Sorption of malachite green on chitosan bead

Chitosan bead was synthesized for the removal of a cationic dye malachite green (MG) from aqueous solution. The effects of temperature (303, 313 and 323 K), pH of the solution (2-11) on MG removal was investigated. Preliminary kinetic experiment was carried out up to 480 min. The sorption equilibrium was reached within 5 h (300 min). In order to determine the adsorption capacity, the sorption data were analyzed using linear form of Langmuir and Freundlich equation. Langmuir equation showed higher conformity than Freundlich equation. Ninety-nine percent removal of MG was reached at the optimum pH value of 8. From kinetic experiments, it was obtained that sorption process followed the pseudo-second-order kinetic model. This study showed that chitosan beads can be excellent adsorbents at high pH values. Activation energy value for sorption process was found to be 85.6 kJ mol(-1). This indicates that sorption process can be assumed as chemical process. Due to negative values of Gibbs free energy, sorption process can be considered as a spontaneous. In order to determine the interactions between MG and chitosan bead, FTIR analysis was also conducted.     

Equilibrium, kinetics and mechanism modeling and simulation of basic and acid dyes sorption onto jute fiber carbon: Eosin yellow, malachite green and crystal violet single component systems

Batch experiments were carried out for the sorption of eosin yellow, malachite green and crystal violet onto jute fiber carbon (JFC). The operating variables studied are the initial dye concentration, initial solution pH, adsorbent dosage and contact time. Experimental equilibrium data were fitted to Freundlich, Langmuir and Redlich-Peterson isotherm by non-linear regression method. Langmuir isotherm was found to be the optimum isotherm for eosin yellow/JFC system and Freundlich isotherm was found to be the optimum isotherm for malachite green/JFC and crystal violet/JFC system at equilibrium conditions. The sorption capacities of eosin yellow, malachite green and crystal violet onto JFC according to Langmuir isotherm were found to 31.49 mg/g, 136.58 mg/g, 27.99 mg/g, respectively. A single stage batch adsorber was designed for the adsorption of eosin yellow, malachite green and crystal violet onto JFC based on the optimum isotherm. A pseudo second order kinetic model well represented the kinetic uptake of dyes studied onto JFC. The pseudo second order kinetic model successfully simulated the kinetics of dye uptake process. The dye sorption process involves both surface and pore diffusion with predominance of surface diffusion at earlier stages. A Boyd plot confirms the external mass transfer as the rate limiting step in the dye sorption process. The influence of initial dye concentration on the dye sorption process was represented in the form of dimensionless mass transfer numbers (Sh/Sc(0.33)) and was found to be agreeing with the expression:     

Biosorption of Cu(II) from aqueous solutions by mimosa tannin gel

The biosorption of Cu(II) from aqueous solutions by mimosa tannin resin (MTR) was investigated as a function of particle size, initial pH, contact time and initial metal ion concentration. The aim of this study was to understand the mechanisms that govern copper removal and find a suitable equilibrium isotherm and kinetic model for the copper removal in a batch reactor. The experimental isotherm data were analysed using the Langmuir, Freundlich and Temkin equations. The equilibrium data fit well in the Langmiur isotherm. The experimental data were analysed using four sorption kinetic models -- the pseudo-first- and second-order equations, and the Elovich and the intraparticle diffusion equation -- to determine the best fit equation for the biosorption of copper ions onto mimosa tannin resin. Results show that the pseudo-second-order equation provides the best correlation for the biosorption process, whereas the Elovich equation also fits the experimental data well. Thermodynamic parameters such as the entropy change, enthalpy change and Gibb's free energy change were found out to be 153.0 J mol(-1)K(-1), 42.09 kJ mol(-1) and -2.47 kJ mol(-1), respectively.     

Biosorption of Acid Red 274 (AR 274) on Enteromorpha prolifera in a batch system

The biosorption of Acid Red 274 (AR 274) dye on Enteromorpha prolifera, a green algae grown on Mersin costs of the Mediterranean, Turkey, was studied as a function of initial pH, temperature, initial dye and biosorbent concentration. The experiments were conducted in a batch manner. The Langmuir and Freundlich isotherms were used for modelling the biosorption equilibrium. At optimum temperature 30 degrees C and initial pH 2.0-3.0, the Langmuir isotherm fits best to the experimental equilibrium data with a maximum monolayer coverage of 244 mg/g. The equilibrium AR 274 concentration of the exit stream of a single batch was also obtained by using the experimental equilibrium curve and operating line graphically. The pseudosecond-order kinetic model and Weber-Morris model were applied to the experimental data and it was found that both the surface adsorption as well as intraparticle diffusion contribute to the actual adsorption process. The biosorption process follows a pseudosecond-order kinetics and activation energy was determined as -4.85 kJ/mol. Thermodynamic studies showed that the biosorption of AR 274 on E. prolifera is exothermic and spontaneous in nature.     

Adsorption of 4-chlorophenol from aqueous solutions by xad-4 resin: isotherm, kinetic, and thermodynamic analysis

Removal of 4-chlorophenol (4-CP) from synthetic aqueous solutions through adsorption on Amberlite XAD-4 resin, a non-ionic macroreticular resins, under batch equilibrium experimental conditions at 298, 308 and 318K was investigated. It is necessary to propose a suitable model to a better understanding on the mechanism of 4-CP adsorption. For this purpose, Langmiur, Freundlich, Toth, and Redlich-Peterson (RP) isotherm models were compared. The two and three parameters in the adopted adsorption isotherm models were determined by the help of MATLAB package program. It was determined that best fitted adsorption isotherm models were obtained to be in the order: Redlich-Peterson>Langmuir>Toth>Freundlich isotherms. The pseudo-second-order kinetic model provided the best correlation to the experimental results. Results of the intra-particle diffusion model show that the pore diffusion is not the only rate limiting step. The lower correlation of the data to the Bangham's equation also represents that the diffusion of the adsorbate into pores of the sorbent is not the only rate-controlling step. The thermodynamic constants of adsorption phenomena; DeltaG degrees, DeltaH degrees, and DeltaS degrees were found as -4.17 (at 298K) kJ/mol, -42.01 kJ/mol, and -0.127 kJ/(mol K), respectively. The results showed that adsorption of 4-CP on Amberlite XAD-4, a nonionic polymeric resin was exothermic and spontaneous.     

Kinetic and isotherm studies of Cu(II) biosorption onto valonia tannin resin

The biosorption of Cu(II) from aqueous solutions by valonia tannin resin was investigated as a function of particle size, initial pH, contact time and initial metal ion concentration. The aim of this study was to understand the mechanisms that govern copper removal and find a suitable equilibrium isotherm and kinetic model for the copper removal in a batch reactor. The experimental isotherm data were analysed using the Langmuir, Freundlich and Temkin equations. The equilibrium data fit well in the Langmuir isotherm. The experimental data were analysed using four sorption kinetic models - the pseudo-first- and second-order equations, the Elovich and the intraparticle diffusion model equation - to determine the best fit equation for the biosorption of copper ions onto valonia tannin resin. Results show that the pseudo-second-order equation provides the best correlation for the biosorption process, whereas the Elovich equation also fits the experimental data well.     

Biosorption of Pb(II) and Cd(II) from aqueous solution using green alga (Ulva lactuca) biomass

The biosorption characteristics of Pb(II) and Cd(II) ions from aqueous solution using the green alga (Ulva lactuca) biomass were investigated as a function of pH, biomass dosage, contact time, and temperature. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the biosorption isotherm of the metal ions by U. lactuca biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The monolayer biosorption capacity of U. lactuca biomass for Pb(II) and Cd(II) ions was found to be 34.7mg/g and 29.2mg/g, respectively. From the D-R isotherm model, the mean free energy was calculated as 10.4kJ/mol for Pb(II) biosorption and 9.6kJ/mol for Cd(II) biosorption, indicating that the biosorption of both metal ions was taken place by chemisorption. The calculated thermodynamic parameters (DeltaG degrees , DeltaH degrees and DeltaS degrees ) showed that the biosorption of Pb(II) and Cd(II) ions onto U. lactuca biomass was feasible, spontaneous and exothermic under examined conditions. Experimental data were also tested in terms of biosorption kinetics using pseudo-first-order and pseudo-second-order kinetic models. The results showed that the biosorption processes of both metal ions followed well pseudo-second-order kinetics.     

Copper(II) and zinc(II) biosorption on Pinus sylvestris L

The biosorption properties of copper(II) and zinc(II) onto a cone biomass of Pinus sylvestris L. was investigated by using batch techniques. The biosorption studies carried out with single metal solutions. The removal of copper(II) and zinc(II) from aqueous solution increased with pH and sharply decreased when pH of the solution was decreased. The maximum biosorption efficiency of P. sylvestris was 67% and 30% for Cu(II) and Zn(II), respectively. Batch kinetic and isotherm of biosorption metal ions were investigated. The second-order kinetic model was used to correlate the experimental data. The Freundlich and Langmuir model can describe the adsorption equilibrium of metal(II) on cone biomass. The biosorption constants were found from the Freundlich and Langmuir isotherms at 25 degrees C. It is found that the biosorption data of metals on cone biomass fitted both the Freundlich and Langmuir adsorption models.     

Characteristics of equilibrium, kinetics studies for adsorption of fluoride on magnetic-chitosan particle

The magnetic-chitosan particle was prepared and characterized by the SEM, XRD, FT-IR and employed as an adsorbent for removal fluoride from the water solution in the batch system. The Langmuir isotherms, Bradley's isotherm, Freundlich isotherm and Dubinin-Kaganer-Radushkevich (DKR) isotherm were used to describe adsorption equilibrium. The kinetic process was investigated using the pseudo-first-order model, pseudo-second-order model and intra-particle diffusion model, respectively. The results show that the magnetic-chitosan particle is amorphous of irregular clumps in the surface with groups of RNH(2), RNH(3), Fe-O, etc. Bradley's equation and two-sites Langmuir isotherms were fitted well with the adsorption equilibrium data; the maximal amount of adsorption of 20.96-23.98 mg/l and free energy of 2.48 kJ/mol were obtained from the Bradley's equation, two-sites Langmuir isotherm and DKR modeling, respectively. The pseudo-second-order with the initial adsorption rate 2.08 mg/g min was suitable to describe the kinetic process of fluoride adsorption onto the adsorbent. In overall, the major mechanism of fluoride adsorption onto the heterogeneous surface of magnetic-chitosan particle was proposed in the study.     

Kinetic and equilibrium studies of methylene blue biosorption by Posidonia oceanica (L.) fibres

Batch biosorption experiments were carried out for the removal of methylene blue, a basic dye, from aqueous solution using raw Posidonia oceanica (L.) fibres, a marine lignocellulosic biomass. A series of assays were undertaken to assess the effect of the system variables, i.e. contact time, solution pH, biosorbent dosage and initial dye concentration. The results had showed that biosorption capacity was optimal using 6-9 solution pH range and by increasing the biosorbent concentration up to 1 g/L. The biosorption kinetics were analyzed using irreversible-first-order, reversible-first-order and pseudo-second-order and the sorption data were very well described by the pseudo-second-order model for the entire adsorption time with squared correlation coefficients equal to unity for all experimented initial dye concentrations. Besides, equilibrium data were very well represented by both Langmuir and Redlich-Peterson isotherm models followed by Freundlich, which confirm the monolayer coverage of methylene blue molecules onto P. oceanica fibres.     

Biosorption of heavy metals from aqueous solutions by chemically modified orange peel

Equilibrium, thermodynamic and kinetic studies were carried out for the biosorption of Pb(2+), Cd(2+) and Ni(2+) ions from aqueous solution using the grafted copolymerization-modified orange peel (OPAA). Langmuir and Freundlich isotherm models were applied to describe the biosorption of the metal ions onto OPAA. The influences of pH and contact time of solution on the biosorption were studied. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. According to the Langmuir equation, the maximum uptake capacities for Pb(2+), Cd(2+) and Ni(2+) ions were 476.1, 293.3 and 162.6 mg g(-1), respectively. Compared with the unmodified orange peel, the biosorption capacity of the modified biomass increased 4.2-, 4.6- and 16.5-fold for Pb(2+), Cd(2+) and Ni(2+), respectively. The kinetics for Pb(2+), Cd(2+) and Ni(2+) ions biosorption followed the pseudo-second-order kinetics. The free energy changes (ΔG°) for Pb(2+), Cd(2+) and Ni(2+) ions biosorption process were found to be -3.77, -4.99 and -4.22 kJ mol(-1), respectively, which indicates the spontaneous nature of biosorption process. FTIR demonstrated that carboxyl and hydroxyl groups were involved in the biosorption of the metal ions. Desorption of Pb(2+), Cd(2+) and Ni(2+) ions from the biosorbent was effectively achieved in a 0.05 mol L(-1) HCl solution.     

Sorption of SPADNS azo dye on polystyrene anion exchangers: Equilibrium and kinetic studies

The sorption of SPANDS from aqueous solution onto the macroporous polystyrene anion exchangers of weakly basic Amberlyst A-21 and strongly basic Amberlyst A-29 in a batch method was studied. The effect of initial dye concentration and phase contact time was considered to evaluate the sorption capacity of anion exchangers. Equilibrium data were attempted by various adsorption isotherms including the Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models. A comparison of kinetic models applied to the adsorption rate constants and equilibrium sorption capacities was made for the Lagergren first-order, pseudo second-order and Morris–Weber intraparticle diffusion kinetic models. The results showed that the adsorption isotherm is in the good agreement with the Langmuir equation and that the adsorption kinetics of SPADNS on both anion exchangers can be best described by the pseudo second-order model.     

Removal of lead from aqueous solution using Syzygium cumini L.: equilibrium and kinetic studies

The biosorption of lead ions from aqueous solution by Syzygium cumini L. was studied in a batch adsorption system as a function of pH, contact time, lead ion concentration, adsorbent concentration and adsorbent size. The biosorption capacities and rates of lead ions onto S. cumini L. were evaluated. The Langmuir, Freundlich, Redlich-Peterson and Temkin adsorption models were applied to describe the isotherms and isotherm constants. Biosorption isothermal data could be well interpreted by the Langmuir model followed by Temkin model with maximum adsorption capacity of 32.47 mg/g of lead ion on S. cumini L. leaves biomass. The kinetic experimental data were properly correlated with the second-order kinetic model.     

Biosorption of Pb(II) ions by modified quebracho tannin resin

In this study, the effect of temperature, pH and initial metal concentration on Pb(II) biosorption on modified quebracho tannin resin (QTR) was investigated. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to investigate QTR structure and morphology. Besides, the specific BET surface area and zeta-potential of the QTR were analysed. Thermodynamic functions, the change of free energy (DeltaG degrees), enthalpy (DeltaH degrees) and entropy (DeltaS degrees) of Pb adsorption on modified tannin resin were calculated as -5.43 kJ mol(-1) (at 296+/-2K), 31.84 kJ mol(-1) and 0.127 J mmol(-1) K(-1), respectively, indicating the spontaneous, endothermic and the increased randomness nature of Pb(2+) adsorption. The kinetic data was tested using pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion model. The results suggested that the pseudo-second-order model (R(2)>0.999) was the best choice among all the kinetic models to describe the adsorption behavior of Pb(II) onto QTR. Langmuir, Freundlich and Tempkin adsorption models were used to represent the equilibrium data. The best interpretation for the experimental data was given by the Langmuir isotherm and the maximum adsorption capacity (86.207 mg g(-1)) of Pb(II) was obtained at pH 5 and 296 K.     

Removal of basic yellow dye from aqueous solution by sorption on green alga Caulerpa scalpelliformis

Dynamic batch experiments were carried out for the biosorption of basic yellow dye on to the green macroalgae Caulerpa scalpelliformis. The factors affecting the sorption process such as the initial concentration of the dye and pH of the solution, the adsorbent dosage and the time of contact were studied. The sorption kinetics followed pseudo-second order kinetic model. The Caulerpa species exhibited a maximum uptake of 27 mg of dye per gram of seaweed. The Boyd's plot confirmed the external mass transfer as the rate-limiting step. The average effective diffusion coefficient was found to be 2.47 x 10(-4)cm(2)/s. Sorption equilibrium studies demonstrated that the biosorption followed Freundlich isotherm model, which implies a heterogeneous sorption phenomenon. Various thermodynamic parameters such as enthalpy of sorption DeltaH degrees , free energy change DeltaG degrees and entropy DeltaS degrees were estimated. The negative value of DeltaH degrees and negative values of DeltaG degrees show the sorption process is exothermic and spontaneous. The negative value of entropy DeltaS degrees shows the decreased randomness at the solid-liquid interface during the sorption of dyes onto green seaweed.     

Equilibrium and kinetic studies of methyl violet sorption by agricultural waste

In this work, sunflower (Helianthus annuus L.) seed hull (SSH), an agricultural waste, was evaluated for its ability to remove methyl violet (MV) from aqueous solutions. Sorption isotherm of MV onto the SSH was determined at 30 degrees C with the initial concentrations of MV in the range of 25-300 mg/L. The equilibrium data were analyzed using the Langmuir, Freundlich and Temkin isotherm models. The equilibrium process was described well by the Freundlich isotherm model. The maximum SSH sorption capacity was found to be 92.59 mg/L at 30 degrees C. The kinetic data were studied in terms of the pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models. The pseudo-second-order model best described the sorption process. A single-stage batch-adsorber design of the adsorption of MV onto SSH was studied based on the Freundlich isotherm equation. The results indicated that sunflower seed hull was an attractive candidate for removing methyl violet from aqueous solution.     

Adsorptive removal of direct azo dye from aqueous phase onto coal based sorbents: a kinetic and mechanistic study

This communication presents the results pertaining to the investigation conducted on color removal of trisazo direct dye, C.I.Direct Brown 1:1 by adsorption onto coal based sorbents viz. charfines, lignite coal, bituminous coal and comparing results with activated carbon (Filtrasorb-400). The kinetic sorption data indicated the sorption capacity of the different coal based sorbents. The sorption interaction of direct dye on to coal based sorbents obeys first-order irreversible rate equation and activated carbon fits with the first-order reversible rate equation. Intraparticle diffusion studies revealed the dye sorption interaction was complex and intraparticle diffusion was not only the rate limiting step. Isothermal data fit well with the rearranged Langmuir adsorption model. R(L) factor revealed the favorable nature of the isotherm of the dye-coal system. Neutral solution pH yielded maximum dye color removal. Desorption and interruption studies further indicated that the coal based sorbents facilitated chemisorption in the process of dye sorption while, activated carbon resulted in physisorption interaction.     

Silkworm exuviae--a new non-conventional and low-cost adsorbent for removal of methylene blue from aqueous solutions

In this paper, silkworm exuviae (SE) waste, an agricultural waste available in large quantity in China, was utilized as low-cost adsorbent to remove basic dye (methylene blue, MB) from aqueous solution by adsorption. Kinetic data and sorption equilibrium isotherms were carried out in batch process. The adsorption kinetic experiments revealed that MB adsorption onto SE for different initial dye concentrations all followed pseudo-second order kinetics and were mainly controlled by the film diffusion mechanism. Batch equilibrium results at different temperatures suggest that MB adsorption onto SE can be described perfectly with Freundlich isotherm model compared with Langmuir and D-R isotherm models, and the characteristic parameters for each adsorption isotherm were also determined. Thermodynamic parameters calculated show the adsorption process has been found to be endothermic in nature. The analysis for the values of the mean free energies of adsorption (E(a)), the Gibbs free energy (ΔG(0)) and the effect of ionic strength all demonstrate that the whole adsorption process is mainly dominated by ion-exchange mechanism, which has also been verified by variations in FT-IR spectra and pH value before and after adsorption and desorption studies. The results reveal that SE can be employed as a low-cost alternative to other adsorbents for MB adsorption.