL 94. V0 classification is achieved when 15 wt % APP is used in EP. The flame retardancy efficiency of the protection layers formed does not increase linearly with the MB and APP concentrations used. The combination of LS with MB or APP shows antagonism; thus the performance of the combination of LS with MB or APP, respectively, was disappointing. No optimization of the carbonaceous‐inorganic surface layer occurred for LS‐MB. Combining LS with APP inhibited the intumescence, most probably through an increase in viscosity clearly above the value needed for intumescent behavior. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synergistic flame retardant effect of graphite powder in EVA/LDH composites

Abstract

Red mud (RM) is a large quantity waste product in the production of alumina. There is still no efficient way to deal with it in the world. Using RM as a raw material to synthesise Mg–Al–Fe ternary layered double hydroxide (LDH) is a feasible way to solve this global problem. The synthesised LDH was characterised by X-ray diffraction. The flame retardant and thermal degradation properties of ethylene-vinyl acetate/layered double hydroxide/graphite powder (EVA/LDH/GP) composites have been studied using cone calorimeter test (CCT), scanning electron microscopy (SEM), and thermogravimetry–Fourier transform infrared spectrometry (TG–IR). The CCT data indicate that heat release rates of EVA/LDH/GP composites decrease greatly in comparison with those of EVA, EVA/RM and EVA/LDH composites. The morphological structures of charred residues observed by SEM give positive evidence that the compact char residue layers formed from EVA/LDH/GP composites. The TG–IR is used to characterise volatilised products formed in the thermal degradation process.