共查询到20条相似文献,搜索用时 250 毫秒
1.
设计一套超高压的氮气和氩气供气系统。其目的是提供超过lOOMpa超高压的氮气和氩气气源,并满足常规的高压气源需求,同时提供了功能先进的气体纯度在线检测,超高压力的在线检测和计算机控制功能,并有单独的模块单元,可以对氮气和氩气进行适合比例的混合。 相似文献
2.
膜法/深冷法联合空分的理论研究 总被引:2,自引:0,他引:2
利用硅橡胶膜分离器将空气的氧气,氩气,氪气和氙气等浓度提高,使氮气,氦气和氖气的浓度降低,再借助于深冷法提高空分过程中的氧气,氩气,氪气和氙气等的产量和浓度。此外,还获得了不抽氩馏份工作的空分设备上的塔塔板上的蒸汽和液体的计算浓度及温度分布等,并和法斯托夫斯基的数据进行了对比。 相似文献
3.
在样品气体进色谱系统前加装脱氧管,去除氧对氩的影响,保证了仪器系统部分对氢气中氩气、氮气、一氧化碳进行常量测定。测定结果准确、可靠,改进后的测定系统能满足用户的需求。 相似文献
4.
<正>南非氩气公司将于1984年在西班牙Madria建造一台价值2000万美元的工业气体设备。该设备能生产200公吨/天的氧气、氮气和氩气。 相似文献
5.
介绍日本空分设备、PSA装置、膜分离装置、臭氧发生装置、无缝钢瓶、低温容器、无缝铝钢瓶、氧气、氮气、氩气、氦气、氖氪氙等的生产与用途、销量的情况。表1。 相似文献
6.
7.
<正>温室气体是具有温室效应的微量气体,其总和不到整个大气的1%(99%以上是氮气(N2)、氧气(O2)、氩气(Ar)和水汽(H2O))。但是,具有辐射活性和化学活性的微量气体在控 相似文献
8.
我厂空分装置及氧气充装站于1976年建成投产.现有三套150m3/h空分设备和一套年产氩气2.5万m3的制氩装置,担负着总厂氮气、氧气、氩气的供应,氧气作为副产品也对外销售. 相似文献
9.
10.
11.
南钢制氧厂30000 m3/h空分设备的1000 m3低温液氩贮槽配备了氩气回收系统,但启用后造成了1000 m3低温液氩贮槽被污染和精氩塔氮含量偏高的事故,检修并改造管路系统后氩气回收系统运行正常。介绍氩气回收系统的流程和管路检修、改造方案。 相似文献
12.
13.
This paper focused on the determining of gas types in counter flow type vortex tubes. In the present study, four different gas types including air, oxygen, nitrogen, and argon in the vortex tube with different inlet pressures and nozzle numbers have been used. The main aims of this paper are to investigate the correlations between gas types and input parameters comprising nozzle numbers, inlet pressures, inlet mass flow rate, temperature of cold outlet, temperature of hot outlet, and cold mass fraction and to select the most important attributes using correlation based attribute reduction and pairwise fisher score attribute reduction (PFSAR). After attribute reduction methods applied to dataset, k-nearest neighbor and C4.5 decision tree classifiers have been used to determine the gas type in the RHVT. The results have demonstrated that the PFSAR is a robust and efficient method in the reduction of attributes belonging to vortex tube. 相似文献
14.
KDON-15000/15000型空分设备粗氩液化器液氮调节阀阀后管道大量漏液,为了不影响空分设备正常供应氧、氮、氩产品,改变精氩系统的工艺流程后,保持空分设备继续运行。简介制氩系统的工艺流程和运行状况,分析应急处理措施的可行性和实施效果。 相似文献
15.
炼油化工厂的检修中,都要进行管线的切割和容器、储罐的焊接作业,这些作业中要求容器中的瓦斯含量要非常小(一般要小于0.1%),而且检修要求分析一定要快速、准确。本文很好地解决了这两个问题。 相似文献
16.
17.
18.
K. Matsumoto H. Maeda K. Postava K. Takahashi M. Aoyama T. Yamaguchi J. Pistora 《Fullerenes, Nanotubes and Carbon Nanostructures》2003,11(1):15-23
Single crystal and polycrystal of fullerene C60 have been grown by sublimation in a fused silica ampoule. Spectro-ellipsometric data from the polished surface of the polycrystal are different from the ones of the single crystal. This difference can be attributed to the existence of grain boundaries and voids associated with polycrystals, and has been explained using the Bruggeman Effective-Medium-Approximation (EMA). In helium, argon, hydrogen, or nitrogen atmosphere, the polycrystal has shown reversible change in spectra with pressures. This change has been able to be interpreted by a physisorption model in which gas molecules enter the voids and are occluded as a quasi-liquid. For oxygen atmosphere, the spectrum has shown complicated and irreversible change, implying that some part of oxygen atoms remains in the voids due to possible chemisorption. 相似文献
19.
用扫描电镜观察与能谱分析方法研究了X70管线钢板超声波探伤不合格的原因。试验分析表明:超声波探伤缺陷是由数量较多、尺寸为100μm以上的气孔与缩松经轧制变形压合而形成的;气孔是由原X70管线钢坯连铸时下水口保护浇铸的氩气所引起,缩松是由连铸拉速过大所致。关闭下水口保护浇铸的氩气,并降低拉速可使X70管线钢板超声波探伤合格率达到100%。 相似文献