Study of Some Low Temperature Gas‐Generating Compositions

Some low temperature gas‐generating compositions, comprised of guanidine nitrate (GN), basic cupric nitrate (BCN), and ferric oxide (Fe₂O₃), were studied herein. The thermal decomposition properties and burning characteristics of GN/BCN/Fe₂O₃ mixtures were investigated by thermogravimetry/differential scanning calorimetry (TG/DSC), burning temperature measurements, automatic calorimetry, and X‐ray diffraction (XRD). This study showed that the maximum burning temperature of GN/BCN/Fe₂O₃ mixture (613 °C) was 31 % lower than that of GN/BCN mixture and the corresponding heat of combustion (2647 J g⁻¹) decreased by 15 %. When the GN/BCN/Fe₂O₃ mixtures were burning, Fe₂O₃ did not directly react with GN but with Cu (or CuO), which was produced by reaction between GN and BCN. The combustion process of GN/BCN/Fe₂O₃ grains could be divided into four stages: pre‐heated, condensed, combustion, and cooling.     

Effect of Heat on Hollow Multiphase Ceramic Microspheres Prepared by Self‐Reactive Quenching Technology

The self‐reactive quenching technology, which combines flame thermal spraying technology, self‐propagating high‐temperature synthesis (SHS), and rapid solidification, is a new method for preparation of hollow microspheres. Based on this, the effect of heat released by different exothermic systems on preparation of hollow ceramic microspheres was studied. The results show that for low‐exothermic system Si‐Sucrose‐NH₄Cl, the self‐propagating reactions cannot occur, and the quenching products are Si microspheres with porous structure. For the moderate exothermic system Al–SiO₂‐Sucrose, the quenching products consist of some grains, which are hollow spherical or nearly spherical particles and irregular powders. Formation of Al₂O₃–Si indicates possible occurrence of SHS reactions. Meanwhile, for high‐exothermic system Al–Cr₂O₃‐Sucrose‐Si‐Epoxy Resin, the quenching products consist of internal hollow spherical grains and irregular‐shaped porous particles; the phase composition mainly contains Al₂O₃, Cr₃C₂, Cr₇C₃, Cr₃Si, and mullite, showing completeness of SHS reactions. The higher the adiabatic combustion temperature of the system is, the more heat it releases is higher, and the ceramic droplets form easilier.     

Titanium carbide by the SHS process ignited with aluminothermic reaction

We explored the ignition of Ti + C → TiC reaction with another highly exothermic thermite reaction, Fe₂O₃ + 2Al → 2Fe + Al₂O₃, used as a match. In order to decrease the combustion temperature and thus to avoid explosion mode, we studied the effect of alumina diluent on the thermite reaction. In order to ensure the stability of front propagation, we also tested the reactions involving enriched and non-enriched iron ores. The evolution of phase composition, grain size, and density of products during SHS reaction was determined by XRD and IR filming.      

A novel porous‐dense dual‐layer composite membrane reactor with long‐term stability

A porous‐dense dual‐layer composite membrane reactor was proposed. The dual‐layer composite membrane composed of dense 0.5 wt % Nb₂O₅‐doped SrCo_0.8Fe_0.2O_3‐δ (SCFNb) layer and porous Ba_0.3Sr_0.7Fe_0.9Mo_0.1O_3‐δ (BSFM) layer was prepared. The stability of SCFNb membrane reactor was improved significantly by the porous‐dense dual‐layer design philosophy. The porous BSFM surface‐coating layer can effectively reduce the corrosion of the reducing atmosphere to the membrane, whereas the dense SCFNb layer permeated oxygen effectively. Compared with single‐layer dense SCFNb membrane reactor, no degradation of performance was observed in the dual‐layer membrane reactor under partial oxidation of methane during continuously operating for 1500 h at 850°C. At 900°C, oxygen flux of 18.6 mL (STP: Standard Temperature and Pressure) cm^?2 min^?1, hydrogen production of 53.67 mL (STP) cm^?2 min^?1, CH₄ conversion of 99.34% and CO selectivity of about 94% were achieved. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4355–4363, 2013     

Affinity‐tuned peroxidase‐like activity of hydrogel‐supported Fe3O4 nanozyme through alteration of crosslinking concentration

In this work, we evaluated the effect of crosslinking concentration on the affinity of poly (2‐acrylamido‐2‐methyl‐1‐propansulfonic acid) (PAMPS) hydrogel‐supported Fe₃O₄ nanozyme towards substrates (tetramethylbenzidine (TMB) and H₂O₂). The peroxidase‐like catalytic activity of PAMPS/Fe₃O₄ nanozyme was discussed with respect to crosslinking concentration of PAMPS hydrogel for the oxidation of TMB in the presence of H₂O₂ at room temperature. High catalytic activity was achieved due to good dispersion of Fe₃O₄ nanozyme in the hydrogel network and strong affinity of PAMPS hydrogel‐supported Fe₃O₄ nanozyme towards substrates. The affinity between the hydrogel‐supported Fe₃O₄ nanozyme and substrates can be improved by regulating the crosslinking concentration of PAMPS hydrogel without other trenchant experimental conditions. In addition, the result indicated that H₂O₂ can be detected even at a concentration as low as 1.5 × 10^?6 mol L^?1 with a linear detection range of 1.5–9.8 × 10^?6 mol L^?1. Such investigations not only showed a new approach to improve the affinity and peroxidase‐like activity of Fe₃O₄ nanozyme, but also verified its potential application in bio‐detection and environmental chemistry. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43065.     

Chitosan‐Tethered Iron Oxide Composites as an Antisintering Porous Structure for High‐Performance Li‐Ion Battery Anodes

Chitosan‐linked Fe₃O₄ (CL‐Fe₃O₄) is facilely prepared by electrostatic interactions between citrate‐capped Fe₃O₄ (C‐Fe₃O₄) (with negatively charged carboxylate groups) and chitosan oligosaccharide lactate (with positively charged amine groups), and utilized as anodes for lithium‐ion batteries. Inert‐atmosphere calcination of CL‐Fe₃O₄ at 400°C leads to the formation of chitosan‐tethered iron oxide composites (Fe₂O₃@chitosan) with an antisintering porous structure. As the calcination temperature changes from 400°C to 700°C, the size of primary particles increases from ca. 40 nm to ca. 100 nm, and the surface area decreases from 57.8 m²/g to 10.9 m²/g. The iron oxide composites exhibit a high discharge capacity and good rate performance. At a current density of 0.1 C after 50 cycles, Fe₂O₃@chitosan (400°C) exhibits a higher retention capacity of 732 mAh/g than those (544 and 634 mAh/g) of chitosan‐free Fe₂O₃ and Fe₂O₃@chitosan (700°C), respectively. The high performance of Fe₂O₃@chitosan (400°C) is attributed to the antisintering porous structure with high surface area that is beneficial for facilitating ion transport, demonstrating a useful chemical strategy for the direct formation of porous electrode materials at low calcination temperature.     

Highly Insensitive/Reactive Thermite Prepared from Cr2O3 Nanoparticles

Thermites prepared from nanoparticles are currently the subject of growing interest due to their increased performances compared to classical micrometer‐sized thermites. Here, we studied the combustion behavior of energetic composite composed of Al and chromium (III) oxide (Cr₂O₃) as function of the oxide particle size. Homogeneous composites were prepared by mixing Al nanoparticles (Φ≈50 nm) with Cr₂O₃ micro‐ and nanoparticles (Φ≈20 nm), respectively, in hexane solution. The dried Cr₂O₃/Al composite powders were ignited by using a CO₂ laser beam. The use of nanosized Cr₂O₃ particles incontestably improves the energetic performances of the Al/Cr₂O₃ thermite since the ignition delay time was shortened by a factor 3.5 (16±2 vs 54±4 ms) and the combustion rate (340±10 mm s⁻¹) was significantly accelerated in contrast to those reported until now. Interestingly, the sensitivity to friction of the Al‐based thermites formulated from Cr₂O₃ is two orders of magnitude lower than the thermite prepared from other metal oxide nanoparticles (MnO₂, WO₃). Finally, our study shows that the decrease of Cr₂O₃ particle size has an interesting and beneficial effect on the energetic properties of Cr₂O₃/Al thermites and appears as an alternative to tune the properties of these energetic materials.     

Preparation and characterization of spindle-like Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> mesoporous nanoparticles

Magnetic spindle-like Fe₃O₄ mesoporous nanoparticles with a length of 200 nm and diameter of 60 nm were successfully synthesized by reducing the spindle-like α-Fe₂O₃ NPs which were prepared by forced hydrolysis method. The obtained samples were characterized by transmission electron microscopy, powder X-ray diffraction, attenuated total reflection fourier transform infrared spectroscopy, field emission scanning electron microscopy, vibrating sample magnetometer, and nitrogen adsorption-desorption analysis techniques. The results show that α-Fe₂O₃ phase transformed into Fe₃O₄ phase after annealing in hydrogen atmosphere at 350°C. The as-prepared spindle-like Fe₃O₄ mesoporous NPs possess high Brunauer-Emmett-Teller (BET) surface area up to ca. 7.9 m² g^-1. In addition, the Fe₃O₄ NPs present higher saturation magnetization (85.2 emu g^-1) and excellent magnetic response behaviors, which have great potential applications in magnetic separation technology.     

Effect of core-shell reversal on the structural,magnetic and adsorptive properties of Fe2O3-GO nanocomposites

Effect of core-shell reversal on the nanocomposites of graphene oxide (GO) and ferric oxide (Fe₂O₃) was studied. Fe₂O₃@GO core-shell nanosheets were synthesized by sonication method, while the GO@Fe₂O₃ core-shell nanospheres by employing N,N′-dicyclohexylcarbodimide as the binding agent for the wrapping of GO sheets on pre-formed Fe₂O₃ nanoparticles (NPs). The phase composition, crystallinity and morphology of the nanocomposites were characterized by FT-IR, TEM, SEM-EDS, VSM, BET surface area study and XRD techniques. The saturation magnetization (M_s) was 1.25 and 0.51 emu g⁻¹ for GO@Fe₂O₃ and Fe₂O₃@GO respectively owing to the dependence of magnetic properties on the reversal of core-shell. BET analysis revealed the surface area of 100.32 m² g⁻¹ and 45.69 m² g⁻¹ for GO@Fe₂O₃ and Fe₂O₃@GO nanocomposites respectively. The fabricated nanocomposites were analyzed as adsorbents for the uptake of Pb (II) ions. The impact of various factors affecting adsorption process such as pH, adsorbent dose, contact time, temperature and metal ion concentration was also investigated. GO@Fe₂O₃ core-shell nanospheres showed a higher adsorption capacity for Pb (II) ions as compared to Fe₂O₃@GO core-shell nanosheet with the maximum adsorption capacities (q_m) of 303.0 and 125.0 mg g⁻¹ respectively. The equilibrium data was estimated by Freundlich, Langmuir, D-R and Temkin isotherm models. Thermodynamic analysis confirmed the spontaneous and exothermic nature of the adsorption process. The adsorption kinetics was significantly fitted to pseudo-second order model. The results confirmed that core-shell reversal can significantly alter the adsorptive properties of Fe₂O₃-GO nanocomposite     

Nanoenergetic Gas‐Generators: Design and Performance

Nanoenergetic gas‐generator (NGG) mixtures may have various potential military applications from aircraft fuels to rocket propellants, explosives, and primers. To find reactions generating the highest pressure peak, we studied eight nanoenergetic reactions. The Al/Bi₂O₃ reaction generated the highest pressure pulse among the eight thermite reactions. We developed a highly efficient, one step process for synthesis of Bi₂O₃ nanostructured particles. Its use generated about a three times higher peak pressure (∼10 MPa) than when using commercial bismuth oxide nanoparticles (3 MPa). The pressure in the vessel rose very rapidly to a peak value for a duration of ∼0.02 ms and ΔP/Δt of up to 500 GPa s⁻¹. Increasing the crystallinity of the bismuth oxide nanoparticles increased the peak gas pressure by 25%. The maximum pressure×volume (PV) value obtained at m=0.1 g with our synthesized Bi₂O₃ was 707 Pa m³ much higher than that reported in the literature (33 Pa m³) for the same sample mass. Addition of carbon to the reactant mixtures did not increase the peak pressure. Addition of up to 3 wt.‐% of boron to the thermite systems increased the peak pressure by ∼50%.     

Facile synthesis of a novel Fe3O4-rGO-MoO3 ternary nano-composite for high-performance hybrid energy storage applications

Supercapacitors (SCs) have been considered as inspiring energy storage devices due to the long cycle lifetime and high power densities. However, their energy density is limited due to the low capacitance of cathode materials and inferior cycling stability at practically useable potential windows >1.2 V. In this paper, we demonstrate the synthesis of a novel ternary Fe₃O₄-rGO-MoO₃ nano-composite (FGM) with nanoparticles-like morphology (NPs) by utilizing the fast and facile microwave hydrothermal process. The optimized composition of FGM nanocomposite is characterized by the XPS, EDS, Raman, SEM, TEM and HRTEM techniques. The FGM-NPs supported on the carbon cloth (FGM@CC) electrode is used to investigate the electrochemical charge storage properties in basic potassium hydroxide (KOH) electrolyte. The charge-storage properties of the FGM@CC electrode were studied by the CV, GCD and EIS techniques. The obtained results of FGM@CC electrode in aqueous electrolyte showed excellent electrochemical performance as compared with single metal oxides: maximum specific capacitance of 1666.50 F g⁻¹ (FGM@CC), 1075.26 F g⁻¹ (Fe₃O₄ NPs) and 952.38 F g⁻¹ (MoO₃ NPs) at a current density of 2.5 A g⁻¹. The capacitance retention was 95.01% (FGM@CC), 94.1% (Fe₃O₄ NPs) and 92.5% (MoO₃ NPs) after 5000 cycles. Further, the charge storage mechanism is analyzed in the light of power's law and systematical investigated the capacitive and diffusion controlled based stored charge in FGM@CC electrode. Thus FGM nano-composite showed best performance as the cathode material for the next generation flexible supercapacitors.     

Fe3O4 nanoparticles encapsulated in electrospun porous carbon fibers with a compact shell as high-performance anode for lithium ion batteries

Fe₃O₄ nanoparticles encapsulated in porous carbon fibers (Fe₃O₄@PCFs) as anode materials in lithium ion batteries are fabricated by a facile single-nozzle electrospinning technique followed by heat treatment. A mixed solution of polyacrylonitrile (PAN) and polystyrene (PS) containing Fe₃O₄ nanoparticles is utilized to prepare hybrid precursor fibers of Fe₃O₄@PS/PAN. The resulted porous Fe₃O₄/carbon hybrid fibers composed of compact carbon shell and Fe₃O₄-embeded honeycomb-like carbon core are formed due to the thermal decomposition of PS and PAN. The Fe₃O₄@PCF composite demonstrates an initial reversible capacity of 1015 mAh g⁻¹ with 84.4% capacity retention after 80 cycles at a current density of 0.2 A g⁻¹. This electrode also exhibits superior rate capability with current density increasing from 0.1 to 2.0 A g⁻¹, and capacity retention of 91% after 200 cycles at 2.0 A g⁻¹. The exceptionally high performances are attributed to the high electric conductivity and structural stability of the porous carbon fibers with unique structure, which not only buffers the volume change of Fe₃O₄ with the internal space, but also acts as high-efficient transport pathways for ions and electrons. Furthermore, the compact carbon shell can promote the formation of stable solid electrolyte interphase on the fiber surface.     

Synthesis of graphene nanosheets modified with the Fe3O4@ phenol formaldehyde resin or PFR nanoparticles for their application in bio‐imagine and thermal treatment

Two different types of graphene‐based composites have been synthesized with simple assays. The multifunctional composites were obtained through loading Fe₃O₄@phenol formaldehyde resin (PFR) nanoparticles (NPs) synthesized with Fe₃O₄ NPs, hexamethylene‐tetramine, and phenol onto the surface of graphene oxide sheets in the presence of coupling agent. The Fe₃O₄@PFR loaded graphene oxide composites bring several merits. It prevents PFR NPs aggregation due to the existed graphene oxide but also endows the composites photothermal conversion property. Furthermore, the graphene‐wrapped PFR composites were prepared by mixing oxide graphene and PFR NPs at 110 °C by means of the good reduction of the hydroxyl group on the surface of PFR NPs to graphene. Under the assistance of chitosan, a building block consists of graphene‐wrapped PFR composites could be obtained. Thus, an ideal method may be developed to synthesize graphene‐wrapped PFR composites for constructing building blocks. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45007.     

Catalytic Effect of Two Shapes of Nano‐Fe2O3 on Hexanitrohexaazaisowurtzitane Using a Non‐Isothermal Decomposition Kinetic Method

Nanosized Fe₂O₃ particles (nano‐Fe₂O₃) with two shapes (tetrakaidecahedral and grainy) were synthesized by hydrothermal methods. The morphologies and structures were characterized using a combination of experimental techniques including X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Two composites containing CL‐20 (hexanitrohexaazaisowurtzitane, HNIW) and tetrakaidecahedral nano‐Fe₂O₃ [nmT‐Fe₂O₃/CL‐20] or grainy nano‐Fe₂O₃/CL‐20 (nmG‐Fe₂O₃/CL‐20) were prepared. The thermal behaviors of the two composites and pure CL‐20 were investigated using differential scanning calorimetry (DSC). Non‐isothermal decomposition kinetic parameters and the thermal decomposition mechanism of the two composites and CL‐20 were obtained. The apparent activation energy (E_a) of the main thermal decomposition reaction of CL‐20, nmT‐Fe₂O₃/CL‐20 and nmG‐Fe₂O₃/CL‐20 are 181.94, 179.17, and 176.18 kJ mol⁻¹, respectively. The thermal decomposition mechanism of CL‐20 as well as nmT‐Fe₂O₃/CL‐20 was controlled by the Avrami‐Erofeev equation (n=2/5) assumed as random nucleation and subsequent growth, while, the reaction mechanism of the composite nmG‐Fe₂O₃/CL‐20 was controlled by the Mample Power law (n=1/2). The reason for this difference may be due to the different morphology and particle size of the two nano‐Fe₂O₃ particles.     

Evaluation of photovoltaic efficiency of dye‐sensitized solar cells fabricated with electrospun PVDF‐PAN‐Fe2O3 composite membrane

Poly(vinylidene fluoride)‐polyacrylonitrile‐based membranes containing Fe₂O₃ nanoparticles were prepared by electrospinning technique and characterized by HR‐SEM, FTIR, and XRD analysis. The effect of electrolyte in the electrospun nanofibers on electrolyte uptake, ionic conductivity and porosity were studied. The electrospun membranes containing Fe₂O₃ showed an enhanced ionic conductivity than that of without Fe₂O₃. Among the prepared membranes, the membrane with 7 wt % Fe₂O₃ has the highest liquid electrolyte uptake of 562% and ionic conductivity of 6.81 × 10^?2 S cm^?1. The photovoltaic performance for open circuit voltage (V_oc), Short‐circuit current density (J_sc), Fill factor (FF), and η of the DSSC fabricated with 7 wt % Fe₂O₃ are 0.77 V, 10.4 mA/cm², 0.62 and 4.9%, respectively. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41107.     

Tailoring Electrochemical Property of Layered Perovskite Cathode by Cu‐doping for Proton‐Conducting IT‐SOFCs

Layered perovskite oxide YBaCuCoO_5+x (YBCC) was synthesized by an EDTA‐citrate complexation process and was investigated as a novel cathode for proton‐conducting intermediate temperature solid oxide fuel cells (IT‐SOFCs). The thermal expansion coefficient (TEC) of YBCC was 15.3 × 10⁻⁶ K⁻¹ and the electrical conductivity presented a semiconductor‐like behavior with the maximum value of 93.03 Scm⁻¹ at 800 °C. Based on the defect chemistry analysis, the electrical conductivity gradually decreases by the introduction of Cu into Co sites of YBaCo₂O_5+x and the conductor mechanism can transform from the metallic‐like behavior to the semiconductor‐like behavior. Thin proton‐conducting (BaZr_0.1Ce_0.7Y_0.1Yb_0.1O_3–δ) BZCYYb electrolyte and NiO–BZCYYb anode functional layer were prepared over porous anode substrates composed of NiO–BZCYYb by a one‐step dry‐pressing/co‐firing process. Laboratory‐sized quad‐layer cells of NiO‐BZCYYb / NiO‐BZCYYb / BZCYYb / YBCC with a 20 μm‐thick BZCYYb electrolyte membrane exhibited the maximum power density as high as 435 mW cm⁻² with an open‐circuit potential (OCV) of 0.99 V and a low interfacial polarization resistance of 0.151 Ωcm² at 700 °C. The experimental results have indicated that the layered perovskite oxide YBCC can be a cathode candidate for utilization as proton‐conducting IT‐SOFCs.     

A simple route to prepare pomegranate‐like polystyrene‐based microspheres with high porosity

Pomegranate‐like polystyrene‐based microspheres with high porosity were successfully prepared via a simple route involving two steps. The first step was the preparation of polystyrene‐based microspheres with multi‐cores and a non‐porous shell via suspension polymerization of divinylbenzene and vinylbenzyl chloride. Nitrogen sorption failed to characterize the pore structure of the microspheres because of the non‐porous shell, but the results of Hg intrusion indicated that the pore volume of the microspheres was 0.36 cm³ g^?1. The second step was post crosslinking of the microspheres derived from the first step. Extensive porosity was generated in the shell and the pomegranate‐like structure of the microspheres remained almost unchanged. The results showed that the pore volumes of the final products derived from N₂ sorption and Hg intrusion were 0.54 cm³ g^?1 and 0.66 cm³ g^?1, respectively. Overall, this provides a simple and feasible route to biomimetic preparation of pomegranate‐like polystyrene‐based microspheres with high porosity. Copyright © 2011 Society of Chemical Industry     

Anchoring mesoporous Fe3O4 nanospheres onto N-doped carbon nanotubes toward high-performance composite electrodes for supercapacitors

Fe-based oxide electrodes for practical applications in supercapacitors (SCs) suffer from low conductivity and poor structural stability. To settle these issues, we report on the design and synthesis of Fe₃O₄/carbon nanocomposites via firmly anchoring mesoporous Fe₃O₄ nanospheres onto N-doped carbon nanotubes (N-CNTs) via C–O–Fe bonds. Mesoporous Fe₃O₄ nanospheres are featured by rich electroactive sites and short ion diffusion pathways. The N-CNTs, on the other hand, serve as the scaffolds, which not only provide conductive networks but also suppress the accumulation between mesoporous Fe₃O₄ nanospheres as well as alleviate volume changes during charge/discharge cycles. Accordingly, the constructed Fe₃O₄/N-CNTs nanocomposite electrode demonstrates improved specific capacity values of up to 314 C g⁻¹ at 1 A g⁻¹, with 92% retention of the initial capacity after 5000 cycles at 10 A g⁻¹. In addition, the assembled Fe₃O₄/N-CNTs//active carbon (AC) asymmetric supercapacitor (ASC) device possesses an energy density of 25.3 Wh kg⁻¹, suggesting that the prepared Fe₃O₄/N-CNTs nanocomposites are promising electrode materials for use in SCs.     

A novel platform of hemoglobin on core–shell structurally Fe3O4@Au nanoparticles and its direct electrochemistry

A novel platform, which hemoglobin (Hb) was immobilized on core–shell structurally Fe₃O₄/Au nanoparticles (simplified as Fe₃O₄@Au NPs) modified glassy carbon electrode (GCE), has been developed for fabricating the third biosensors. Fe₃O₄@Au NPs, characterized using transmission electron microscope (TEM), scanning electron microscope (SEM) and energy dispersive spectra (EDS), were coated onto GCE mediated by chitosan so as to provide larger surface area for anchoring Hb. The thermodynamics, dynamics and catalysis properties of Hb immobilized on Fe₃O₄@Au NPs were discussed by UV–visible spectrum (UV–vis), electrochemical impedance spectroscopy (EIS), electrochemical quartz crystal microbalance technique (EQCM) and cyclic voltammetry (CV). The electrochemical parameters of Hb on Fe₃O₄@Au NPs modified GCE were further carefully calculated with the results of the effective working area as 3.61 cm², the surface coverage concentration (Γ) as 1.07 × 10⁻¹² mol cm⁻², the electron-transfer rate constant (K_s) as 1.03 s⁻¹, the number of electron transferred (n) as 1.20 and the standard entropy of the immobilized Hb (ΔS⁰′) as calculated to be −104.1 J mol⁻¹ K⁻¹. The electrocatalytic behaviors of the immobilized Hb on Fe₃O₄@Au NPs were applied for the determination of hydrogen peroxide (H₂O₂), oxygen (O₂) and trichloroacetic acid (TCA). The possible functions of Fe₃O₄ core and Au shell as a novel platform for achieving Hb direct electrochemistry were discussed, respectively.     

Synthesis and characterization of polyimide‐γ‐Fe2O3 nanocomposites

Novel polyimide‐γ‐Fe₂O₃ hybrid nanocomposite films (PI/γ‐Fe₂O₃) has been developed from the poly(amic acid) salt of oxydianiline with different weight percentages (5, 10, 15 wt %) of γ‐Fe₂O₃ using tetrahydrofuran (THF) and N,N‐dimethylacetamide (DMAc) as aprotic solvents. The prepared polyimide‐γ‐Fe₂O₃ nanocomposite films were characterized for their structure, morphology, and thermal behavior employing Fourier transform infrared spectroscopy (FTIR), scanning electron micrograph (SEM), transmission electron micrograph (TEM), X‐ray diffraction (XRD), ¹³C‐NMR, and thermal analysis (TGA/DSC) techniques. These studies showed the homogenous dispersion of γ‐Fe₂O₃ in the polyimide matrix with an increase in the thermal stability of the composite films on γ‐Fe₂O₃ loadings. Magnetization measurements (magnetic hysteresis traces) have shown very high values of coercive force indicating their possible use in memory devices and in other related applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 834–840, 2007