乙烯酮(双乙烯酮)下游产品废水的治理技术

乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。     

基于组件技术的化工原理实验课件的设计

利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。     

分解炉扩径的技术改造

我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉     

水泥水化热测定方法综述

水泥水化热是中、低热水泥和核电工程用水泥的一项关键的技术指标。全球范围内测定水泥水化热的方法有溶解法、直接法/半绝热法、等温传导量热法三种。本文总结了中、美、欧相关方法标准,对其测试原理、仪器设备、试验过程等方面进行了比对,并对其在领域的应用做了简单的概括。     

几种乙炔加压设备性能的比较

阐述并比较了几种加压设备在乙炔加压清净过程中的性能和特点。     

A study of miscibility of blends of polybutadienes of varying microstructure

The miscibility of various amorphous polybutadienes with mixed microstructures of 1,4 addition units (cis, 1,4 and trans 1,4) and 1,2 addition units have been investigated. The studies here involved optical transparency, differential scanning calorimetry, and small angle light scattering. It was found that a 90 percent (cis) 1, 4 addition polybutadiene was immiscible with high (91 percent) 1,2 addition polybutadiene. Reduction of the 1,2 content to 71 percent induced an upper critical solution temperature (UCST) with the cis 1,4 polymer. Polybutadienes with 50 percent and 10 percent 1,2 contents were miscible above the crystalline melting temperature of the cis 1,4 polybutadiene. Immiscibility of the 91 percent 1,2 addition polymer was also found with a 10 percent 1,2 polybutadiene. The latter polymer also exhibits an UCST with the 71 percent 1,2 polymer. The results are used to interpret the characteristics of blends of polybutadienes of varying microstructure.     

粉煤灰中烧失量检测的不确定度分析

以F类粉煤灰为例,详细介绍了测定粉煤灰中烧失量的步骤、计算数学模型、影响测量不确定度的因素以及各项测量不确定度分量评定,人员、设备、材料、方法、环境都是影响测量不确定的因素。     

Process of acceleration of filtration of viscose

Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969.     

Theory of thermohydrodynamic instability of the front of filtration combustion of gases

Based on the filtration equations with account of heat transfer in the heating region, the problem of instability of small perturbations of the wave front of filtration combustion of a gas is solved. Expressions for the growth decrement and critical transverse size of a perturbation are obtained. The problem of the wave-front stability is solved with account of the macroscopic redistribution of filtration in the system. The solution includes macroscopic characteristics such as the transverse size, the width of the high-temperature zone, etc. A method is proposed for taking into account the influence of the characteristics of the system on the evolution of perturbations. It is shown that small deformation perturbations of the front always increase to a certain amplitude; their subsequent development— continuation of their growth or stabilization—is determined by the characteristics of the system. Translated fromFizika Goreniya i Vzryva, Vol. 35, No. 5, pp. 3–5, September–October 1999.     

Effect of Regime of Addition of Initiator on TEMPO-Mediated Polymerization of Styrene

Summary Investigation of the TEMPO-mediated polymerization of styrene at different regimes of addition of AIBN initiator showed that the course of the polymerization could be changed dramatically by a mode of the initiator addition without using any other additives. A very significant acceleration of the polymerization was reached at a specific regime without broadening the polydispersity of the resulting polymer.     

三种煤样燃烧热的测定

本文通过三个厂家提供的三种煤样燃烧热的测定,由测定结果综合得出3号煤样燃烧最完全、燃烧热也最大,是三个煤样中最好的一种。     

Implementation of the Results of Mathematical Modeling of Orientation of Polypropylene Fibre

Process schemes for implementation of the optimum conditions of the final stage of orientational drawing of PP fibre are proposed based on the results of mathematical modeling. The existence of successive stages of transformation of the structure of PP fibre in the second stage of orientational drawing was experimentally confirmed with indirect indexes. The necessity of selecting the draw ratio that ensures completeness of the given stage of structural transformation is demonstrated. Structural schemes are proposed for automated control systems for selecting the optimum draw ratio in the first and final stages of orientational drawing and control of the structure of the spun polymer with indirect parameters.     

煤气发生炉扩膛改造总结

着重介绍了J28型φ3000煤气发生炉扩膛为φ3200炉2种不同的改造方案，并进行了比较分析。     

阿伐他汀手性中间体合成研究进展

综述了近年来阿伐他汀手性中间体的合成研究进展,从手性池反应、不对称合成、外消旋体拆分三个方面介绍了阿伐他汀手性中间体合成的工艺路线和研究水平,对其工业化前景进行了展望.     

Coefficient of optimality of linings of heating units

The efficiency of the use of various refractories is estimated by an objective factor, namely, the coefficient of optimality of linings of heating units.Translated from Ogneupory, No. 12, pp. 26 – 27, December, 1994.