Proanthocyanidin‐Induced Horizontal Arrangement in Poly(vinyl alcohol)/Graphene Composites with Enhanced Mechanical Properties

A green approach is employed to prepare mechanically enhanced composites by adding noncovalently proanthocyanidin (PC)‐modified graphene (PC‐rGO) into poly(vinyl alcohol) (PVA). Ascorbic acid (AA) is used as the reducing agent, and PC is used as a dispersant to synthesize low‐defect and fully dispersed graphene. After static treatment, the PC‐rGO sheets in the composite form a horizontally arranged structure. Compared with neat PVA, the Young's modulus of the graphene‐modified composites is significantly enhanced by approximately 79.3% with incorporation of 0.9 wt% PC‐rGO. The composites incorporated with GO or AA‐rGO (without PC) have randomly distributed GO structures and apparent rGO agglomeration, resulting in a weaker mechanical property. The dispersibility, degree of defects, distribution state of graphene, and interactions with the polymer matrix are directly related to the final mechanical performance. This new approach to mechanically enhance graphene‐embedded PVA composites provides the possibility for large‐scale production of graphene‐reinforced composite materials.     

Ionic liquid‐modified graphene/poly(vinyl alcohol) composite with enhanced properties

How to preserve the structure integrity of graphene while enhance its dispersion and compatibility in matrix attracts the attention of researchers in graphene/polymer nanocomposite field. In this paper, methacryloxyethyltrimethyl ammonium chloride (DMC), a kind of ionic liquids, was first used to non‐covalently functionalize graphene in the process of graphene oxide (GO) reduction. The as‐modified graphene (DMC‐rGO) was further incorporated into poly(vinyl alcohol) (PVA) matrix by solution casting technique to fabricate DMC‐rGO/PVA composites. The structure and properties of the obtained DMC‐rGO were investigated by X‐ray diffraction analysis (XRD), X‐ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscope (TEM), Atomic force microscopy (AFM), and Raman test. The results showed that graphene could be successfully modified by DMC through ionic–π interaction and the structure integrity of the graphene could be reserved by this non‐covalently approach. Furthermore, after co‐reduction process, some hydroxyl groups were introduced into DMC‐rGO. In virtue of these intrinsic properties of DMC‐rGO, the fabricated DMC‐rGO/PVA composites exhibit considerable enhancements in mechanical properties and remarkable improvements in thermal stability, as well as the enhancement in electrical conductivity at low DMC‐rGO loading. This simple modification approach gives a new opportunity to improve the performances of graphene/polymer composites. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45006.     

Investigation of electrical,mechanical, and thermal properties of functionalized multiwalled carbon nanotubes‐reduced graphene Oxide/PMMA hybrid nanocomposites

Electrical, mechanical, and thermal properties of the poly(methyl methacrylate) (PMMA) composites containing functionalized multiwalled carbon nanotubes (f‐MWCNTs) and reduced graphene oxide (rGO) hybrid nanofillers have been investigated. The observed electrical percolation threshold of FHC is 0.8 wt% with maximum conductivity of 1.21 × 10^?3 S/cm at 4 wt% of f‐MWCNTs. The electrical transport mechanism and magneto resistance studied of hybrid composites have also been investigated. Progressive addition of f‐MWCNTs in rGO/PMMA composite results increase in mechanical (tensile strength and Young's modulus) and thermal (thermal stability) properties of f‐MWCNTs‐rGO/PMMA hybrid nanocomposites (FHC). The increased mechanical properties are due to the efficient load transfer from PMMA matrix to f‐MWCNTs and rGO through better chemical interaction. The strong interaction between PMMA and f‐MWCNTs‐rGO in FHC is the main cause for improved thermal stability. POLYM. ENG. SCI., 59:1075–1083, 2019. © 2019 Society of Plastics Engineers     

Preparation of a functional reduced graphene oxide and carbon nanotube hybrid and its reinforcement effects on the properties of polyimide composites

The homogeneous dispersion and strong interfacial interactions of carbon nanomaterials are vital factors on enhancing the properties of polymer composites. Two‐dimensional reduced graphene oxide (rGO) and one‐dimensional carbon nanotubes (CNTs) were first grafted by 4,4′‐oxydianiline (ODA). The successful grafting of ODA onto the rGO and CNTs were confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis, and X‐ray photoelectron spectroscopy. The hybrid carbon nanomaterials of the functionalized CNTs and rGO with different ratios were prepared via a solution‐mixing method, and their dispersion state was investigated. The hybrid carbon nanomaterials with good stability were introduced to polyimide (PI) via in situ polymerization. The morphology and properties of the polymer composites were studied. The results show that much better mechanical and electrical properties of the composites could be achieved in comparison with those of the neat PI. An improvement of 100.7% on the tensile strength and eight orders for the electrical conductivity were achieved at only a 1.0 wt % hybrid content. A significant enhancement effect was attributed to the homogeneous dispersion of the filler, filler–matrix strong interfacial interactions, and unique structure of the hybrid carbon nanomaterials in the composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44575.     

Reduced graphene oxide/carbon nanotubes nanohybrids as preformed reinforcement for polystyrene composites

Three‐dimensional carbon nanohybrids constructed by reduced graphene oxide (rGO) and carbon nanotubes (CNTs) are prepared via simultaneous hydrothermal and chemical reduction reactions. The macroscopic rGO/CNTs monolith is used as the preformed reinforcement for polystyrene (PS) composites to function as the continuous conductive pathway. During hydrothermal reaction, interconnected network consisting of rGO and CNTs, driven by the hydrophobic and π‐π interactions, is formed and then frozen by the following freeze‐drying processing. Fourier transform infrared and X‐ray diffraction results confirm that CNTs play an important role in tuning the amphiphilicity and pore structure of the as‐prepared rGO/CNTs nanohybrids. rGO/CNTs/PS composites prepared via vacuum‐assisted impregnation process exhibit the highest electrical conductivity of 1.21 × 10^?3 S m^?1, which is 11 orders of magnitude higher than that of neat PS. The functional synergies of rGO and CNTs are identified to establish an efficient route for improving the electrical property of polymer based composites. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45054.     

Synthesis of manganese (IV) oxide at activated carbon on reduced graphene oxide sheets via laser irradiation technique for organic binder-free electrodes in flexible supercapacitors

We report a novel, green, scalable technique to synthesize binder-free, high-purity conductive composite comprising activated carbon (AC), manganese dioxide nanorods (MnO₂), and reduced graphene oxide sheets (rGO) for flexible supercapacitors with outstanding electrochemical performance. UV pulsed laser irradiation of GO-based composite dispersion (AC/GO or MnO₂@AC/GO) in ethanol aqueous medium was used to induce a photocatalytic reduction of GO and simultaneous anchor AC particles or AC loaded MnO₂ nanorods (MnO₂@AC) on the reduced GO sheets (rGO) at room temperature and atmospheric pressure. rGO sheets serve as a large surface area, conductive binder to enhance the ion adsorption, electrical conductivity, and mechanical flexibility of supercapacitor electrodes. This laser-induced photocatalytic reduction method was used to prepare two different rGO-based colloidal composites AC/rGO (CG) and MnO₂@AC/rGO (MCG). The prepared rGO-based colloidal composites were used to fabricate symmetric supercapacitors (CG//CG and MCG//MCG) and asymmetric supercapacitors (MCG//CG) in which MCG is the positive electrode and CG is the negative one. All prepared rGO-based supercapacitors demonstrated significant improvement in their electrochemical performance compared with rGO-free AC based supercapacitors. The enhancement in the electrochemical properties of rGO-based supercapacitors could be attributed to the intrinsic characteristics of rGO, such as high surface area, excellent electrical conductivity, and super mechanical flexibility. Our approach is a one-step, scalable, cost-effective synthesis technique to produce all binder-free AC/rGO based composites for flexible energy-storage devices.     

Graphene/carbon black/natural rubber composites prepared by a wet compounding and latex mixing process

The extensively used latex mixing approach to prepare graphene can improve the graphene dispersion but meets some challenges in the preparation of high content carbon black filled rubber system like a rubber tire. Owing to the high melt viscosity of the rubber/graphene masterbatch, the dispersion of carbon black is not perfect during twin-roll mixing and some aggregates will be formed. Here we proposed a wet compounding process, combined with ultrasonically assisted latex mixing, named as the WCL method to prepare reduced graphene oxide/carbon black/natural rubber (rGO/CB/NR) composites. The morphological observations confirmed that both graphene and carbon black can be evenly dispersed in the rubber composites. The incorporation of rGO also improves the hardness, thermal conductivity and anti-aging properties of the composites. The rGO/CB/NR composites prepared by the WCL method possess better mechanical properties compared to conventional latex mixing. The entanglement-bound rubber tube model was utilised to understand the reinforcing mechanism.     

Multifunctional and environmentally friendly nanocomposites between natural rubber and graphene or graphene oxide

This work describes a green route to multifunctional nanocomposite materials composed of natural rubber (NR) latex and graphene (rGO) or graphene oxide (GO). Aqueous solutions with different concentrations of GO and rGO (prepared with the surfactant cetyltrimethylammonium bromide – CTAB) were mixed with natural rubber latex under magnetic stirring followed by sonication. The slurries obtained after casting were dried in an oven in air at 70 °C for 24 h. The nanocomposites were characterized by TEM and SEM, AFM and KFM. The thermal, electrical and mechanical properties were evaluated using TGA, resistivity measurements (four-point) and DMA. Swelling tests were performed using three solvents with different polarities: xylene, isopropanol and water. The inclusion of filler networks in the polymeric matrices provided significant improvements in the electrical, chemical and mechanical properties, in comparison to the unfilled polymer. In addition, the nanocomposites proved to be biodegradable.     

Functionalized graphene‐reinforced rubber composite: Mechanical and tribological behavior study

A functionalized graphene, fluorinated graphene nanosheets (FGS), and SiO₂ nanoparticles as reinforcing fillers were employed to improve the mechanical properties of the solution styrene butadiene and butadiene rubber composites (SSBR‐BR). The results showed that the mechanical properties of SSBR‐BR composite filled with FGS were substantially improved than those of the unfilled and equivalent filler loaded graphene oxide (GO) and reduced graphene oxide (rGO) filled SSBR‐BR composites. It can be ascribed to the fact that the hydrophobic surface of FGS can be endowed the good dispersion in rubber matrix and stronger interfacial interaction between rubber and fillers. The tribological properties of these composites are also investigated. The results reveal that incorporation of GO, rGO, and FGS in SSBR‐BR composites can decrease antiwear properties because the existence of layered graphene promotes to tear and peel off. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44970.     

Preparation of functional reduced graphene oxide and its influence on the properties of polyimide composites

Homogeneous dispersion and strong filler–matrix interfacial interactions were vital factors for graphene for enhancing the properties of polymer composites. To improve the dispersion of graphene in the polymer matrix and enhance the interfacial interactions, graphene oxide (GO), as an important precursor of graphene, was functionalized with amine‐terminated poly(ethylene glycol) (PEG–NH₂) to prepare GO–poly(ethylene glycol) (PEG). Then, GO–PEG was further reduced to prepare modified reduced graphene oxide (rGO)–PEG with N₂H₄·H₂O. The success of the modification was confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis, and Raman spectroscopy. Different loadings of rGO–PEG were introduced into polyimide (PI) to produce composites via in situ polymerization and a thermal reduction process. The modification of PEG–NH₂ on the surface of rGO inhibited its reaggregation and improved the filler–matrix interfacial interactions. The properties of the composites were enhanced by the incorporation of rGO–PEG. With the addition of 1.0 wt % rGO–PEG, the tensile strength of PI increased by 81.5%, and the electrical conductivity increased by eight orders of magnitude. This significant improvement was attributed to the homogeneous dispersion of rGO–PEG and its strong filler–matrix interfacial interactions. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45119.     

Chemically modified graphene oxide/polybenzimidazobenzophenanthroline nanocomposites with improved electrical conductivity

Graphene/polybenzimidazobenzophenanthroline nanocomposites were prepared through the liquid-phase exfoliation of graphene oxide (GO) and reduced graphene oxide (rGO) in methanesulfonic acid with subsequent solution mixing. Various chemical and combined chemical-thermal methods were examined to be effective for producing rGO with highly graphitic structure and excellent electrical conductivity. Raman and X-ray photoelectron spectroscopy showed higher degree of reduction of the GO with the combined chemical-thermal method compared to other chemical reduction processes. Structural characterization of the nanocomposites by X-ray diffraction, scanning electron microscopy and transmission electron microscopy showed good exfoliation and dispersion of both GO and rGO fillers in the polymer matrix. The thermogravimetric analysis found that the nanocomposites with rGO have higher onset and maximum weight loss temperatures than those with GO. Compared with the pure polymer, the electrical conductivity of the nanocomposites containing 10 wt% GO and GO reduced by the combined chemical-thermal treatment showed a remarkable increase by four and seven orders of magnitude, respectively. Long-term in-situ thermal reduction was performed to further improve the conductivities of the nanocomposites.     

Enhanced field emission properties of a reduced graphene oxide/carbon nanotube hybrid film

A facile vacuum filtration method for the preparation of hybrid films to achieve superior field emission properties from carbon nanotubes (CNTs) using reduced graphene oxide (rGO) as a bi-functional filler has been proposed. In the hybrid films, CNTs serve as electron emitters, while rGO helps to control the density of the CNT-emitters and reduce electrical resistance of the films. Via controlling volumes of CNTs and rGO dispersions, electron field emission properties of the hybrid films can be easily tailored. Higher weight ratio of rGO:CNT results in better electrical properties and the best field emission property is achieved when a rGO:CNT weight ratio of 1:3 is employed. The hybrid film reveals a significant improvement in field emission properties, as compared with the CNT film without adding rGO. Decreases in sheet resistance, turn-on field, and threshold field are attributed to the formation of extended conjugated network between CNTs and rGO in association with the reduction of screening effect through the optimization of density of CNT-emitters. The concept that rGO can be employed to control the density of CNT emitters will be of special interest for field emission enhancement.     

Mechanical properties and biomedical applications of a nanotube hydroxyapatite-reduced graphene oxide composite

As a result of the growing interest in the biological and mechanical performance of hydroxyapatite (HA)–graphene nano-sheets (GNs) composite systems, reduced graphene oxide (rGO) reinforced hydroxyapatite nano-tube (nHA) composites were synthesized in situ using a simple hydrothermal method in a mixed solvent system of ethylene glycol (EG), N,N-dimethylformamide (DMF) and water, without using any of the typical reducing agents. The consolidation process was performed by hot isostatic pressing (HIP) at 1150 °C and 160 MPa. The composites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy, enabling confirmation of the synthesis and reduction of the nHA and rGO, respectively. The structure of the synthesized powder and cell attachment on the sintered sample was confirmed by field emission scanning electron microscopy (FESEM). The effects of the rGO on the mechanical properties and the in vitro biocompatibility of the nHA based ceramic composites were investigated. The elastic modulus and fracture toughness of the sintered samples increased with the increase of the rGO content when compared to the pure nHA by 86% and 40%, respectively. Cell culture and viability test results showed that the addition of the rGO promotes osteoblast adhesion and proliferation, thereby increasing the biocompatibility of the nHA–rGO composite.     

Molecular dynamics simulation of mechanical performance of graphene/graphene oxide paper based polymer composites

Highly ordered polymer composites of layered graphene/graphene oxide (GO) sheets, i.e. graphene/GO paper, are attractive candidates for novel structural and functional applications. Here, molecular dynamics simulations are employed to elucidate the structural and mechanical properties of the graphene/GO paper based polymer composites. We find that the large scale properties of these composites are controlled by the conformation and content of polymer molecules within the interlayer galleries. Polymer conformations affect the interlayer spacing, while the polymer content controls the layer–matrix interactions, thereby affecting the elastic modulus of the composites. Additionally, the chemical composition of individual GO sheets also plays a critical role in establishing the mechanical properties of the composites. Specifically, a higher density of oxygen-containing groups leads to the decrease of elastic modulus of individual GO sheets. However, the groups also lead to the increased hydrogen bonds between the GO sheets and polymer molecules, resulting in the corresponding increase in overall stiffness. Our studies suggest the possibility of tuning the properties of graphene/GO paper composites by altering the conformation and content of polymer, as well as the density of functional groups on individual GO sheets.     

Effects of substitution for carbon black with graphene oxide or graphene on the morphology and performance of natural rubber/carbon black composites

In this study, nanosheets including graphene oxide (GO) and reduced graphene oxide (rGO), were incorporated into natural rubber (NR), to study the effects of substituting GO or rGO for carbon black (CB) on the structure and performance of NR/CB composites. The morphological observations revealed the dispersion of CB was improved by partially substituting nanosheets for CB. The improvements in static and dynamic mechanical properties were achieved at small substitution content of GO or rGO nanosheets. With substitution of rGO nanosheets, significant improvement in flex cracking resistance was achieved. NR/CB/rGO (NRG) composites has a much lower heat build‐up value compared with NR/CB/GO (NG) composites at a high load of nanosheets. However, both GO and rGO tended to aggregate at a high concentration, which led to the poor efficiency on enhancing the dynamic properties, or even deteriorate the performance of rubber composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41832.     

The reduction of graphene oxide

Graphene has attracted great interest for its excellent mechanical, electrical, thermal and optical properties. It can be produced by micro-mechanical exfoliation of highly ordered pyrolytic graphite, epitaxial growth, chemical vapor deposition, and the reduction of graphene oxide (GO). The first three methods can produce graphene with a relatively perfect structure and excellent properties, while in comparison, GO has two important characteristics: (1) it can be produced using inexpensive graphite as raw material by cost-effective chemical methods with a high yield, and (2) it is highly hydrophilic and can form stable aqueous colloids to facilitate the assembly of macroscopic structures by simple and cheap solution processes, both of which are important to the large-scale uses of graphene. A key topic in the research and applications of GO is the reduction, which partly restores the structure and properties of graphene. Different reduction processes result in different properties of reduced GO (rGO), which in turn affect the final performance of materials or devices composed of rGO. In this contribution, we review the state-of-art status of the reduction of GO on both techniques and mechanisms. The development in this field will speed the applications of graphene.     

聚偏氟乙烯/石墨烯复合材料的制备及性能研究

用溶液共混法制备出聚偏氟乙烯/氧化石墨烯复合材料(PVDF/GO),经高温热压将GO还原得到聚偏氟乙烯/还原氧化石墨烯复合材料(PVDF/rGO)。研究了填料种类及含量对复合材料电学性能、热稳定性和力学性能的影响。结果表明：随GO和rGO的添加,两种复合材料的介电常数(ε _r)均变大、介电损耗(tanδ)变化不大;低含量下GO和rGO均能提高PVDF的热稳定性,但rGO对PVDF性能的改善效果更好;随填料含量从0增加到8%(质量),100 Hz下PVDF/rGO复合材料的ε _r从3.60增加到38.30,PVDF/rGO[4%(质量)]复合材料失重率为5%的分解温度较纯PVDF提高了6.44℃。rGO增强了PVDF的刚性,PVDF/rGO复合材料的拉伸强度先增大后减小,杨氏模量逐渐增大,当rGO含量为4%(质量)时拉伸强度最大,拉伸强度和弹性模量分别较纯PVDF提高了35.30%、22.58%。但GO和rGO都降低了复合材料的击穿场强。     

Preparation of Ag/reduced graphene oxide reinforced copper matrix composites through spark plasma sintering: An investigation of microstructure and mechanical properties

The reduced graphene oxide (rGO) decorated with Ag nanoparticles was synthesized by the chemical reduction of graphene oxide in an aqueous solution containing AgNO₃, in the presence of hydrazine hydrate as a reducing agent. The reduction of graphene oxide was confirmed by FT-IR and raman spectroscopy analyses. The x-ray diffraction pattern and UV–visible investigations demonstrated the formation of Ag particles on the surface of rGO sheets. After successful decoration, the Ag/rGO nano-composite was used as the reinforcement in the copper matrix composite. Cu–Ag/rGO composites with different percentages of Ag/rGO (0.4, 0.8, 1.6 and 3.2 vol%.) were prepared by mechanical milling and spark plasma sintering (SPS). The effects of the Ag/rGO content on the consolidation process, micro-hardness, bending strength and also, fracture surface of the prepared samples were then investigated. The three-point bending strength of the sintered samples was increased from 285 to 472 MPa by the addition 0.8 vol%. of Ag/rGO, as compared to the pure Cu. Moreover, increasing the reinforcement content to the 3.2 vol%. Ag/rGO led to decreasing the bending strength to 433 MPa. The highest micro-hardness (81 Hv) was obtained for the composite sample containing the 1.6 vol%. Ag/rGO. By increasing Ag/r-GO as the reinforcement (3.2 vol%.), the Vickers hardness was decreased to 69 Hv. Also, investigation of the fracture surface morphology showed transformation of fracture mechanism from plastic changes to brittle ones by raising the Ag/rGO content volume from 0.8 to 1.6 vol %.     

Mechanical,thermal conductive,and dielectric properties of fluoroelastomer/reduced graphene oxide composites in situ prepared by solvent thermal reduction

Fluoroelastomer (FKM)/reduced graphene oxide (rGO) composites are in situ prepared by solvent thermal reduction method in N,N‐dimethylformamide (DMF) solution. The reduction of graphene oxide (GO) is characterized by X‐Ray photoelectron (XPS), ultraviolet–visible (UV–vis), and Fourier transform infrared (FTIR) spectra. GO and rGO are both efficient fillers to improve the mechanical properties of FKM. The dispersibility of rGO is improved after solvent thermal reduction which is confirmed by scanning electron micrograph (SEM) and X‐ray diffraction (XRD). The homogenous suspension of FKM/rGO composites in DMF can stay stable for more than a month. The dielectric permittivity of FKM/rGO (5 phr) is 26.4 at the frequency of 10⁻¹ Hz, higher than the pure FKM (8.1). The thermal conductivity of rGO/FKM composites increases. POLYM. COMPOS., 35:1779–1785, 2014. © 2013 Society of Plastics Engineers     

Progression from Graphene and Graphene Oxide to High Performance Polymer-Based Nanocomposite: A Review

In this article, various types of carbon nanofiller and modification of graphene oxide and graphene for the preparation of polymer-based nanocomposites are reviewed. Recently, polymer/graphene and graphene oxide-based materials have attracted tremendous interest due to high performance even at low filler content. The property enhancement is due to the high aspect ratio, high surface area and excellent electrical, thermal and mechanical properties of nanofiller. Different techniques have been employed to fabricate polymer/graphene and graphene oxide nanocomposite with uniform dispersion due to fine matrix/nanofiller interaction. Here we discuss the structure, properties and preparation of these nanocomposites.