Synthesis and characterization of polymers from β-propiolactone and poly(ethylene glycol)s

Uncatalysed polymerizations of β-propiolactone with low-molecular-weight poly(ethylene glycol)s were carried out in bulk, at temperatures in the range of 70 to 120°C. ¹H nuclear magnetic resonance (n.m.r.) and differential scanning calorimetry (d.s.c.) measurements on the resulting products indicated a block copolymer structure. Gel permeation chromatography (g.p.c.) and d.s.c. analyses showed that in some cases the copolymerization is accompanied by homopolymerization of β-propiolactone, probably due to the presence of residual water in the poly(ethylene glycol). N.m.r. and infra-red (i.r.) spectra of copolymers revealed the presence of hydroxyl and carboxyl end groups. The copolymerization reaction may be visualized as a two-step process, in which the ring opening of β-propiolactone takes place on both the hydroxyl groups of poly(ethylene glycol), followed by repetitive monomer addition forming an ester-ether-ester triblock copolymer.     

Synthesis and characterization of polyrotaxanes comprising α-cyclodextrins and poly(ε-caprolactone) end-capped with poly(N-isopropylacrylamide)s

Biodegradable polyrotaxane (PR)-based triblock copolymers were synthesized via the atom transfer radical polymerization (ATRP) of N-isopropylacrylamide (NIPAAm) initiated with polypseudorotaxanes (PPRs) consisting of a distal 2-bromopropiomyl bromide end-capping poly(ε-caprolactone) (Br-PCL-Br) and a varying amount of α-cyclodextrins (α-CDs) in the presence of Cu(I)Br/PMDETA at 25 °C in aqueous solution. The copolymers were featured by relatively higher yields from 46.0% to 82.8% as compared with previous reports. Their structure was characterized in detail by using ¹H NMR, ¹³C CP/MAS NMR, GPC, WXRD, DSC and TGA analyses. When a feed molar ratio of NIPAAm to Br-PCL-Br was changed from 50 to 200, the degree of polymerization of PNIPAAm blocks attached to two ends of PPRs was in a range of 158–500. About one third of the added α-CDs were still entrapped on the central PCL chain after the ATRP process. Attaching PNIPAAm rendered the copolymers soluble in aqueous solution showing the thermo-responsibility as evidenced by turbidity measurements.     

Synthesis and properties of acrylate functionalized alkyds via a Diels–Alder reaction

The α-eleosterate pendent fatty acid of a tung oil based alkyd was functionalized via a Diels–Alder reaction with three different acrylate groups: (1) 2,2,2-trifluoroethyl methacrylate, (2) 3-methacryloxypropyl trimethoxysilane, and (3) triallyl ether acrylate. The modified alkyds were characterized by using ¹H NMR, ¹³C NMR, and gel permeation chromatography (GPC). The drying time was measured at ambient temperature. The viscoelastic properties of the alkyd-modified films were measured using dynamic mechanical thermal analysis. The viscoelastic and drying time results show that the alkyd modified with siloxane and triallyl group affords a faster drying time, higher crosslink density, and higher glass transition temperature compared to the unmodified alkyd, whereas the fluorinated alkyd possesses surface active properties, but suffers in terms of drying and crosslinking density.     

Synthesis and characterization of new poly(ether–ester–imide)s as a generation of soluble and thermally stable polymers

A new-type of dicarboxylic acid 6 was synthesized from the reaction of 1,4-bis[4-aminophenoxy]butane 4 with trimellitic anhydride 5 in a solution of glacial acetic acid/pyridine (Py) at refluxing temperature. 1,4-Bis[4-nitrophenoxy]butane 3 was prepared by reaction of 4-nitrophenol 1 with 1,4-dibromo butane 2 in N,N-dimethylformamide (DMF) solution. Then dinitro 3 was reduced to 1,4-bis[4-aminophenoxy]butane 4 by using 10% Pd–C, ethanol, and hydrazine monohydrate. So six new thermally stable and organosoluble poly(ether–ester–imide)s (PEEIs) 8a–f with good inherent viscosities were synthesized by the direct polycondensation reaction of new 1,4-bis[4-(trimellitimido)phenoxy]butane 6 with several aromatic diols 7a–f through direct polycondensation using tosyl chloride (TsCl)/pyridine (Py)/DMF system as condensing agent. The resulted polymers were fully characterized by means of FTIR and ¹H NMR spectroscopy, elemental analyses, inherent viscosity, solubility tests, differential scanning calorimeter (DSC), thermogravimetric analysis (TGA), and derivative of thermogravimetric (DTG).     

Synthesis and characterization of a novel amphiphilic poly (ethylene glycol)–poly (ε-caprolactone) graft copolymers

A series of amphiphilic graft copolymers PEO-g-PCL with different poly (ε-caprolactone) (PCL) molecular weight were successfully synthesized by a combination of anionic ring-opening polymerization (AROP) and coordination-insertion ring-opening polymerization. The linear PEO was produced by AROP of ethylene oxide (EO) and ethoxyethyl glycidyl ether initiated by 2-(2-methoxyethoxy) ethoxide potassium, and the hydroxyl groups on the backbone were deprotected after hydrolysis. The ring-opening polymerization of CL was initiated using the linear poly (ethylene oxide) (PEO) with hydroxyl group on repeated monomer as macroinitiator and Sn(Oct)₂ as catalyst, then amphiphilic graft copolymers PEO-g-PCL were obtained. By changing the ratio of monomer and macroinitiator, a series of PEO-g-PCL with well-defined structure, molecular weight control, and narrow molecular weight distribution were prepared. The expected intermediates and final products were confirmed by ¹H NMR and GPC analyzes. In addition, these amphiphilic graft copolymers could form spherical aggregates in aqueous solution by self-assemble, which were characterized by transmission electron microscopy, and the critical micelle concentration values of graft copolymers PEO-g-PCL were also examined in this article.     

Synthesis and characterization of mid-chain macrophotoinitiator of poly(ε-caprolactone) by combination of ROP and click chemistry

Well-defined mid-chain functional macrophotoinitiator of poly(ε-caprolactone) (PCL-PI-PCL) was synthesized by combination of ring-opening polymerization (ROP) and click chemistry strategy. Dibromo functional photoinitiator (Br–PI–Br) was prepared by the condensation of 2-bromopropanoyl bromide with 2-hydroxy-1-[4-(2-hydroxyethoxy)phenyl]-2-methyl propan-1-one (PI). Subsequently, terminal bromo groups in Br–PI–Br were converted to azido groups to form diazido functional photoinitiator (N₃–PI–N₃) using NaN₃. Well-defined precursor alkyne-functionalized PCL (alkyne-PCL) was prepared by ROP of ε-CL in the presence of propargyl alcohol as the initiator and stannous-2-ethylhexanoate (Sn(Oct)2) as the catalyst. Finally, the alkyne-functionalized PCL was coupled with N₃–PI–N₃ with high efficiency by click chemistry. The spectroscopic studies showed that low-polydispersity PCL with desired photoinitiator functionality in the middle of the chain was obtained.     

Modified poly(ether–imide–amide)s with pendent benzazole structures: Synthesis and characterization

Three series of novel modified poly(ether–imide–amide)s (PEIAs) having pendent benzazole units were prepared from diimide–dicarboxylic acids, including 2-[3,5-bis(4-trimellitimidophenoxy) phenyl]benzimidazole, 2-[3,5-bis(4-trimellitimidophenoxy) phenyl]benzoxazole, and 2-[3,5-bis(4-trimellitimidophenoxy) phenyl]benzothiazole, with various diamines by direct polycondensation in N-methyl-2-pyrrolidone with triphenyl phosphite and pyridine as condensing agents. These new diimide–dicarboxylic acids containing ether linkages and benzazole pendent groups were synthesized by the condensation reaction of 5-(2-benzimidazole)-1,3-bis(4-aminophenoxy)benzene, 5-(2-benzoxazole)-1,3-bis(4-aminophenoxy)benzene, or 5-(2-benzothiazole)-1,3-bis(4-aminophenoxy)benzene with trimellitic anhydride, respectively. All of the polymers were obtained in quantitative yields with inherent viscosities of 0.39–0.65 dL/g. For comparative purposes, the corresponding unsubstituted PEIAs were also prepared by the reaction of a diimide–dicarboxylic acid monomer lacking benzazole pendent groups, namely, 3,5-bis(4-trimellitimidophenoxy) phenyl, with the same diamines under similar conditions. The solubilities of the modified PEIAs in common organic solvents and their thermal stability were enhanced compared to those of the corresponding unmodified PEIAs. The glass-transition temperature, 10% weight loss temperature, and char yields at 800°C were 19–31°C, 22–57°C and 4–8% higher, respectively, than those of the unmodified polymers. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of soluble aromatic poly(ether amide amide ether ketone ketone)s by electrophilic Friedel–Crafts solution polycondensation

A new monomer, N,N′-bis(4-phenoxybenzoyl)-m-phenylenediamine (BPBMPD), was prepared by condensation of m-phenylenediamine with 4-phenoxybenzoyl chloride in N,N-dimethylacetamide (DMAc). Novel soluble aromatic poly(ether amide amide ether ketone ketone)s (PEAAEKKs) were synthesized by electrophilic Friedel–Crafts solution copolycondensation of BPBMPD with a mixture of terephthaloyl chloride (TPC) and isophthaloyl chloride (IPC) in the presence of anhydrous aluminum chloride and N-methylpyrrolidone (NMP) in 1,2-dichloroethane (DCE). The influences of reaction conditions on the preparation of polymers were examined. The polymers obtained were characterized by different physico-chemical techniques such as FT-IR, DSC, TGA, and wide-angle X-ray diffraction (WAXD). All the polymers were amorphous and the solubility of the polymers was improved by the incorporation of 1,3-dibenzoylaminobenzene moieties in the main chain. Thermal analyses showed that the polymers had high T_gs of 220–231 °C and exhibited high thermal stability. All the polymers formed transparent, strong, and flexible films, with tensile strengths of 102.9–108.5 MPa, Young’s moduli of 2.44–2.86 GPa, and elongations at break of 9.8–13.7%.     

PMMA thermoreversible networks by Diels–Alder reaction

Reversibly crosslinked polymethylmethacrylate were prepared by Diels–Alder (DA) reaction using multi-furan and multi-imide precursors. Furan functionalized PMMA were obtained by reactive extrusion (transesterification) between a commercial PMMA and furfuryl alcohol using tin(II)2-ethylhexanoate (Sn(oct)₂) or 1,5,7-Triazabicyclo[4.4.0]dec-5-ene (TBD) catalysts. Maleimide based coupling agents were prepared by amine–anhydride reaction. Thermomechanical properties of the PMMA precursors and issued networks were analyzed. Two G′ and G″ cross-over temperatures were obtained during the heating and cooling cycles. The first one at 110 °C can be assimilated to physical gel formation and the second one at 160 °C to its breaking. When the network was formed, an increasing of these temperatures is observed. Also, the G′ between these temperatures increased with the network density. The obtained network had a shape memory behavior.     

Synthesis and characterization of ferrocene end-capped poly(ε-caprolactone)s by a combination of ring-opening polymerization and “click” chemistry techniques

Ferrocene (Fc) end-capped linear and star-shaped poly(ε-caprolactone)s (PCLs) with different numbers of arms were synthesized by a combination of ring-opening polymerization (ROP) and “click” chemistry techniques in a four-step reaction procedure. In the first step, the polymer backbones were prepared via ROP of the ε-caprolactone (ε-CL) monomer in bulk by employing the compounds with different numbers of hydroxyl groups as the multisite initiators and stannous octoate (Sn(Oct)₂) as the coordination-insertion catalyst. The hydroxyl end-groups of the obtained PCLs were then converted into a bromides and azides consecutively. In the final step, the Fc moiety was attached to the termini of the PCLs using a Cu(I)-catalyzed 1,3-dipolar cycloaddition reaction between the azide end-groups of the PCLs and the acetylene group of ethynylferrocene under ambient conditions. In all cases, the FT-IR and ¹H NMR spectra indicated a successful and quantitative transformation of the desired end-functional groups. The electrochemical properties of the Fc end-capped PCLs were also investigated via cyclic voltammetry (CV).     

Synthesis of Diels–Alder bond and hydrogen bond synergistic shape memory self-healing polyurethane elastomers

Self-healing materials exhibit the ability to repair damage and restore their function. Shape memory assisted self-healing (SMASH) materials are smart materials that automatically close localized microscopic cracks and repair these cracks by bonding damaged surfaces. A novel temperature-responsive SMASH polymer composite was established by introducing Diels–Alder bonds (D–A) in polyurethane. In this article, dynamic D–A produced by the polymerization of furfurylamine and 4,4’-bismaleimidodiphenylmethane was introduced into the molecular chain to enable the polyurethane elastomers containing D–A bonds to acquire self-repairing capability. The self-healing properties of the synthesized material were examined using polarized light microscopy, which revealed excellent fracture healing. The mechanical properties before and after healing were tested, in which the initial maximum tensile strength of the material could reach 7.9 MPa, and the maximum tensile strength after self-healing was 7.3 MPa, with a repair rate of 91.8%; the maximum elongation was 585.9%, and the maximum elongation after self-healing was 469.5%, with a repair rate of 80.1%. In addition, this material has excellent repair performance for microcracks of different scales, and the micromolten part of the surface after heating can fill the micrometer cracks, play the role of antiaging, and extend the service life of the material.     

Synthesis and characterization of alternating poly(amide urethane)s from ε-caprolactone, diamines and diphenyl carbonate

The synthesis of alternating poly(amide urethane)s 5a-d was performed in three steps using ε-caprolactone, diamines, and diphenyl carbonate as starting materials. The microstructure and nature of the end groups of the poly(amide urethane)s were determined by means of ¹H NMR spectroscopy, which reveals an alternating sequence of amide and urethane linkages in a linear chain with hydroxy and phenyl urethane end groups. The molecular weight and polydispersity of the polymers obtained (, ) were determined by means of gel permeation chromatography. The thermal properties determined by means of DSC show that the poly(amide urethane)s 5a-d are semicrystalline materials having one or two endothermic transitions similar to the poly(amide urethane)s 10a-d prepared from ε-caprolactam, amino alcohols, and diphenyl carbonate. Thermogravimetric analysis of poly(amide urethane)s 5a-b shows a single step decomposition, while poly(amide urethane)s 10a-c decompose in two steps indicating that different degradation mechanisms are operating.     

Synthesis of Self-Healing Bio-Based Tannic Acid-Based Methacrylates By Thermoreversible Diels–Alder Reaction

This investigation reports the effective use of the Diels–Alder (DA) click reaction in the preparation of self-healing bio-based dendritic methacrylates having reactive furfuryl functionality. Bio-based methacrylates were synthesized by modifying tannic acid with glycidyl methacrylate and furfuryl functionality was introduced by atom transfer radical polymerization with varied amount of furfuryl methacrylate monomer. The thermoreversible network was successfully achieved by DA and retro-DA reaction between the furfuryl groups and a bifunctional maleimide crosslinker, bismaleimide. This process was studied by nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and solvent exposure tests. Differential scanning calorimetry analysis was used to determine the endothermic retro-DA reaction in the DA adduct. The self-healing property of the above crosslinked material was demonstrated by monitoring the repair of a scratch in the polymer film upon heating and cooling. This was analyzed by scanning electron microscopy. POLYM. ENG. SCI., 60:140–150, 2020. © 2019 Society of Plastics Engineers     

Novel poly(ε-caprolactone)s bearing amino groups: Synthesis,characterization and biotinylation

A novel functional ε-caprolactone monomer containing protected amino groups, γ-(carbamic acid benzyl ester)-ε-caprolactone (γCABεCL), was successfully synthesized. A series of copolymers [poly(CL-co-CABCL)] were prepared by ring-opening polymerization of ε-caprolactone (CL) and γCABεCL in bulk using tin (II)-2-ethylhexanoate [Sn(Oct)₂] as catalyst. The morphology of the copolymers changed from semi-crystalline to amorphous with increasing γCABεCL monomer content. They were further converted into deprotected copolymers [poly(CL-co-ACL)] with free amino groups by hydrogenolysis in the presence of Pd/C. After deprotection, the free amino groups on the copolymer were further modified with biotin. The monomer and the corresponding copolymers were characterized by ¹H NMR, ¹³C NMR, FT-IR, mass, GPC and DSC analysis. The obtained data have confirmed the desired monomer and copolymer structures.     

Synthesis and characterization of (poly (N-vinyl formamide)—pregelled starch—graft copolymer

Bromate / cyclohexanone redox system was investigated as a novel initiator for graft copolymerization of N-vinyl formamide onto pregelled starch. A number of variables in the grafting reaction were investigated including N-vinyl formamide, cyclohexanone, bromate ion, sulphuric acid and pregelled starch concentrations, material to liquor ratio along with polymerization time and temperature. The graft copolymers were evaluated in terms of graft yield, graft reaction efficiency and homopolymer formation (%). The optimum conditions for grafting of N-vinyl formamide onto pregelled starch are: N-vinyl formamide 50% based on weight of substrate, cyclohexanone 15 mmol / l, bromate ion, 30 mmol / l, liquor ratio 10, pH 6, time 120 min., and temperature 40°C. On the other hand, characterizations of the resultant copolymers with respect to swelling capacity, solubility %, metal ion up-take and suitability as a sizing agent for cotton textiles were investigated. The results obtained reflect that, the resultant copolymer shows better results for the aforementioned properties in comparison with that obtained from native pregelled starch as a starting substrate.     

Synthesis of core-fluorescent four-armed star and dicyclic 8-shaped poly(THF)s by electrostatic self-assembly and covalent fixation (ESA–CF) protocol

A pair of four-armed star and dicyclic 8-shaped poly(tetrahydrofuran)s, poly(THF)s, possessing a perylene diimide group at the core position (Ia and Ib, respectively) were synthesized by means of an electrostatic self-assembly and covalent fixation (ESA–CF) protocol. Mono- and bifunctional poly(THF)s having N-phenylpiperidinium salt end groups accompanying a perylene diimide tetracarboxylate as a counteranion were prepared by the ion-exchange reaction, and the subsequent covalent conversion by reflux in toluene afforded the corresponding core-fluorescent four-armed star and dicyclic 8-shaped poly(THF)s, (Ia and Ib, respectively) for the use of single-molecule fluorescence microscopy measurements.     

Synthesis and characterization of alternating poly(amide urethane)s from ε-caprolactam, amino alcohols, and diphenyl carbonate

Alternating poly(amide urethane)s from ε-caprolactam, amino alcohols H₂N-(CH₂)_x-OH (x=2-6), and diphenyl carbonate were prepared by polycondensation of α-hydroxy-ω-O-phenylurethanes 4a-e. The degree of oligomerization was adjusted by the conversion. Oligomers with two or three O-phenylurethane end groups and predetermined molecular weight were prepared by polycondensation of the α-hydroxy-ω-O-phenylurethanes 4a-e in the presence of comonomers with O-phenylurethane end groups in a given concentration. In order to prepare oligomers with hydroxyl and carboxyl groups at both chain ends suitable for coupling reactions, chain analogous reactions were performed with amino acids and amino alcohols. The microstructure of the polymers and the nature of end groups was determined by means of ¹H NMR spectroscopy and the molecular weights were determined by means of gel permeation chromatography. The poly(amide urethane)s 5a-e prepared are semicrystalline materials with melting points between 150 and 200 °C.     

Zeolite catalytic synthesis of high-performance jet-fuel-range spiro-fuel by one-pot Mannich–Diels–Alder reaction

A one-pot Mannich–Diels–Alder reaction was developed for synthesis of high-performance jet-fuel-range spirocycloalkane with an overall yield of 71.6% from biomass and petroleum derived cyclopentanone, formaldehyde, and cyclopentadiene. HZSM-5 zeolite with Si/Al molar ratio of 130 exhibits much higher catalytic activity, along with good recycling ability. Over it, a high selectivity (81.6%) and yield (80.9%) of target adduct is achieved with almost complete conversion of cyclopentanone, attributed to the synergy effect of appropriate ratio of Lewis to Brønsted acid sites and mass transfer effect of porous zeolite. More importantly, after hydrodeoxygenation, the resultant spirocycloalkane has much higher density and volumetric neat heat of combustion (0.952 g·ml⁻¹, 40.18 MJ L⁻¹) than the wildly used JP-10 fuel (0.936 g ml⁻¹, 39.41 MJ L⁻¹). This work provides a promising route to produce high-performance jet-fuel-range hydrocarbons through co-conversion of biomass and petroleum derivatives.     

Intercalative redox polymerization and characterization of poly(4-vinylpyridine)–vermiculite nanocomposite

A new nanocomposite material consisting of poly(4-vinylpyridine) (PVP) and vermiculite is synthesized by the intercalative redox polymerization of VP in the gallery of copper(II) ion-exchanged vermiculite. The formation of a single filament of the polymer in the gallery is confirmed by the increase in gallery spacing of 4.7 Å as indicated by X-ray diffraction (XRD) analysis. Electron spin resonance studies confirm the presence of Cu(II) upon ion exchange and its absence following redox polymerization. The amount of polymer present in the gallery is found to be ∼18–19 mass % by thermogravimetric analysis. Confining the polymer to the gallery spacing in vermiculite results in enhanced thermal stability that is evident from the increase in the initial decomposition temperature by ∼300°C. Differential scanning calorimetry of the nanocomposite indicates that the polymer is confined to a restricted geometry because of the absence of a glass-transition temperature, which confirms the XRD finding. The IR absorption peaks corresponding to PVP and the expected PVP UV π–π* transition at 275 nm, along with the XRD and thermal data confirms that the gallery expansion is due to the PVP filament. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 555–561, 2001     

Novel nanocomposites based on reactive organoclay of l-tyrosine and amine end-capped poly(amide–imide): Synthesis and characterization

In the present study, a series of nanocomposite materials were successfully prepared using a poly(amide–imide) (PAI) matrix and novel reactive organoclay as a reinforcing agent. The organoclay was synthesized from Cloisite Na⁺ and protonated form of l-tyrosine amino acid via ion-exchange reaction. It was confirmed by Fourier transform infrared spectroscopy, X-ray powder diffraction, field emission scanning electron microscopy, transmission electron microscopy and thermogravimetry analysis techniques. An optically active PAI was synthesized via solution polycondensation reaction of N,N′-(pyromellitoyl)-bis-phenylalanine diacid chloride and 4,4′-diaminodiphenylether. Then it was end-capped with amine end groups near the completion of the reaction to interact chemically with organoclay. Organoclay/PAI nanocomposite films containing different amounts of organoclay were prepared via solution intercalation method through blending of organoclay with the PAI solution. The nanostructures and properties of the organoclay/PAI hybrids were investigated using different techniques. Thermogravimetry analysis results indicated that the addition of organoclay into the PAI matrix increased the thermal decomposition temperatures of the resulting hybrid materials. The presence of amino acids as a biodegradable segment in both novel organoclay and optically active PAI, made the resulting nanostructure materials susceptible for biodegradation.