Mechanical and thermal properties of thermoplastic polyurethane‐toughened polylactide‐based nanocomposites

The crystallinity and mechanical and thermal properties of polylactide (PLA)‐based biodegradable‐engineered plastic nanocomposites were determined. The nanocomposites were composed of thermoplastic polyurethane (TPU)‐toughened PLA, Talcum (Talc) and organic modified clay (montmorillonite; OMC). The tensile and flexural tests showed that PLA blended with 10 wt% TPU, 4 wt% Talc powder and 2 wt% OMC had the highest modulus and strength without a loss of elongation. The heat distortion temperature (HDT) tests demonstrated that the thermally treated PLA‐based nanocomposites had an HDT of nearly double the HDT for untreated specimens. An analysis of the polymer using scanning electron microscopy demonstrated that the incorporation of inorganic fillers altered the heterogeneous morphology of the PLA/TPU blend. This study investigated the feasibility of using PLA‐based nanocomposites for practical use, including applications in the automotive and furniture industries. POLYM. COMPOS., 35:1744–1757, 2014. © 2013 Society of Plastics Engineers     

PLA/PPC/OMMT纳米复合材料的结构与性能研究

采用双螺杆挤出机制备了聚乳酸（PLA）/聚碳酸亚丙酯（PPC）共混物和PLA/PPC/有机改性蒙脱土（OMMT）纳米复合材料,采用偏光显微镜、差示扫描量热仪和力学性能试验机等对共混物和纳米复合材料的相态结构、熔融与结晶行为和力学性能等进行了研究。结果表明,在PPC含量低于30 %时,随着PPC含量的增加,PLA/PPC和PLA/PPC/OMMT体系中PLA的玻璃化转变温度（Tg）均降低,在PPC含量为50 %时出现了明显的相分离;随着PPC含量的增加,PLA/PPC的冲击强度增大;OMMT的含量小于1.5 %时,PLA/PPC/OMMT体系的结晶度、拉伸强度、断裂伸长率和冲击强度均随OMMT含量的增加而增大。     

Mechanical,thermal, and morphological properties of injection molded poly(lactic acid)/SEBS‐g‐MAH/organo‐montmorillonite nanocomposites

Poly(lactic acid)/organo‐montmorillonite (PLA/OMMT) nanocomposites toughened with maleated styrene‐ethylene/butylene‐styrene (SEBS‐g‐MAH) were prepared by melt‐compounding using co‐rotating twin‐screw extruder followed by injection molding. The dispersibility and intercalation/exfoliation of OMMT in PLA was characterized using X‐ray diffraction and transmission electron microscopy (TEM). The mechanical properties of the PLA nanocomposites was investigated by tensile and Izod impact tests. Thermogravimetric analyzer and differential scanning calorimeter were used to study the thermal behaviors of the nanocomposite. The homogenous dispersion of the OMMT silicate layers and SEBS‐g‐MAH encapsulated OMMT layered silicate can be observed from TEM. Impact strength and elongation at break of the PLA nanocomposites was enhanced significantly by the addition of SEBS‐g‐MAH. Thermal stability of the PLA/OMMT nanocomposites was improved in the presence of SEBS‐g‐MAH. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Morphology,mechanical properties,and thermal stability of rigid PVC/clay nanocomposites

PVC/Poly(ε‐caprolactone) (PCL)/organophilic‐montmorillonite (OMMT) and PVC/Polylactide (PLA)/OMMT nanocomposites were prepared by a two‐step process. PCL/OMMT and PLA/OMMT master batches were prepared by melt blending using a two‐roller mill first, and then they were blended with PVC via extrusion. PVC/OMMT nanocomposites were also prepared using a two‐roller mill. Morphology, mechanical properties, and thermal stability were investigated. The formation of exfoliated or intercalated nanocomposites was confirmed by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Only the PVC/PCL/OMMT nanocomposite showed both higher tensile strength and stiffness than unfilled PVC. Atomic force microscopy (AFM) indicated dependency of this behavior not only on the clay dispersion, but also on the adhesion between the OMMT and the polymer matrix. Furthermore, scanning electron microscopy (SEM) showed that the large plastic deformation of the PVC/PCL matrix also contributed to the strength increase of the PVC nanocomposites. The effect of PCL/OMMT on the improvement of the thermal stability of PVC was remarkable while the effect of PLA/OMMT was moderate. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers.     

Preparation and characterization of nanoclay‐filled polyurethane/polypropylene blends

Ester‐based thermoplastic polyurethane (TPU) nanocomposites were prepared by melt blending at 190°C, using 3 wt% Cloisite 10A (organically modified montmorillonite clay) as the nanoscale reinforcement [TPU(C10A)]. The nanocomposites were subsequently melt‐blended with polypropylene (PP) using maleic anhydride–grafted polypropylene (MA‐g‐PP) as a compatibilizer [in the ratio of 70/30‐TPU/PP, 70/25/5‐TPU/PP/MA‐g‐PP, 70/25/5‐TPU (C10A)/PP/MA‐g‐PP]. Besides giving substantial increase in modulus, tensile strength, and other properties, organoclay reinforcement functions as a surface modifier for TPU hard segment resulting in improved dispersion. The morphology and other characteristics of the nanocomposite blends were investigated in terms of X‐ray diffraction, fourier transform infrared spectroscopy, differential scanning calorimetry, dynamic mechanical analysis, tensile properties, scanning electron microscopy, and atomic force microscopy. The results indicate that the ester‐TPU(C10A)/PP/MA‐g‐PP exhibited better dispersion than other blend systems; abrasion resistance and water absorption resistance were also better for this system. POLYM. ENG. SCI., 50:1878–1886, 2010. © 2010 Society of Plastics Engineers     

Biodegradable poly(l-lactide)/poly(?-caprolactone)-modified montmorillonite nanocomposites: Preparation and characterization

New nanocomposites were prepared by melt blending poly(l-lactide) (PLLA), poly(?-caprolactone) (PCL), and organically modified montmorillonite (OMMT). The obtained nanocomposites showed enhanced tensile strength, modulus and elongation at break than that of PLLA/PCL blends. The dynamic mechanical analysis showed the increasing mechanical properties with temperature dependence of nanocomposites. Wide-angle X-ray diffraction analysis and transmission electron microscopy indicated that the material formed the nanostructure. Adding OMMT improved the thermal stability and crystalline abilities of nanocomposites. The morphology was investigated by environmental scanning electron microscopy, which showed that increasing content of OMMT reduces the domain size of phase-separated particles. The specific interaction between each polymer and OMMT was characterized by the Flory-Huggins interaction parameter, B, which was determined by the equilibrium melting point depression of nanocomposites. The final values of B showed that PLLA was more compatible with OMMT than PCL.     

Microwave‐assisted preparation of polylactide/organomontmorillonite nanocomposites via in situ polymerization

Microwave technology was introduced to assist the synthesis of polylactide (PLA)/organomontmorillonite (OMMT) nanocomposites in bulk by the in situ ring‐opening polymerization of D,L ‐lactide. Factors that influenced the polymerizing effects, such as the microwave power, irradiation time, and dosages of the catalyst and OMMT, were studied in terms of tensile strength. The polymerization time was decreased dramatically to 10 min under 90 W of microwave irradiation, and the mechanical and thermal properties of the PLA/OMMT nanocomposites were significantly improved. The composite with the highest mechanical properties was obtained when the dosages of the OMMT and the catalyst were 1.0 and 0.6 wt % of the lactide, respectively. The initial decomposition temperature of the PLA/OMMT(1.0 wt % OMMT) nanocomposite was heightened 11.5°C compared with that of pure PLA. The results of scanning electron microscopy confirmed an improvement in the toughness with the addition of OMMT. The transmission electron microscopy and X‐ray diffraction results indicate that an exfoliated and intercalated nanocomposite was successfully prepared. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of thermoplastic polyurethane/organoclay nanocomposites by melt intercalation technique: Effect of nanoclay on morphology,mechanical, thermal,and rheological properties

Nanocomposites based on thermoplastic polyurethane (TPU) and organically modified montmorillonite (OMMT) were prepared by melt blending. Organically modified nanoclay was added to the TPU matrix in order to study the influence of the organoclay on nanophase morphology and materials properties. The interaction between TPU matrix and nanofiller was studied by infrared spectroscopy. Morphological characterization of the nanocomposites was carried out using X‐ray diffraction, transmission electron microscopy, and scanning electron microscopy techniques. The results showed that melt mixing is an effective process for dispersing OMMT throughout the TPU matrix. Nanocomposites exhibit higher mechanical and thermal properties than pristine TPU. All these properties showed an increasing trend with the increase in OMMT content. Thermogravimetric analysis revealed that incorporation of organoclay enhances the thermal stability of nanocomposites significantly. Differential scanning calorimetry was used to measure the melting point and the glass transition temperature (T_g) of soft segments, which was found to shift toward higher temperature with the inclusion of organoclays. From dynamic mechanical thermal analysis, it is seen that addition of OMMT strongly influenced the storage and loss modulus of the TPU matrix. Dynamic viscoelastic properties of the nanocomposites were explored using rubber process analyzer. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermal,mechanical and morphological properties of surface‐modified montmorillonite‐reinforced Viton rubber nanocomposites

Thermal, mechanical and morphological properties of surface‐modified montmorillonite (OMMT)‐reinforced Viton rubber nanocomposites were studied. The surface of montmorillonite was modified with a column chromatography technique using quaternary long‐chain ammonium salt as an intercalant, which resulted in uniform exchange of ions between montmorillonite and the ion‐exchange resin, and increased the d‐spacing to 31.5 Å. This improved d‐spacing was due to the use of an ion‐exchange column of sufficient length (35 cm) and diameter (5 cm) with maximum retention time for exchange of ions. The Viton nanocomposites reinforced with OMMT (3–12 wt%) were prepared using a two‐roll mill and moulded in a compression moulding machine. Tensile strength increased 3.17 times and elongation at break from 500 to 600% for 9 wt% loading of OMMT in comparison to pristine Viton rubber. Thermogravimetric analysis revealed that the presence of OMMT greatly improved the thermal stability. This improvement in properties with increasing OMMT loading was due to insertion of rubber chains between the OMMT plates with good wetting ability. Overall, at an optimum OMMT loading of 9 wt%, the properties of the Viton rubber nanocomposites improved, and subsequently worsened at 12 wt% due to agglomeration of OMMT as revealed by scanning electron microscopy and atomic force microscopy images. © 2013 Society of Chemical Industry     

Effects of thermoplastic poly(ether-ester) elastomer and bentonite nanoclay on properties of poly(lactic acid)

This work presented the influence of thermoplastic poly(ether-ester) elastomer (TPEE) and bentonite (BTN) on improving the mechanical and thermal properties of poly(lactic acid) (PLA). PLA was initially melt mixed with TPEE at six different loadings (5–30 wt%) on a twin screw extruder and then injection molded. The mechanical tests revealed an increasing impact strength and elongation at break with increasing TPEE loading, but a diminishing Young's modulus and tensile strength with respect to pure PLA. The blend at 30 wt% TPEE provided the optimum improvement in toughness, exhibiting an increase in the impact strength and elongation at break by 3.21- and 10.62-fold over those of the pure PLA, respectively. Scanning electron microscopy analysis illustrated a ductile fractured surface of the blends with the small dispersed TPEE domains in PLA matrix, indicating their immiscibility. The 70/30 (wt/wt) PLA/TPEE blend was subsequently filled with three loadings of BTN (1, 3, and 5 parts by weight per hundred of blend resin [phr]), where the impact strength, Young's modulus, tensile strength and thermal stability of all the blends were improved, while the elongation at break was deteriorated. Among the three nanocomposites, that with 1 phr BTN formed exfoliated structure and so exhibited the highest impact strength, elongation at break, and tensile strength compared to the other intercalated nanocomposites. Moreover, the addition of BTN was found to increase the thermal stability of the neat PLA/TPEE blend due to the barrier properties and high thermal stability of BTN.     

Comparison of natural halloysite with synthetic carbon nanotubes in poly(lactic acid) based composites

The objective of this study is to compare the mechanical properties, structure and degradability of the nanocomposites prepared with tubular nanofillers, halloysite (HNT) and carbon nanotube (CNT) in poly(lactic acid) (PLA), and thermoplastic polyurethane (TPU) toughened PLA (T‐PLA) matrices. In the PLA matrix, CNT increased, whereas HNT decreased the tensile strength with increasing filler content. Also, the elongation at break and impact strength decreased with increasing CNT content, but these properties were relatively unchanged with increasing HNT content. However, when (TPU) was used as an impact modifier‐compatibilizer, addition of HNT further increased the impact strength and the elongation at break of the matrix, since short and straight HNT fibers were pulled out from the extensible, toughened matrix. The long and curvy CNT fillers always caused brittle fracture and affected the impact strength and elongation at break in a negative manner as the CNT content was increased. Both types of fillers did not significantly influence the degradation of PLA or toughened PLA matrices. POLYM. COMPOS., 38:2337–2346, 2017. © 2015 Society of Plastics Engineers     

Effect of organoclay on the morphology,mechanical, thermal,and rheological properties of organophilic montmorillonite nanoclay based thermoplastic polyurethane nanocomposites prepared by melt blending

Polymer nanocomposites based on the thermoplastic polyurethane (TPU) and organically modified montmorillonite (OMMT) was prepared by melt intercalation technique using a laboratory internal batch mixer followed by compression molding. Varying amount of organically modified nanoclays (1, 3, 5, 7, and 9 wt%) was added to the TPU matrix to examine the influence of organoclay on nanophase morphology and structure–property relationships. The interaction between TPU matrix and nanofiller was studied by infrared spectroscopy. The morphology of nanocomposites was studied by X‐ray diffraction, transmission electron microscopy, and atomic force microscopy that shows melt mixing by a batch mixer is an effective method for dispersing OMMT throughout the TPU matrix. Thermogravimetric analysis revealed that incorporation of organoclay enhances the thermal stability of the nanocomposites significantly. Differential scanning calorimetry was employed to measure the melting point and glass transition temperature (T_g) of soft segments. The reinforcing effect of the organoclay was determined by dynamic mechanical analysis and physico–mechanical testing. The effects of nanoclay concentration and processing parameters on the dynamic viscoelastic properties of the nanocomposites were studied by a rubber process analyzer using frequency sweep. A significant increase in the viscosity and storage modulus of the nanocomposites was found with the increasing clay content. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Morphology,thermal and mechanical behavior of polypropylene nanocomposites toughened with poly(ethylene‐co‐octene)

Rubber‐toughened polypropylene (PP) nanocomposites containing organophilic layered silicates were prepared by means of melt extrusion at 230 °C using a co‐rotating twin‐screw extruder in order to examine the influence of the organoclay and the addition of PP grafted with maleic anhydride (PPgMAH) as a compatibilizer on the morphological, mechanical and thermal properties. The mechanical properties of rubber‐toughened polypropylene nanocomposites (RTPPNCs) were studied through tensile, flexural and impact tests. Scanning electron microscopy (SEM) was used for investigation of the phase morphology and rubber particles size. X‐ray diffraction (XRD) was employed to characterize the formation of nanocomposites. The thermal properties were investigated by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The dynamic mechanical properties were examined by using dynamic mechanical analysis (DMA). From the tensile and flexural tests, the optimum loading of organoclay in RTPP was found to be 6 wt%. The optimum loading of PPgMAH, based on the tensile and flexural properties, was also 6 wt%. The increase in the organoclay and PPgMAH content resulted in a severe embrittlement, manifested by a drop in the impact strength and tensile elongation at break. XRD studies revealed that intercalated RTPPNCs had been successfully prepared where the macromolecular PP segments were intercalated into the interlayer space of the organoclay. In addition, the organoclay was dispersed more evenly in the RTPPNC as the PPgMAH content increased. TGA results revealed that the thermal stability of the RTPPNC improved significantly with the addition of a small amount of organoclay. Copyright © 2006 Society of Chemical Industry     

Effect of clay type and polymer matrix on microstructure and tensile properties of PLA/LLDPE/clay nanocomposites

Polylactide (PLA)/linear low‐density polyethylene (LLDPE), (PLA/LLDPE), blends and nanocomposites were prepared by melt mixing process with a view to fine tune the properties. Two different commercial‐grade nanoclays, Cloisite® 30B (30B) and Cloisite® 15A (15A) were used. A terpolymer of ethylene, butylacrylate (BA) and glycidylmethacrylate (GMA) was used as a reactive compatibilizer. The influence of type of clay on the morphology and mechanical properties of two PLA‐rich and LLDPE‐rich blend systems was studied. Morphological analysis using X‐ray diffraction, transmission electron microscopy, and scanning electron microscopy revealed that the organoclay layers were dispersed largely at the interface of PLA/LLDPE. Decreasing the PLA content changed the morphology from droplet‐in matrix to coarse co‐continuous. In comparison with 30B, due to less affinity of 15A towards compatibilizer and PLA phase, the reduction of the size of dispersed phase was less than that of the equivalent 30B composites. The mechanical results demonstrated that the composites containing both types of organoclay exhibited higher modulus but lower elongation and tensile strength as compared to the neat blends. The injection molded nanocomposites were shown to have the sequential fracture behavior during tensile test. The tensile testing results on the neat blends and nanocomposites showed significant increase in elongation at break and decrease in the modulus as compared with the neat PLA. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 749‐758, 2013     

Polylactide,nanoclay, and core–shell rubber composites

Three types of composites, namely, polylactide (PLA)/nanoclay, PLA/core–shell rubber, and PLA/nanoclay/core–shell rubber, were melt compounded via a corotating twin‐screw extruder. The effects of two types of organically modified montmorillonite nanoclays (i.e., Cloisite®30B and 20A), two types of core (polybutylacrylate)–shell (polymethylmethacrylate) rubbers (i.e., Paraloid EXL2330 and EXL2314), and the combination of nanoclay and rubber on the mechanical and thermal properties of the composites were investigated. According to X‐ray diffraction and transmission electron microscopy analyses, both types of PLA/5 wt% nanoclay composites had an intercalated morphology. In comparison with pure PLA, both types of PLA/5 wt% nanoclay composites had an increased modulus, similar impact strength, slightly reduced tensile strength, and significantly reduced strain at break. On the other hand, PLA/EXL2330 composites with a rubber loading level of 10 wt% or higher had a much higher impact strength and strain at break, but a lower modulus and strength when compared with pure PLA. The simultaneous addition of 5 wt% nanoclay (Cloisite®30B) and 20 wt% EXL2330 resulted in a PLA composite with a 134% increase in impact strength, a 6% increase in strain at break, a similar modulus, and a 28% reduction in tensile strength in comparison with pure PLA. POLYM. ENG. SCI. 46:1419–1427, 2006. © 2006 Society of Plastics Engineers     

熔融插层法制备聚乳酸/有机蒙脱土纳米复合材料及其性能研究

以新疆地产蒙脱土和聚乳酸为原料,通过熔融插层的方法制备了聚乳酸(PLA)/有机蒙脱土（OMMT）纳米复合材料。分别采用X射线衍射仪、扫描电子显微镜、透射电子显微镜、热重分析仪等对复合材料的微观结构、形貌及热稳定性进行了表征和分析。研究表明,PLA大分子链已经插入OMMT片层间,层间距明显增大,形成PLA/OMMT纳米复合材料,体系的相容性良好。PLA/OMMT纳米复合材料的热失重曲线移向高温端,其热分解温度提高。PLA/OMMT纳米复合材料的熔点、维卡软化点、冲击强度、拉伸强度、热稳定性均比PLA基体有明显的提高。PLA/OMMT纳米复合材料的降解性初步研究表明其是一种良好的生物可降解环保塑料。     

The physical and mechanical properties of beta‐nucleated polypropylene/montmorillonite nanocomposites

Polypropylene (PP) and polypropylene/polypropylene‐g‐maleic anhydride/ organomontmorillonite (PP/PP‐g‐MA/OMMT) nanocomposites were modified with 0.05 to 0.3% (w/w) of the aryl amide β‐nucleator to promote the formation of hexagonal crystal modification (β‐phase) during melt crystallization. The nonisothermal crystallization behavior of PP, PP/PP‐g‐MA/OMMT and β‐nucleated PP/PP‐g‐MA/OMMT nanocomposites were studied by means of differential scanning calorimetry. Structure‐property relationships of the PP nanocomposites prepared by melt compounding were mainly focused on the effect and quantity of the aryl amide nucleator. The morphological observations, obtained from scanning electron microscopy, transmission electron microscopy and X‐ray diffraction analyses are presented in conjunction with the thermal, rheological, and mechanical properties of these nanocomposites. Chemical interactions in the nanocomposites were observed by FT‐IR. It was found that the β‐crystal modification affected the thermal and mechanical properties of PP and PP/PP‐g‐MA/OMMT nanocomposites, while the PP/PP‐g‐MA/OMMT nanocomposites of the study gained both a higher impact strength (50%) and flexural modulus (30%) compared to that of the neat PP. β‐nucleation of the PP/PP‐g‐MA/OMMT nanocomposites provided a slight reduction in density and some 207% improvement in the very low tensile elongation at break at 92% beta nucleation. The crystallization peak temperature (T_cp) of the PP/PP‐g‐MA/OMMT nanocomposite was slightly higher (116°C) than the neat PP (113°C), whereas the β‐nucleation increased the crystallization temperature of the PP/PP‐g‐MA/OMMT/aryl amide to 128°C, which is of great advantage in a commercial‐scale mold processing of the nanocomposites with the resulting lower cycle times. The beta nucleation of PP nanocomposites can thus be optimized to obtain a better balance between thermal and mechanical properties. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

High‐performance bio‐based poly(lactic acid)/natural rubber/epoxidized natural rubber blends: effect of epoxidized natural rubber on microstructure,toughness and static and dynamic mechanical properties

Attempts have been made to prepare high‐performance bio‐based blends through blending of poly(lactic acid) (PLA) with natural rubber (NR) in the presence of epoxidized natural rubber (ENR) as a compatibilizer. The prepared samples were characterized using differential scanning calorimetry, measuring the tensile properties and impact resistance, scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy and dynamic mechanical analysis (DMTA). Morphological studies revealed a matrix‐dispersed morphology for all blends, in which the average droplet size significantly decreased with the use of ENR. The elongation at break and impact strength of the blend containing 3 wt% ENR were 45 and 16 times those of neat PLA, respectively. These values are significantly higher than those previously reported for various simple and dynamically vulcanized rubber‐toughened PLAs. The influence of ENR on compatibility was confirmed by rheological tests, FTIR spectra and DMTA. DMTA also showed a marked increase in elastic modulus for the blend in the presence of 3 wt% ENR. The tensile properties and impact resistance were directly dependent on the ENR content and rubber droplet size. © 2018 Society of Chemical Industry     

Flexible and flame resistant poly(lactic acid)/organomontmorillonite nanocomposites

The PLA/OMMT nanocomposites were produced using a melt compounding technique with isopropylated triaryl phosphate ester flame retardant (FR; 10–30 parts per 100 resin). The flammability of the PLA/OMMT composites was evaluated with an Underwriter Laboratory (UL‐94) vertical burning test, and their char morphology was studied using scanning electron microscopy (SEM). The thermal properties of the PLA/OMMT were characterized with a thermogravimetric analyzer (TGA) and a differential scanning calorimeter (DSC). The thermal analyses showed that adding FR reduced the decomposition onset temperature (T_o) of PLA/OMMT. Both PLA/OMMT/FR20 and PLA/OMMT/FR30 showed excellent flame retardant abilities, earning a V‐0 rating during the UL‐94 vertical burning test. A compact, coherent and continuous protective char layer was formed in the PLA/OMMT/FR nanocomposites. Additionally, the DSC results indicated that the flexibility of the PLA/OMMT composites increased after adding FR due to the FR‐induced plasticization. The impact strength of PLA/OMMT was greatly increased by the addition of FR. Flexible PLA nanocomposites with high flame resistance were successfully produced. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41253.     

Effect of Organo-Modified Montmorillonite on the Morphology and Properties of SEBS/TPU Nanocomposites

In this study, novel polystyrene-b-poly(ethylene-butylene)-b-polystyrene (SEBS)/thermoplastic polyurethane (TPU)/organo-modified montmorillonites (OMMT) nanocomposites were prepared by melt mixing. Three different organo-modified montmorillonites, DK2, DK3, and DK4 (listed in descending order of hydrophilicity) were selected. The compatibilizing and reinforcing effects of OMMT on the structure, morphology, thermal stability, mechanical and rheological properties of the SEBS/TPU blends were studied. It was found that the hydrophilic DK2 nanoparticles were largely located in the continuous TPU phase and partially dispersed at the phase interphase, whereas DK3 and DK4 nanoparticles were preferentially located at the phase interface with an intercalated/exfoliated and intercalated structure, respectively. Scanning electron microscopy (SEM) results showed that SEBS/TPU/OMMT nanocomposites exhibited a more densely organized and interconnected structure compared with SEBS/TPU blends. Better thermal property was achieved after adding DK3, with the tensile properties of the SEBS/TPU increased considerably. Rheological analysis revealed that hydrophilic DK2 nanoparticles were more effective in improving rheology properties and showed a more pronounced nonlinear effect. The prepared SEBS/TPU/OMMT nanocomposites displayed desired thermal, mechanical and rheological properties, which are important for many applications. POLYM. ENG. SCI., 60:850–859, 2020. © 2020 Society of Plastics Engineers