Structural Characteristics of Pumpkin Pectin Extracted by Microwave Heating

Abstract: To improve extraction yield of pumpkin pectin, microwave heating was adopted in this study. Using hot acid extraction, pumpkin pectin yield decreased from 5.7% to 1.0% as pH increased from pH 1.0 to 2.0. At pH 2.5, no pectin was recovered from pumpkin flesh powder. After a pretreatment at pH 1.0 and 25 °C for 1 h, pumpkin powder was microwave‐extracted at 120 °C for 3 min resulting in 10.5% of pectin yield. However, premicrowave treatment at 60 °C for 20 min did not improve extraction yield. When microwave heating at 80 °C for 10 min was applied after premicrowave treatment, final pectin yield increased to 11.3%. When pH was adjusted to 2.0, the yield dropped to 7.7% under the same extraction conditions. Molecular shape and properties as well as chemical composition of pumpkin pectin were significantly affected depending on extraction methods. Galacturonic acid content (51% to 58%) of pumpkin pectin was lower than that detected in commercial acid‐extracted citrus pectin, while higher content of neutral sugars and acetyl esters existed in pumpkin pectin structure. Molecular weight (M_w) and intrinsic viscosity (η_w) determined for microwave‐extracted pumpkin pectins were substantially lower than acid‐extracted pectin, whereas polydispersity was greater. However, microwave‐extracted pectin at pH 2.0 had more than 5 times greater M_w than did the pectin extracted at pH 1.0. The η_w of microwave‐extracted pectin produced at pH 2.0 was almost twice that of other microwave‐extracted pectins, which were comparable to that of acid‐extracted pectin. These results indicate that extraction yield of pumpkin pectin would be improved by microwave extraction and different pectin structure and properties can be obtained compared to acid extraction. Practical Application: Pumpkin is a promising alternative source for pectin material. Pumpkin pectin has a unique chemical structure and physical properties, presumably providing different functional properties compared to conventional commercial pectin sources. Depending on the conditions to produce pumpkin pectin, diverse molecular structures can be obtained and utilized in various food applications.     

Utilisation Potential of Feijoa Fruit Wastes as Ingredients for Functional Foods

Feijoa fruits have high antioxidant activity as they contain significant concentrations of polyphenols (PPs), carotenoids and vitamins. This study evaluates the colour, pH, total soluble solids (TSS), pectin fibre content, total extractable PP content (TEPC) and total antioxidant activity of the extracts generated from the fruit wastes (primarily skin and some flesh) remaining after feijoa flesh consumption. Extractions were conducted at room temperature and 50 °C using accelerated solvent extraction technology and different extraction media [water, acidified water (containing citric acid, pH?3.5), and 30, 50 and 80 % (v/v) aqueous ethanol solutions]. Results show that the composition and properties of the extracts depend on the extraction media and, to a lesser extent, on the extraction temperature. The 80 % ethanolic extract was bright green in colour. The water and acidified water extracts showed more browning than the ethanolic extracts, suggesting possible detrimental sensory impacts for food applications. The TSS decreased in the order of 80, 50 and 30 % ethanolic and water extracts. The 50 % ethanolic extract had the highest TEPC and antioxidant activity at both extraction temperatures, which was supported by high performance liquid chromatography analyses. The extracts produced with solutions containing less ethanol, especially water extracts, had higher pectin contents. The UA content of the extract produced using water alone was the highest (5.56 % as GalA) at 20 °C, whilst that produced using 30 % ethanol solution was the highest (3.90 % as GalA) at 50 °C. Higher extraction temperature (50 °C) resulted in lower pectin contents. These results demonstrate the potential of feijoa waste extracts, especially 50 and 80 % ethanolic extracts, as ingredients for functional food applications.     

炮制法对三叶木通果皮果胶提取及理化性质的影响

为提高三叶木通果皮果胶提取率和质量,探究不同炮制方法对三叶木通果皮果胶提取及其理化性质的影响.以未处理的三叶木通果皮生粉和炒制、砂制、醋制、酒制方法处理的果皮粉为原料,酸法提取得到果胶并进行结构表征,测定其果胶提取率、半乳糖醛酸质量分数、酯化度、乳化活性、乳化稳定性及抗氧化性.结果表明:醋制果胶提取率、半乳糖醛酸质量分...     

Optimisation of pectin acid extraction from passion fruit peel (Passiflora edulis flavicarpa) using response surface methodology

Pectin was extracted from passion fruit peel using three different acids (citric, hydrochloric or nitric) at different temperatures (40–90 °C), pH (1.2–2.6) and extraction times (10–90 min), with and without skins using a 2⁴ factorial design. Temperature, pH and extraction time had highly significant effects on the pectin yield. A central composite design with face centring was used to optimise the extraction process conditions for citric acid without skins. Pectin yields varied from 10% to 70%. The optimal conditions for maximisation of pectin yield were the use of citric acid at 80 °C and pH 1 with an extraction time of 10 min considering model extrapolation.     

Extraction and characterization of a novel <Emphasis Type="Italic">Terminalia</Emphasis> pectin

This study reports the investigation into pectin present in Terminalia ferdinandiana—a native Australian fruit utilised in dietary supplement industry. Citric acid extraction was carried out to extract pectin from two commercially available T. ferdinandiana products—frozen puree and freeze-dried puree powder. The yields of the extracted pectin were measured at various pHs (2.0, 3.0 and 4.0) and times (30, 60 and 120 min) at 75 °C. Pectin yield ranged between 4.8 and 21%. Freeze-dried powder had a higher pectin yield compared to puree. Extraction at pH 3 for 120 min resulted in the highest yield from both puree (15%) and powder (21%). T. ferdinandiana pectins were found to have low methoxyl content with degree of esterification of 35.07 and 34.74% for puree and powder, respectively. Fourier transform infrared spectroscopy confirmed that the extracts were pectin.     

Application of high hydrostatic pressure and ultrasound-assisted extractions as a novel approach for pectin and polyphenols recovery from tomato peel waste

In this study, high hydrostatic pressure extraction (HHPE) and ultrasound-assisted extraction (UAE) were used for the improvement of pectin and polyphenol recovery from tomato peel waste.HHPE enhanced pectin recovery by 15% after 45 min of recycling, in comparison with the conventional extraction (CE) for 180 min. Similar mass fractions of anhydrouronic acid, total sugars and total phenols were obtained by using both methods. FTIR and ¹H NMR data confirmed that chemical composition of pectin obtained by HHPE and CE is identical, therefore it was concluded that the faster HHPE method can be used for its further isolation.Although depectinized residues subjected to UAE in 70% ethanol for 15 min contained two times lower values of total phenols (1625.7 mg/100 g) than pectinized samples (3643.9 mg/100 g), their quantities are not negligible, considering the fact that they are generated after HHPE. At the end of UAE, the residues were exploited as a source of fatty acids, among which lauric, palmitic and stearic acids are dominant.In conclusion, by shortening the extraction time using HHPE and UAE, it is possible to efficiently produce two valuable functional ingredients, pectin and polyphenols, and at the same time to reduce peel waste from tomato canning industry, which presents an environmental problem.Industrial relevanceUtilizing HHPE and UAE as novel and emerging technologies, and combining them with traditional ones (Soxhlet) is given the solution for sequential isolation of pectin, polyphenols and fatty acids from tomato peel waste, generated by canning factory.Shortening of extraction time using HHPE and UAE, it is possible to replace the conventional techniques, and achieve efficient production of pectin and polyphenols.Overall, the extraction methodology proposed in this work could provide two valuable benefits, i.e. the producers could find mode for decreasing of disposal costs of waste and consumer would take opportunity that isolated compounds could be reintroduced into food.     

低糖荔枝果酱工艺优化研究

研究低甲氧基果胶(LMP)质量分数、氯化钙质量分数、柠檬酸质量分数和果冻粉质量分数对低糖荔枝果酱品质的影响,并采用响应曲面法进行工艺优化。结果表明:低糖荔枝果酱最优工艺条件为低甲氧基果胶质量分数0.71%、氯化钙质量分数0.052%、柠檬酸质量分数0.48%和果冻粉质量分数0.15%。在此优化条件下制备的低糖荔枝果酱感官评分实测值为14.6,与预测值(14.7)接近;产品可溶性固形物含量44.8%、总酸度0.65%、黏度3.382Pa·s、硬度3.35N,具有酸甜适口、口感细腻润滑的特点。     

响应面优化提取血柚皮果胶的工艺研究

采用响应面法优化了血柚皮果胶的提取工艺,在单因素实验基础上,选取柠檬酸浓度、提取温度、液料比和提取时间为自变量,果胶得率为响应值,根据Box-Behnken实验设计方法,对提取血柚皮果胶的关键因素参数进行了优化,建立了血柚皮果胶得率的数学模型。结果表明:四个因素对血柚皮果胶得率的影响大小依次为提取温度>柠檬酸浓度>液料比>提取时间;血柚皮果胶提取的最佳工艺参数为:柠檬酸浓度1.5%,提取温度82℃、液料比32∶1m L/g、提取时间99min。在此条件下,血柚皮果胶得率达18.85%,与预测值仅相差0.32%,验证了数学模型的有效性。      

Spray-Drying of Antioxidant-Rich Blueberry Waste Extracts; Interplay Between Waste Pretreatments and Spray-Drying Process

This study aimed to establish an efficient route for converting blueberry waste material (BWM) into antioxidant-rich powders. Extracts were produced from BWM by an aqueous method using water acidified with citric acid, in the absence or presence of Pectinex Ultra SP-L and Cellubrix. All BWM extracts contained antioxidants including phenolic acids, anthocyanins, and flavonoids (total phenolic content (TPC) 3655–4369 mg gallic acid equivalent (GAE) and total anthocyanin content (TAC) 219–296 mg cyanidin-3-glucoside equivalents (CyGE) per 100 g dry extract). Extractions at 50 °C yielded higher TPC and TAC but lower vitamin C and pectin contents than extractions at 20 °C. Spray-drying BWM extracts produced at 50 °C (no enzymatic treatments) and an encapsulant (alginate or inulin) at an inlet temperature 150 °C and feed temperature 50 °C yielded powders with desired dark purplish blue color, water activity (0.25–0.33), flowability, reconstitution time (23–46 s in water or milk), TPC (25–30 mg GAE/g), TAC (17–20 mg CyGE/g), storage stability, and Bifidobacterium-boosting properties. Enzymatic pretreatments of BWM did not confer any advantages in preserving antioxidants in powder products, suggesting that some intrinsic BWM components (e.g., pectins) may play an important role in the encapsulating process. The use of alginate as the encapsulant/drying aid afforded higher powder yields, superior protection of antioxidants, better stability over a prolonged storage or elevated temperature storage, greater retention of TPC/TAC under simulated gastrointestinal conditions, and greater Bifidobacterium-boosting effects, compared to powders prepared using inulin. Thus, simple aqueous extraction methods and spray-drying technology hold enormous promise for producing antioxidant-rich powders from blueberry processing by-products or waste.     

High hydrostatic pressure assisted extraction of pectin from sugar beet pulp

This study aimed to investigate the effect of high hydrostatic pressure assisted extraction (HHPE) (250, 350 and 450 MPa at 40 °C for 5 min with/without acid addition) of pectin from sugar beet pulp and compare its properties with pectin obtained from conventional extraction (CE). Degree of esterification (DE), galacturonic acid (Gal-A) content, Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) relaxometry experiments were performed on the obtained pectin powder. HHPE (12.23 ± 0.13%) doubled extraction yield compared to CE (6.43 ± 0.07%). Also, HHPE and acid addition were found to have a synergetic effect on the extraction. HHPE resulted in degradations in the polymer structure and reduced Gal-A content and DE. Pectin extracted with both methods was classified as low methoxyl pectin (LMP). According to the NMR Relaxometry results, HHPE decreased water holding capacity (WHC). In brief, HHP was shown to increase the pectin extraction yield and no changes in viscosity were observed at the concentrations studied (2 g/L).     

Effect of extraction conditions on the yield and chemical properties of pectin from cocoa husks

Different extraction conditions were applied to investigate the effect of temperature, extraction time and substrate–extractant ratio on pectin extraction from cocoa husks. Pectin was extracted from cocoa husks using water, citric acid at pH 2.5 or 4.0, or hydrochloric acid at pH 2.5 or 4.0. Temperature, extraction time and substrate–extractant ratio affected the yields, uronic acid contents, degrees of methylation (DM) and degrees of acetylation (DA) of the extracted pectins using the five extractants differently. The yields and uronic acid contents of the extracted pectins ranged from 3.38–7.62% to 31.19–65.20%, respectively. The DM and DA of the extracted pectins ranged from 7.17–57.86% to 1.01–3.48%, respectively. The highest yield of pectin (7.62%) was obtained using citric acid at pH 2.5 [1:25 (w/v)] at 95 °C for 3.0 h. The highest uronic acid content (65.20%) in the pectin was obtained using water [1:25 (w/v)] at 95 °C for 3.0 h.     

Optimisation of acid extraction of pectin from sweet potato residues by response surface methodology and its antiproliferation effect on cancer cells

The response surface methodology was employed to study the acid extraction of pectin from sweet potato residues. The effects of extraction temperature, extraction time, solution pH and liquid/solid ratio on yield and galacturonic acid content of pectin were investigated. Experimental data were fitted to quadratic polynomial models and analysed using appropriate statistical methods. The determined optimum conditions were extraction temperature 93 °C, extraction time 2.2 h, solution pH 1.7 and liquid/solid ratio (v/w) 30:1. Under these conditions, the experimental extraction yield and galacturonic acid content of pectin were 5.09% and 70.03% (w/w), which were in good agreement with predicted values, 5.08% and 69.40%, respectively. In addition, sweet potato pectin exhibited remarkable antiproliferation effects on human colon cancer cells HT‐29 and human breast cancer cells Bcap‐37 by 46.64% and 42.64% at 1.00 mg mL^?1 separately, indicating that it could potentially be used as a natural supplement in functional foods.     

超声辅助柠檬酸提取百香果果皮高酯果胶及其理化性质分析

为开发优质果胶资源,利用超声辅助柠檬酸法从百香果果皮中提取高酯果胶,采用单因素实验探讨了料液比、pH、提取时间、超声功率对果胶得率的影响,应用正交试验确定果胶的最优提取工艺,并对其理化性质进行比较分析。结果表明,提取过程中各因素对果胶得率的影响大小为：提取时间 > 料液比 > pH > 超声功率;最佳提取工艺为：料液比1：40（g/mL）、pH2.00、提取时间60 min、超声功率为180 W。该条件下百香果果皮果胶得率为13.07%。经理化性质测定,果胶干燥失重为5.92%、灰分含量为4.18%、酸不溶物含量为0.27%、pH为3.55、酯化度为72.32%,属于高酯化果胶。本研究结果可为百香果果皮果胶的工业化生产提供技术支撑。     

Husk Tomato (Physalis ixocarpa Brot.) Waste as a Promising Source of Pectin: Extraction and Physicochemical Characterization

Husk tomato (Physalis ixocarpa Brot. var. Rendidora) waste was evaluated as a source of specialized pectin, and pectin extracted from this waste was characterized physicochemically. Fruit was blanched for 10 or 15 min and extracted in 0.1 N HCl for 15 to 25 min. Extracted pectin was subjected to physicochemical analysis. For all extraction conditions, the percentage of anhydrogalacturonic acid exceeded 60%, indicating that husk tomato was a good source of pectin. The degree of esterification of pectin molecules was 63% to 91%. The amount of extracted pectin decreased with increasing extraction time. The apparent viscosity of husk tomato pectin showed the characteristic behavior of pseudoplastic fluids. Neutral sugars were identified, and the amounts of 6 sugars (fucose, rhamnose, arabinose, galactose, glucose, and xylose) were quantified. Sugars identified in husk tomato pectin and present in the Rhamnogalacturonan I region, arabinose, galactose, and rhamnose suggest a highly branched structure, which will influence its future applications. Molecular weight values were 542 to 699 kDa, exceeding molecular weight values reported for commercial citrus pectins from 134 to 480 kDa. The extraction process significantly (P < 0.05) influenced the physicochemical properties of pectin. Up to 19.8% from the total amount of pectin in the husk tomato was extracted by 10 min of blanching and 20 min of a more heat treatment. Our findings indicate that husk tomato can be a good alternative source of pectin having highly distinctive physicochemical characteristics.     

The antioxidant capacity of polysaccharide from Laminaria japonica by citric acid extraction

An optimal citric acid extraction condition (pH 2.0; extraction temperature: 120 °C; extraction time: 3 h) was developed to obtain polysaccharide from Laminaria japonica. The yield of polysaccharide was 13.31 ± 0.08%, with IC₅₀ value of DPPH radical scavenging activity of 0.98 ± 0.01 mg mL^?1. The viscosity of polysaccharide extracted by citric acid (LJPA) was eight times lower than that of polysaccharide extracted by hot water (LJPW), which may be attributed to the low average molecular weight of LJPA (17.12 kDa). Gas chromatography analysis indicated that LJPA was composed of rhamnose, fucose, xylose, manose, glucose and galactose with relative molar percentages of 4.51%, 20.27%, 12.43%, 12.81%, 10.29% and 39.69% respectively. Furthermore, LJPA exhibited significantly higher antioxidant capacities including oxygen radical absorbance capacity (ORAC), ABTS radical scavenging activity and reducing power than LJPW. Citric acid extraction showed a positive influence on the polysaccharide degradation and antioxidant capacities of L. japonica.     

Characterisation of dragon fruit peel pectin extracted with natural deep eutectic solvent and sequential microwave-ultrasound-assisted approach

In this research, the physicochemical characteristics (proximate and chemical compositions, monosaccharides profiles, chemical structures, antioxidant activities and rheological properties) of dragon fruit peel pectin extracted with the solvent system of choline chloride-glucose-water (5:2:5) and sequential microwave-ultrasound-assisted approach (PC-MUAE), were evaluated, and then compared with those of the commercial pectin and other products from various extraction methods. No remarkable differences in the FTIR spectra of the commercial and extracted samples were observed, leading to the fact that the derived polysaccharides were pectin. The commercial pectin possessed a bright-yellow colour, while extracted pectin was yellow to brownish. Moreover, the facade of the latter under SEM was rough with miniature heterogeneous fragments. PC-MUAE was categorised as high methoxyl pectin with the degree of esterification of 59.76% and as a pseudoplastic substance with neutral pH (6.42), average level of solubility (73.90%), high equivalent weight (680.6 g mol⁻¹), high molecular weight (5.05 × 10⁵ Da), high antioxidant activities (total phenolic content of 8.14 mg of gallic acid equivalent/g pectin and 2,2-Diphenyl-1-picrylhydrazyl free radical scavenging capacity of 2.41 µmol Trolox equivalent/g pectin) and high viscosity at all tested domains of shear rate as compared with those of the commercial product and others from various methods. The anhydrouronic acid content of PC-MUAE was 64.28%, approximately to the minimum level (65%) proposed by FAO and EU. There were arabinose, galactose, glucose, mannose, rhamnose and xylose detected in extracted pectin. Consequently, PC-MUAE has the potential characteristics of high methoxyl pectin for the food industries.     

Extraction and characterization of pectin from cacao pod husks (Theobroma cacao L.) with citric acid

Variables that influence the citric-acid extraction of pectins from cacao pod husk were examined. A screening study tested the main parameters influencing pectin yield and uronic acid content by a factorial fractional 3^3?1 design. Further, response surface methodology was applied using a central composite design to examine the effect of a greater region of variable values on pectin yield and uronic acid content. The yield was optimized by increasing the temperature and time. None of the variables had a significant effect on the uronic acid content, and there was lack of fit of the model to the uronic acid content. From the fitted model, extraction conditions with aqueous citric acid at pH 3.0 for 95 min at 95 °C provided a predicted yield of approximately 9.0 g/100 g dry cacao pod husks. The obtained experimental value for the yield was 10.1 ± 0.3 g/100 g dry cacao pod husks, with the pectins containing 65.1 ± 0.8 g uronic acid/100 g fraction, DE 40.3% and DA 15.9%. At 5 g/100 g aqueous solution, the fraction behaved as a concentrated solution and presented a non-Newtonian shear-thinning behavior, well described by Cross Model. Additionally, the fraction formed gels at acidic pH and high sucrose content.     

Short‐chain fatty acid content in the hindgut of rats fed various composite foods and commercial dietary fibre fractions from similar sources

The fermentability of indigestible carbohydrates and content of short‐chain fatty acids along the hindgut of rats were investigated using plant materials of importance in the Swedish diet (instant potato powder, apples and oat flakes). Results with the composite food products were compared with commercial fibre fractions obtained from similar sources, ie potato fibre, apple pectin and β‐glucan‐enriched oat fibre. The materials were incorporated into diets yielding a concentration of 60 or 70 g kg^?1 indigestible carbohydrates. The fermentability of indigestible carbohydrates was high with all diets, between 79 and 90%. All substrates except the pure apple pectin generated intermediate to high proportions of butyric acid in the caecum (15–22 vs 8%). The potato products gave high concentrations of butyric acid in the distal colon. The potato powder, ie the diet with the highest content of resistant starch (22 g kg^?1), also gave the highest proportion of butyric acid in the distal colon (19%), which was higher than the proportion in the caecum with the same substrate (15%) (P < 0.005). The composite foods promoted a higher proportion of butyric acid in the distal colon as compared with the commercial fibre fractions (P < 0.05). © 2002 Society of Chemical Industry     

Effects of Anti-browning Combinations of Ascorbic Acid, Citric Acid, Nitrogen and Carbon Dioxide on the Quality of Banana Smoothies

The effects of 0.2 % ascorbic acid?+?0.2 % citric acid (AA?+?CA), 0.2 % ascorbic acid?+?0.2 % citric acid?+?N₂ (AA?+?CA?+?N₂) and 0.2 % ascorbic acid?+?0.2 % citric acid?+?CO₂ (AA?+?CA?+?CO₂) on the quality of banana smoothies were investigated. An obvious anti-browning effect was observed after each treatment, which resulted from a significant decrease in the polyphenol oxidase activity (p?<?0.05) and the exclusion of oxygen by infusion with inert N₂ or CO₂. The AA?+?CA?+?N₂ treatment exhibited the lowest change of browning index (ΔBI) indicating the best anti-browning effect on the banana smoothies. Compared with the Herschel–Bulkley model, the Power Law was less complex and more suitable for describing the rheological properties of the banana smoothies. AA?+?CA, AA?+?CA?+?N₂ and AA?+?CA?+?CO₂ treatments all significantly increased the pectin methylesterase activity of the banana smoothies (p?<?0.05). The AA?+?CA treatment increased the cumulative volume of the larger particles in the banana smoothies. The viscosity of the banana smoothies decreased after the three different treatments. In terms of the comprehensive results, the inclusion of AA?+?CA?+?N₂ in the production of banana smoothies was the best processing method applied.     

Extraction of pectin from passion fruit peel using moderate electric field and conventional heating extraction methods

Yellow passion fruit peel contains a high level of pectin that can be extracted from cell walls of plants. Direct boiling is a conventional method of extraction, which takes around 2 h to obtain a good yield of pectin. The long period of heating can produce degradation in the pectin, when the conventional heating is used to extract the pectin a lot of time and energy is spent. The purpose of this study was to explore the conventional and the moderate electric field extractions of pectin from passion fruit peel. The comparison of galacturonic acid content and esterification degree of the pectin obtained by different extraction methods indicated that similar values were obtained. Furthermore, moderate electric field is an efficient, timesaving, and eco-friendly method for the extraction of pectin from passion fruit peel, especially for pectin with a high esterification degree and galacturonic acid content higher than 65%.Industrial relevanceThis information is important for food industry since direct boiling, that is a conventional method of extraction, takes around 2 h to obtain a good yield of pectin and uses strong acid solutions. Also, today, this information which shows much interest in the food industry.