Biogas generation from bagasse-based paper mills by anaerobic digestion

Bagasse-based paper mills in developing countries do not have sophisticated waste water treatment technology to combat water pollution released by these mills. This paper presents an overview of bagasse handling and sources of waste generation, the seriousness of pollution discharge, and treatment options available to tackle the waste water derived from bagasse-based paper mills. Extensive laboratory treatability studies indicate that anaerobic digestion for biogas generation is a viable method for handling bagasse-based paper mill wastes. The waste water was treated at an organic loading of 0.8 kg BOD m^?3 day^?1 and 1.6 kg COD m^?3 day^?1 and a detention time of 10 days, achieving 90% reduction in BOD and COD without supplementation of any nutrients. With a yield coefficient of 0.5, the average quantity of cells produced per day was calculated to be 1.683 kg day^?1 or 0.25 kg cells produced kg^?1 BOD removed. Intermittent checking on excess alkalinity in the anerobic system is necessary for achieving maximum treatment efficiency.     

Performance evaluation of the anaerobic fluidised bed system: I. Substrate utilisation and gas production

COD removal efficiencies in the range 75 to 98% were achieved in an anaerobic fluidised bed system designed for the recovery of methane from liquid wastes, when evaluated at COD loadings of between 5.8 to 108 kg m^?3 day^?1, hydraulic retention times of between 4.45 to 8 h, and feed COD concentrations of beween 480 to 9 000 mg dm^?3. More than 90% of feed COD could be removed up to COD loadings of about 40 kg m^?3 day^?1. Up to around 300 dm² of methane were produced per kg COD removed and this methane production rate was independent of the COD loadings applied in this investigation. Volatile acid concentration in the reactor increased sharply at a COD loading of about 40 kg m^?3 day^?1 and therefore, sufficient alkalinity should be provided to prevent pH from dropping to the undesirable level. The anaerobic fluidised bed system can be operated at a significantly higher liquid throughputs while maintaining its excellent efficiency.     

Two‐phase anaerobic treatment system for fat‐containing wastewater

This study was conducted to investigate the feasibility of a two‐phase anaerobic treatment system for fat‐containing wastewater. The two‐phase system was composed of a continuously stirred tank reactor for acidogenesis and an upflow anaerobic sludge blanket (UASB) reactor for methanogenesis. Its performance was compared with a conventional single‐phase system of a UASB reactor treating synthetic wastewater containing major long‐chain fatty acids (LCFAs). LCFAs did not cause any significant problem up to the LCFA mixture loading rate of 1.21 kg LCFA‐COD m^?3 day^?1 (3500 mg LCFA‐COD dm^?3) in both systems. However, the efficiency of the single‐phase system deteriorated at loading rates above 1.38 kg LCFA‐COD m^?3 day^?1 (4000 mg LCFA‐COD dm^?3), while that of the two‐phase system was still satisfactory. More than 19.2% of LCFAs were degraded and 11.5% of unsaturated LCFAs were saturated in the acidogenesis of the two‐phase system, which led to the enhanced specific methane production rate and the reduced scum layer of the subsequent UASB reactor. Copyright © 2003 Society of Chemical Industry     

Start‐up and recovery of a biogas‐reactor using a hierarchical neural network‐based control tool

Due to its intricate internal biological structure the process of anaerobic digestion is difficult to control. The aim of any applied process control is to maximize methane production and minimize the chemical oxygen demand of the effluent and surplus sludge production. Of special interest is the start‐up and adaptation phase of the bioreactor and the recovery of the biocoenose after a toxic event. It is shown that the anaerobic digestion of surplus sludge can be effectively modeled by means of a hierarchical system of neural networks and a prediction of biogas production and composition can be made several time‐steps in advance. Thus it was possible to optimally control the loading rate during the start‐up of a non‐adapted system and to recover an anaerobic reactor after a period of heavy organic overload. During the controlled period an optimal feeding profile that allowed a minimum loading rate of 6 kg COD m^?3 d^?1 to be maintained was found. Maximum loading rates higher than 12 kg COD m^?3 d^?1 were often reached without destabilizing the system. The control strategy resulted simultaneously in a high level of gas production of about 3 m³_biogas m^?3_reactor and a methane content in the biogas of about 70%. To visualize the effects of the control strategy on the reactor's operational space the data were processed using a data‐mining program based on Kohonen Self‐Organizing Maps. Copyright © 2003 Society of Chemical Industry     

Treatment of high‐fat‐containing dairy wastewater in a sequential UASBR system: influence of recycle

BACKGROUND: Raw cheese whey originating from white cheese production results in a strong and complex wastewater excessively rich in organic matter (chemical oxygen demand, COD = 28–65 g L^?1), fatty matter (14–24.5 g L^?1) and acidity (3.9–6.1 g L^?1). It was treated in a three‐stage configuration consisting of a pre‐acidification (PA) tank and sequential upflow anaerobic sludge bed reactors (UASBRs) at 2.8–7 g COD L^?1 day^?1 organic loading rates, during which the effects of effluent recycling at low rates and promoted SRB activity were investigated. Acidification, volatile fatty acids (VFA), COD and fatty matter removal and volatile solids were monitored throughout the system during the study. RESULTS: Recycling of the effluent promoted VFA and COD removal as well as pH stability in both stages of the UASBRs and the effluent where high alkalinity levels were recovered reducing alkali requirement to 0.05 g OH g^?1 COD_applied. Higher removal rates of 71–100 and 50–92% for VFA and COD were obtained by use of recycling. Fatty matter was removed at 63–89% throughout the study. Volatile solids build‐up was significant in the inlet zones of the UASBRs. CONCLUSIONS: The system produced efficient acidification in the PA tank, balanced pH levels and an effluent high in alkalinity and BOD/COD ratio. Efficient VFA removal and solids immobilization was obtained in both stages up to the highest loading rate. Recycling improved the system performance under high fatty matter loading conditions. A major advantage of the sequential system was that the second stage UASBR compensated for reduced performance in the first stage. Copyright © 2010 Society of Chemical Industry     

Anaerobic digestion of olive mill wastewater in a periodic anaerobic baffled reactor (PABR) followed by further effluent purification via membrane separation technologies

BACKGROUND: The combined treatment of olive mill wastewater (OMWW) by applying the anaerobic digestion process and further treatment in a system consisting of filters and membranes is presented. The anaerobic digestion of the OMWW took place in a high rate system, the periodic anaerobic baffled reactor (PABR). Application of the membrane system aimed at purifying the anaerobic effluent. RESULTS: An increase in the organic loading rate was achieved by increasing the influent chemical oxygen demand (COD) and alternatively by decreasing the hydraulic retention time (HRT). The first option caused process failure, since the volatile fatty acids accumulation resulted in negligible biogas production. In contrast, the second change (decrease in HRT) led to stable operation that permitted the reduction of the HRT to 3.75 d and increase of the organic loading rate to 8.9 g tCOD L^?1 d^?1 with satisfactory total COD removal (72%). Higher total COD removal (up to 80%) was observed at lower organic loading rates (<3.5 g tCOD L^?1 d^?1). Further purification in the membrane units resulted in a final permeate of less than 0.1 g tCOD L^?1. The membrane systems proved to be more efficient on the anaerobic effluent than on the raw OMWW (the final permeate in that case contained 1g tCOD L^?1). CONCLUSIONS: The anaerobic digestion of OMWW in a PABR was stable even at high organic loading rates. Filtering and membrane fractionation of the PABR effluent resulted in a final permeate stream of high quality, suitable for irrigation and/or reuse in the proposed operating scheme for diluting the OMWW prior to anaerobic digestion. Copyright © 2009 Society of Chemical Industry     

Continuous methanogenesis of black liquor of pulp and paper mills in an anaerobic baffled reactor using an immobilized cell system

An anaerobic baffled reactor together with an immobilized cell system has been proposed for methanogenesis of the black liquor from pulp and paper mills in a continuous system. A maximum chemical oxygen demand reduction of 50%, and biogas generation of 10 L d^?1, having methane content of 66% (v/v) at an organic loading rate (OLR) of 7 kg m^?3 d^?1 with hydraulic retention time of 2 days, were recorded. OLR values higher than 7 kg m^?3 d^?1 were toxic to methanogenesis and destabilized the reactor system. Copyright © 2006 Society of Chemical Industry     

Determination of potential methane production capacity of a granular sludge from a pilot‐scale upflow anaerobic sludge blanket reactor using a specific methanogenic activity test

A 450 dm³ pilot‐scale upflow anaerobic sludge blanket (UASB) reactor was used for the treatment of a fermentation‐based pharmaceutical wastewater. The UASB reactor performed well up to an organic loading rate (OLR) of 10.7 kg COD m^?3 d^?1 at which point 94% COD removal efficiency was achieved. This high treatment efficiency did not continue, however and the UASB reactor was then operated at lower OLRs for the remainder of the study. Specific methanogenic activity (SMA) tests were, therefore, carried out to determine the potential loading capacity of the UASB reactor. For this purpose, the SMA tests were carried out at four different initial acetate concentrations, namely 500 mg dm^?3, 1000 mg dm^?3, 1500 mg dm^?3 and 2000 mg dm^?3 so that substrate limitation could not occur. The results showed that the sludge sample taken from the UASB reactor (OLR of 6.1 kg COD m^?3 d^?1) had a potential acetoclastic methane production (PMP) rate of 72 cm³ CH₄ g^?1 VSS d^?1. When the PMP rate was compared with the actual methane production rate (AMP) of 67 cm³ CH₄ g^?1 VSS d^?1 obtained from the UASB reactor, the AMP/PMP ratio was found to be 0.94 which ensured that the UASB reactor was operated using its maximum potential acetoclastic methanogenic capacity. In order to achieve higher OLRs with desired COD removal efficiencies it was recommended that the UASB reactor should be loaded with suitable OLRs pre‐determined by SMA tests. © 2001 Society of Chemical Industry     

Batch treatment of saline wastewater by Halanaerobium lacusrosei in an anaerobic packed bed reactor

BACKGROUND: This study considers batch treatment of saline wastewater in an upflow anaerobic packed bed reactor by salt tolerant anaerobic organisms Halanaerobium lacusrosei . RESULTS: The effects of initial chemical oxygen demand (COD) concentration (COD₀ = 1880–9570 mg L^?1), salt concentration ([NaCl] = 30–100 g L^?1) and liquid upflow velocity (V_up = 1.0–8.5 m h^?1) on COD removal from salt (NaCl)‐containing synthetic wastewater were investigated. The results indicated that initial COD concentration significantly affects the effluent COD concentration and removal efficiency. COD removal was around 87% at about COD₀ = 1880 mg L^?1, and efficiency decreased to 43% on increasing COD₀ to 9570 mg L^?1 at 20 g L^?1 salt concentration. COD removal was in the range 50–60% for [NaCl] = 30–60 g L^?1 at COD₀ = 5200 ± .100 mg L^?1. However, removal efficiency dropped to 10% when salt concentration was increased to 100 g L^?1. Increasing liquid upflow velocity from V_up = 1.0 m h^?1 to 8.5 m h^?1 provided a substantial improvement in COD removal. COD concentration decreased from 4343 mg L^?1 to 321 mg L^?1 at V_up = 8.5 m h^?1, resulting in over 92% COD removal at 30 g L^?1 salt‐containing synthetic wastewater. CONCLUSION: The experimental results showed that anaerobic treatment of saline wastewater is possible and could result in efficient COD removal by the utilization of halophilic anaerobic bacteria. Copyright © 2008 Society of Chemical Industry     

The influence of influent distribution and blood content of slaughterhouse wastewater on the performance of an anaerobic fixed‐film reactor

This paper evaluates the performance of a laboratory‐scale anaerobic fixed‐film reactor (AFFR) with arranged media treating slaughterhouse wastewater. The reactor was operated at 20 °C, its organic loading rate was increased from 1.8 to 9.2 kg COD m^?3 d^?1, and it had a short hydraulic residence time (5–9 h). The influence of wastewater concentrations on its performance was studied by artificially increasing the blood content of the wastewater. The efficiency of the removal of organic matter decreased from 70% to 54% as the superficial velocity increased from 0.12 to 0.97 m h^?1, due mainly to distribution defects, as had been confirmed experimentally by tracer tests. The kinetics of the anaerobic processes was limited by substrate availability, even at high COD concentrations (between 700 and 1100 mg dm^?3) due to a high content of slowly biodegradable and inert compounds present in the wastewater from the slaughterhouse. It was observed that a large amount of the organic matter had accumulated inside the reactor instead of being removed by methanogenic digestion. Furthermore, the fraction of organic matter held inside the reactor varied significantly in relation to the blood content of the wastewater. Copyright © 2005 Society of Chemical Industry     

Anaerobic digestion of alkaline black liquor using an up-flow anaerobic sludge blanket reactor

The anaerobic digestion of alkaline black liquor from a cereal straw pulping mill was studied in batch (serum bottles) and continuous systems (up-flow anaerobic sludge blanket reactor—UASB). The batch digestion studies confirmed that lignin and related compounds (LRC) in the alkaline black liquor were the main inhibitory substances and could not be decomposed by anaerobic bacteria. At organic loading rates of 5–10 kg COD m^?3 day^?1, the UASB reactor achieved 50–60% COD removal efficiencies. Gas production was 2–3 dm³ per dm³ of alkaline black liquor. Two different sludge types were examined in the reactor: granular and cluster-like sludges. Sludge in a cluster, which involved many small granules and flocs, tended to form larger aggregates and possessed good settling ability.     

Anaerobic biodegradability and toxicity of eucalyptus fiber board manufacturing wastewater

Wastewater from eucalyptus fiber board manufacturing (EFBM) was characterized and studied for its treatability by anaerobic digestion. The characteristics of the wastewater (in mg dm^?3), are as follows: COD (42 000), SS (550), SO (1200), PO.P (50), NH.N (15), VFA (710), phenol (20), p-cresol (125), tannin COD (1460) and pH 2.8. Approximately 60% of the COD is composed of carbohydrates. The continuous treatment of EFBM wastewater resulted in 93% COD removal and 78% COD methanogenized, with influent COD values of 20 g dm^?3 and OLR of 17 kg COD m^?3 d^?1. The biodegradation reached 94% of influent COD and 74% of influent ultraviolet absorbance (215 nm). EFBM wastewater supplied at 20 g COD dm^?3 (1:1 tap water diluted) caused 50% methanogenic toxicity, which did not disappear when tannins were removed by adsorption on PVP (polyvinylpyrrolidone). The toxicity decreased to 25% once the wastewater was autoxidized with air at high pH values. However, the effluent of the continuously fed column didn't show methanogenic toxicity, therefore the main toxic compounds in the wastewater were removed during anaerobic treatment.     

Investigation of soluble microbial products in anaerobic wastewater treatment effluents

BACKGROUND: Anaerobic treatment of distillery wastewater, purified terephthalic acid (PTA) wastewater and synthetic glucose wastewater was conducted and the soluble microbial products (SMPs) in the anaerobic effluent were investigated. RESULTS: Gas chromatography‐mass spectrometry (GC‐MS) analysis showed that apart from the degradation residuals, the long chain alkanes, esters and acids totally accounted for the majority of the low molecular weight (MW) SMPs in the effluents. The sum of protein and polysaccharide SMPs in the effluent increased from 50 to 323 mg L^?1 when organic loading rate (OLR) was increased from 2.5 to 10.5 kg m^?3 d^?1; when influent COD changed from 5000 to 10 000 mg L^?1, the sum increased from 54 to 98 mg L^?1 at about the same OLR of 5 kg m^?3 d^?1. CONCLUSION: The results showed that SMPs made up an important proportion of organic compounds in the anaerobic effluents; the main low MW SMPs were long chain alkanes, esters and acids. The protein and polysaccharide SMPs increased with the increasing OLR, while higher influent concentrations led to higher concentrations of SMPs at the same OLR. From the variation of protein and polysaccharide SMPs along the height of the anaerobic reactors, it could be inferred that the methanogens might have contributed more in SMP consumption. Copyright © 2010 Society of Chemical Industry     

The effect of organic loading rate on the anaerobic digestion of two‐phase olive mill solid residue derived from fruits with low ripening index

A study of the effect of organic loading rate on the performance of anaerobic digestion of two‐phase olive mill solid residue (OMSR) was carried out in a laboratory‐scale completely stirred tank reactor. The reactor was operated at an influent substrate concentration of 162 g chemical oxygen demand (COD) dm^?3. The organic loading rate (OLR) varied between 0.8 and 11.0 g COD dm^?3 d^?1. COD removal efficiency decreased from 97.0% to 82.6% when the OLR increased from 0.8 to 8.3 g COD dm^?3 d^?1. It was found that OLRs higher than 9.2 g COD dm^?3 d^?1 favoured process failure, decreasing pH, COD removal efficiency and methane production rates (Q_M). Empirical equations described the effect of OLR on the process stability and the effect of soluble organic matter concentration on the total volatile fatty acids (TVFA)/total alkalinity (TAlk) ratio (ρ). The results obtained demonstrated that rates of substrate uptake were correlated with concentration of biodegradable COD, through an equation of the Michaelis–Menten type. The kinetic equation obtained was used to simulate the anaerobic digestion process of this residue and to obtain the theoretical COD degradation rates in the reactor. The small deviations obtained (equal to or lower than 10%) between values calculated through the model and experimental values suggest that the proposed model predicts the behaviour of the reactor accurately. Copyright © 2007 Society of Chemical Industry     

Effect of coagulation on palm oil mill effluent and subsequent treatment of coagulated sludge by anaerobic digestion

A new effluent treatment scheme is proposed for treating palm oil mill effluent based on coagulation and anaerobic digestion of coagulated sludge. The effectiveness of anionic (N9901) and cationic (N9907) polyelectrolytes manufactured by NALCO (Malaysia) was evaluated both as coagulant and coagulant aid. The results showed that the anionic and cationic polyelectrolytes were best suited as a coagulant aid, and the cationic polyelectrolyte showed better performance than the anionic polyelectrolyte. For an influent chemical oxygen demand (COD) concentration of 59 700 mg L^?1 at an alum dosage of 1700 mg L^?1, the residual COD, suspended solid removal, sludge volume and pH were found to be 39 665 mg L^?1, 87%, 260 mL L^?1 and 6.3, respectively. For the above influent COD and alum dosage with the addition of 2 mg L^?1 of cationic polyelectrolyte as coagulant aid, the results were 30 870 mg L^?1, 90%, 240 mL L^?1 and 6.2, respectively. The sludge resulting from the coagulation process using alum as coagulant and cationic polyelectrolyte as coagulant aid was tested for its digestibility in an anaerobic digester. The quantity of biogas generated per gram of volatile solids (VS) destroyed at a loading rate of 26.7 ± 0.5 and 35.2 ± 0.4 g VS L^?1 d^?1 was found to be 0.68 and 0.72 L g^?1 VS destroyed. The anaerobic biomass when subjected to varying alum dosage in the coagulated palm oil sludge did not exhibit inhibition as the digester performance was in conformity with the regular treatment process Copyright © 2006 Society of Chemical Industry     

Treatment of settled piggery waste by a down‐flow anaerobic fixed bed reactor

A study of the effect of organic volumetric loading rate (B_V) on the performance of a down‐flow anaerobic fixed bed reactor (DFAFBR) treating settled piggery waste was carried out at a range of between 1.1 and 6.8 g COD dm^?3 d^?1. The reactor operated at good removal efficiencies and stability under the operational conditions studied. Logarithmic empirical equations described adequately the removal efficiency for different parameters studied (COD, SCOD, BOD, TS, VS, TSS, VSS and phosphorous). Although process stability was affected by the increase of B_V, process failure was not observed. A logarithmic relationship was found to describe the influence of B_V on the TVFA/alkalinity ratio (p). A linear correlation was found between the effluent substrate concentration and the values of p and between p and the CO₂/CH₄ ratio in the biogas. The effect of the hydraulic volumetric loading rate (H_V) on the flow pattern of the reactor was evaluated. Dispersion number (D_n) was in the range of 0.17–0.37 for the maximum and minimum values of H_V studied, respectively. The ratio between the real and theoretical HRT increased as the H_V decreased. These results demonstrate that axial dispersion increased as the H_V and the Reynolds number decreased. Due to the hydraulic behaviour of the reactor, the kinetic model developed by Lawrence and McCarty was used for describing the experimental results obtained. Maximum specific substrate removal rate (K), specific organic loading rate constant (K_L), microbial decay coefficient (K_d), microbial yield coefficient (Y), maximum microbial growth rate (U_M) and saturation constant (K_S) were found to be: 3.1 (g COD g VSS^?1 d^?1), 3.0 (g COD g VSS^?1 d^?1), 0.062 (d^?1), 0.15 (g VSS g COD removed^?1), 0.39 (d^?1) and 2.6 (g SCOD dm^?3), respectively. Copyright © 2004 Society of Chemical Industry     

Start-up and Operation of Laboratory-Scale Thermophilic Upflow Anaerobic Sludge Blanket Reactors Treating Vegetable Processing Wastewaters

Thermophilic anaerobic treatment of hot vegetable processing wastewaters was studied in laboratory-scale UASB reactors at 55°C. The high-strength wastewater streams, deriving from steam peeling and blanching of carrot, potato and swede were used. The reactors were inoculated with mesophilic granular sludge. Stable thermophilic methanogenesis with about 60% COD removal was reached within 28 days. During the 134 day study period the loading rate was increased up to 24 kg COD m⁻³ day⁻¹. High treatment efficiency of more than 90% COD removal and concomitant methane production of 7·3 m³ CH₄ m⁻³ day⁻¹ were achieved. The anaerobic process performance was not affected by the changes in the wastewater due to the different processed vegetables. The results demonstrated the feasibility of thermophilic anaerobic treatment of vegetable processing wastewaters in UASB reactors. © 1997 SCI.     

The start‐up of anaerobic sequencing batch reactors at 20 °C and 25 °C for the treatment of slaughterhouse wastewater

The objective of this research was to evaluate the feasibility, the stability and the efficiency of a start‐up at 20 °C and 25 °C of anaerobic sequencing batch reactors (ASBRs) treating slaughterhouse wastewater. Influent chemical oxygen demand (COD) and suspended solids concentrations averaged 7500 and 1700 mg dm^?3, respectively. Reactor start‐up was completed in 168 and 136 days at 20 °C, and 25 °C, respectively. The start‐up process was stable at both temperatures, except for a short period at 20 °C, when effluent volatile fatty acid (VFA) concentrations increased from an average of 40 to 400 mg dm^?3. Effluent quality varied throughout start‐up, but in the last 25 days of the experiment, as the ASBRs were operated under organic loading rates of 2.25 ± 0.21 and 2.86 ± 0.24 kg m^?3 d^?1 at 20 °C and 25 °C, respectively, total COD was reduced by 90.3% ± 1.3%. Methanogenesis was not a limiting factor during start‐up. At 20 °C, the limiting factor was the acidification of the soluble organics and, to a smaller extent, the reduction of propionic, isobutyric and isovaleric acids into lower VFAs. At 25 °C, the limiting factor was the hydrolysis of particulate organics. To minimize biomass loss during the start‐up period, the organic loading rate should be increased only when 75 –80% of the COD fed has been transformed into methane within the design hydraulic retention time. © 2001 Society of Chemical Industry     

Comparison of intermittent and continuous loading of stationary fixed-film reactors for methane production from wastes

Intermittent loading of a stationary fixed-film reactor (approximately 35 dm³) with bean-blanching or pear-peeling waste allowed the same or higher loading rates and rates of methane production as continuous loading. Slug-loading one-or two-times daily or continuous loading for 7 out of 24 h allowed loading rates of up to 26 kg Chemical Oxygen Demand (COD) day^?1 m^?3 and rates of methane production of up to 3.5 m³ day^?1 m^?3 packing void volume, the latter almost 30% higher than during continuous (24 h) loading. The efficiency of converting COD into methane decreased noticeably at high intermittent loading rates. During one-or two-times daily loading large amounts of hydrogen were also produced during the first 1–2 h after loading.     

Mixing characteristics and performance of the anaerobic upflow blanket filter (UBF) reactor

Mixing characteristics (using a radioactive tracer) and reactor performance of the upflow blanket filter (UBF) reactor operated at different loading rates (up to 32 kg chemical oxygen demand (COD) m^?3 day^?1) were compared. The results indicated that mixing profiles of the reactor operated with effluent recirculation and without biomass were of the perfectly mixed type. Operation without recirculation resulted in about 18% dead space. The filter made of plastic rings and located in the top third of the reactor had no negative effect on reactor mixing. Operation at loading rates of up to 25 kg COD m^?3 day^?1 permitted a soluble COD removal rate of 95% with a methane production rate of 5.9 m³ m^?3 day^?1. At higher loading rates, the efficiency of COD reduction decreased with a decrease of the specific acetoclastic activity to 0.5 kg acetate removed per kg volatile suspended solids (VSS) day^?1. At all loading rates studied it was observed that the performance was not related to the mixing characteristics, which had remained of the perfectly mixed type with an occasional small dead space (below 10%). The good mixing characteristics of the UBF reactor coupled with the high biomass content and the effective action of the filter make this reactor one of the most promising designs for the treatment of soluble wastes.