基于LEACH协议的能耗均衡路由算法

分析LEACH协议,指出其在簇头选择、簇头与基站通信方面存在的不足。针对上述问题,以均衡能耗和节省能量为出发点,结合LEACH-C的特点及Dijkstra算法对LEACH协议进行改进,提出LEACH-EB协议。仿真结果表明,LEACH-EB协议能有效节省能量,均衡能量消耗,延长网络生命周期。     

基于位置和剩余能量的局部集中式LEACH算法研究*

传统的LEACH协议采用分布式算法,未考虑节点能量,改进的LEACH-C采用集中式的选簇算法,对于大规模的网络不适合。针对这些问题,提出一种基于位置和剩余能量的局部集中式分簇算法LEACH-LC。由簇头对簇成员的能量、位置进行评估,采用模拟退火算法确定局部较优的分簇。OMNet++仿真结果表明,改进算法在网络生存期和节点能耗上优于LEACH算法。     

基于吸引因子和混合传输的分簇路由算法

为了能够有效地降低无线传感器网络(WSN)的能耗,延长网络生命周期,对低功耗自适应集簇分层型(LEACH)协议等多个分簇路由协议进行分析,并针对其算法存在的缺陷提出基于吸引因子和多跳传输的分簇路由算法(CRAH)。针对不合理的簇头选择问题,采用加权和的方法将节点剩余能量与节点位置两个参数,作为簇头选择的新指标;对簇头节点的任务进行重新分配,选出新的融合节点;融合节点和基站的通信采用单跳与多跳相结合的混合传输方式,结合吸引因子和Dijkstra算法提出新的基于吸引因子的Dijkstra(AF-DK)算法,为融合节点找到最优转发路径。仿真结果表明,与LEACH、集中式低功耗自适应集簇分层型(LEACH-C)路由和固定簇半径的分簇(HEED)等协议相比,CRAH使网络寿命分别提高了约51.56%、47.1%和42%,网络能耗速度明显减缓,基站接收的数据量平均减少了69.9%。CRAH使簇头选择更加合理,有效减少了通信过程中的冗余数据,均衡了网络能耗,延长了网络生命周期。     

无线传感器网络LEACH路由协议的研究与改进

LEACH（Low Energy Adaptive Clustering Hierarchy）是一种经典的WSN分层路由协议,它采取自适应分簇算法,一定程度上延长了网络生存期。然而LEACH路由协议的簇头随机产生,没有考虑节点的剩余能量,未达到簇头最优。LEACH簇头与基站直接通信,如果两者距离较远,则会带来较大的能量损耗。结合LEACH及LEACH现有的一些改进算法,提出了一种新的路由协议（Advance-Leach）。它综合考虑了节点的剩余能量和簇首节点数目,簇头和基站之间采用单跳和多跳结合策略,有效地降低了能耗,保证了网络负载的平衡。仿真结果表明：该协议的能耗、数据成功接收率等性能得到了有效提高,延长了节点和网络的生命周期。     

无线传感器网络分簇路由协议的改进研究

针对无线传感器网络（WSN）中分簇路由协议LEACH算法中簇首分配不均以及簇首与Sink节点直接通信问题进行研究．提出一种基于LEACH成簇思想的分簇路由协议。该算法基于节点剩余能耗和已担任簇首时间选举簇头。簇头间采用贪婪算法形成一条链,在该链中又选出一个簇头,将整个网络的数据融合后转发给基站。MatLab仿真结果显示,改进后的算法在均衡网络节点能耗和网络的生存时间上比LEACH算法有很大提高。     

无线传感器网络分簇路由协议的改进研究

针对无线传感器网络(WSN)中分簇路由协议LEACH算法中簇首分配不均以及簇首与Sink节点直接通信问题进行研究,提出一种基于LEACH成簇思想的分簇路由协议。该算法基于节点剩余能耗和已担任簇首时间选举簇头。簇头间采用贪婪算法形成一条链,在该链中又选出一个簇头,将整个网络的数据融合后转发给基站。MatLab仿真结果显示,改进后的算法在均衡网络节点能耗和网络的生存时间上比LEACH算法有很大提高。     

基于能量优化的无线传感器网络分簇路由算法研究

无线传感器网络的路由协议设计要同时关注单个节点的能耗及整个网络能量的均衡消耗.分簇算法能有效解决节点能耗受限与不同节点能量开销不平衡问题.在分析了传统分簇路由LEACH(low energy adaptive clustering hierarchy)协议中选择簇头算法不足和当前一些典型基于LEACH思想的路由改进算法...     

固定簇的LEACH半径自适应簇头改进算法

针对无线传感器网络路由协议LEACH(Low Energy Adaptive Clustering Hierarchy)算法中簇头选择不合理以及节点能耗不均的缺点,提出了一种基于LEACH的节能算法LEACH-RA.所有节点分为固定的簇,簇内节点根据所处簇的半径进行自适应的选择簇头.通过NS2仿真证明了改进后的协议有效...     

基于蚁群的无线传感器网络双簇头算法

在无线传感器网络分层路由协议LEACH的基础上,重新定义了"轮"的概念,把每一轮划分成3个阶段而不是传统的2个阶段.提出基于蚁群的双簇头算法,根据信息素浓度在每一簇中选择具有分工特征的主簇头和副簇头,分别进行数据收集、融合、传输等工作.与LEACH和LEACH-C算法进行实验比较,该算法较好地平衡了网络的能量消耗,延长了网络的生命周期.     

基于能量和距离加权的WSNs簇头选择算法

针对LEACH分簇路由协议存在的簇头数目和分布位置不合理等问题导致能耗不均衡、网络周期不理想,提出了一种基于能量和距离加权的簇头选择优化算法。通过加入节点到基站的距离和节点剩余能量作为簇头选取的参考因素,依据改进后的阈值公式使得选取的簇头数达到预设最优值,并通过簇头的二次选择,最终确定最佳的簇头。仿真结果表明:相比于LEACH协议,该算法可以有效地延长网络生命周期,使网络能耗更加均衡。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

How do children do mathematics with LOGO?

Abstract  This paper considers some results of a study designed to investigate the kinds of mathematical activity undertaken by children (aged between 8 and 11) as they learned to program in LOGO. A model of learning modes is proposed, which attempts to describe the ways in which children used and acquired understanding of the programming/mathematical concepts involved. The remainder of the paper is concerned with discussing the validity and limitations of the model, and its implications for further research and curriculum development.