Computed Thermodynamic and Explosive Properties of 1‐Azido‐2‐nitro‐2‐azapropane (ANAP)

Some thermodynamic and explosive properties of the recently reported 1‐azido‐2‐nitro‐2‐azapropane (ANAP) have been determined in a combined computational ab initio (MP2/aug‐cc‐pVDZ) and EXPLO5 (Becker–Kistiakowsky–Wilson's equation of state, BKW EOS) study. The enthalpy of formation of ANAP in the liquid phase was calculated to be Δ_fH°, ANAP(l)=+297.1 kJ mol⁻¹. The heat of detonation (Q_v), the detonation pressure (P), and the detonation velocity of ANAP were calculated to be Q_v=−6088 kJ kg⁻¹, P=23.8 GPa, D=8033 m s⁻¹. A mixture of ANAP and tetranitromethane (TNM) was investigated in an attempt to tailor the impact sensitivity of ANAP, but results obtained indicate that the mixture is almost as sensitive as pure ANAP. On the other hand, ANAP and TNM were found to be chemically compatible (¹H, ¹³C, ¹⁴N NMR; DSC) and a 1 : 1 mixture (by weight) of both components was calculated to have superior explosive properties than either of the individual components: Q_v=−6848 kJ kg⁻¹, P=27.0 GPa, D=8284 m s⁻¹.     

The Synthesis of Energetic Compound on 4,4′‐((2,4,6‐trinitro‐1,3‐phenylene)bis(oxy)) bis(1,3‐dinitrobenzene)(ZXC‐5): Thermally Stable Explosive with Outstanding Properties

The novel, thermally stable explosive 4,4′‐((2,4,6‐trinitro‐1,3‐phenylene)bis(oxy))bis(1,3‐dinitrobenzene) (Be referred to as ZXC‐ 5 in our laboratory) has been reported. ZXC‐5 can be synthesized by a simple synthetic method (The total synthesis of ZXC‐ 5 requires only two steps and the total yield of ZXC‐ 5 is more than 89 %) and shows the superior detonation performances (detonation pressure, detonation velocity, sensitivity toward mechanical stimuli, and temperature of decomposition). The structure of ZXC‐5 was characterized by multinuclear (¹H, ¹³C) NMR and mass spectrometry. The structure in the crystalline state was confirmed by low‐temperature single‐crystal X‐ray diffraction. From the calculated standard molar enthalpy of formation and the measured densities, the detonation properties were predicted by using the EXPLO5 V6.01 thermochemical computer code. The sensitivity of ZXC‐ 5 towards impact, electrostatic discharge, and friction were also measured.     

A DFT Study on the Structures and Energies of Isomers of 4‐Amino‐1,3‐dinitro‐1,2,4‐triazol‐5‐one‐2‐oxide: New High Energy Density Compounds

Isomers of 4‐amino‐1,3‐dinitrotriazol‐5‐one‐2‐oxide (ADNTONO) are of interest in the contest of insensitive explosives and were found to have true local energy minima at the DFT‐B3LYP/aug‐cc‐pVDZ level. The optimized structures, vibrational frequencies and thermodynamic values for triazol‐5‐one N‐oxides were obtained in their ground state. Kamlet‐Jacob equations were used to evaluate the performance properties. The detonation properties of ADNTONO (D=10.15 to 10.46 km s⁻¹, P=50.86 to 54.25 GPa) are higher compared with those of 1,1‐diamino‐2,2‐dinitroethylene (D=8.87 km s⁻¹, P=32.75 GPa), 5‐nitro‐1,2,4‐triazol‐3‐one (D=8.56 km s⁻¹, P=31.12 GPa), 1,2,4,5‐tetrazine‐3,6‐diamine‐1,4‐dioxide (D=8.78 km s⁻¹, P=31.0 GPa), 1‐amino‐3,4,5‐trinitropyrazole (D=9.31 km s⁻¹, P=40.13 GPa), 4,4′‐dinitro‐3,3′‐bifurazan (D=8.80 km s⁻¹, P=35.60 GPa) and 3,4‐bis(3‐nitrofurazan‐4‐yl)furoxan (D=9.25 km s⁻¹, P=39.54 GPa). The  NH₂ group(s) appears to be particularly promising area for investigation since it may lead to two desirable consequences of higher stability (insensitivity), higher density, and thus detonation velocity and pressure.     

Quantum Chemical Studies on the Structure and Performance Properties of 1,3,4,5‐Tetranitropyrazole: A Stable New High Energy Density Molecule

Molecular orbital calculations were performed for the geometric and electronic structures, band gap, thermodynamic properties, density, detonation velocity, detonation pressure, stability and sensitivity of 1,3,4,5‐tetranitropyrazole ( R23 ). The calculated density (approx. 2060 kg m⁻³), detonation velocity (approx. 9.242 km s⁻¹) and detonation pressure (approx. 41.30 GPa) of the model compound are appearing to be promising compared to hexahydro‐1,3,5‐trinito‐1,3,5‐triazine (RDX) and octahydro‐1,3,5,7‐tetranitro‐l,3,5,7‐tetrazocine (HMX). Bader’s atoms‐in‐molecules (AIM) analysis was also performed to understand the nature of the intramolecular N ⋅⋅⋅ O interactions and the strength of trigger X NO₂ bonds (where XC, N) of the optimized structure computed from the B3LYP/aug‐cc‐pVDZ level.     

Triazidotrinitro Benzene: 1,3,5‐(N3)3‐2,4,6‐(NO2)3C6

Triazidotrinitro benzene, 1,3,5‐(N₃)₃‐2,4,6‐(NO₂)₃C₆ ( 1 ) was synthesized by nitration of triazidodinitro benzene, 1,3,5‐(N₃)₃‐2,4‐(NO₂)₂C₆H with either a mixture of fuming nitric and concentrated sulfuric acid (HNO₃/H₂SO₄) or with N₂O₅. Crystals were obtained by the slow evaporation of an acetone/acetic acid mixture at room temperature over a period of 2 weeks and characterized by single crystal X‐ray diffraction: monoclinic, P 2₁/c (no. 14), a=0.54256(4), b=1.8552(1), c=1.2129(1) nm, β=94.91(1)°, V=1.2163(2) nm³, Z=4, ϱ=1.836 g⋅cm⁻³, R_all =0.069. Triazidotrinitro benzene has a remarkably high density (1.84 g⋅cm⁻³). The standard heat of formation of compound 1 was computed at B3LYP/6‐31G(d, p) level of theory to be ΔH°_f=765.8 kJ⋅mol⁻¹ which translates to 2278.0 kJ⋅kg⁻¹. The expected detonation properties of compound 1 were calculated using the semi‐empirical equations suggested by Kamlet and Jacobs: detonation pressure, P=18.4 GPa and detonation velocity, D=8100 m⋅s⁻¹.     

Synthesis,Characterization, and Energetic Properties of N‐Rich Salts of the 4,5‐Dicyano‐2H‐1,2,3‐triazole Anion

The synthesis and characterization of the 4,5‐dicyano‐2H‐1,2,3‐triazole anion in its 5‐aminotetrazole, 1,5‐diaminotetrazole, and 1,5‐diamino‐4‐methyl‐tetrazole salts are reported. All compounds were characterized by IR, ¹H NMR, and ¹³C NMR spectroscopy, as well as elemental analyses. Their thermal decompositions were investigated by TG‐DSC. The densities, combustion heats, and sensitivity properties were tested. Additionally, enthalpies of formation, detonation pressures, detonation velocities, and heats of detonation were calculated. The compounds have potential application in the energetic materials field.     

Theoretical Investigation of Several 1,2,3,4‐Tetrazine‐Based High‐Energy Compounds

The enthalpies of formation of six 1,2,3,4‐tetrazine‐based compounds were calculated according to the Density Functional Theory BOP/TNP method and by using homodesmotic reaction designs. Their detonation performances, including detonation velocity and pressure, were predicted in terms of the Stine equations. The 1,2,3,4‐Tetrazine‐based compounds labeled A, B, C, D, and F are powerful high‐energy compounds. The detonation performances of A and B, including detonation velocity, and detonation pressure, are superior to that of the current high‐energy explosive CL‐20. The detonation velocity, detonation pressure, and oxygen balance of 1,2,3,4‐tetrazine related oxo derivatives can be improved by partial oxidation of the nitrogen atoms in the tetrazine ring, but further oxidation causes reduction of the enthalpies and specific impulses of the oxo derivatives. Calculation of the molecular resonance energies indicated that E [C₆N₁₂] and F have more negative values, i.e, the ring strain energies of their configurations are high, whereas the resonance energies of C and D are low, only compound B has a very positive resonance energy. Considering energy and stability, B is a promising compound for practical use with both high energy and low sensitivity.     

A Novel Insensitive High Explosive 3,4‐Bis (Aminofurazano) Furoxan

A novel insensitive high explosive 3,4‐bis (aminofurazano) furoxan (BAFF) was prepared using 3‐amino‐4‐acylchloroximinofurazan (ACOF) as a precursor. The molecular and crystal structures of BAFF were characterized by IR, MS, ¹H NMR, ¹³C NMR, elemental analysis, and single crystal X‐ray diffraction. The single crystal structure of BAFF recrystallized from water is monoclinic, space group P 21/c, and ρ_c=1.745 g cm⁻³, and that recrystallized from ethanol is triclinic, space group P 1, and ρ_c=1.737 g cm⁻³. BAFF has multiple crystal forms. The calculated detonation velocity by BKW code is 8100 m s⁻¹ (ρ=1.795 g cm⁻³, theoretical density calculated by quantum chemistry) and the experimental value is 7177 m s⁻¹ (ρ=1.530 g cm⁻³, charge density). The tested values of impact, friction, and electrostatic spark sensitivity show that BAFF is insensitive.     

Synthesis and Characterization of 1‐Nitroguanyl‐3‐nitro‐5‐amino‐1,2,4‐triazole

The synthesis of 1‐nitroguanyl‐3‐nitro‐5‐amino‐1,2,4‐triazole (ANTA‐NQ) ( 1 ) with good yield and high purity is described. DSC analysis showed that the material displays good thermal stability. An X‐ray crystallographic analysis confirms the structure of this material, as well as displays intramolecular hydrogen bonding. A gas pycnometry density for this material was measured to be 1.79 g cm⁻³. The heat of formation of this material was also measured. These data, along with the molecular formula were used as inputs to calculate the detonation velocity and detonation pressure using the Cheetah thermochemical code. The sensitivity of this material towards impact, spark and friction was also measured, as well as its vacuum thermal stability. The 3‐azido derivative 2 was also prepared and its properties are described as well. The above data show that (ANTA‐NQ) may be a high performing material with low sensitivity and good thermal stability.     

Structural and Preliminary Explosive Property Characterizations of New 3,4,5‐Triamino‐1,2,4‐triazolium (Guanazinium) Salts

Two new highly stable energetic salts were synthesized in reasonable yield by using the high nitrogen‐content heterocycle 3,4,5‐triamino‐1,2,4‐triazole and resulting in its picrate and azotetrazolate salts. 3,4,5‐Triamino‐1,2,4‐triazolium picrate (1) and bis(3,4,5‐triamino‐1,2,4‐triazolium) 5,5′‐azotetrazolate (2) were characterized analytically and spectroscopically. X‐ray diffraction studies revealed that protonation takes place on the nitrogen N1 (crystallographically labelled as N2). The sensitivity of the compounds to shock and friction was also determined by standard BAM tests revealing a low sensitivity for both. B3LYP/6–31G(d, p) density functional (DFT) calculations were carried out to determine the enthalpy of combustion (Δ_cH (1) =−3737.8 kJ mol⁻¹, Δ_cH (2) =−4577.8 kJ mol⁻¹) and the standard enthalpy of formation (Δ_fH° (1) =−498.3 kJ mol⁻¹, (Δ_fH° (2) =+524.2 kJ mol⁻¹). The detonation pressures (P (1) =189×10⁸ Pa, P (2) =199×10⁸ Pa) and detonation velocities (D (1) =7015 m s⁻¹, D (2) =7683 m s⁻¹) were calculated using the program EXPLO5.     

An Ab Initio Theoretical Study of 2,4,6‐Trinitro‐1,3,5‐Triazine, 3,6‐Dinitro‐1,2,4,5‐Tetrazine,and 2,5,8‐Trinitro‐Tri‐s‐Triazine

In order to evaluate 2,4,6‐trinitro‐1,3,5‐triazine (TNTAz), 3,6‐dinitro‐1,2,4,5‐tetrazine (DNTAz), and 2,5,8‐trinitro‐tri‐s‐triazine (TNTsTAz), the geometries of these compounds have been fully optimized employing the B3LYP density functional method and the AUG‐cc‐pVDZ basis set. The accurate gas phase enthalpies of formation have been obtained by using the atomization procedure and designing isodesmic reactions in which the parent rings are not destroyed. Based on B3LYP/AUG‐cc‐pVDZ calculated geometries and natural charges, the crystal structures have been predicted using the Karfunkel–Gdanitz method. Computed results show that there exists extended conjugation over the parent rings of these compounds. More energy content is reserved in DNTAz than in both TNTAz and TNTsTAz. The title compounds are much more sensitive than 1,3,5‐trinitrobenzene. The calculated detonation velocity of DNTAz reaches 9.73–9.88 km s⁻¹, being larger than those of CL‐20 and TNTAz. TNTsTAz has no advantage over the widely used energetic compounds such as RDX and HMX.     

Preparation,Crystal Structure and Explosive Properties of Copper(II) Perchlorate Complex with 4‐Amino‐1,2,4‐Triazole and Water

A complex from copper(II) perchlorate with 4‐amino‐1,2,4‐triazole (4‐AT, C₂H₄N₄) was synthesized, and elemental composition, molecular structure, and explosive properties were determined. To this end, elemental and X‐ray analyses were carried out, sensitivity to mechanical and thermal stimuli was measured, mechanism of thermal decomposition was investigated, and kinetic parameters of decomposition were determined. In the next step measurements of heat of combustion and detonation velocity were performed. Detonation parameters were also calculated. It was stated that the complex has slightly distorted square bipyramidal (4+2) coordination. The four basal bonds are formed by nitrogen atoms of four 4‐AT molecules. The coordination of the metal is completed by two axial oxygen atoms, one of the perchlorate ion, and one of the water molecule. With respect to explosive properties, tetrakis(4‐AT)copper(II) perchlorate monohydrate belongs to the group of sensitive secondary explosives.     

Synergistic extraction of rare earths(III) from chloride medium with mixtures of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate

The synergistic effect of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 (HPMBP, HA) and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate (DEHEHP, B) in the extraction of rare earths (RE) from chloride solutions has been investigated. Under the experimental conditions used, there was no detectable extraction when DEHEHP was used as a single extractant while the amount of RE(III) extracted by HPMBP alone was also low. But mixtures of the two extractants at a certain ratio had very high extractability for all the RE(III). For example, the synergistic enhancement coefficient was calculated to be 9.35 for Y³⁺, and taking Yb³⁺ and Y³⁺ as examples, RE³⁺ is extracted as RE(OH)A₂.B. The stoichiometry, extraction constants and thermodynamic functions such as Gibbs free energy change ΔG (?17.06 kJ mol^?1), enthalpy change ΔH (?35.08 kJ mol^?1) and entropy change ΔS (?60.47 J K^?1 mol^?1) for Y³⁺ at 298 K were determined. The separation factors (SF) for adjacent pairs of rare earths were calculated. Studies show that the binary extraction system not only enhances the extraction efficiency of RE(III) but also improves the selectivity, especially between La(III) and the other rare earth elements. Copyright © 2006 Society of Chemical Industry     

Synthesis and Characterization of a New Class of Energetic Compounds – Ammonium Nitriminotetrazolates

1‐Methyl‐5‐nitriminotetrazole ( 1 ) and 2‐methyl‐5‐nitraminotetrazole ( 2 ) obtained by nitration of 1‐methyl‐5‐aminotetrazole ( 3 ) and 2‐methyl‐5‐aminotetrazole ( 4 ) were deprotonated using aqueous ammonia solution yielding the energetic compounds, ammonium 1‐methyl‐5‐nitriminotetrazolate ( 5 ) and ammonium 2‐methyl‐5‐nitriminotetrazolate ( 6 ). The nitrogen‐rich salts were tested and characterized comprehensively using vibrational spectroscopy (Infrared (IR) and Raman), multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, and elemental analysis. The molecular structures in the crystalline state were determined using low temperature single crystal X‐ray diffraction. The thermal behavior and the decompositions were investigated using differential scanning calorimetry (DSC) and gas IR spectroscopy. The heats of formation were calculated using bomb calorimetric measurements. In addition, the relevant detonation parameters, like the detonation pressure and velocity of detonation were calculated using the software EXPLO5 outperforming the values of TNT. Last but not least the sensitivities were determined using BAM methods showing moderate values against impact and friction (drophammer and friction tester) and the long‐term stabilities were tested using Flexy Thermal safety calorimetry (TSC). X‐ray crystallography: 5 : monoclinic, P2₁/c, a=370.06(2) pm, b=2079.06(9) pm, c=859.69(5) pm, β=99.120(5)°, V=65306(6) pm³, Z=4, ρ_calc=1.639 g cm⁻³; 6 : monoclinic, P2₁, a=365.39(2) pm, b= 788.82(5) pm, c=1124.95(7) pm, β=91.818(6), V=32408(3) pm³, Z=2, ρ_calc=1.651 g cm⁻³.     

Improved Synthesis and X‐Ray Structure of 5‐Aminotetrazolium Nitrate

5‐Aminotetrazolium nitrate was synthesized in high yield and characterized using Raman and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁵N). The molecular structure of 5‐aminotetrazolium nitrate in the crystalline state was determined by X‐ray crystallography: monoclinic, P 2₁/c, a=1.05493(8) nm, b=0.34556(4) nm, c=1.4606(1) nm, β=90.548(9)°, V=0.53244(8) nm³, Z=4, ϱ=1.847 g cm⁻³, R₁=0.034, wR₂ (all data)=0.090. The thermal stability of 5‐aminotetrazolium nitrate was determined using differential scanning calorimetry; the compound decomposes at 167 °C. The enthalpy of combustion (Δ_combH) of 5‐aminotetrazolium nitrate ([CH₄N₅]⁺[NO₃]⁻) was determined experimentally using oxygen bomb calorimetry: Δ_combH([CH₄N₅]⁺[NO₃]⁻)=−6020±200 kJ kg⁻¹. The standard enthalpy of formation (Δ_fH°) of [CH₄N₅]⁺[NO₃]⁻ was obtained on the basis of quantum chemical computations at the electron‐correlated ab initio MP2 (second order Møller‐Plesset perturbation theory) level of theory using a correlation consistent double‐zeta basis set (cc‐pVTZ): Δ_fH°([CH₄N₅]⁺[NO₃]⁻(s))=+87 kJ mol⁻¹=+586 kJ kg⁻¹. The detonation velocity (D) and the detonation pressure (P) of 5‐aminotetrazolium nitrate were calculated using the empirical equations by Kamlet and Jacobs: D([CH₄N₅]⁺[NO₃]⁻)=8.90 mm μs⁻¹ and P([CH₄N₅]⁺[NO₃]⁻)=35.7 GPa.     

Synthesis and Characteristics of Bis(nitrofurazano)furazan (BNFF), an Insensitive Material with High Energy‐Density

The insensitive compound bis(nitrofurazano)furazan (BNFF) with high energy‐density was synthesized by three‐step reactions and fully characterized. The key reduction reaction was discussed. BNFF has a high crystal density (1.839 g cm⁻³) and a low melting point (82.6 °C). BNFF is insensitive to impact and friction and has similar detonation velocity (8680 m s⁻¹) and detonation pressure (36.1 GPa) compared to RDX.     

Theoretical Studies on Molecular and Explosive Properties of 4,4′,5,5′‐Tetranitro‐2,2′‐bi‐1H‐imidazole (TNBI)

We performed theoretical studies to predict the molecular structure, molecular properties, and explosive performance of 4,4′,5,5′‐tetranitro‐2,2′‐bi‐1H‐imidazole (TNBI). High levels of ab initio and density functional theories were employed to predict the molecular structure of TNBI. Predicted TNBI structure was in good agreement with that observed by X‐ray crystallography. Heat of formation in the solid phase at 298 K was predicted to be 270.3 kJ/mol. Density of TNBI was predicted to be 1.919–1.956 g/cm³ depending upon the parameter sets of group additivity method. By using these values as input data, we estimated detonation velocity and C–J pressure to be 8.69–8.80 km/s and 34.5‐36.1 GPa, respectively. Impact sensitivity of TNBI was predicted to be 33 cm.     

Structural and Thermal Characterization of A Novel High Nitrogen Energetic Material: (NH4)2DNMT

1,4‐Dihydro‐5H‐(dinitromethylene)‐tetrazole ammonium salt ((NH₄)₂DNMT), a high nitrogen energetic compound, was synthesized and structurally characterized by single‐crystal X‐ray diffraction. The thermal behavior of (NH₄)₂DNMT was studied with DSC and TG‐DTG methods. The kinetic equation of the thermal decomposition reaction is: dα/dT=10^13.17/3β(1−α)⁻² exp(−1.388×10⁵/RT). The critical temperature of thermal explosion is 182.7 °C. The specific heat capacity of (NH₄)₂DNMT was determined and the molar heat capacity is 301 J mol⁻¹ K⁻¹ at 298.15 K. The adiabatic time‐to‐explosion of (NH₄)₂DNMT was calculated to be 277 s. The detonation velocity and detonation pressure were also estimated. All results showed that (NH₄)₂DNMT presents good performance.     

Theoretical Calculation and Molecular Design for High Explosives: Theoretical Study on Polynitropyrazines and Their N‐oxides

The geometries of polynitropyrazines and their N‐oxides have been fully optimized employing the density functional B3LYP method and the 6‐31++G** basis set. For polynitropyrazines and their N‐oxides we have obtained the enthalpies of formation (at p=1.013×10⁵ Pa and T=298.15 K) by designing isodesmic reactions and the detonation velocities by using the Stine method. Calculated results show that the aromaticity of the pyrazine ring of polynitropyrazine is lower than that of its N‐oxide. From the acquired relationship between the experimental impact sensitivity H₅₀ (12B type) and the least C NO₂ bond order the predicted H₅₀ values for compounds 2,5‐diamino‐3,6‐dinitropyrazine and 2,5‐diamino‐3,6‐dinitropyrazine‐1‐oxide are 83 cm and 59 cm, respectively, implying that they are low sensitive explosives. The enthalpy of formation of polynitropyrazine is much less than that of its N‐oxide. The calculated density (1.90 g/cm³) for 2,6‐diamino‐3,5‐dinitropyrazine‐1‐oxide (LLM‐105) is close to the experimental value (1.918 g/cm³), and from both sensitivity and detonation velocity it has been deduced that LLM‐105 is superior to other diaminodinitropyrazines and their N‐oxides. The largest density and detonation velocity obtained in this work are 2.02 g/cm³ (2‐amino‐3,5,6‐trinitropyrazine) and 9.34 km/s (2,3,5,6‐tetranitropyrazine), respectively.     

The Insensitive Energetic Material Trifurazano‐oxacycloheptatriene (TFO): Synthesis and Detonation Properties

The high‐energy insensitive compound trifurazano‐oxacycloheptatriene (TFO) was first by synthesized through special etherification. The reaction mechanism and reaction conditions were discussed. TFO has a low melting point (78.6 °C) and good compatibility. TFO is insensitive to impact and friction and has similar detonation velocity (7.7 km s⁻¹) and detonation pressure (35.6 GPa) to RDX.