DNAzyme molecular beacon probes for target-induced signal-amplifying colorimetric detection of nucleic acids

A novel DNAzyme molecular beacon (DNAzymeMB) strategy was developed for target-induced signal-amplifying colorimetric detection of target nucleic acids. The DNAzymeMB, which exhibits peroxidase activity in its free hairpin structure, was engineered to form a catalytically inactive hybrid through hybridization with a blocker DNA. The presence of target DNA leads to dissociation of the DNAzymeMB from the inactive hybrid through hybridization with the blocker DNA. This process results in recovery of the catalytically active DNAzymeMB, which can catalyze a colorimetric reaction that signals the presence of the target DNA. In addition, a primer was rationally designed to anneal to the blocker DNA of the blocker/target DNA duplex and displace the bound target DNA during the extension reaction. The released target DNA triggers the next cycle involving hybridization with blocker DNA, DNAzymeMB dissociation, primer extension, and target displacement. This unique amplifying strategy leads to the generation of multiple numbers of active DNAzymeMB molecules from a single target molecule and gives a detection limit down to 1 pM, a value that is nearly 3 or 5 orders of magnitude lower than those of previously reported DNAzyme molecular beacon-based DNA detection methods.     

Amplified detection of DNA through the enzyme-free autonomous assembly of hemin/G-quadruplex DNAzyme nanowires

An enzyme-free amplified detection platform is described using the horseradish peroxidase (HRP)-mimicking DNAzyme as an amplifying label. Two hairpin structures that include three-fourths and one-fourth of the HRP-mimicking DNAzyme in caged, inactive configurations are used as functional elements for the amplified detection of the target DNA. In the presence of the analyte DNA, one of the hairpins is opened, and this triggers the autonomous cross-opening of the two hairpins using the strand displacement principle. This leads to the formation of nanowires consisting of the HRP-mimicking DNAzyme. The resulting DNA nanowires act as catalytic labels for the colorimetric or chemiluminescent readout of the sensing processes (the term "enzyme-free" refers to a protein-free catalyst). The analytical platform allows the sensing of the analyte DNA with a detection limit corresponding to 1 × 10(-13) M. The optimized system acts as a versatile sensing platform, and by coaddition of a "helper" hairpin structure any DNA sequence may be analyzed by the system. This is exemplified with the detection of the BRCA1 oncogene with a detection limit of 1 × 10(-13) M.     

DNA Sensors and Aptasensors Based on the Hemin/G‐quadruplex‐Controlled Aggregation of Au NPs in the Presence of L‐Cysteine

L‐cysteine induces the aggregation of Au nanoparticles (NPs), resulting in a color transition from red to blue due to interparticle plasmonic coupling in the aggregated structure. The hemin/G‐quadruplex horseradish peroxidase‐mimicking DNAzyme catalyzes the aerobic oxidation of L‐cysteine to cystine, a process that inhibits the aggregation of the NPs. The degree of inhibition of the aggregation process is controlled by the concentration of the DNAzyme in the system. These functions are implemented to develop sensing platforms for the detection of a target DNA, for the analysis of aptamer‐substrate complexes, and for the analysis of L‐cysteine in human urine samples. A hairpin DNA structure that includes a recognition site for the DNA analyte and a caged G‐quadruplex sequence, is opened in the presence of the target DNA. The resulting self‐assembled hemin/G‐quadruplex acts as catalyst that controls the aggregation of the Au NPs. Also, the thrombin‐binding aptamer folds into a G‐quadruplex nanostructure upon binding to thrombin. The association of hemin to the resulting G‐quadruplex aptamer‐thrombin complex leads to a catalytic label that controls the L‐cysteine‐mediated aggregation of the Au NPs. The hemin/G‐qaudruplex‐controlled aggregation of Au NPs process is further implemented for visual and spectroscopic detection of L‐cysteine concentration in urine samples.     

Triggered polycatenated DNA scaffolds for DNA sensors and aptasensors by a combination of rolling circle amplification and DNAzyme amplification

The concept of triggered polycatenated DNA scaffolds has been elegantly introduced into ultrasensitive biosensing applications by a combination of rolling circle amplification (RCA) and DNAzyme amplification. As compared to traditional methods in which one target could only initiate the formation of one circular template for RCA reaction, in the present study two species of linear single-stranded DNA (ssDNA) monomers are self-assembled into mechanically interlocked polycatenated nanostructures on capture probe-tagged magnetic nanoparticles (MNPs) only upon the introduction of one base mutant DNA sequence as initiator for single-nucleotide polymorphisms (SNPs) analysis. The resultant topologically polycatenated DNA ladder is further available for RCA process by using the serially ligated circular DNA as template for the synthesis of hemin/G-quadruplex HRP-mimicking DNAzyme chains, which act as biocatalytic labels for the luminol-H(2)O(2) chemiluminescence (CL) system. Notably, the problem of high background induced by excess hemin itself is circumvented by immobilizing the biotinylated RCA products on streptavidin-modified MNPs via biotin-streptavidin interaction. Similarly, a universal strategy is contrived by substitutedly employing aptamer as initiator for the construction of polycatenated DNA scaffolds to accomplish ultrasensitive detection of proteins based on structure-switching of aptamer upon target binding, which is demonstrated by using thrombin as a model analyte in this study. Overall, with two successive amplification steps and one magnetic separation procedure, this flexible biosensing system exhibits not only high sensitivity and specificity with the detection limits of SNPs and thrombin as low as 71 aM and 6.6 pM, respectively, but also excellent performance in real human serum assay with no PCR preamplification for SNPs assay. Given the unique and attractive characteristics, this study illustrates the potential of DNA nanotechnology in bioanalytical applications for both fundamental and practical research.     

Monitoring molecular beacon/DNA interactions using atomic force microscopy

The molecular beacon (MB) is a new fluorescence probe containing a single-stranded oligonucleotide with a probe sequence embedded in complementary sequences that form a hairpin stem. Due to the inherent fluorescent signal transduction mechanism, an MB functions as a sensitive probe with a high signal-to-background ratio for real-time monitoring and provides a variety of exciting opportunities in DNA, RNA, and protein studies. To better understand the properties of MBs, the specific interactions between MB and target DNA (complementary and one-base mismatch) have been directly investigated by atomic force microscopy. The interaction force between a linear DNA probe and the target DNA was also detected and compared to that between MB and target DNA. The results demonstrate the high specificity of the MB/target DNA compared to the linear DNA/target DNA interaction.     

Colorimetric and ultrasensitive bioassay based on a dual-amplification system using aptamer and DNAzyme

Rapid detection of ultralow amount of biomarkers in a biologically complex mixture remains a major challenge. Herein, we report a novel aptamer-based protein detection assay that integrates two signal amplification processes, namely, polymerase-mediated rolling-circle amplification (RCA) and DNA enzyme-catalyzed colorimetric reaction. The target biomarker is captured in a sandwich assay by primary aptamer-functionalized microbeads (MBs) and a secondary aptamer that is connected to a RCA primer/circular template complex. RCA reaction, which amplifies the single biomarker binding events by a factor of hundreds to thousands (the first amplification) produces a long DNA molecule containing multiple DNAzyme units. The peroxidase-like DNAzyme catalyzes the oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (the second amplification), which generates a blue-green colorimetric signal. This new biosensing platform permits the ultrasensitive, label-free, colorimetric detection of biomarker in real time. Using platelet-derived growth factor B-chain (PDGF-BB) as a model system, we demonstrated that our assay can detect a protein marker specifically in a serum-containing medium, at a concentration as low as 0.2 pg/mL in ～2 h, which rivals traditional assays such as ELISA. We anticipate this simple methodology for biomarker detection can find utility in point-of-care applications.     

Design of a room-temperature phosphorescence-based molecular beacon for highly sensitive detection of nucleic acids in biological fluids

Ultrasensitive fluorescent analysis or monitoring of significant molecules in complex samples is important for many biological studies, clinical diagnosis, and forensic investigations, the major obstacle for which is the background signals from ubiquitous endogenous fluorescent components of the environments. Herein, a room-temperature phosphorescence (RTP)-based molecular beacon (MB), employing a Eu(3+) complex of chlorosulfonylated tetradentate β-diketone (L) and the quencher BHQ-2, was engineered for highly sensitive detection of DNA sequences in biological fluids. Complexation of Eu(3+) with the ligand L formed a strongly luminescent complex EuL(2). But when EuL(2) and BHQ-2 were labeled to two ends of a DNA molecule with hairpin structure, the luminescence of EuL(2) was quenched by BHQ-2 due to the stem-closed conformation of the beacon. Due to very low background luminescence from the probe molecule, >200-fold signal enhancement was achieved when nanomolar target sequence was introduced. This sensitivity is about 20-fold higher than the level achieved with conventional fluorescence-based molecular beacons. Furthermore, because the Eu(3+) complex has a much longer luminescence lifetime (≈0.8 ms) than that of the background (<10 ns), RTP measurements were used to directly detect as low as 500 pM DNA in cell media quantitatively without any sample pretreatment.     

Amplified surface plasmon resonance and electrochemical detection of Pb2+ ions using the Pb2+-dependent DNAzyme and hemin/G-quadruplex as a label

The hemin/G-quadruplex nanostructure and the Pb(2+)-dependent DNAzyme are implemented to develop sensitive surface plasmon resonance (SPR) and electrochemical sensing platforms for Pb(2+) ions. A complex consisting of the Pb(2+)-dependent DNAzyme sequence and a ribonuclease-containing nucleic acid sequence (corresponding to the substrate of the DNAzyme) linked to a G-rich domain, which is "caged" in the complex structure, is assembled on Au-coated glass surfaces or Au electrodes. In the presence of Pb(2+) ions, the Pb(2+)-dependent DNAzyme cleaves the substrate, leading to the separation of the complex and to the self-assembly of the hemin/G-quadruplex on the Au support. In one sensing platform, the Pb(2+) ions are analyzed by following the dielectric changes at the surface as a result of the formation of the hemin/G-quadruplex label using SPR. This sensing platform is further amplified by the immobilization of the sensing complex on Au NPs (13 nm) and using the electronic coupling between the NPs and the surface plasmon wave as an amplification mechanism. This method enables the sensing of Pb(2+) ions with a detection limit that corresponds to 5 fM. The second sensing platform implements the resulting hemin/G-quadruplex as an electrocatalytic label that catalyzes the electrochemical reduction of H(2)O(2). This method enables the detection of Pb(2+) with a detection limit of 1 pM. Both sensing platforms reveal selectivity toward the detection of Pb(2+) ions.     

Sensitive and homogeneous protein detection based on target-triggered aptamer hairpin switch and nicking enzyme assisted fluorescence signal amplification

Specific and sensitive detection of proteins in biotechnological applications and medical diagnostics is one of the most important goals for the scientific community. In this study, a new protein assay is developed on the basis of hairpin probe and nicking enzyme assisted signal amplification strategy. The metastable state hairpin probe with short loop and long stem is designed to contain a protein aptamer for target recognition. A short Black Hole Quencher (BHQ)-quenching fluorescence DNA probe (BQF probe) carrying the recognition sequence and cleavage site for the nicking enzyme is employed for fluorescence detection. Introduction of target protein into the assay leads to the formation change of hairpin probe from hairpin shape to open form, thus faciliating the hybridization between the hairpin probe and BQF probe. The fluorescence signal is amplified through continuous enzyme cleavage. Thrombin is used as model analyte in the current proof-of-concept experiments. This method can detect thrombin specifically with a detection limit as low as 100 pM. Additionally, the proposed protein detection strategy can achieve separation-free measurement, thus eliminating the washing steps. Moreover, it is potentially universal because hairpin probe can be easily designed for other proteins by changing the corresponding aptamer sequence.     

Fluorescence detection of DNA, adenosine-5'-triphosphate (ATP), and telomerase activity by zinc(II)-protoporphyrin IX/G-quadruplex labels

The zinc(II)-protoporphyrin IX (ZnPPIX) fluorophore binds to G-quadruplexes, and this results in the enhanced fluorescence of the fluorophore. This property enabled the development of DNA sensors, aptasensors, and a sensor following telomerase activity. The DNA sensor is based on the design of a hairpin structure that includes a "caged" inactive G-quadruplex sequence. Upon opening the hairpin by the analyte DNA, the resulting fluorescence of the ZnPPIX/G-quadruplex provides the readout signal for the sensing event (detection limit 5 nM). Addition of Exonuclease III to the system allows the recycling of the analyte and its amplified analysis (detection limit, 200 pM). The association of the ZnPPIX to G-quadruplex aptamer-substrate complexes allowed the detection of adenosine-5'-triphosphate (ATP, detection limit 10 μM). Finally, the association of ZnPPIX to the G-quadruplex repeat units of telomers allowed the detection of telomerase activity originating from 380 ± 20 cancer 293T cell extract.     

General colorimetric detection of proteins and small molecules based on cyclic enzymatic signal amplification and hairpin aptamer probe

In this work, we developed a simple and general method for highly sensitive detection of proteins and small molecules based on cyclic enzymatic signal amplification (CESA) and hairpin aptamer probe. Our detection system consists of a hairpin aptamer probe, a linker DNA, two sets of DNA-modified AuNPs, and nicking endonuclease (NEase). In the absence of a target, the hairpin aptamer probe and linker DNA can stably coexist in solution. Then, the linker DNA can assemble two sets of DNA-modified AuNPs, inducing the aggregation of AuNPs. However, in the presence of a target, the hairpin structure of aptamer probe is opened upon interaction with the target to form an aptamer probe-target complex. Then, the probe-target complex can hybridize to the linker DNA. Upon formation of the duplex, the NEase recognizes specific nucleotide sequence and cleaves the linker DNA into two fragments. After nicking, the released probe-target complex can hybridize with another intact linker DNA and the cycle starts anew. The cleaved fragments of linker DNA are not able to assemble two sets of DNA-modified AuNPs, thus a red color of separated AuNPs can be observed. Taking advantage of the AuNPs-based sensing technique, we are able to assay the target simply by UV-vis spectroscopy and even by the naked eye. Herein, we can detect the human thrombin with a detection limit of 50 pM and adenosine triphosphate (ATP) with a detection limit of 100 nM by the naked eye. This sensitivity is about 3 orders of magnitude higher than that of traditional AuNPs-based methods without amplification. In addition, this method is general since there is no requirement of the NEase recognition site in the aptamer sequence. Furthermore, we proved that the proposed method is capable of detecting the target in complicated biological samples.     

Nucleic acid-based fluorescence sensors for detecting proteins

We report here development of a rapid, homogeneous, aptamer-based fluorescence assay ("molecular beacons") for detecting proteins. The assay involves protein-induced coassociation of two aptamers recognizing two distinct epitopes of the protein. The aptamers contain short fluorophore-labeled complementary "signaling" oligonucleotides attached to the aptamer by non-DNA linker. Coassociation of the two aptamers with the protein results in bringing the two "signaling" oligonucleotides into proximity, producing a large change of fluorescence resonance energy transfer between the fluorophores. We used thrombin as a model system to provide proof-of-principle evidence validating this molecular beacon design. Thrombin beacon was capable of detecting the protein with high selectivity (also in complex biological mixtures), picomolar sensitivity, and high signal-to-background ratio. This is a homogeneous assay requiring no sample manipulation. Since the design of molecular beacons described here is not limited to any specific protein, it will be possible to develop these beacons to detect a variety of target proteins of biomedical importance.     

Folding equilibrium constants of telomere G-quadruplexes in free state or associated with proteins determined by isothermal differential hybridization

Guanine rich (G-rich) nucleic acids form G-quadruplex structures that are implicated in many biological processes, pharmaceutical applications, and molecular machinery. The folding equilibrium constant (K(F)) of the G-quadruplex not only determines its stability and competition against duplex formation in genomic DNA but also defines its recognition by proteins and drugs and technical specifications. The K(F) is most conveniently derived from thermal melting analysis that has so far yielded extremely diversified results for the human telomere G-quadruplex. Melting analysis cannot be used for nucleic acids associated with proteins, thus has difficulty to study how protein association affects the folding equilibrium of G-quadruplex structure. In this work, we established an isothermal differential hybridization (IDH) method that is able to determine the K(F) of G-quadruplex, either alone or associated with proteins. Using this method, we studied the folding equilibrium of the core sequence G(3)(T(2)AG(3))(3) from vertebrate telomere in K(+) and Na(+) solutions and how it is affected by proteins associated at its adjacent regions. Our results show that the K(F) obtained for the free G-quadruplex is within 1 order of magnitude of most of those obtained by melting analysis and protein binding beside a G-quadruplex can dramatically destabilize the G-quadruplex.     

Polyacrylamide gel film immobilized molecular beacon array for single nucleotide mismatch detection

We reported polyacrylamide gel immobilized molecular beacon array for single nucleotide mismatch detection in this paper. Molecular beacons are oligonucleotide probes fluorescing upon hybridization to their complementary DNA/RNA targets with excellent sensitivity and high selectivity. The specially designed molecular beacon for immobilization contains a 15 base loop sequence with a 5 base pair stem, a polyT (20 bases) spacer, a 5'-end amino group for immobilization, a fluorescein in the middle of the sequence as the fluorophore, and a 3'-end DABCYL as the quencher. Between the 5'-end amino group and the stem, the polyT is used to minimize disability caused by 5'-end immobilization. The molecular beacon microarray was fabricated by a pin-based spotting robot and the hybridization was investigated by confocal microscope. A real-time hybridization process at room temperature was registered every minute for 20 min after the target solution was pumped into the hybridization cell. The result indicates that a polyacrylamide film coated glass slide provides an ideal solution-like environment for molecular beacon probes. The potential applications of this kind of molecular beacon array are mutation detection, disease mechanisms, disease diagnostics, etc. in a parallel, cost saving, and label-free detection way.     

Ultrasensitive solution-phase electrochemical molecular beacon-based DNA detection with signal amplification by exonuclease III-assisted target recycling

Taking advantage of the preferential exodeoxyribonuclease activity of exonuclease III in combination with the difference in diffusivity between an oligonucleotide and a mononucleotide toward a negatively charged ITO electrode, a highly sensitive and selective electrochemical molecular beacon (eMB)-based DNA sensor has been developed. This sensor realizes electrochemical detection of DNA in a homogeneous solution, with sensing signals amplified by an exonuclease III-based target recycling strategy. A hairpin-shaped oligonucleotide containing the target DNA recognition sequence, with a methylene blue tag close to the 3' terminus, is designed as the signaling probe. Hybridization with the target DNA transforms the probe's exonuclease III-inactive protruding 3' terminus into an exonuclease III-active blunt end, triggering the digestion of the probe into mononucleotides including a methylene blue-labeled electro-active mononucleotide (eNT). The released eNT, due to its less negative charge and small size, diffuses easily to the negative ITO electrode, resulting in an increased electrochemical signal. Meanwhile, the intact target DNA returns freely to the solution and hybridizes with other probes, releasing multiple eNTs and thereby further amplifies the electrochemical signal. This new immobilization-free, signal-amplified electrochemical DNA detection strategy shows great potential to be integrated in portable and cost-effective DNA sensing devices.     

"Off-On" Electrochemical Hairpin-DNA-Based Genosensor for Cancer Diagnostics

A simple and robust "off-on" signaling genosensor platform with improved selectivity for single-nucleotide polymorphism (SNP) detection based on the electronic DNA hairpin molecular beacons has been developed. The DNA beacons were immobilized onto gold electrodes in their folded states through the alkanethiol linker at the 3'-end, while the 5'-end was labeled with a methylene blue (MB) redox probe. A typical "on-off" change of the electrochemical signal was observed upon hybridization of the 27-33 nucleotide (nt) long hairpin DNA to the target DNA, in agreement with all the hitherto published data. Truncation of the DNA hairpin beacons down to 20 nts provided improved genosensor selectivity for SNP and allowed switching of the electrochemical genosensor response from the on-off to the off-on mode. Switching was consistent with the variation in the mechanism of the electron transfer reaction between the electrode and the MB redox label, for the folded beacon being characteristic of the electrochemistry of adsorbed species, while for the "open" duplex structure being formally controlled by the diffusion of the redox label within the adsorbate layer. The relative current intensities of both processes were governed by the length of the formed DNA duplex, potential scan rate, and apparent diffusion coefficient of the redox species. The off-on genosensor design used for detection of a cancer biomarker TP53 gene sequence favored discrimination between the healthy and SNP-containing DNA sequences, which was particularly pronounced at short hybridization times.     

Efficient fluorescence turn-on probe for zirconium via a target-triggered DNA molecular beacon strategy

It is well-known that Zr(4+) could selectively bind with two phosphate-functionalized molecules through a coordinate covalent interaction to form a sandwich-structured complex (-PO(3)(2-)-Zr(4+)-PO(3)(2-)-). In this paper, we for the first time converted such interaction into fluorescence sensing systems for Zr(4+) via a target-triggered DNA molecular beacon strategy. In the new designed sensing system, two phosphorylated and pyrene-labeled oligonucleotides were chosen as both recognition and reporter units, which will be linked by target Zr(4+) to form a hairpin structure and bring the two labeled pyrene molecules into close proximity, resulting in a "turn-on" excimer fluorescence signal. Moreover, γ-cyclodextrin was introduced to afford an amplified fluorescence signal and, therefore, provided an improved sensitivity for the target Zr(4+). This allows detection of Zr(4+) with high sensitivity (limit of detection, LOD = 200 nM) and excellent selectivity. The proposed sensing system has also been used for detection of Zr(4+) in river water samples with satisfactory result.     

DNA-based hybridization chain reaction for amplified bioelectronic signal and ultrasensitive detection of proteins

This work reports a novel electrochemical immunoassay protocol with signal amplification for determination of proteins (human IgG here used as a model target analyte) at an ultralow concentration using DNA-based hybridization chain reaction (HCR). The immuno-HCR assay consists of magnetic immunosensing probes, nanogold-labeled signal probes conjugated with the DNA initiator strands, and two different hairpin DNA molecules. The signal is amplified by the labeled ferrocene on the hairpin probes. In the presence of target IgG, the sandwiched immunocomplex can be formed between the immobilized antibodies on the magnetic beads and the signal antibodies on the gold nanoparticles. The carried DNA initiator strands open the hairpin DNA structures in sequence and propagate a chain reaction of hybridization events between two alternating hairpins to form a nicked double-helix. Numerous ferrocene molecules are formed on the neighboring probe, each of which produces an electrochemical signal within the applied potentials. Under optimal conditions, the immuno-HCR assay presents good electrochemical responses for determination of target IgG at a concentration as low as 0.1 fg mL(-1). Importantly, the methodology can be further extended to the detection of other proteins or biomarkers.     

Verification of antiparallel G-quadruplex structure in human telomeres by using two-photon excitation fluorescence lifetime imaging microscopy of the 3,6-Bis(1-methyl-4-vinylpyridinium)carbazole diiodide molecule

Different G-quadruplex structures for the human telomeric sequence d(T2AG3)4 in vitro have been documented in the presence of sodium and potassium. Verification of the G-quadruplex structures in human telomeres in vivo is the main issue in establishing the biological function of the G-quadruplex structures in telomeres as well as the development of anticancer agents. Here we have applied two-photon excitation fluorescence lifetime imaging microscopy to measure the fluorescence lifetime of the BMVC molecule upon interaction with various DNA structures. The distinction in lifetime measured with submicrometer spatial resolution in two-photon excitation fluorescence lifetime imaging microscopy provides a powerful approach not only to verify the existence of the antiparallel G-quadruplex structure in human telomeres but also to map its localizations in metaphase chromosomes.     

Graphene-DNAzyme based biosensor for amplified fluorescence "turn-on" detection of Pb2+ with a high selectivity

On the basis of the remarkable difference in affinity of graphene (GO) with ssDNA containing a different number of bases in length, we for the first time report a GO-DNAzyme based biosensor for amplified fluorescence "turn-on" detection of Pb(2+). A FAM-labeled DNAzyme-substrate hybrid acted as both a molecular recognition module and signal reporter and GO as a superquencher. By taking advantage of the super fluorescence quenching efficiency of GO, our proposed biosensor exhibits a high sensitivity toward the target with a detection limit of 300 pM for Pb(2+), which is lower than previously reported for catalytic beacons. Moreover, with the choice of a classic Pb(2+)-dependent GR-5 DNAzyme instead of 8-17 DNAzyme as the catalytic unit, the newly designed sensing system also shows an obviously improved selectivity than previously reported methods. Moreover, the sensing system was used for the determination of Pb(2+) in river water samples with satisfying results.