Synthesis and Characterization of a Thermally and Hydrolytically Stable Energetic Material based on N‐Nitrourea

The novel primary explosive tetranitrodiglycoluril (TNDGU) was synthesized from glycoluril dimer. It was fully characterized by using NMR (¹H, ¹³C), IR spectroscopy, and elemental analysis. X‐ray diffraction revealed that the crystals of TNDGU belong to triclinic system with space group P . The thermal behavior of TNDGU was studied using DSC methods. TNDGU exhibited good thermal stability with a decomposition temperature of 284.8 °C. TNDGU was also more resistant to hydrolysis compared to other nitrourea analogues. Additionally, density, enthalpy of formation, detonation velocity (VOD), and detonation pressure of TNDGU were predicted and it was found that TNDGU is a potential powerful explosive with a calculated density of 1.93 g cm⁻³, a detonation velocity of 8305 m s⁻¹ and low sensitivity to electric discharge.     

几种硝化剂中脲和硝基脲的反应形式(Ⅰ)加料方式的研究

通过改变加料方式来研究脲或硝基脲在硝化剂中与乌洛托品硝解碎片进行缩合反应的形式。采用不同的脲或硝基脲的加料方式时产物RDX酮的得率是不同的。在给定的几种硝化剂中的研究结果表明：先加脲或硝基脲后加乌洛托品的加料方式得到最高得率RDX酮,而后加脲或硝基脲的加料获得RDX酮的得率最低。相同条件下用等摩尔数的硝基脲代替脲时,RDX酮得率较高。由此表明了在生成RDX酮的反应过程中,硝基脲上比脲更为合适的反应形式。     

Synthesis and Characterization of Urea Nitrate and Nitrourea

Urea nitrate (UN) has not found use as a legitimate explosive but is commonly used as an improvised explosive. The dehydration product of UN is nitrourea (NU). Visually both UN and NU are white solids that both melt around 160 °C. Other properties differ markedly as might be expected from an inorganic salt (UN) and an organic molecular compound (NU). An extensive physical characterization of NU and UN is reported. Two reported routes to the NU product are compared and a decomposition mechanism of UN proposed.     

Synthesis,Characterization, and Energetic Properties of N‐Rich Salts of the 4,5‐Dicyano‐2H‐1,2,3‐triazole Anion

The synthesis and characterization of the 4,5‐dicyano‐2H‐1,2,3‐triazole anion in its 5‐aminotetrazole, 1,5‐diaminotetrazole, and 1,5‐diamino‐4‐methyl‐tetrazole salts are reported. All compounds were characterized by IR, ¹H NMR, and ¹³C NMR spectroscopy, as well as elemental analyses. Their thermal decompositions were investigated by TG‐DSC. The densities, combustion heats, and sensitivity properties were tested. Additionally, enthalpies of formation, detonation pressures, detonation velocities, and heats of detonation were calculated. The compounds have potential application in the energetic materials field.     

Blend films of O‐carboxymethyl chitosan and cellulose in N‐methylmorpholine‐N‐oxide monohydrate

To introduce N‐methylmorpholine‐N‐oxide (NMMO) process to prepare antibacterial lyocell fiber, the blend films of O‐carboxymethyl chitosan (O‐CMCS) and cellulose were prepared. O‐CMCS in aqueous suspension with particles having a surface mean diameter of 2.24 μm was blended with cellulose in NMMO hydrate. The blend films with different O‐CMCS content were prepared with the blend solutions. SEM confirmed that O‐CMCS remained within the cellulose film in the particle. The mechanical properties of the blend films show little increased value when O‐CMCS was less 5%; however, it decreased sharply when O‐CMCS was over 8%. Thus, the optimum O‐CMCS content may give a good combination of antibacterial action and mechanical properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4601–4605, 2006     

Poly(styrene‐co‐N‐butylmaleimide) macroinitiators by controlled autopolymerization and related block copolymers

Autopolymerization of styrene‐N‐butylmaleimide mixtures at 125 or 140°C in the presence of a stable nitroxyl radical [2,2,6,6‐tetramethylpiperidin‐1‐yloxyl (TEMPO)] was found to proceed in a pseudoliving manner. Unimolecular initiators, which were originated by trapping self‐generated radical species with TEMPO, took part in the process. Under the studied experimental conditions, the TEMPO‐controlled autopolymerization with a varying comonomer ratio provided virtually alternating copolymers of narrow molecular weight distributions. The molecular weights of the copolymers increased with conversions. The obtained styrene‐N‐butylmaleimide copolymers containing TEMPO end groups were used to initiate the polymerization of styrene. The polymerization yielded poly(styrene‐co‐N‐butylmaleimide)‐polystyrene block copolymers with various polystyrene chain lengths and narrow molecular weight distributions. The compositions, molecular weights, and molecular weight distributions of the synthesized block copolymers and the initial poly(styrene‐co‐N‐butylmaleimide) precursors were evaluated using nitrogen analysis, gel permeation chromatography, and ¹H‐ and ¹³C‐NMR spectroscopy. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2378–2385, 1999     

Synthesis and Surface Active Properties of tri[(N‐alkyl‐N‐ethyl‐N‐Sodium carboxymethyl)‐2‐Ammonium bromide ethylene] Amines

Trimeric betaine surfactants tri[(N‐alkyl‐N‐ethyl‐N‐sodium carboxymethyl)‐2‐ammonium bromide ethylene] amines were prepared with raw materials containing tris(2‐aminoethyl) amine, alkyloyl chloride, lithium aluminium hydride, sodium chloroacetate, and bromoethane by alkylation, Hoffman degradation reaction, carboxymethylation and quaternary amination reaction. The chemical structures of the prepared compounds were confirmed by FTIR, ¹H NMR, MS and elemental analysis. With the increasing length of the carbon chain, the values of their critical micelle concentration initially decreased. Surface active properties of these compounds were superior to general carboxylate surfactants C₁₀H₂₁CHN⁺(CH₃)₂COONa. The minimum cross‐sectional area per surfactant molecule (A_min), standard Gibbs free energy adsorption (ΔG_ads) and standard Gibbs free energy micellization (ΔG_mic) are notably influenced by the chain length n, and the trimeric betaine surfactants have greater ability to adsorb at the air/water interface than form micelles in solution. The efficiency of adsorption at the water/air interface (pC₂₀) of these surfactants increased with the increasing length of the alkyl chain. Their foaming properties, wetting ability of a felt chip, and lime‐soap dispersing ability were also investigated.     

An Energetic N‐Oxide and N‐Amino Heterocycle and its Transformation to 1,2,3,4‐Tetrazine‐1‐oxide

This study reports the preparation of 1‐amino‐1,2,3‐triazole‐3‐oxide (DPX2) and its transformation to 1,2,3,4‐tetrazine‐1‐oxide. DPX‐2 provides insight into a novel N‐oxide/N‐amino high‐nitrogen system, being the first energetic material in this class. The ability of this material to undergo a nitrene insertion forming 1,2,3,4‐tetrazine‐1‐oxide was also studied, and evidence for this material, the first non‐benzoannulated 1,2,3,4‐tetrazine‐1‐oxide, is presented. The existence of both of these materials opens new strategies in energetic materials design. DPX2 was characterized chemically (Infrared, Raman, NMR, X‐ray) and as a high explosive in terms of energetic performances (detonation velocity, pressure, etc.) and sensitivities (impact, friction, electrostatic). DPX‐2 was found to possess good thermal stability and moderate sensitivities, indicating the viability of N‐amino N‐oxides as a strategy for the preparation of new energetic materials.     

Synthesis and flocculation properties of N‐oxide polymers

N‐oxide polymers possess strong zwitterionic character, high solubility in water, and high chelating properties with various cations. In this work, N‐oxide polymers were synthesized following various routes and their solution properties were determined. Molecular properties of the polymers (molecular weight, square root of the mean‐squared radius, and virial coefficients) were related to their chain expansion in solution by determining the intrinsic viscosity as a function of pH. Viscosity results were correlated with the flocculation ability of the polymers for suspending solids removal. These polymers exhibit dramatic conformation changes as the solution pH is varied, especially at low pH values. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2693–2700, 2002     

Synthesis and characterization of fluorocarbon‐modified poly(N‐isopropylacrylamide)

Poly(N‐isopropylacrylamide) copolymers (PNIPAMs) containing pendent perfluoroalkyl (R_F) or dodecyl groups have been synthesized by copolymerization of NIPAM with small amounts of R_R‐acrylates or ‐methacrylates containing a sulfonamido moiety between the acrylate and R_F groups or with dodecyl acrylate. Evidence for strong intermolecular hydrophobic association of the fluorocarbon groups is provided by large viscosity increases with copolymer concentration and upon addition of NaCl and surfactants. These interactions appear to be much stronger than that of the corresponding copolymers of poly(N,N‐dimethylacrylamide) with similar comonomer contents. Hydrophobic association between the R_F groups is found to be much stronger than that of the corresponding dodecyl groups. The viscosity of some of the copolymer solutions, particularly in the presence of perfluorocarbon surfactants, was unusually temperature sensitive, decreasing by a factor of at least 1000 upon increasing the temperature from 10 to 20 °C. This large decrease is most probably related to the collapse of the copolymer coils near the lower critical solution temperature. This is in sharp contrast to the corresponding polyacrylamide or poly(N,N‐dimethylacrylamide) R_F‐acrylate copolymers that show viscosity increases with increasing temperature in the 40–60 °C range. The NIPIAM copolymers were also found to be different from the acrylamide or N,N‐dimethylacrylamide perfluorocarbon acrylate copolymers in that they were found to be Newtonian at a low R_F content but dilatant at a higher comonomer content. © 2000 Society of Chemical Industry     

Microwave‐Assisted Synthesis of N‐Heterocyclic Carbene‐ Palladium(II) Complexes

The microwave‐assisted synthesis of two different types of N‐heterocyclic carbene‐palladium(II) complexes, (NHC)Pd(acac)Cl (NHC=N‐heterocyclic carbene; acac=acetylacetonate) and (NHC)PdCl₂(3‐chloropyridine), has been carried out. A drastic reduction in reaction times (20 to 88 times faster, depending on the complex) was observed when compared to the previously described, conventionally‐heated synthesis of these complexes. The protocol also allowed for the synthesis of (IPr)Pd(acac)Cl [IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene] on a 5‐mmol scale in 30 min, with the reactants loaded in air.     

External Stimuli‐Responsive Characteristics of Ionic Poly[(N,N‐diethylaminoethyl methacrylate)‐co‐(N‐vinyl‐2‐pyrrolidone)] Hydrogels

Summary: Polyelectrolyte hydrogels containing diprotic acid moieties sensitive to ionic strength changes of the swelling medium were synthesized from N,N‐diethylaminoethyl methacrylate (DEAEMA), N‐vinyl‐2‐pyrrolidone (VP) and itaconic acid (IA) by using ammonium persulfate (APS) as a free radical initiator in the presence of the cross‐linker, methylenebisacrylamide (MBAAm). The swelling behavior of the ionic poly[(N,N‐diethylaminoethyl methacrylate)‐co‐(N‐vinyl‐2‐pyrrolidone)] [P(DEAEMA/VP)] hydrogels were investigated in pure water; in NaCI solutions with pH 4 and 9; and in water‐acetone mixtures depending on the IA content in the hydrogel. The average molecular mass between cross‐links ( ) and polymer‐solvent interaction parameter (χ) of the hydrogels were determined from equilibrium swelling values. The pulsatile swelling behavior was also observed in response to solvent changes between the solution in water and in acetone. The equilibrium swelling ratio of these hydrogels was basically unaffected with change in temperature. The swelling variations were explained according to the swelling theory based on the hydrogel chemical structure.

Pulsatile swelling behavior of ionic P(DEAEMA/VP) hydrogels in response to solvent changes between water and acetone at 25 °C.     

Synthesis,characterization and properties evaluation of copolymers of 2,3,4,5,6‐pentafluorostyrene and N‐phenylmaleimide

Copolymers of 2,3,4,5,6‐pentafluorostyrene (PFS) having a combination of high hydrophobicity and high glass transition temperature (T_g) are reported here for the first time. The copolymerization was carried out using N‐phenylmaleimide (NPM) as the comonomer and azobisisobutyronitrile (AIBN) as the initiator under both conventional thermal heating and microwave heating. The initial copolymerization rate was found to be higher under microwave heating than under thermal heating. The copolymerization parameters were determined using the Fineman–Ross method and were found to be r₁ (NPM) = 0.28 and r₂ (PFS) = 0.86. Increased incorporation of NPM in the copolymers led to an increase in T_g of the copolymers without significantly affecting the hydrophobicity of poly(2,3,4,5,6‐pentafluorostyrene). Thermal stability of the copolymers is also reported. Copyright © 2005 Society of Chemical Industry     

Physical agglomeration behavior in preparation of cellulose‐N‐methyl morpholine N‐oxide hydrate solutions by simple mixing

The different melting temperatures of N‐methyl morpholine N‐oxide (NMMO) hydrates in the cellulose–NMMO hydrate solution may be explained by the rather different crystal structures of NMMO hydrates, which are determined by the amount of the hydrates. The preparative process of cellulose–NMMO hydrate solution may result in cellulose structural change from cellulose I to cellulose II, depending on the amount of the hydrate. Mixtures of cellulose and NMMO hydrate in a blender was changed from the granules to slurry with increasing mixing time at 60–70°C, which is below the melting point of the NMMO hydrate. In the case of 15 wt % cellulose–NMMO hydrate granules, which were made by mixing for 20 min, the melting points of various NMMO hydrates were obtained as 77.8°C (n = 0.83), 70.2°C (n = 0.97), and 69.7°C (n = 1.23), respectively, depending on the hydrate number. However, the melting points of cellulose–NMMO hydrate slurry and solution were shifted lower than those of cellulose granules, while the mixing time of slurry and solution are 25 and 35 min, respectively. These melting behaviors indicate instantaneous liquefaction of the NMMO hydrate and the diffusion of the NMMO hydrate into cellulose during mixing in a blender. When cellulose was completely dissolved in NMMO hydrate, the crystal structure of cellulose showed only cellulose II structure. In the cellulose–NMMO products of granules or slurry obtained by high‐speed mixing, which is a new preparation method, they still retained the original cellulose I structure. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1687–1697, 2004     

Synthesis and Properties of N‐Alkyl–N,N‐Dimethyl‐N‐(o‐Hydroxymethyl)Benzylammonium Chlorides

A series of N‐alkyl–N,N‐dimethyl‐N‐(o‐hydroxymethyl)benzylammonium chlorides surfactants (DHBA‐m) were synthesized using o‐chloromethylbenzyl alcohol and N‐alkyl–N,N‐dimethyl tertiary amine as raw materials. The structure of the products was confirmed by FT‐IR, ¹H NMR, ¹³C NMR and MS. DHBA‐m surfactants exhibit low Krafft points and high surface activities. The process of micellization of DHBA‐m is spontaneous, exothermic, and entropy‐driven. The hydroxymethyl substitution increases hydrophobicity of DHBA‐m, thus making micellization more favorable compared with that of N‐dodecyl–N,N‐dimethyl‐N‐benzylammonium chlorides (DDBAC‐m). The bactericidal activity of DHBA‐m is stronger on E. coli than that of DDBAC‐12, and DHBA‐16 shows strong bactericidal activity on Salmonella, S. aureus, and Streptococcus.     

Synthesis and Characterization of 4,4′,5,5′‐Tetranitro‐2,2′‐Bi‐1H‐imidazole (TNBI)

We synthesized 4,4′,5,5′‐tetranitro‐2,2′‐bi‐1H‐imidazole (TNBI), which may serve as a new energetic filler for high explosive formulations. TNBI was synthesized by treating an excess amount of sodium nitrate with 2,2′‐bi‐1H‐imidazole (BI), which was produced from glyoxal and ammonia gas. The overall synthetic yield was 32%. The synthesized TNBI was characterized by performing various chemical analyses including NMR, IR, and CHN analyses. Small scale sensitivity tests were carried out at both research institutes (ADD and ARDEC). The sensitivity results varied from ‘more sensitive than RDX’ to ‘substantially less sensitive than RDX’ according to the purity and conditions of the test samples. Based on our careful characterizations, this large variation in sensitivity was attributed to the moisture content that was present in the test samples due to a hygroscopic nature of TNBI. We also found that the hygroscopic nature of TNBI changed significantly due to the amount of impurities, especially sulfates.     

A Study on CO2 Absorption Kinetics by Aqueous Solutions of N,N‐Diethylethanolamine and N‐Ethylethanolamine

N‐Ethylethanolamine (EEA) and N,N‐diethylethanolamine (DEEA) represent promising candidate alkanolamines for CO₂ removal from gaseous streams, as they can be prepared from renewable resources. In this work, the reaction rate constant for the reaction between CO₂ and EEA was determined from the absorption rate measurements of CO₂ in a blend comprising DEEA, EEA and H₂O. A stirred‐cell reactor with a plane, horizontal gas‐liquid interface was used for the absorption studies. While the DEEA concentration in the formulated solution was varied in the range of 1.5–2.5 kmol/m³, the initial EEA concentration was 0.1 kmol/m³. A zwitterion mechanism for EEA and a base‐catalyzed hydration mechanism for DEEA were used to describe the reaction kinetics. At 303 K, the second‐order reaction rate constant for the CO₂ reaction with EEA was found to be 8041 m³/(kmol s). The liquid‐side mass transfer coefficient was also estimated, and its value (0.004 cm/s) is in line with those typical of stirred‐cell reactors.     

Synthesis and characterization of α‐butyl‐ω‐N,N‐dihydroxyethylaminopropylpolydimethylsiloxane

α‐Butyl‐ω‐N,N‐dihydroxyethylaminopropylpolydimethylsiloxane, a monotelechelic polydimethylsiloxane with a diol‐end group, which is used to prepare polyurethane–polysiloxane graft polymer, was successfully synthesized. The preparation included five steps, which are hydroxyl protection, alkylation, anionic ring‐opening polymerization, hydrosilylation, and deprotection. The products were characterized by FTIR, GC, LC‐MS, ¹H NMR, and elemental analysis. The results showed that each step was successfully carried out and the targeted products were synthesized in all cases. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of α‐butyl‐omega‐{3‐[2‐hydroxy‐3‐(N‐methyl‐N‐hydroxy‐ ethylamino)propoxy]propyl}polydimethylsiloxane

A novel synthesis path for the monotelechelic polydimethylsiloxane with a diol‐end group, α‐butyl‐omega‐{3‐[2‐hydroxy‐3‐(N‐methyl‐N‐hydroxyethylamino)propoxy]propyl}polydimethylsiloxane, is described in this article. The preparation included three steps, which were anionic ring‐opening polymerization, hydrosilylation, and epoxy addition. The structure and polydispersity index of the products were analyzed and confirmed by FTIR, ¹H NMR, ¹³C NMR, H? H, and C? H. Correlated Spectroscopy and gel permeation chromatography. The results demonstrated that each step was successfully carried out and the targeted products were accessed in all cases. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Stimuli sensitive copolymer poly(N‐tert‐butylacrylamide‐ran‐acrylamide): Synthesis and characterization

Temperature sensitive random linear and crosslinked copolymers of N‐tert‐butylacrylamide (NTBA) and acrylamide (Am) were synthesized by the solution polymerization method, using regulated dosing of comonomer Am having a higher reactivity ratio (r_Am = 1.5) than NTBA (r_NTBA = 0.5). Copolymers with varying feed ratios of NTBA and Am (80 : 20 to 20 : 80 mol %) were synthesized and characterized. For the synthesis of copolymer hydrogels, N′, N‐methylene bisacrylamide (MBA) (1.13 mol %) was used along with monomers. The effect of composition on transition properties was evaluated for the linear copolymers and their hydrogels. A definite trend was observed. The incorporation of a higher percentage of the hydrophilic comonomer Am in the structure resulted in the shifting of the transition temperature towards a higher value. The transition temperatures of the copolymers synthesized with feed compositions of 80 : 20, 70 : 30, 60 : 40, 50 : 50, 40 : 60, 30 : 70, and 20 : 80 mol % were found to be 2, 10, 19, 27, 37, 45, and 58°C, respectively. Differential scanning calorimetry (DSC) studies confirmed the formation of random copolymers. The copolymers synthesized with a monomer feed ratio of 50 : 50 with regulated dosing showed a single glass transition temperature (T_g) at 168°C, while the copolymer synthesized with full dosing of Am at the beginning of the reaction showed two T_gs, at 134 and 189°C. The copolymer samples were analyzed by Fourier transform infrared spectroscopy (FTIR) for ascertaining the composition. The composition of the copolymers followed the trend of the feed ratio, but the incorporation of NTBA in the copolymers was found to be lower than the feed ratio because of lower than quantitative yields of the reactions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 672–680, 2005