Synthesis,Crystal Structure,and Thermal Behaviors of 3‐Nitro‐1,5‐bis(4,4′‐dimethylazide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP)

The energetic material, 3‐nitro‐1,5‐bis(4,4′‐dimethyl azide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP), was firstly synthesized by means of Click Chemistry using 1,5‐diazido‐3‐nitrazapentane as main material. The structure of NDTAP was confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy; mass spectrometry, and elemental analysis. The crystal structure of NDTAP was determined by X‐ray diffraction. It belongs to monoclinic system, space group C2/c with crystal parameters a=1.7285(8) nm, b=0.6061(3) nm, c=1.6712(8) nm, β=104.846(8)°, V=1.6924(13) nm³, Z=8, μ=0.109 mm⁻¹, F(000)=752, and D_c=1.422 g cm⁻³. The thermal behavior and non‐isothermal decomposition kinetics of NDTAP were studied with DSC and TG‐DTG methods. The self‐accelerating decomposition temperature and critical temperature of thermal explosion are 195.5 and 208.2 °C, respectively. NDTAP presents good thermal stability and is insensitive.     

Superbase‐Catalyzed [4+2] Cycloaddition of Acetylenes to 3,6‐Di(pyrrol‐2‐yl)‐1,2,4,5‐tetrazine: A Facile Synthesis of 3,6‐Di(pyrrol‐2‐yl)pyridazines

Acetylenes undergo the [4+2] cycloaddition to 3,6‐di(pyrrol‐2‐yl)‐1,2,4,5‐tetrazine in the potassium hydroxide/dimethyl sulfoxide or potassium tert‐butoxide/dimethyl sulfoxide systems (80 °C, 2.5–4 h) to afford (after extrusion of the nitrogen molecule from the intermediate) 3,6‐di(pyrrol‐2‐yl)pyridazines in up to 73% yield, while under non‐catalytic conditions this reaction does not take place. This unusual result substantially extends the scope of synthetic application and mechanistic diversity of the Diels–Alder reaction. The step‐wise mechanisms involving the formation of [OH/tetrazine]⁻ or [t‐BuO/tetrazine]⁻ anionic intermediate complexes or cycloaddition of tetrazine to the acetylide anion are considered.     

An Ab Initio Theoretical Study of 2,4,6‐Trinitro‐1,3,5‐Triazine, 3,6‐Dinitro‐1,2,4,5‐Tetrazine,and 2,5,8‐Trinitro‐Tri‐s‐Triazine

In order to evaluate 2,4,6‐trinitro‐1,3,5‐triazine (TNTAz), 3,6‐dinitro‐1,2,4,5‐tetrazine (DNTAz), and 2,5,8‐trinitro‐tri‐s‐triazine (TNTsTAz), the geometries of these compounds have been fully optimized employing the B3LYP density functional method and the AUG‐cc‐pVDZ basis set. The accurate gas phase enthalpies of formation have been obtained by using the atomization procedure and designing isodesmic reactions in which the parent rings are not destroyed. Based on B3LYP/AUG‐cc‐pVDZ calculated geometries and natural charges, the crystal structures have been predicted using the Karfunkel–Gdanitz method. Computed results show that there exists extended conjugation over the parent rings of these compounds. More energy content is reserved in DNTAz than in both TNTAz and TNTsTAz. The title compounds are much more sensitive than 1,3,5‐trinitrobenzene. The calculated detonation velocity of DNTAz reaches 9.73–9.88 km s⁻¹, being larger than those of CL‐20 and TNTAz. TNTsTAz has no advantage over the widely used energetic compounds such as RDX and HMX.     

Construction of 2,3,4,7‐Tetrahydro‐1,2,4,5‐oxatriazepines via [4+3] Cycloadditions of α‐Halogeno Hydrazones with Nitrones

In the presence of sodium carbonate, the [4+3] cycloadditions of α‐halogeno hydrazones with nitrones were performed efficiently, and affording 2,3,4,7‐tetrahydro‐1,2,4,5‐oxatriazepines in moderate to high yields.

     

Sulfur‐Assisted and 1,8‐Diazabicyclo[5.4.0]undec‐7‐ene (DBU)‐Catalyzed Cyclization of 2‐Alkynylanilines for the Metal‐Free Synthesis of Indole Derivatives

A sulfur‐assisted and 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU)‐catalyzed cyclization of 2‐alkynylanilines for the metal‐free synthesis of indole derivatives is reported. As a result of the metal‐free process, the ready availability of the starting materials and the simple and convenient operation, the type of reaction presented here has potential utility in organic synthesis. A 10‐gram scale preparation may demonstrate the possibility of its application in the environmentally friendly synthesis of indole derivatives.     

Efficient Syntheses of (Thio)phosphonylated Isobenzofurans by Tandem Nucleophilic Addition and Regioselective 5‐exo‐dig Addition to Carbon‐Carbon Triple Bond: Cooperative Effect to 1,8‐Diazabicyclo[5.4.0]undec‐7‐ene (DBU)

The tandem nucleophilic addition‐cyclization reaction of o‐alkynylbenzaldehydes or o‐alkynylacetophenones 2 with dialkyl phosphites or dialkyl phosphonothioates 1 took place very smoothly in the presence of 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) in THF at room temperature. In all cases, the reaction proceeded in a regioselective manner leading to the 5‐exo‐dig products 3 in excellent yields. The phenomenon of a 1,5‐sigmatropic hydrogen shift or a 1,5‐sigmatropic methyl shift was observed in this reaction depending on the different substituent groups such as R³ in the o‐alkynylbenzaldehyde or o‐alkynylacetophenone 2 substrates.     

Palladium(0)/Copper(I)‐Catalyzed Tandem Cyclization of Aryl 1‐Cyanoalk‐5‐ynyl Ketone System: Rapid Assembly of Cyclopenta[b]naphthalene and Benzo[b]fluorene Derivatives

We have developed a new and general approach to construct a variety of benzo[b]fluorene and cyclopenta‐[b]naphthalene derivatives via the palladium(0)/copper(I)‐catalyzed tandem cyclization of aryl 1‐cyanoalk‐5‐ynyl ketone systems in an extremely efficient manner. The key operation lies in the copper(I)‐catalyzed aerobic oxidation, which allows for activation of two successive intramolecular cycloadditions immediately after the Sonogashira coupling reaction has occurred.     

Iron(III) Chloride and Diorganyl Diselenide‐Promoted Nucleophilic Closures of 1‐Benzyl‐2‐alkynylbenzenes in the Preparation of 9‐(Organoselanyl)‐5H‐benzo[7]annulenes

Iron‐promoted cyclization of 1‐benzyl‐2‐alkynylbenzenes with diorganyl diselenides led to the synthesis of 9‐(organoselanyl)‐5H‐benzo[7]annulenes whereby the mutual action between diorganyl diselenides and iron(III) chloride in a 0.5:1.0 mol ratio was essential in order to achieve the maximal yields of the products. The cyclization reaction tolerated a variety of functional groups, such as trifluoromethyl, chloro, fluoro and methoxy, in both the 1‐benzyl‐2‐alkynylbenzenes and the diorganyl diselenides, giving the seven‐membered heterocyclic products exclusively via a 7‐endo‐dig cyclization process.

     

Iodine‐Mediated Copper‐Catalyzed Efficient α‐C(sp2)‐Thiomethylation of α‐Oxoketene Dithioacetals with Dimethyl Sulfoxide in One Pot

The direct α‐Csp² H functionalization and thiomethylation of α‐oxoketene dithioacetals (DTAs) has been accomplished with dimethyl sulfoxide (DMSO) in the presence of iodine and a copper(I) salt for the first time. A prerequisite is the in situ iodination of the α‐Csp² atom of dithioacetals that could offer other reaction channels. The operationally simple one‐pot protocol includes region‐defined consecutive iodination and sulfenylation of the challenging α‐Csp² H bond of dithioacetals employing cheap and readily available reagents. DMSO here plays a dual role as thiomethyl source and solvent.

     

Iron(III) Chloride‐Catalyzed Tandem Aza‐Prins/Friedel–Crafts Cyclization of 2‐Arylethyl‐2,3‐butadienyl Tosylamides and Aldehydes‐An Efficient Synthesis of Benzo[f]isoquinolines

An efficient approach for the synthesis of 1,2,3,4,5,6‐hexahydrobenzo[f]isoquinolines via a tandem aza‐Prins/Friedel–Crafts cyclization from 2‐arylethyl‐2,3‐butadienyl tosylamides and aldehydes has been developed. This iron(III) chloride‐catalyzed cascade cyclization at the room temperature with different types of aldehydes, such as aromatic and heteroaromatic aldehydes, alkyl aldehydes, and α,β‐unsaturated aldehydes, affords the products in moderate to excellent yields (up to 97 %). In this reaction, chlorotrimethylsilane was applied to activate the aldehydes. The cheap catalyst, the mild reaction conditions, and the broad scope of the substrates make this method highly useful.

     

Synthesis and properties of novel poly(urethane‐imide) dispersions based on 2,2‐bis[N‐(3‐hydroxyphenyl)phthalimidyl]hexafluoropropane

Imide units are incorporated into thermoplastic and solvent‐based polyurethane (PU) chains to improve the thermal stability of PU. However, these poly(urethane‐imide) (PUI) materials have poor processablity and suffer from solvent emission. To prepare easily processable and environmentally friendly PUI products, some waterborne PUIs are synthesized using a prepolymer process. A series of PUI dispersions with 25 wt % solid content, viscosities of 7.5–11.5 cps, and particle sizes of 63–207 nm was prepared. The composition–property relationship of PUIs, including the solubility behavior of PUI cast films, and their thermal and mechanical properties were established. The solvent resistance and tensile strength of PUI film increased with the number of imide groups. All PUIs exhibited improved thermal stability but not char yield as the temperature increased. The inclusion of a little imide increased the decomposition temperature of PUI while maintaining the elasticity of the polymer, revealing successful translation of PUI into the water‐based form. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Vapor Pressures,Mass Spectra and Thermal Decomposition Processes of Bis(2,2‐Dintropropyl)acetal (BDNPA) and Bis(2,2‐Dinitropropyl)formal (BDNPF)

Simultaneous thermogravimetric modulated beam mass spectrometry (STMBMS) and Fourier‐transform ion cyclotron resonance (FTICR) instruments have been used to measure the mass spectra, measure vapor pressures and evaluate the thermal decomposition mechanism of bis(2,2‐dinitropropyl)acetal (BDNPA) and bis(2,2‐dinitropropyl)formal (BDNPF). The high mass accuracy FTICR mass spectra provide the chemical formulas of the ion fragments formed in the mass spectra of BDNPA, BDNPF and their decomposition products, and provide a basis for predicting possible structures of the ion fragments. The heat of vaporization (Δ_vapH) and vapor pressure at 25 °C are 93.01±0.38 kJ/mol and 1.4532+0.40/−0.27 mPa for BDNPA, and 84.77±0.88 kJ/mol and 2.20+1.87/−1.07 mPa for BDNPF. STMBMS data support a nitro‐nitrite ( NO₂→ O NO) rearrangement mechanism for both compounds. Upon rearrangement, both NO and NO₂ are cleaved from the structure, thus producing a ketone radical. The nitro‐nitrite rearrangement begins to occur at appreciable rates between 160 and 180 °C. Additional decomposition products include amines, imines and amides, as well as CO₂ and H₂O at higher temperatures. STMBMS mass loss data suggest the formation of a residue during the decomposition of BDNPA and BDNPF. The major difference between the decomposition of the two compounds is the slower reaction rate of BDNPF. We postulate that the less sterically hindered formal carbon of BDNPF subjects it to interactions with an intermediate, thus forming a complex and delaying its release. Methods to elucidate complex thermal decomposition mechanisms from STMBMS data are illustrated.     

tert‐Butyl Hydroperoxide and Tetrabutylammonium Iodide‐Promoted Free Radical Cyclization of α‐Imino‐N‐arylamides and α‐Azido‐N‐arylamides

The oxidizing system of tert‐butyl hydroperoxide (TBHP) and tetrabutylammonium iodide (TBAI) is capable of generating α‐(arylaminocarbonyl)iminyl radicals from ethyl 2‐(N‐arylcarbamoyl)‐2‐iminoacetates. These iminyl radicals preferably undergo intramolecular ipso attack on the benzene ring to give azaspirocyclohexadienyl radicals, which are readily captured by molecular oxygen under an oxygen atmosphere to yield azaspirocyclohexadienones. In the absence of oxygen, the reaction affords quinoxalin‐2‐one products. This oxidizing system is also effective to convert α‐aryl‐α‐azido‐N‐arylamides to the corresponding iminyl radicals under basic conditions (sodium tert‐butoxide, t‐BuONa), and the subsequent cyclization of these iminyl radicals results in the formation of azaspirocyclohexadienone products in high yields under an oxygen atmosphere. Plausible mechanisms are proposed to rationalize the experimental results, and factors influencing the reactions are discussed.

     

New light‐emitting poly{(9,9‐di‐n‐octylfluorenediyl vinylene)‐alt‐[1,5‐(2,6‐dioctyloxy)naphthalene vinylene]}

A new conjugated light‐emitting AB copolymer containing alternating fluorene and naphthalene units, poly{(9,9‐di‐n‐octylfluorenediyl vinylene)‐alt‐[1,5‐(2,6‐dioctyloxy)naphthalene vinylene]} (PFV‐alt‐PNV), was synthesized via Horner‐Emmons polymerization. The polymer is completely soluble in common organic solvents and exhibits good thermal stability up to 400 °C. UV‐visible, fluorescence and photoluminescence measurements of the copolymer show peak maxima at 427, 500 and 526 nm, respectively. A light‐emitting device containing the new polymer was fabricated using a simple indium tin oxide configuration: (ITO)/PEDOT:PSS/PFV‐alt‐PNV/Al. Measurements of current versus electric field were carried out, with an onset of light emission occurring at 2.5 V. The electroluminescence brightness was observed to reach a maximum of 5000 cd m^?2. Copyright © 2011 Society of Chemical Industry     

Biodegradable polymers based on renewable resources. V. Synthesis and biodegradation behavior of poly(ester amide)s composed of 1,4:3,6‐dianhydro‐D‐glucitol, α‐amino acid,and aliphatic dicarboxylic acid units

A series of poly(ester amide)s were synthesized by solution polycondensations of various combinations of p‐toluenesulfonic acid salts of O,O′‐bis(α‐aminoacyl)‐1,4:3,6‐dianhydro‐D ‐glucitol and bis(p‐nitrophenyl) esters of aliphatic dicarboxylic acids with the methylene chain lengths of 4–10. The p‐toluenesulfonic acid salts were obtained by the reactions of 1,4:3,6‐dianhydro‐D ‐glucitol with alanine, glycine, and glycylglycine, respectively, in the presence of p‐toluenesulfonic acid. The polycondensations were carried out in N‐methylpyrrolidone at 40°C in the presence of triethylamine, giving poly(ester amide)s having number‐average molecular weights up to 3.8 × 10⁴. Their structures were confirmed by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. Most of these poly(ester amide)s are amorphous, except those containing sebacic acid and glycine or glycylglycine units, which are semicrystalline. All these poly(ester amide)s are soluble in a variety of polar solvents such as dimethyl sulfoxide, N,N‐dimethylformamide, 2,2,2‐trifluoroethanol, m‐cresol, pyridine, and trifluoroacetic acid. Soil burial degradation tests, BOD measurements in an activated sludge, and enzymatic degradation tests using Porcine pancreas lipase and papain indicated that these poly(ester amide)s are biodegradable, and that their biodegradability markedly depends on the molecular structure. The poly(ester amide)s were, in general, degraded more slowly than the corresponding polyesters having the same aliphatic dicarboxylic acid units, both in composted soil and in an activated sludge. In the enzymatic degradation, some poly(ester amide)s containing dicarboxylic acid components with shorter methylene chain lengths were degraded more readily than the corresponding polyesters with Porcine pancreas lipase, whereas most of the poly(ester amide)s were degraded more rapidly than the corresponding polyesters with papain. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2721–2734, 2001     

Thermal and Combustion Properties of 3,4‐Bis(3‐nitrofurazan‐4‐yl)furoxan (DNTF)

Thermal decomposition of melted 3,4‐bis(3‐nitrofurazan‐4‐yl)furoxan (DNTF) in isothermal conditions was studied. The burning rates of DNTF were measured in the pressure interval of 0.1–15 MPa. The thermal stability of DNTF was found to be close to the stability of HMX, while the burning rate of DNTF was close to the burning rate of CL‐20. The thermocouple measurements in the combustion wave of DNTF showed that combustion of DNTF was controlled by the gas‐phase mechanism. The DNTF vapor pressure was determined from thermocouple measurements and agreed well with data obtained at low temperatures under isothermal conditions.     

Study on Crystal Structure and Thermal Decomposition Mechanism of a Novel Coordination Compound [Zn(DAT)2(H2O)4](PA)2⋅2H2O

A novel coordination compound [Zn(DAT)₂(H₂O)₄](PA)₂⋅2H₂O has been synthesized using 1,5‐diaminotetrazole (DAT) as ligands. It crystallizes in the monoclinic space group C2/c, with a=1.51973(19) nm, b=0.67904(9) nm, c=3.0712(4) nm, β=90.507(2)°, V=3.1692(7) nm³, Z=4, and μ=0.888 mm⁻¹. With the intermolecular hydrogen bonds, molecules are linked together to form a three‐dimensional net structure. Thermal decomposition mechanism of the title compound was predicted based on DSC, TG‐DTG, and FT‐IR analyses. The kinetic parameters of the first exothermic process of the title compound were studied applying the Kissinger's and Ozawa–Doyle's methods.     

Microwave‐Assisted Facile Synthesis of Furo[3,2‐b]indole Derivatives via Silver(I)‐Mediated [3+2] Cycloaddition

A robust one‐pot process has been developed for the synthesis of a variety of furo[3,2‐b]indoles from readily available o‐propargylaminoacetophenones via silver(I)‐mediated [3+2] cycloaddition.     

Synthesis and characterization of new cardo poly(ether imide)s derived from 9,9‐bis [4‐(4‐aminophenoxy)phenyl]xanthene

A series of new cardo poly(ether imide)s bearing flexible ether and bulky xanthene pendant groups was prepared from 9,9‐bis[4‐(4‐aminophenoxy)phenyl]xanthene with six commercially available aromatic tetracarboxylic dianhydrides in N,N‐dimethylacetamide (DMAc) via the poly(amic acid) precursors and subsequent thermal or chemical imidization. The intermediate poly(amic acid)s had inherent viscosities between 0.83 and 1.28 dL/g, could be cast from DMAc solutions and thermally converted into transparent, flexible, and tough poly(ether imide) films which were further characterized by X‐ray and mechanical analysis. All of the poly(ether imide)s were amorphous and their films exhibited tensile strengths of 89–108 MPa, elongations at break of 7–9%, and initial moduli of 2.12–2.65 GPa. Three poly(ether imide)s derived from 4,4′‐oxydiphthalic anhydride, 4,4′‐sulfonyldiphthalic anhydride, and 2,2‐bis(3,4‐dicarboxyphenyl))hexafluoropropane anhydride, respectively, exhibited excellent solubility in various solvents such as DMAc, N,N‐dimethylformamide, N‐methyl‐2‐pyrrolidinone, pyridine, and even in tetrahydrofuran at room temperature. The resulting poly(ether imide)s with glass transition temperatures between 286 and 335°C had initial decomposition temperatures above 500°C, 10% weight loss temperatures ranging from 551 to 575°C in nitrogen and 547 to 570°C in air, and char yields of 53–64% at 800°C in nitrogen. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012