Effect of Anions on the Extraction of Lanthanides (III) by N,N′‐Dimethyl‐N,N′‐Diphenyl‐3‐Oxapentanediamide

Abstract

The extraction of microquantities of La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y by N,N′‐dimethyl‐N,N′‐diphenyl‐3‐oxapentanediamide (DMDPhOPDA) in 1,2‐dichloroethane from aqueous media containing ClO₄ ^?, PF₆ ^?, (CF₃SO₂)₂N^? anions or by DMDPhOPDA in 1,2‐dichloroethane in the presence of 1‐butyl‐3‐methylimidazolium bis[(trifluoremethyl)sulfonyl]imide ([C₄mim][Tf₂N]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim][PF₆]) from HNO₃ solutions has been studied. The effect of HNO₃ concentration in the aqueous phase and that of the extractant concentration in the organic phase on the extraction of metal ions is considered. The stoichiometry of the extracted complexes has been determined. The addition of HPF₆ and (CF₃SO₂)₂NH or their salts to the aqueous HNO₃ or HCl solutions leads to an enchancement of lanthanides (III) extraction by DMDPhOPDA. A considerable synergistic effect was observed in the presence of ionic liquids (IL) in the organic phase containing DMDPhOPDA. This effect is connected with the hydrophobic nature of the IL anion. The distribution of ILs between the equilibrium organic and aqueous phases can govern the extractability of lanthanides (III) in DMDPhOPDA‐IL systems.     

Comparison of Hydrometallurgical Parameters of N,N‐Dialkylamides and of Tri‐n‐Butylphosphate

Straight‐chain N,N‐dihexyloctanamide (DHOA) and branched‐chain N,N‐di(2‐ethylhexyl)isobutyramide (D2EHIBA) have been identified as promising alternatives to tri‐n‐butylphosphate (TBP) for the reprocessing of spent uranium based fuels, and selective extraction of ²³³U from irradiated thorium fuels, respectively. The present work deals with the effects of different hydrodynamic parameters such as viscosity, density, and interfacial tension (IFT) on the phase‐separation time (PST) under uranium and thorium loading conditions. The IFT values have been determined under varying experimental conditions such as the aqueous nitric acid concentration, n‐dodecane purity, ligand concentration, and thorium/uranium loading conditions. These studies have suggested that the quality of n‐dodecane affects the IFT values of different solutions. The IFT values of D2EHIBA changed marginally (23.3 ± 0.9 mNm^?1) against THOREX feed solution for the wide range of D2EHIBA concentration (0.1–1.0 M). However, IFT, viscosity, and PST values increased with uranium loading of 1.1 M DHOA. These studies suggested that a lower phase‐disengagement rate with increased uranium loading was mainly due to the increased viscosity of the loaded 1.1 M DHOA solution.     

Application of N,N′‐Dimethyl‐N,N′‐Di(4‐Chlorophenyl)Tetradecyl Malonamide for the Selective Recovery of Iron(III) from Concentrated Chloride Solutions

Abstract

The feasibility of using two new diamides namely; N,N′‐dimethyl‐N,N′‐di(4‐chlorophenyl)malonamide (DMDPhClMA) and N,N′‐dimethyl‐N,N′‐di(4‐chlorophenyl)tetradecylmalonamide (DMDPhClTDMA), as agents for the selective extraction of iron(III) from chloride solution was investigated. A systematic investigation has been carried out on the detailed extraction properties of iron(III) with these extractants from chloride media. The extraction of iron(III) from an aqueous chloride solution in the presence of metal ions, such as Zn(II), Co(II), Mn(II) Cu(II), Pb(II), Ni(II) and Ag(I) was carried out using DMDPhClMA or DMDPhClTDMA in binary and multicomponent mixtures. The quantitative extraction of iron(III) with DMDPhClMA and DMDPhClTDMA in toluene is observed at 4 and 7 M HCl, respectively. The quantitative stripping of Fe(III), from the loaded organic phase was successfully achieved by simple contact with water.     

Highly Copper(II) Ion‐Selective Transport Through Liquid Membrane Containing N,N′‐bis(salicylidene)‐1,2‐phenyldiamine

Abstract

N,N′‐bis(salicylidene)‐1,2‐phenyldiamine was synthesized for examining their ability to extract and transport Cu²⁺ through a liquid membrane. By using hydrazine sulfate and potassium thiocyanate as reducing agent and acceptor respectively in the receiving phase at the optimum pH of 1.5, the amount of copper transported across the liquid membrane after 3.5 hours was 96%. The selectivity and efficiency of copper transport from aqueous solution containing various metal ions were investigated.     

Synergistic Extraction of Lanthanides(III) by Mixtures of N‐p‐Methoxybenzoyl‐N‐phenylhydroxylamine and 1,10‐Phenanthroline

Abstract

We conducted a study on the equilibrium extraction behavior of the trivalent lanthanide ions (M³⁺), La, Pr, Eu, Ho, and Yb, from tartrate aqueous solutions into chloroform solutions containing N‐p‐methoxybenzoyl‐N‐phenylhydroxylamine (Methoxy‐BPHA, HL) and 1,10‐phenanthroline (phen). The synergistic species extracted was found to be {ML₂(phen) (HL)}⁺(1/2)Tar^2?, where Tar^2? is tartrate ion. The extraction constants were calculated. The extraction separation behavior and extractability of lanthanides are discussed in comparison with the self‐adducted chelate, ML₃(HL)₂, which was extracted in the absence of phen, and synergistic extraction by mixtures of other extractants such as 2‐thenoyltrifluoroacetone, and neutral donors.     

Synergistic Extraction of Lanthanides(III) with N‐p‐Methoxybenzoyl‐N‐Phenylhydroxylamine and Neutral Nitrogen Donors

Abstract

We investigated the extraction equilibrium behavior of a series of trivalent lanthanide ions, (M³⁺), La, Pr, Eu, Ho, and Yb, from tartrate aqueous solutions using a chloroform solution containing N‐p‐methoxybenzoyl‐N‐phenylhydroxylamine (Methoxy‐BPHA or HL) combined with an adductant, 1,10‐phenanthroline (phen) or 2,2′‐bipyridyl (bipy). The synergistic species extracted were found to be {ML₂(phen)(HL)}⁺(1/2)Tar^2? and {ML₂(bipy)(HL)₂}⁺(1/2)Tar^2?, where Tar^2? is the tartrate ion. The stoichiometry, the extraction constants, and the separation factors of these systems were determined. We discuss the extractability and the separation factors in comparison with self‐adduct chelates, ML₃(HL)_2,(o), which were formed in the absence of phen or bipy.     

C,N‐Pyridylpyrazole‐Based Ligands: Synthesis and Preliminary Use in Metal Ion Extraction

Abstract

The synthesis of new N‐donor pyridylpyrazole ligands with a functionalized arm is described. The complexation capabilities of these compounds towards bivalent metal ions (Hg²⁺, Cd²⁺, Pb²⁺, Cu²⁺, and Zn²⁺) and alkali metal ions (K⁺, Na⁺, and Li⁺) were investigated using the liquid‐liquid extraction process. The percentage limits of extraction were determined by atomic absorption measurements.     

15N solid state NMR study of the reactions of propane or propene, 15NO and oxygen on Na‐, H‐, and CuZSM‐5

Ni- and Co-based catalysts derived from NiAl- and CoAl-layered double hydroxides were tested in four kinds of reactions of methanol, namely decomposition of methanol (DCM), partial oxidation of methanol (POM), steam reforming of methanol (SRM), and oxidative steam reforming of methanol (OSRM), for the purpose of H₂ production for fuel cells. H₂, CO and/or CO₂ were the predominant products with minor amounts of dimethyl ether (DME) and CH₄ depending on the reaction temperature. Among the four kinds of reactions tested, the OSRM reaction was found to be more effective in terms of MeOH conversion and H₂ selectivity over these catalysts. Higher selectivity of H₂ and CO₂ with only traces of CO could be obtained at about 100% methanol conversion around 300 °C in the OSRM reaction over the catalyst derived from CoAl-LDH. Substitution of a part of Al by Sn in the NiAl- and CoAl-LDH systems was found to be inhibiting the methanol conversion. On the other hand, the selectivities to DME and CH₄ were declined with a consequent increase in the selectivity to H₂. In addition, considerable amount of formaldehyde was also noticed, especially over the catalyst derived from CoAlSn-LDH at lower reaction temperatures. The observed difference in the catalytic performance upon Sn incorporation was attributed to an improved redox capability of the Ni- and Co-based oxide catalysts, as determined by temperature-programmed reduction (TPR) experiments. This revised version was published online in July 2006 with corrections to the Cover Date.     

Hydrothermal deactivation of Ce‐ZSM‐5, Ce‐beta, Ce‐mordenite and Ce‐Y zeolite deNOx catalysts

The hydrothermal stability of Ce³⁺ zeolite catalysts used for selective catalytic reduction of NO _x was investigated. Aging of Ce‐ZSM‐5, Ce‐beta, Ce‐mordenite and Ce‐Y catalysts consisted of steaming in 10 or 12 vol% water at 600°C for 3–99 h. Ce‐ZSM‐5 (Si/Al ratios: Si/Al = 17.1, 22.6 and 146.6) and Ce‐mordenite (Si/Al = 6.4, IE = 77.2%) showed fast deactivation. Ce‐beta (Si/Al = 12, IE = 68.4%) and Ce‐Y (Si/Al = 2.8, IE = 122%) are significantly more stable zeolite catalysts, Ce‐beta being the most active of these two. Ce‐beta and Ce‐ZSM‐5 catalysts – both having high initial activities – were characterized with ²⁹Si‐NMR and ²⁷Al‐NMR. Especially Ce‐ZSM‐5 showed an increase of non‐framework Al, meaning that the zeolite suffered from dealumination. This revised version was published online in July 2006 with corrections to the Cover Date.     

Characterization of Extraction of Chromatographic Materials Containing Bis(2‐ethyl‐1‐hexyl)Phosphoric Acid, 2‐Ethyl‐1‐Hexyl (2‐Ethyl‐1‐Hexyl) Phosphonic Acid,and Bis(2,4,4‐Trimethyl‐1‐Pentyl)Phosphinic Acid

Abstract

This work describes the uptake of a wide range of metal ions, including alkaline earths, transition metals, post‐transition metals, lanthanides and actinides, from acidic nitrate and chloride media on extraction chromatographic resins prepared from three different acidic organophosphorus compounds: bis(2‐ethyl‐1‐hexyl) phosphoric acid (HDEHP), 2‐ethyl‐1‐hexyl(2‐ethyl‐1‐hexyl)phosphonic acid, (HEH[EHP]) and bis(2,4,4‐trimethyl‐1‐pentyl)phosphinic acid (H[DTMPP]). The data is plotted in a format allowing for the easy comparison of the uptake of all metal ions under a given condition. Additionally, examples of several novel separations using the three extraction chromatographic materials are discussed.     

N,N,N′,N′-四苯基联苯胺的合成新方法

以联苯胺和二苯胺为原料，经两步反应合成了N，N，N′，N′－四苯基联苯胺（TPB)。与已报道的方法相比较，该方法具有产率高、操作简单、原料价格低廉等优点。     

Phthalimide‐N‐oxyl (PINO) Radical,a Powerful Catalytic Agent: Its Generation and Versatility Towards Various Organic Substrates

The last two decades represents a “start line” for the worldwide chemists, to develop new oxidizing methods, to replace the “old‐fashioned” ones, which are expensive, pollute the environment, and proceed in harsh conditions. One of the best candidates to satisfy the present global needs is N‐hydroxyphthalimide (NHPI), which can be used as a catalytic reagent successfully in a wide range of organic transformations. In this article, a review of the most frequently used methods to transform the NHPI into its nitroxyl radical correspondent, and the use of this powerful catalytic agent into various organic transformations, are presented.     

Non-Dispersive Solvent Extraction of Neodymium using N,N,N’,N’-Tetraoctyl Diglycolamide (TODGA)

Hollow fiber contactor was used to study non-dispersive extraction (NDSX) of Nd³⁺ ions from aqueous solutions. N,N,N′,N′-tetraoctyl diglycolamide (TODGA) diluted with n-dodecane was used as the organic phase with di-n-hexyl octanamide (DHOA) as the phase modifier. The role of cations (H⁺/Na⁺) on the transport of Nd³⁺ ions has been investigated for this system. It was observed that H⁺ ion has a significant role to play in the Nd³⁺/TODGA complexation reaction. A mathematical model has also been developed to simulate the NDSX process in a hollow fiber contactor. A comparison has also been made between extraction profiles from the NDSX process and the hollow fiber supported liquid membrane (HFSLM) process. It was observed that NDSX gave comparatively faster rates of extraction in the presence of H⁺ ions but slower in the absence of H⁺ ions.     

N,N二甲基环已胺通过鉴定

N,N二甲基环已胺系冰箱、冰库等绝热用硬聚氨酯泡沫塑料发泡用的优良催化剂。同时也可以作为防锈剂,汽油抗氧化剂使用。当其为聚氨酯发泡用催化剂时,催化剂用量为配方量的3.4％,国内长期依赖进口,随着冰箱、包装等工贸行业的发展,需求量不断增加,我国目前年需要量约为4吨左右。根据国家科委对助剂立     

Acid‐Base and Organic‐Water Distribution Equilibria for Symmetrically‐Substituted P,P′‐Dialkyl Alkylenebisphosphonic Acids

Abstract

P,P′‐dialkyl alkylenebisphosphonic acids are powerful metal extraction reagents. The acid dissociation constants for a homologous series of aqueous‐insoluble P,P′‐di‐3‐(trimethylsilyl)‐propyl and aqueous‐soluble P,P′‐diethyl methylene‐, ethylene‐ and propylene‐ bisphosphonic acids were determined in a 70∶30 w/w methanol‐water solvent by potentiometric titration and ³¹P NMR spectrometry. The values obtained for the diethyl‐substituted acids were compared with those determined in water and used to assess the effect of the medium on the aqueous acid dissociation constants of the lipophilic series of P,P′‐di‐3‐(trimethylsilyl)propyl alkylenebisphosphonic acids. The dependence of the organic/aqueous distribution equilibrium on the aqueous acid concentration was also investigated using electrospray ionization mass spectrometry. The acid dissociation and organic/aqueous distribution properties of the substituted alkylenebisphosphonic acids are discussed in terms of their influence on metal ion extraction.     

Mutual Separation of (W,As, Mo,V, Ge,B) Oxoanions from Bi‐metallic Solution by Resin having Methyl‐Amino‐Glucitol Moiety

Abstract

The mutual separation of (W, As, Mo, V, Ge, B)‐oxoanions using resin having methyl‐amino‐glucitol polymeric moiety from bimetallic solution was investigated by means of dynamic column experiments. The effect of solution pH on the separation efficiency and on the co‐removal level of metallic impurities was followed in this study. The conditions for efficient desorption of metals were determined in order to get the highly concentrated, impurities free solution suitable for recovery and reuse of separated metal. Effective separation of molybdenum and vanadium from boron or germanium and tungsten from arsenic was achieved.