共查询到18条相似文献,搜索用时 125 毫秒
1.
2.
目的提高包装机混合式定量的称重精度。方法针对包装机混合式定量称重系统具有非线性和时滞性的特点,构造三支路结构的双自由度数字控制器(RST控制器),等效为前向预测控制器和无延时控制器,以消除系统扰动和滞后的影响,设计基于RST的包装机定量称重控制系统。运用Simulink工具与传统PID控制器和PID-Smith控制器进行仿真对比。结果 RST控制器相较于PID控制器和PID-Smith控制器超调量小、调节时间短、跟踪能力好、鲁棒性强,能够有效地提高包装机称重控制系统的稳定性和控制精度。结论 RST控制器能够提高包装机混合式定量称重精度,从而提高包装机的包装精度。 相似文献
3.
4.
为了提高光伏发电的发电效率,降低发电成本,使用全新设计的传感器,设计了一种光伏自动跟踪控制系统。该系统所使用的传感器仅为四个光敏元件,几乎零成本。文中详细阐述了传感器的结构和工作原理、控制系统的设计以及系统控制的软件实现。试验结果证明,该系统能实现全天候全方位检测并迅速追踪到太阳的位置,有效的提高了跟踪系统的精确性。 相似文献
5.
目的针对目前网络销售货物存在的包装效率低下、人工成本高等问题,设计一台可实现对不同尺寸货物进行自动分类的包装机。方法通过距离光电传感器检测货物的大小,将尺寸不同的货物进行分类,用机械手臂拾取分类好的货物,并放到传送带运送的盒子内,再利用气缸的运动将货物进行封装,最后利用自动打包机将封装好的货物进行外部包装。结果所设计的货物分类包装机能实现对货物进行快速分类、包装,采用气缸带动机器运动,实现了自动化控制,不需人为操作,结构更简单,操作更方便。结论货物自动分类包装机可以用于多种尺寸商品的分类、包装,既可以帮助大型商店、物流公司整理繁杂的货物,又可以帮助小型网店快速整理、包装多品种货物,提高了效率,减少了人工资源浪费。 相似文献
6.
目的提高包装机械热封机构的温度控制精度,以保证包装效率和产品质量。方法针对包装塑料薄膜热封的温度控制,基于单神经元自适应PID控制算法设计一种自动包装机热封温度控制系统。介绍自动包装机热封的基本原理,阐述单神经元自适应PID控制算法的基本原理,并设计一种温度控制器。基于模糊集理论,实现控制器比例、积分和微分系数学习速率的在线调整。基于ARM Cortex-M3和PIC单片机搭建自动包装机热封温度控制系统。结果将该热封温度控制系统应用于自动包装机中,可以将热封温度误差控制在合理的范围内。结论通过仿真验证了文中所述自动包装机热封温度控制系统稳定性较好,具有一定的抗干扰、自适应、自调整能力。 相似文献
7.
针对定量包装机的检定工作,为了提高检定员在现场检定过程中的工作效率,同时满足对数据管理的应用要求。文章设计和研发出一套定量包装机的自动检定系统。该系统在实际应用中能够很好地完成数据采集、数据处理以及记录生成、防篡改等功能,可以显著提升检定的工作效率,确保检定结果的准确可靠。 相似文献
8.
9.
10.
11.
在对电磁兼容问题的定义和学科内容进行简单介绍的基础上 ,本文对自动控制系统中有关传导干扰的问题进行了研究和分析 ,并总结讨论了一些有效抑制系统中传导干扰的措施和方法 相似文献
12.
本文结合复合镀膜设备及镀膜工艺特点,详细分析了复合镀膜设备镀膜工艺流程以及过程中容易产生能耗和污染的问题.并在此基础上,根据设备真空系统、工装和水冷系统、控制系统以及设备各个源的协同作用进行了系统设计,通过PLC和LabVIEW软件协同设计和实现了智能复合镀膜设备自动控制系统,以保证镀膜设备和工艺生产的稳定性及可靠性,... 相似文献
13.
Bazhenov M. G. Galkin V. I. Zharov M. V. Zverlov B. V. Lisov A. A. Orlov L. S. 《Measurement Techniques》2003,46(1):56-58
Maintenance of temperature-rate modes of deformation is considered for isothermal superplastic stamping on a thermocompression unit. In the automated control system proposed for a thermocompression unit a PC regulates the heating rate of the working elements by using custom software and method for obtaining the initial information. 相似文献
14.
15.
Monitoring production processes to assure product quality has been a major managerial and control problem. These processes are subject to shifts to “out-of-control” states, resulting in the production of defective items. Inspection as well as restoration capabilities are necessary to provide early detection and correction of these shifts in the process. This paper considers the costs of different policies for providing these detection and restoration capabilities. These policies amount to periodic or continuous inspection of the production process with perfect information, and continuous or periodic availability of maintenance facilities. The optimal operation of each policy is studied. Comparative analyses are conducted with different specifications of key parameters such as the rate of shift of the process and the cost of producing defective items. These analyses enable the derivation of the optimal policy when only ranges of the values of these parameters are known. 相似文献
16.
Carlos A. Coello Coello Rosa Laura Zavala Gutiérrez Benito Mendoza García Arturo Hernández Aguirre 《工程优选》2013,45(2):109-127
This paper proposes an application of the Ant System (AS) to optimize combinational logic circuits at the gate level. A measure of quality improvement is defined in partially built circuits to compute the distances required by the AS, and those solutions that represent functional circuits with a minimum number of gates are considered as optimal. The proposed methodology is described together with some examples taken from the literature that illustrate the feasibility of the approach. 相似文献
17.
本文介绍以可逆计数器为核心的通用型测控系统的硬件组成,对其中主要电路工作原理进行了分析。既能解决稳定控制的问题,也能实现随动控制功能。文章的最后对该系统的实际应用作了论述。 相似文献