带浸没管的惰性粒子振动流化床传热特性

采用带浸没加热管的惰性粒子振动流化床对膏状物料干燥进行了实验研究。考察了加料速率、进气温度、进气速度、加热管功率、振动强度等参数对床温和体积传热系数的影响,得出了计算体积传热系数的关联式。结果表明,在流化床中增设振动和浸没加热管装置,能大大强化传热传质,体积传热系数随加料量、振动强度、加热管功率、进风速度的增加而增大,随进气温度的增加而减小。其结果对惰性粒子流化床干燥器的设计和改进具有重要的指导意义。     

惰性粒子振动流化床中膏状物料干燥

报道了采用带浸没加热管的惰性粒子振动流化床干燥膏状物料的实验研究结果。考察了加料速率、振动条件、进气温度、进气速度、加热管功率等参数对干燥过程的影响,提出采用体积传热系数来评价干燥器传热性能,并得出了计算体积传热系数的准数关联式。结果表明,在流化床中增设振动和浸没加热管装置,能大大强化传热、传质,干燥器热效率达60%,干燥强度超过300 kg·m^-3·h^-1,体积传热系数可达25 kW·m^-3·K^-1,激光粒度分析仪的测定结果表明产品的粒度分布范围较窄,该流化床干燥可以直接得到平均粒径为0.35 μm、比表面积为5.024 m²·g^-1的粉状产品。     

内热式惰性粒子流化床中膏状物料干燥模型

通过对惰性粒子流化床中膏状物料干燥机理的分析,得到了干燥时间及单位面积床层水分汽化量的数学计算式,可对干燥器的性能进行预测。采用带浸没加热管的惰性粒子流化床对膏状钛白物料进行干燥中试研究,采用气流式喷嘴将膏状物料分散成200～400μm的小液滴喷洒在惰性粒子表面进行干燥,探索了适宜的干燥条件,测定和确定了最佳的干燥工艺参数、操作参数和设备参数。结果表明:该干燥工艺能强化床内传热传质,促进高黏性膏糊状物料很好地分散,床层温度分布均匀,干燥器的操作弹性大,热量消耗低,干燥强度高,传热系数可达300W·m-2·K-1以上。     

推进剂药粒水平振动干燥实验

介绍了一种推进剂药粒水平振动连续干燥方法。经过大量的工艺实验,通过调节螺旋加料量、水平振动干燥器振动振幅及频率,探讨了物料在水平振动干燥器内停留时间与温度及水分之间的关系,以及连续干燥的工艺参数对整体工艺的连续性及有效匹配性的影响。在工艺实验中,改进了水平振动干燥器不合理的结构,解决了夹套漏水及物料滞留等技术问题。最佳干燥条件下被干燥后物料的物性参数可满足最终压伸工艺要求。     

内置换热管振动流化床传热特性实验研究

在内置换热管的振动流化床中以玻璃珠为惰性粒子实验物料,测定惰性粒子振动流化床与加热管之间的传热系数,研究了惰性粒子处于流化状态时的传热特性,分析了操作气速、振动频率、惰性粒子直径等因素对传热过程的影响,建立了传热系数与各影响因素之间的关联式。研究结果可为干燥膏状物料时确定适宜的操作参数提供参考。     

正交设计在内热式振动流化床干燥膏状物料中的应用

以初含水率为63．5％的膏状石灰浆料为实验原料，采用正交实验设计方法，分析了内热式振动流化床在干燥膏状物料时的操作参数对干燥产品最终含水率和干燥效率的影响，并利用正交分析确定了最佳操作参数。实验结果表明：通过内热式振动流化床干燥膏状石灰浆料时干燥效果较好，产品含水率可降至0．68％，干燥效率可达68．33％。利用正交分析得到以产品最终含水率和干燥效率为指标的较优操作参数为：加料量4．5kg／h、操作风速2．4m／s、进风温度90℃、内加热功率1．6kW、振动强度1.0。     

振动流化床浸没水平管传热特性研究

为了深入研究振动流化床浸没水平管的传热特性,分别以沙子和玉米细颗粒作为实验物料,用水平探头测定了振动流化床中这2种床层颗粒与浸没水平管间的传热系数,分析了操作气速、振动频率、空气进口温度等因素对传热过程的影响。结果表明:在低气速下,振动是影响振动流化床中传热的主要因素,振动的引入可以明显改善流化作用,可以在低气速下得到较好的传热效果,同时达到节能的效果。通过分析实验结果,建立了振动流化床的传热关联式,模型计算值与实测值能较好吻合。研究结果可为干燥膏状物料时确定适宜的操作参数提供参考。     

振动流化床宽筛分玻璃粒子与水平管局部传热特性

以宽筛分玻璃粒子为实验物料,测定了振动流化床与浸没水平加热管间的局部传热系数,研究了通气速率、振动频率和粒度分布对局部传热系数的影响.结果表明,浸没水平管局部传热系数随流化气速和振动频率的增加先增大而后逐步减小;小颗粒的存在有利于增强加热管与床层的传热;大颗粒比例的增加不利于管壁与床层的传热.由实验数据整理了预测局部传热系数的经验公式,经验公式与实验数据误差在20%以内,吻合较好.     

文丘里干燥器开发研究

介绍了一种新研究开发的气流干燥器———文丘里干燥器。介绍了文丘里干燥器的结构和工作原理。通过实验证明,喷嘴和文丘里管的结合强化了干燥过程,一、二次风的设置使物料停留时间延长,扩大了该气流干燥器的应用范围。就目前的实验设备(φ400mm、容积0.15m3文丘里干燥器)的实验结果进行分析,文丘里干燥器在系统配置尚不完美的情况下,干燥强度达220kg/(m3·h);对不同物料,其生产能力在864～1440t/a;其分级尺寸为φ250mm时,干燥效果最为理想。     

新型干燥设备—振动流化干燥器

在装有粉粒体的容器中,当给以适当的振动,便可使粉粒体流动而出现流化层的现象。振动流化干燥器就是一种通过机械振动使湿物料流态化,利用间接加热进行干燥的设备。利用它可以在减压下进行流化干燥,膏状物料可以同时干燥与粉碎。它的应用范围之广是以前的干燥设备所不及的。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。