提升管内颗粒浓度梯度力的特性

由于Kutta-Joukowski横向力与浓度梯度力的共同作用,提升管内颗粒沿径向在边壁大量聚集并形成稳定的环?核结构。根据实验数据,分析了颗粒浓度梯度的径向分布特征,考察了不同操作条件下浓度梯度力系数K的分布特性。由Kutta-Joukowski横向力与浓度梯度的关系,提出了浓度梯度力的表达式Fρ=K(dρ/dr)A及浓度梯度力系数K的表达式K=[?ρg(νg?νp)(?v/?r)r]/?dρ/dr+(d2ρ/dr2)r?。提升管内颗粒群受到的浓度梯度力与浓度梯度力系数K有关。浓度梯度力系数K在提升管中心处为0,沿提升管径向呈“N”型分布,随表观气速增加而增加;提升管内充分发展段K的数值明显大于提升管加速区和出口约束区,总结了浓度梯度力系数K的经验关联式。     

耦合流化床提升管内固含率径向分布及沿轴向的发展

针对催化汽油辅助反应器改质降烯烃工艺,结合提升管与流化床的特点,建立了一套提升管与流化床耦合反应器大型冷态实验装置. 在不同操作条件下,采用PV-4A型光纤密度仪测定了提升管内固含率沿径向的分布规律. 结果表明,固含率径向分布整体上呈现中心小、边壁大的环-核结构分布特征;沿轴向向上,各径向位置上的固含率在颗粒加速区逐渐降低,在充分发展区趋于稳定,在颗粒约束返混区又有所升高;各径向位置上的固含率随表观气速增大或颗粒循环强度减小而减小,且均匀性变好;提升管上部流化床内颗粒静床高度只对颗粒约束返混区内固含率径向分布有影响,而对颗粒加速区和充分发展区的固含率径向分布影响较小;当表观气速较低或颗粒循环强度较大时,颗粒约束返混区上部局部固含率最大值出现在无因次半径f=r/R=0.7附近,此时局部无因次固含率es*=es/ 沿轴向在H>5.33 m时不再具有相似性;通过比较径向不均匀指数,得到轴向各区固含率径向分布趋于均匀的程度依次为：充分发展区>颗粒约束返混区>颗粒加速区. 利用实验数据回归出了局部固含率径向分布关联式,其平均相对误差在6%以内.     

流化床-提升管耦合反应器内沥青颗粒的流动特性

针对重油残渣(沥青颗粒)气化制氢工艺,在流化床-提升管耦合反应器大型冷模实验装置上,考察了不同操作条件下沥青颗粒体系在耦合反应器内截面平均密度的轴向分布. 结果表明,对单组分沥青颗粒体系,耦合反应器适宜的操作条件为：提升管表观气速ug,r=0.70~1.76 m/s;与A类颗粒相比,沥青颗粒在耦合反应器内的流动特性呈现不同的特点,整个反应器沿轴向可分为底部流化床密相区、提升管底部低密度区、提升管颗粒密度重整区、提升管加速区、充分发展区和出口约束区6个区域;反应器内截面平均密度随颗粒质量流率增大而增大,随表观气速增大而减小;确定了耦合反应器内提升管区域截面平均固含率的影响参数为ep', Fr及H/Dr,并利用实验数据回归了平均固含率的轴向分布经验模型,其计算值与实验值吻合较好.     

气液固三相提升管中液相扩散特性

对气液固三相提升管内液相扩散行为进行了实验研究,考察了气速、液速以及颗粒循环量等操作因素对液相扩散系数的影响规律.实验研究结果表明,轴向、径向扩散系数随气速的增大均增大;轴向扩散系数随液速的变化基本保持不变,径向扩散系数随液速的增大而减小;轴向、径向扩散系数随颗粒循环量的增大均增大.与传统的气液固三相流化床相比,气液固三相提升管反应器更接近理想的平推流反应器.     

多段分级转化流化床提升管速度场的研究

针对流化床煤气化过程中需要长气固接触时间和高固体浓度,开发了耦合灰熔聚流化床和提升管的多段分级转化流化床。为了研究多段分级转化流化床提升管中局部颗粒速度的径向、轴向分布,在不同的操作条件下,采用PV-6型颗粒速度测量仪在冷态实验装置中系统测定提升管内局部颗粒速度。实验结果表明:提升管中任何径向、轴向位置的颗粒速度随着操作气速的增大而增大,随循环量的增加而减小。操作条件对中心区颗粒速度变化的影响明显高于边壁区。颗粒的加速首先发生在提升管中心区域,然后向边壁区域扩展。颗粒速度径向分布的不均匀性沿轴向逐渐增大,并且受操作气速影响比较大。     

气固逆流下行流化床中颗粒速度的径向与轴向分布

在内径90 mm、高7 m的逆流下行床冷态实验装置中,研究了气固逆流下行床中循环锅炉灰(dp=300 mm)颗粒速度的径向分布及其沿轴向发展. 结果表明,局部颗粒速度沿径向分布是不均匀的,在完全发展区,颗粒速度中心和边壁低、在r/R=0.85附近颗粒速度最大. 由大量实验数据回归出预测充分发展段局部颗粒速度的关联式,该公式计算值与实验值的平均相对偏差小于±11%. 不同径向位置的局部颗粒速度沿轴向的变化趋势不同,边壁区域(r/R>0.622)颗粒速度沿轴向单调递增,而中心区域(0相似文献   

下行床内Kutta-Joukowski横向力与颗粒浓度径向分布

将空气动力学的理论和场论用于分析、量化气固下行床内颗粒浓度不均匀分布。通过理论分析,结合文献中所给出实验数据,获得了下行床内Kutta-Joukowski横向力的表达式F_(K-J)=-ρ_g(ν_p-ν_g)(?p/?r)r,并给出了Kutta-Joukowski横向力在下行床内的分布;分析了操作条件对Kutta-Joukowski横向力分布特性的影响。结果表明,局部Kutta-Joukowski横向力是下行床内颗粒浓度沿径向分布不均匀的主要原因,其作用方向由低密度区指向高密度区。根据分析结果,给出了下行床内F_(K-J)的经验关联式。     

多段分级转化流化床提升管中颗粒聚团特性的研究

采用PC6D型颗粒浓度测量仪,在多段分级转化流化床冷态实验装置上,测量了提升管中局部固体浓度,对颗粒聚团特性进行了实验研究。结果表明:径向上絮状物的时间分率Fc和絮状物内的颗粒浓度εsc在床层中心区(r/R0.6)较低,而在边壁区(r/R0.8)相对较高。提升管所有截面上各径向位置的Fc和εsc均随表观气速urg的减小和/或固体循环量Gs的增加而增加,轴向上操作条件对底部加速段Fc、εsc的影响明显高于对上部充分发展段Fc、εsc的影响;径向上操作条件对中心区Fc、εsc的影响显著高于对边壁区Fc、εsc的影响。在絮状物颗粒浓度0到εsmf范围内,得出絮状物内的颗粒浓度εsc与该处相应的局部颗粒浓度εs的变化关系式为εsc=3.33εs0.8。     

流化床-提升管耦合反应器内固含率的轴向分布及流动发展

在耦合流化床反应器大型冷模实验装置上,考察了不同表观气速下FCC颗粒在耦合流化床内截面平均密度的轴向分布. 结果表明,反应器轴向固含率可分为底部流化床区域和上部提升管区域. 前者的密相区平均固含率随表观气速增大而减小;后者的平均固含率随表观气速Ug增大而增大,Ug<0.58 m/s时固含率分布均匀,Ug=0.70~1.04 m/s时提升管出口出现约束返混区(>8.62 m),Ug>1.16 m/s时提升管底部出现密度重整区(3.82~4.57 m)、加速平稳区(4.57~8.62 m)和出口返混区(>8.62 m). 确定了耦合反应器内提升管区域截面平均固含率的影响参数,并利用实验数据回归了平均固含率的轴向分布经验模型,计算值与实验值吻合较好.     

组合约束型提升管出口气固分布器的压降

在一套组合约束型提升管冷态实验装置上,通过实验研究了不同操作条件下提升管出口气固分布器的压降,并与常规气体分布器压降进行了对比。实验结果表明,在零床层及有床层的操作模式下,气固分布器压降均随提升管内表观气速和颗粒循环强度的增加而增大,在颗粒循环强度较低时,气固分布器压降曲线变化的斜率随着表观气速的增加而增大,在颗粒循环强度较高时,气固分布器压降曲线变化的斜率随着表观气速的增加而减小;随着开孔率及上部流化床层压降增加,气固分布器压降呈降低趋势,当流化床层压降达到一定程度后,分布器各孔方可实现有效布气,此后气固分布器压降趋于近似不变;在相同表观气速及开孔率下,气固分布器压降大于常规气体分布器压降。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。