Optimization of Synthesis Parameters for Mesoporous Shell Formation on Magnetic Nanocores and Their Application as Nanocarriers for Docetaxel Cancer Drug

In this work, Fe₃O₄@SiO₂ nanoparticles were coated with mesoporous silica shell by S⁻N⁺I⁻ pathway by using anionic surfactant (S⁻) and co-structure directing agent (N⁺). The role of co-structure directing agent (CSDA) is to assist the electrostatic interaction between negatively charged silica layers and the negatively charged surfactant molecules. Prior to the mesoporous shell formation step, magnetic cores were coated with a dense silica layer to prevent iron oxide cores from leaching into the mother system under any acidic circumstances. However, it was found that both dense and mesoporous coating parameters affect the textural properties of the produced mesoporous silica shell (i.e., surface area, pore volume and shell thickness). The synthesized Fe₃O₄@SiO₂@m-SiO₂ (MCMSS) nanoparticles have been characterized by low-angle X-ray diffraction, transmission electron microscopy (TEM), and N₂ adsorption-desorption analysis, and magnetic properties. The synthesized particles had dense and mesoporous silica shells of 8–37 nm and 26–50 nm, respectively. Furthermore, MCMSS possessed surface area of ca. 259–621 m²·g⁻¹, and pore volume of ca. 0.216–0.443 cc·g⁻¹. MCMSS showed docetaxcel cancer drug storage capacity of 25–33 w/w% and possessed control release from their mesochannels which suggest them as proper nanocarriers for docetaxcel molecules.     

Preparation and characterization of core–shell structure Fe3O4/C nanoparticles with unique stability and high electrochemical performance for lithium-ion battery anode material

Core–shell structure carbon coating Fe₃O₄ nanoparticles are prepared by a two-step method. The crystalline structure and the electrochemical performance of the prepared samples are investigated. The results indicate that a uniform and continuous carbon layer is formed on the surface of Fe₃O₄ nanoparticles. The core–shell structure Fe₃O₄/C nanoparticles show a high initial discharge capacity of 1546 mAh g⁻¹ and a specific stable discharge capacity of about 800 mAh g⁻¹ at 0.5 C with no noticeable capacity fading up to 100 cycles.     

An Ultrasensitive Electrochemiluminescence Immunoassay for Carbohydrate Antigen 19-9 in Serum Based on Antibody Labeled Fe3O4 Nanoparticles as Capture Probes and Graphene/CdTe Quantum Dot Bionanoconjugates as Signal Amplifiers

The CdTe quantum dots (QDs), graphene nanocomposite (CdTe-G) and dextran–Fe₃O₄ magnetic nanoparticles have been synthesized for developing an ultrasensitive electrochemiluminescence (ECL) immunoassay for Carcinoembryonic antigen 19-9 (CA 19-9) in serums. Firstly, the capture probes (CA 19-9 Ab1/Fe₃O₄) for enriching CA 19-9 were synthesized by immobilizing the CA 19-9’s first antibody (CA 19-9 Ab1) on magnetic nanoparticles (dextran-Fe₃O₄). Secondly, the signal probes (CA 19-9 Ab2/CdTe-G), which can emit an ECL signal, were formed by attaching the secondary CA 19-9 antibody (CA 19-9 Ab2) to the surface of the CdTe-G. Thirdly, the above two probes were used for conjugating with a serial of CA 19-9 concentrations. Graphene can immobilize dozens of CdTe QDs on their surface, which can emit stronger ECL intensity than CdTe QDs. Based on the amplified signal, ultrasensitive antigen detection can be realized. Under the optimal conditions, the ECL signal depended linearly on the logarithm of CA 19-9 concentration from 0.005 to 100 pg/mL, and the detection limit was 0.002 pg/mL. Finally, five samples of human serum were tested, and the results were compared with a time-resolved fluorescence assay (TRFA). The novel immunoassay provides a stable, specific and highly sensitive immunoassay protocol for tumor marker detection at very low levels, which can be applied in early diagnosis of tumor.     

Multifuctional Fe3O4@C/YVO4:Dy nanopowers: Preparation,luminescence and magnetic properties

As-synthesized Fe₃O₄ nanoparticles were encapsulated with carbon layers through a simple hydrothermal process. Fe₃O₄/C nanoparticles were coated with YVO₄:Dy³⁺ phosphors to form bifunctional Fe₃O₄@C@YVO₄:Dy³⁺ composites. Their structure, luminescence and magnetic properties were characterized by XRD, SEM, TEM, HRTEM, PL spectra and VSM. The experimental results indicated that the as-prepared bifunctional composites displayed well-defined core–shell structures. The ∼12 nm diameter YVO₄:Dy³⁺ shell exhibited tetragonal structure. Additionally, the composites exhibited a high saturation magnetization (13 emu/g) and excellent luminescence properties, indicating their promising potential as multifunctional biosensors for biomedical applications.     

Hydrothermal synthesis of 3D hollow porous Fe3O4 microspheres towards catalytic removal of organic pollutants

Three-dimensional hollow porous superparamagnetic Fe₃O₄ microspheres were synthesized via a facile hydrothermal process. A series of characterizations done with X-ray diffraction, Brunauer-Emmett-Teller method, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy indicated that the production of Fe₃O₄ microspheres possessed good monodispersity, uniform size distribution, hollow and porous structural characters, and strong superparamagnetic behavior. The obtained Fe₃O₄ microspheres have a diameter of ca. 300 nm, which is composed of many interconnected nanoparticles with a size of ca. 20 nm. The saturation magnetization is 80.6 emu·g^-1. The as-prepared products had promising applications as novel catalysts to remove organic pollutants (methylene blue) from wastewater in the presence of H₂O₂ and ultrasound irradiation.     

Sonochemical synthesis of magnetic core–shell Fe3O4@ZrO2 nanoparticles and their application to the highly effective immobilization of myoglobin for direct electrochemistry

In this study, bifunctional Fe₃O₄@ZrO₂ magnetic core–shell nanoparticles (NPs), synthesized by a simple and effective sonochemical approach, were attached to the surface of a magnetic glassy carbon electrode (MGCE) and successfully applied to the immobilization/adsorption of myoglobin (Mb) for constructing a novel biosensor platform. With the advantages of the magnetism and the excellent biocompatibility of the Fe₃O₄@ZrO₂ NPs, Mb could be easily immobilized on the surface of the electrode in the present of external magnetic field and well retained its bioactivity, hence dramatically facilitated direct electron transfer of Mb was demonstrated. The proposed Mb/Fe₃O₄@ZrO₂ biofilm electrode exhibited excellent electrocatalytic behaviors towards the reduction of H₂O₂ with a linear range from 0.64 μM to 148 μM. This presented system avoids the complex synthesis for protecting Fe₃O₄ NPs, supplies a simple, effective and inexpensive way to immobilize protein, and is promising for construction of third-generation biosensors and other bio-magnetic induction devices.     

Morphological control of heterostructured nanowires synthesized by sol-flame method

Heterostructured nanowires, such as core/shell nanowires and nanoparticle-decorated nanowires, are versatile building blocks for a wide range of applications because they integrate dissimilar materials at the nanometer scale to achieve unique functionalities. The sol-flame method is a new, rapid, low-cost, versatile, and scalable method for the synthesis of heterostructured nanowires, in which arrays of nanowires are decorated with other materials in the form of shells or chains of nanoparticles. In a typical sol-flame synthesis, nanowires are dip-coated with a solution containing precursors of the materials to be decorated, then dried in air, and subsequently heated in the post-flame region of a flame at high temperature (over 900°C) for only a few seconds. Here, we report the effects of the precursor solution on the final morphology of the heterostructured nanowire using Co₃O₄ decorated CuO nanowires as a model system. When a volatile cobalt salt precursor is used with sufficient residual solvent, both solvent and cobalt precursor evaporate during the flame annealing step, leading to the formation of Co₃O₄ nanoparticle chains by a gas-solid transition. The length of the nanoparticle chains is mainly controlled by the temperature of combustion of the solvent. On the other hand, when a non-volatile cobalt salt precursor is used, only the solvent evaporates and the cobalt salt is converted to nanoparticles by a liquid–solid transition, forming a conformal Co₃O₄ shell. This study facilitates the use of the sol-flame method for synthesizing heterostructured nanowires with controlled morphologies to satisfy the needs of diverse applications.     

Nanocomposite Fe2O3–SiO2 inclusion pigments from post-functionalized mesoporous silicas

High-surface mesoporous silicas with different pore sizes were employed for the first time as silicon precursors in the synthesis of reddish Fe₂O₃–SiO₂ inclusion pigments. Interestingly, the size of included Fe₂O₃ nanoparticles was partially controlled through confinement effects into silica mesopores. Notably, impregnated samples showed a more homogeneous and efficient encapsulation of smaller and monodisperse hematite nanoparticles (sizes around 10–35 nm). Moreover, they resulted in an improved reddish color at 1000 °C within a ceramic glaze. The best red shade (a* ≈ 18) was associated to nanocomposite with smaller hematite nanoparticles (around 5 nm). These promising results suggest the possibility to improve the reddish coloration and thermostability of Fe₂O₃–SiO₂ ceramic pigments through and adequate control of confinement effects into sintered mesoporous silicas.     

Metal oxides nanoparticles on SBA-15: Efficient catalyst for methane combustion

Catalysts based on crystalline nanoparticles of Mn and Co metal oxides supported on mesoporous silica SBA-15 have been developed. These materials were characterized by XRD, BET and transmission electron microscopy (TEM) techniques. SBA-15 mesoporous silica was synthesized by a conventional sol–gel method using a tri-block copolymer as surfactant. Supported Mn₃O₄ and Co₃O₄ nanoparticles were obtained after calcination of as-impregnated SBA-15 by a metal salt precursor. The catalytic activity was evaluated in the combustion of methane at low concentration.Co₃O₄/SBA-15 (7 wt.%) exhibits the highest performance among the different oxides. Furthermore, this novel generation of catalysts appeared as active as conventional LaCoO₃ perovskite, usually taken as reference for this reaction. Thanks to its organized meso-structures, SBA-15 material creates peculiar diffusion conditions for reactants and/or products.     

A novel platform of hemoglobin on core–shell structurally Fe3O4@Au nanoparticles and its direct electrochemistry

A novel platform, which hemoglobin (Hb) was immobilized on core–shell structurally Fe₃O₄/Au nanoparticles (simplified as Fe₃O₄@Au NPs) modified glassy carbon electrode (GCE), has been developed for fabricating the third biosensors. Fe₃O₄@Au NPs, characterized using transmission electron microscope (TEM), scanning electron microscope (SEM) and energy dispersive spectra (EDS), were coated onto GCE mediated by chitosan so as to provide larger surface area for anchoring Hb. The thermodynamics, dynamics and catalysis properties of Hb immobilized on Fe₃O₄@Au NPs were discussed by UV–visible spectrum (UV–vis), electrochemical impedance spectroscopy (EIS), electrochemical quartz crystal microbalance technique (EQCM) and cyclic voltammetry (CV). The electrochemical parameters of Hb on Fe₃O₄@Au NPs modified GCE were further carefully calculated with the results of the effective working area as 3.61 cm², the surface coverage concentration (Γ) as 1.07 × 10⁻¹² mol cm⁻², the electron-transfer rate constant (K_s) as 1.03 s⁻¹, the number of electron transferred (n) as 1.20 and the standard entropy of the immobilized Hb (ΔS⁰′) as calculated to be −104.1 J mol⁻¹ K⁻¹. The electrocatalytic behaviors of the immobilized Hb on Fe₃O₄@Au NPs were applied for the determination of hydrogen peroxide (H₂O₂), oxygen (O₂) and trichloroacetic acid (TCA). The possible functions of Fe₃O₄ core and Au shell as a novel platform for achieving Hb direct electrochemistry were discussed, respectively.     

Study on Maximum Specific Loss Power in Fe3O4 Nanoparticles Decorated with Biocompatible Gamma-Cyclodextrins for Cancer Therapy with Superparamagnetic Hyperthermia

Different chemical agents are used for the biocompatibility and/or functionality of the nanoparticles used in magnetic hyperthermia to reduce or even eliminate cellular toxicity and to limit the interaction between them (van der Waals and magnetic dipolar interactions), with highly beneficial effects on the efficiency of magnetic hyperthermia in cancer therapy. In this paper we propose an innovative strategy for the biocompatibility of these nanoparticles using gamma-cyclodextrins (γ-CDs) to decorate the surface of magnetite (Fe₃O₄) nanoparticles. The influence of the biocompatible organic layer of cyclodextrins, from the surface of Fe₃O₄ ferrimagnetic nanoparticles, on the maximum specific loss power in superparamagnetic hyperthermia, is presented and analyzed in detail in this paper. Furthermore, our study shows the optimum conditions in which the magnetic nanoparticles covered with gamma-cyclodextrin (Fe₃O₄–γ-CDs) can be utilized in superparamagnetic hyperthermia for an alternative cancer therapy with higher efficiency in destroying tumoral cells and eliminating cellular toxicity.     

Fe3O4 Nanozymes Improve Neuroblast Differentiation and Blood-Brain Barrier Integrity of the Hippocampal Dentate Gyrus in D-Galactose-Induced Aged Mice

Aging is a process associated with blood–brain barrier (BBB) damage and the reduction in neurogenesis, and is the greatest known risk factor for neurodegenerative disorders. However, the effects of Fe₃O₄ nanozymes on neurogenesis have rarely been studied. This study examined the effects of Fe₃O₄ nanozymes on neuronal differentiation in the dentate gyrus (DG) and BBB integrity of D-galactose-induced aged mice. Long-term treatment with Fe₃O₄ nanozymes (10 μg/mL diluted in ddH₂O daily) markedly increased the doublecortin (DCX) immunoreactivity and decreased BBB injury induced by D-galactose treatment. In addition, the decreases in the levels of antioxidant proteins including superoxide dismutase (SOD) and catalase as well as autophagy-related proteins such as Becin-1, LC3II/I, and Atg7 induced by D-galactose treatment were significantly ameliorated by Fe₃O₄ nanozymes in the DG of the mouse hippocampus. Furthermore, Fe₃O₄ nanozyme treatment showed an inhibitory effect against apoptosis in the hippocampus. In conclusion, Fe₃O₄ nanozymes can relieve neuroblast damage and promote neuroblast differentiation in the hippocampal DG by regulating oxidative stress, apoptosis, and autophagy.     

In situ preparation of monodispersed Ag/polyaniline/Fe3O4 nanoparticles via heterogeneous nucleation

Acrylic acid and styrene were polymerized onto monodispersed Fe₃O₄ nanoparticles using a grafting copolymerization method. Aniline molecules were then bonded onto the Fe₃O₄ nanoparticles by electrostatic self-assembly and further polymerized to obtain uniform polyaniline/Fe₃O₄ (PANI/Fe₃O₄) nanoparticles (approximately 35 nm). Finally, monodispersed Ag/PANI/Fe₃O₄ nanoparticles were prepared by an in situ reduction reaction between emeraldine PANI and silver nitrate. Fourier transform infrared and UV-visible spectrometers and a transmission electron microscope were used to characterize both the chemical structure and the morphology of the resulting nanoparticles.     

聚乙二醇/聚乙烯吡咯烷酮修饰的纳米Fe3O4粒子的制备与表征

为了获得能够在水中稳定分散,具有广泛应用前景的磁性纳米粒子,以不同分子量的聚乙烯吡咯烷酮(PVP)作为修饰剂,在聚乙二醇(PEG)中高温热分解乙酰丙酮铁(Fe(acac)₃)制备了纳米Fe₃O₄粒子。采用X射线粉末衍射仪(XRD)、透射电镜(TEM)、高分辨透射电镜(HRTEM)、超导量子干涉仪(SQUID)、热重分析仪(TGA)、傅里叶变换红外光谱仪(FT-IR)、纳米粒度与zeta电位分析仪对样品进行了表征,并对样品在生理盐水和生理缓冲液中的稳定性进行了研究,结果表明:制备的纳米Fe₃O₄粒子具有高的结晶度以及单分散性,在300 K下,具有超顺磁性和较高的饱和磁化强度;PEG和PVP共同修饰于纳米Fe₃O₄粒子表面,为纳米Fe₃O₄粒子提供了良好的水分散性;制备的纳米Fe₃O₄粒子在生理盐水和多种生理缓冲液中能够高度溶解并稳定地分散。水中的纳米Fe₃O₄粒子表面呈电中性,表面修饰层的空间位阻效应是所制备的纳米粒子在水溶液中高分散的原因。     

Efficient solar photocatalyst based on cobalt oxide/iron oxide composite nanofibers for the detoxification of organic pollutants

A Co₃O₄/Fe₂O₃ composite nanofiber-based solar photocatalyst has been prepared, and its catalytic performance was evaluated by degrading acridine orange (AO) and brilliant cresyl blue (BCB) beneath solar light. The morphological and physiochemical structure of the synthesized solar photocatalyst was characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR). FESEM indicates that the Co₃O₄/Fe₂O₃ composite has fiber-like nanostructures with an average diameter of approximately 20 nm. These nanofibers are made of aggregated nanoparticles having approximately 8.0 nm of average diameter. The optical properties were examined by UV-visible spectrophotometry, and the band gap of the solar photocatalyst was found to be 2.12 eV. The as-grown solar photocatalyst exhibited high catalytic degradation in a short time by applying to degrade AO and BCB. The pH had an effect on the catalytic performance of the as-grown solar photocatalyst, and it was found that the synthesized solar photocatalyst is more efficient at high pH. The kinetics study of both AO and BCB degradation indicates that the as-grown nanocatalyst would be a talented and efficient solar photocatalyst for the removal of hazardous and toxic organic materials.     

Production of Galactooligosaccharides Using β-Galactosidase Immobilized on Chitosan-Coated Magnetic Nanoparticles with Tris(hydroxymethyl)phosphine as an Optional Coupling Agent

β-Galactosidase was immobilized on chitosan-coated magnetic Fe₃O₄ nanoparticles and was used to produce galactooligosaccharides (GOS) from lactose. Immobilized enzyme was prepared with or without the coupling agent, tris(hydroxymethyl)phosphine (THP). The two immobilized systems and the free enzyme achieved their maximum activity at pH 6.0 with an optimal temperature of 50 °C. The immobilized enzymes showed higher activities at a wider range of temperatures and pH. Furthermore, the immobilized enzyme coupled with THP showed higher thermal stability than that without THP. However, activity retention of batchwise reactions was similar for both immobilized systems. All the three enzyme systems produced GOS compound with similar concentration profiles, with a maximum GOS yield of 50.5% from 36% (w·v⁻¹) lactose on a dry weight basis. The chitosan-coated magnetic Fe₃O₄ nanoparticles can be regenerated using a desorption/re-adsorption process described in this study.     

Enhanced cycling performance of Fe3O4-graphene nanocomposite as an anode material for lithium-ion batteries

Fe₃O₄-graphene nanocomposite was prepared by a gas/liquid interface reaction. The structure and morphology of the Fe₃O₄-graphene nanocomposite were characterized by X-ray diffraction, scanning electron microscopy and high-resolution transmission electron microscopy. The electrochemical performances were evaluated in coin-type cells. Electrochemical tests show that the Fe₃O₄-22.7 wt.% graphene nanocomposite exhibits much higher capacity retention with a large reversible specific capacity of 1048 mAh g⁻¹ (99% of the initial reversible specific capacity) at the 90th cycle in comparison with that of the bare Fe₃O₄ nanoparticles (only 226 mAh g⁻¹ at the 34th cycle). The enhanced cycling performance can be attributed to the facts that the graphene sheets distributed between the Fe₃O₄ nanoparticles can prevent the aggregation of the Fe₃O₄ nanoparticles, and the Fe₃O₄-graphene nanocomposite can provide buffering spaces against the volume changes of Fe₃O₄ nanoparticles during electrochemical cycling.     

Facile Synthesis of FeCo/Fe3O4 Nanocomposite with High Wave-Absorbing Properties

The FeCo/Fe₃O₄ nanocomposite was synthesized using the hydrothermal approach, in which the FeCo alloy and Fe₃O₄ are formed by one step. The structure of the FeCo/Fe₃O₄ nanocomposite was characterized by means of Scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray energy-dispersive spectrometer spectroscopy (EDX). They show that the mass ratio of FeCo/Fe₃O₄ strongly depends on the reaction temperature. Such various architectures follow a stepwise growth mechanism of the composites prepared in various reaction temperatures were also discussed. It indicates that this strategy is facile, effective and controllable for the synthesis of FeCo/Fe₃O₄ by the one-step method. Furthermore, the magnetic and wave-absorbing properties of the nanocomposites with various structures were investigated in detail. The results show that the FeCo/Fe₃O₄ with higher mass ratio has higher magnetic properties. Moreover, the FeCo/Fe₃O₄ nanocomposite shows high wave-absorbing properties (e.g., −37.9 dB), which are expected to apply in microwave absorbing materials.     

磁性Fe3O4纳米粒子用作靶向药物载体的制备及分析

Fe3O4 magnetic nanoparticles were prepared by the aqueous co-precipitation of FeCl3-6H2O and FeCl2-4H2O with addition of ammonium hydroxide. The conditions for the preparation of Fe3O4 magnetic nanoparticles were optimized, and Fe3O4 magnetic nanoparticles obtained were characterized systematically by means of transmission electron microscope （TEM）, dynamic laser scattering analyzer （DLS） and X-ray diffraction （XRD）. The results revealed that the magnetic nanoparticles were cubic shaped and dispersive, with narrow size distribution and average diameter of 11.4 nm. It was found that the homogeneous variation of pH value in the solution via the control on the dropping rate of aqueous ammonia played a critical role in size distribution. The magnetic response of the product in the magnetic field was also analyzed and evaluated carefully. A 32.6 mT magnetic field which is produced by four ferromagnets was found to be sufficient to excite the dipole moments of 0.05 g Fe3O4 powder 2 cm far away from the ferromagnets. In conclusion, the Fe3O4 magnetic nanoparticles with excellent properties were competent for the magnetic carders of targeted-drug in future application.     

A novel method for the synthesis of Fe3O4 nanoparticles/CdS nanowires heterostructure nanocomposite and uses in photodegradation of methylene blue

We report here a simple, efficient, practical, and novel method for the preparation of Fe₃O₄ nanoparticles (NPs)/CdS nanowires. The CdS nanowire/Fe₃O₄ NP reported here was characterized by transmission electron microscopy (TEM), X-ray Diffraction (XRD), vibrating sample magnetometer (VSM), and energy-dispersive X-ray. Cadmium diethyl dithiophosphate has been used as a 3 in 1 precursor (cadmium, sulfur, and ligand source) for the synthesis of high-quality one-dimensional Fe₃O₄ NPs/CdS nanowires using a simple hydrothermal method in the presence of Fe₃O₄ NPs in water. Photocatalytic activity studies show that the nanocomposite has good photocatalytic activity toward the photodegradation of methylene blue in an aqueous solution.