Biodiesel,emulsified biodiesel and dimethyl ether as pilot fuels for natural gas fuelled engines

Dual-fuelling in compression–ignition (CI) engines is a mode of combustion where a small pilot injection of high-cetane fuel (i.e. diesel) ignites a premixed high-octane fuel (i.e. methane) and air mixture. This allows conventional CI engines to lower their emissions of smoke and nitrogen oxides (NO_x)$({\text{NO}}_x)$ while maintaining their high thermal efficiencies. However, poor ignitability of the main fuel–air charge results in increased emissions of unburnt hydrocarbons (HC) and carbon monoxide (CO). Conventional pilot fuels such as diesel and biodiesel (methyl esters transesterified from raw plant oil) have been researched extensively in prior work, showing that in terms of performance and emissions they perform fairly similarly. This is because the physical, chemical and combustion properties of various methyl esters are comparable to those of conventional diesel. In order to reduce these emissions of HC and CO, alternative pilot fuels need to be considered. As fuels employed during normal CI engine operation, both dimethyl ether (DME, a gaseous CI engine fuel) and water-in-fuel emulsions (conventional biodiesel mixed with varying concentrations of water) have shown that they reduce smoke and _NOx${\mathrm{NO}}_x$ emissions significantly, while improving combustion quality. In this work, the performance of DME and water-in-biodiesel emulsions as pilot fuels was assessed. It was seen that the water-in-biodiesel emulsions did not perform as well as expected, as increased HC and CO emissions coupled with a mild change in _NOx${\mathrm{NO}}_x$ levels was encountered (compared to conventional pilot fuel, in this case neat biodiesel). The emulsions performed very poorly as pilot fuels below a certain BMEP threshold. DME, while producing higher levels of HC and CO than neat biodiesel, managed to reduce _NOx${\mathrm{NO}}_x$ significantly compared to neat biodiesel. Emissions of HC and CO, while higher than neat biodiesel, were not as high as levels seen with the emulsions. Thermal efficiency levels were generally maintained with the liquid pilot fuels, with the DME pilot producing comparatively lower levels.     

Experimental study on thermal efficiency and emission characteristics of a lean burn hydrogen enriched natural gas engine

In order to analyze the effect of hydrogen addition on natural gas (NG) engine's thermal efficiency and emission, an experimental research was conducted on a spark ignition NG engine using variable composition hydrogen/CNG mixtures (HCNG). The results showed that hydrogen enrichment could significantly extend the lean operation limit, improve the engine's lean burn ability, and decrease burn duration. However, nitrogen oxides (NO_x)$({\text{NO}}_x)$ were found to increase with hydrogen addition if spark timing was not optimized according to hydrogen's high burn speed. Also found when spark timing was set at constant was that hydrogen addition actually increases heat transfer out of the cylinder due to smaller quenching distance and higher combustion temperature, thus is not good to improve thermal efficiency if combined with the effect of non-ideal spark timing. But if spark timing was retarded to MBT, taking advantage of hydrogen's high burn speed, _NOx${\mathrm{NO}}_x$ emissions exhibited no obvious increase after hydrogen addition and engine thermal efficiency increased with the increase of hydrogen fraction. Unburned hydrocarbon always decreased with the increase of hydrogen fraction.     

Performance and combustion characteristics of a direct injection SI hydrogen engine

Hydrogen with low spark-energy requirement, wide flammability range and high burning velocity is an important candidate for being used as fuel in spark-ignition engines. It also offers CO₂ and HC free combustion and lean operation resulting in lower _NOx${\mathrm{NO}}_x$ emissions. However, well examined external mixing of hydrogen with intake air causes backfire and knock especially at higher engine loads. In addition, low heating value per unit of volume of hydrogen limits the maximum output power. In this study, attention was paid to full usage of hydrogen advantage employing internal mixing method. Hydrogen was directly injected into cylinder of a single-cylinder test engine using a high-pressure gas injector and effects of injection timing and spark timing on engine performance and _NOx${\mathrm{NO}}_x$ emission were investigated under wide engine loads. The results indicate that direct injection of hydrogen prevents backfire, and that high thermal efficiency and output power can be achieved by hydrogen injection during late compression stroke. Moreover, by further optimization of the injection timing for each engine load, _NOx${\mathrm{NO}}_x$ emission can be reduced under the high engine output conditions.     

An experimental investigation of hydrogen-enriched air induction in a diesel engine system

Diesel engines are the most trusted power sources in the transportation industry. They intake air and emit, among others, the pollutants _NOX${\mathrm{NO}}_X$ and particulate matter. Continuous efforts and tests have tried to reduce fuel consumption and exhaust emissions of internal combustion engines. Alternative fuels are key to meeting upcoming stringent emission norms. We study hydrogen as an air-enrichment medium with diesel as an ignition source in a stationary diesel engine system to improve engine performance and reduce emissions. Stationary engines can be operated with less fuel than neat diesel operations, resulting in lower smoke levels and particulate emissions. Hydrogen (_H2)$({\mathrm{H}}_2)$-enriched air systems in diesel engines enable the realization of higher brake thermal efficiency, resulting in lower specific energy consumption (SEC). _NOX${\mathrm{NO}}_X$ emissions are reduced from 2762 to 515 ppm with 90% hydrogen enrichment at 70% engine load. At full load, _NOX${\mathrm{NO}}_X$ emission marginally increases compared to diesel operation, while both smoke and particulate matter are reduced by about 50%. The brake thermal efficiency increases from 22.78% to 27.9% with 30% hydrogen enrichment. Thus, using hydrogen-enriched air in a diesel engine produces less pollution and better performance.     

Effect of pressure and equivalence ratio on the ignition characteristics of dimethyl ether-hydrogen mixtures

Experimental and numerical study on the effect of pressure and equivalence ratio on the ignition delay times of the DME/H₂/O₂ mixtures diluted in argon were conducted using a shock tube and CHEMKIN II package at equivalence ratios of 0.5–2.0, pressures of 1.2–10 atm and hydrogen fractions of 0–100%. It was found that the measured ignition delay times of the DME/H₂ mixtures demonstrate three ignition regimes. For the DME/H₂ mixture at XH₂$X_{{\text{H}}_2}$ ≤80%, the ignition is controlled by the DME chemistry and ignition delay times present a typical Arrhenius pressure dependence and weak equivalence ratio dependence. For the DME/H₂ mixture at 80% < XH₂$X_{{\text{H}}_2}$ < 98%, the ignition is controlled by the combined chemistries of DME and hydrogen, and the ignition delay times give higher ignition activation energy at higher pressures and a typical Arrhenius equivalence ratio dependence. However, for the DME/H₂ mixture at XH₂$X_{{\text{H}}_2}$≥98%, the ignition is controlled by the hydrogen chemistry and ignition delay time shows complex pressure dependence and weak equivalence ratio dependence. Comparison of the measurements of neat DME and neat hydrogen with the calculations using three generally accepted mechanisms, NUIG Aramco Mech 1.3 [1], LLNL DME Mech 2, 3 and 4 and Princeton-Zhao Mech [5], shows that NUIG Aramco Mech 1.3 gives the best predictions and can well capture the pressure and equivalence ratio dependence at various hydrogen fractions. The sensitivity and normalized H-radicals consumption analysis were performed using NUIG Aramco Mech 1.3 and the key reactions that control the ignition characteristics of DME/H₂ mixtures were revealed. Further chemical kinetic analysis was made to interpret the ignition delay time dependence on pressure and equivalence ratio at varied hydrogen fractions.     

The ignition,combustion and flame structure of carbon monoxide/hydrogen mixtures. Note 1: Detailed kinetic modeling of syngas combustion also in presence of nitrogen compounds

The kinetic characterization of the _H2/CO${\mathrm{H}}_2/\mathrm{CO}$ system is of interest right now due mainly to its role in sustainable combustion processes. The aim of this paper is to revise and validate a detailed kinetic model of hydrogen and carbon monoxide mixture combustion with particular focus not only on _NOx${\mathrm{NO}}_x$ formation but also on interactions with nitrogen species. Model predictions and experimental measurements are discussed and compared across a wide range of operating conditions. This study moves from the detailed analysis of species profiles in syngas oxidation in flow reactor and laminar premixed flames to global combustion properties (ignition delay times and laminar flame speeds) by referring to a large set of literature data. According to recent literature, the validation of the kinetic scheme confirmed there was a need to slightly modify the kinetic parameters of two relevant _CO2${\mathrm{CO}}_2$ formation reactions (CO+OH=_CO2+H$\mathrm{CO}+\mathrm{OH}={\mathrm{CO}}_2+\mathrm{H}$ and CO+O+M=_CO2+M$\mathrm{CO}+\mathrm{O}+\mathrm{M}={\mathrm{CO}}_2+\mathrm{M}$) and of reaction HONO+OH=_NO2+_H2O$\mathrm{HONO}+\mathrm{OH}={\mathrm{NO}}_2+{\mathrm{H}}_2\mathrm{O}$.     

An experimental study on performance and emission characteristics of a hydrogen fuelled spark ignition engine

In the present paper, the performance and emission characteristics of a conventional four cylinder spark ignition (SI) engine operated on hydrogen and gasoline are investigated experimentally. The compressed hydrogen at 20  MPa has been introduced to the engine adopted to operate on gaseous hydrogen by external mixing. Two regulators have been used to drop the pressure first to 300 kPa, then to atmospheric pressure. The variations of torque, power, brake thermal efficiency, brake mean effective pressure, exhaust gas temperature, and emissions of _NOx${\mathrm{NO}}_x$, CO, _CO2${\mathrm{CO}}_2$, HC, and _O2${\mathrm{O}}_2$ versus engine speed are compared for a carbureted SI engine operating on gasoline and hydrogen. Energy analysis also has studied for comparison purpose. The test results have been demonstrated that power loss occurs at low speed hydrogen operation whereas high speed characteristics compete well with gasoline operation. Fast burning characteristics of hydrogen have permitted high speed engine operation. Less heat loss has occurred for hydrogen than gasoline. _NOx${\mathrm{NO}}_x$ emission of hydrogen fuelled engine is about 10 times lower than gasoline fuelled engine. Finally, both first and second law efficiencies have improved with hydrogen fuelled engine compared to gasoline engine. It has been proved that hydrogen is a very good candidate as an engine fuel. The obtained data are also very useful for operational changes needed to optimize the hydrogen fueled SI engine design.     

Experimental and modeling study of hydrogen/syngas production and particulate emissions from a natural gas-fueled partial oxidation engine

In this study, a combustion model was first applied to conditions representing varying compression ratios and equivalence ratios to investigate engine exhaust composition from partial oxidation (POX) of natural gas in reciprocating engines. The model was experimentally validated over a range of equivalence ratios from 1.3 to 1.6 with a spark-ignited single cylinder engine fueled by natural gas. The modeling results matched well with engine gaseous emission data over the experimental range. The model was also extended to higher equivalence ratios to predict _H2${\mathrm{H}}_2$ and CO production at engine conditions and stoichiometries representative of homogeneous charge compression ignition (HCCI) engine operation. Secondly, over the same experimental range of equivalence ratios, particulate samples were taken to determine both total particulate mass production (g/hp h) via gravimetric measurement as well as particle size distribution and loading via a scanning mobility particle sizer (SMPS). While experiments indicate hydrogen yields up to 11% using spark ignition (SI), modeling results indicate that greater than 20% _H2${\mathrm{H}}_2$ yield may be possible in HCCI operation. Over the experimental range, rich-burn particulate matter (PM) production is no greater than that from typical lean-burn operation. Finally, an energy balance was performed over the range of engine experimental operation.     

Analysis of the benefits of carbon credits to hydrogen addition to midsize gas turbine feedstocks

The addition of hydrogen to the natural gas feedstocks of midsize (30–150 MW) gas turbines was analyzed as a method of reducing nitrogen oxides (_NOx)$({\mathrm{NO}}_x)$ and _CO2${\mathrm{CO}}_2$ emissions. In particular, the costs of hydrogen addition were evaluated against the combined costs for other current _NOx${\mathrm{NO}}_x$ and _CO2${\mathrm{CO}}_2$ emissions control technologies for both existing and new systems to determine its benefits and market feasibility. Markets for _NOx${\mathrm{NO}}_x$ emissions credits currently exist in California and the Northeast States and are expected to grow. Although regulations are not currently in place in the United States, several other countries have implemented carbon tax and carbon credit programs. The analysis thus assumes that the United States adopts future legislation similar to these programs. Therefore, potential sale of emissions credits for volunteer retrofits was also included in the study. It was found that hydrogen addition is a competitive alternative to traditional emissions abatement techniques under certain conditions. The existence of carbon credits shifts the system economics in favor of hydrogen addition.     

Effects of bluff-body shape on LPG–H2 jet diffusion flame

The effects of bluff-body lip thickness on the several physical parameters like flame length, radiant fraction, gas temperature and _NOx${\mathrm{NO}}_x$ emissions in liquefied petroleum gas (LPG)–H₂ jet diffusion flame are investigated experimentally. Results indicate that the flame length reduces with the addition of hydrogen in the bluff-body stabilized flame, which can be attributed to the enhanced reactivity and residence time of the mixture gases. Moreover, with increasing lip thickness of the bluff body, the flame length also gets reduced. The soot free length fraction (SFLF) is observed to be enhanced with H₂ addition to the fuel stream. In contrast, the SFLF gets reduced with increasing lip thickness repetition, which is due to the reduced induction period of soot formation. The emission index of _NOx${\mathrm{NO}}_x$ (_EINOx${\mathrm{EINO}}_x$) is found to be attenuated in coaxial burner with hydrogen addition. In contrast it is observed to be enhanced in bluff-body stabilized flame. The former is due to the reduction in residence time of gas mixture, whereas the latter can be explained on the basis of increased flame temperature. Besides this, _NOx${\mathrm{NO}}_x$ emission level is also found to be enhanced with increasing lip thickness due to enhanced residence time.     

Hydrogen injection as additional fuel in gas turbine combustor. Evaluation of effects

Industrial gas turbines fuelled by fossil fuels have been used widely in power generation and combined heat and power for many years. However they have to meet severe _NOx${\mathrm{NO}}_x$, CO and _CO2${\mathrm{CO}}_2$ (greenhouse effect) emissions legislation in many countries. This paper reports a study on injection of small quantities of hydrogen in a hydrocarbon fuelled burner like additionally fuel to reduce the pollutants emissions. Hydrogen is injected in the primary zone, premixed with the air. Using this injection together lean primary zone, it is possible to reduce the _NOx${\mathrm{NO}}_x$ level while CO an HC levels remains approximately constant.     

Experimental study of combustion of hydrogen–syngas/methane fuel mixtures in a porous burner

Lean premixed combustion of hydrogen–syngas/methane fuel mixtures was investigated experimentally to demonstrate fuel flexibility of a two-section porous burner. The un-insulated burner was operated at atmospheric pressure. Combustion was stabilized at the interface of silicon-carbide coated carbon foam of 26 pores per centimeter (ppcm) and 4 ppcm. Methane (CH₄) content in the fuel was decreased from 100% to 0% (by volume), with the remaining amount split equally between carbon monoxide (CO) and hydrogen (H₂), the two reactive components of the syngas. Experiments for different fuel mixtures were conducted at a fixed air flow rate, while the fuel flow rate was varied to obtain a range of adiabatic flame temperatures. The CO and nitric oxide (_NOx${\mathrm{NO}}_x$) emissions were measured downstream of the porous burner, in the axial direction to identify the post-combustion zone and in the transverse direction to quantify combustion uniformity. For a given adiabatic flame temperature, increasing H₂/CO content in the fuel mixture decreased both the CO and _NOx${\mathrm{NO}}_x$ emissions. Presence of H₂/CO in the fuel mixture also decreased temperature near the lean blow-off limit, especially for higher percentages of CO and H₂ in the fuel.     

Combustion behaviors of a direct-injection engine operating on various fractions of natural gas–hydrogen blends

Combustion behaviors of a direct injection engine operating on various fractions of natural gas–hydrogen blends were investigated. The results showed that the brake effective thermal efficiency increased with the increase of hydrogen fraction at low and medium engine loads and high thermal efficiency was maintained at the high engine load. The phase of the heat release curve advanced with the increase of hydrogen fraction in the blends. The rapid combustion duration decreased and the heat release rate increased with the increase of hydrogen fraction in the blends. This phenomenon was more obviously at the low engine speed, suggesting that the effect of hydrogen addition on the enhancement of burning velocity plays more important role at relatively low cylinder air motion. The maximum mean gas temperature and the maximum rate of pressure rise increased remarkably when the hydrogen volumetric fraction exceeds 20% as the burning velocity increases exponentially with the increase of hydrogen fraction in fuel blends. Exhaust HC and _CO2${\mathrm{CO}}_2$ concentrations decreased with the increase of the hydrogen fraction in fuel blends. Exhaust _NOx${\mathrm{NO}}_x$ concentration increased with the increase of hydrogen fraction at high engine load. The study suggested that the optimum hydrogen volumetric fraction in natural gas–hydrogen blends is around 20% to get the compromise in both engine performance and emissions.     

A review of the interference of carbon containing fly ash with air entrainment in concrete

Industrial utilization of fly ash from pulverized coal combustion plays an important role in environmentally clean and cost effective power generation. Today, the primary market for fly ash utilization is as pozzolanic additive in the production of concrete. However, the residual carbon in fly ash may interfere with air entraining admixtures (AEAs) added to enhance air entrainment in concrete in order to increase its workability and resistance toward freezing and thawing conditions. The problem has increased with implementation of low-_NOx${\mathrm{NO}}_x$ combustion technologies.     

Intake charge dilution effects on control of nitric oxide emission in a hydrogen fueled SI engine

Though hydrogen fueled spark ignition engine can operate at high thermal efficiency with almost zero emission of HC and CO, the high level of _NOx${\mathrm{NO}}_x$ poses problems. The high combustion temperature and lean mixtures used are the reasons. In this work, the effect of _N2${\mathrm{N}}_2$, _CO2${\mathrm{CO}}_2$ and hot EGR gas as diluents in the intake charge to suppress NO emission in a manifold injected hydrogen fueled SI engine was studied. Nitrogen as a diluent is not so effective at low loads while inducting smaller amounts, but very effective at higher loads where the mixture becomes richer and the dilution effect (oxygen depletion) is significant. On other hand, carbon dioxide is a good diluent with relatively better thermal effect and diluent effect and effectively controls NO emission at all output regions. However this is at the expense of thermal efficiency. Recirculating hot exhaust gas which contains both _N2${\mathrm{N}}_2$ and steam comes in between _N2${\mathrm{N}}_2$ and _CO2${\mathrm{CO}}_2$ in terms of its effectiveness. On the whole _N2${\mathrm{N}}_2$ is the most effective as it has minimum impact on thermal efficiency for a given level of permissible NO emission. Thus it is felt that cold EGR could be a good option. In all cases, a good control system is necessary to supply correct quantity of diluent.     

Numerical study of effects of reformed exhaust gas recirculation (REGR) on dimethyl ether HCCI combustion

The effects of reformed exhaust gas recirculation (REGR) on combustion and emissions of dimethyl ether (DME) homogeneous charge compression ignition (HCCI) engines are studied by multi-dimensional CFD coupled with chemical kinetic model. The results show that REGR combing EGR and DME reformed gases (DRG) improves combustion and emissions. REGR can delay ignition time by both EGR and DRG, and makes main combustion closer to top dead center (TDC), which is beneficial to reducing compression negative work and broadening load range of HCCI engines. The interaction of DRG and EGR helps avoid too high pressure rise rate or low power performance when being applied independent of each other. HC, CO and NO_x emissions can be controlled simultaneously by REGR. Both advantages of DRG and EGR are used to decrease the emissions of HCCI engines by REGR, while the disadvantages of high emissions are alleviated when one of them is applied.     

Increase of passenger car engine efficiency with low engine-out emissions using hydrogen–natural gas mixtures: A thermodynamic analysis

In this study a state of the art passenger car natural gas engine was optimised for hydrogen natural gas mixtures and high exhaust gas recirculation (EGR) rates in the part load domain. With optimal combinations of spark timing (ST) and EGR rate the achievements are significant efficiency increase with substantially lower engine-out _NOx${\mathrm{NO}}_x$ while total unburned hydrocarbons or CO-engine-out emissions are not affected. Comprehensive investigations of the parameter space using design of experiments (DoE) algorithms provided a complete picture of the potential of such applications. Combustion analysis on the other hand allowed to identify improvements on the basis of accelerated combustion caused by the hydrogen as well as the reduced gas exchange losses due to EGR and associated less required throttling for a given engine output. The best combinations of EGR rate, hydrogen-fraction in the fuel and ST exhibited optimal in-cylinder pressure characteristics accompanied by moderate combustion peak temperatures and low expansion cylinder temperatures.     

Measurements and kinetic study on ignition delay times of propane/hydrogen in argon diluted oxygen

Measurements on ignition delay times of propane/hydrogen mixtures in argon diluted oxygen were conducted for hydrogen fractions in the fuel mixtures (XH₂)$\left(X_{{\text{H}}_2}\right)$ from 0 to 100%, pressures of 1.2, 4.0 and 10 atm, and temperatures from 1000 to 1600 K using the shock-tube. Results show that for XH₂$X_{{\text{H}}_2}$ less than 70%, ignition delay time shows a strong Arrhenius temperature dependence and it decreases with the increase of pressure, while for XH₂$X_{{\text{H}}_2}$ larger than 90%, there is a crossover pressure dependence of the ignition delay time with increasing temperature. Numerical studies were made using the selected kinetic mechanisms and results show that the predicted ignition delay time gives a reasonable agreement with the measurements. Both measurements and predictions show that for XH₂$X_{{\text{H}}_2}$ less than 70%, the ignition delay time is only moderately decreased with the increase of XH₂$X_{{\text{H}}_2}$, indicating that hydrogen addition has weak effect on ignition enhancement. Sensitivity analysis reveals the key reactions that control the simulation of ignition delay time. Kinetic study is made to interpret the ignition delay time dependence on pressure and XH₂$X_{{\text{H}}_2}$.     

Catalytic hydrogen storage in cerium nickel and zirconium (or aluminium) mixed oxides

Interaction of hydrogen with a series of cerium nickel and zirconium (or aluminium) mixed oxides _CeM0.5NixOy${\mathrm{CeM}}_{0.5}{\mathrm{Ni}}_x{\mathrm{O}}_y$ (M=Zr$\mathrm{M}=\mathrm{Zr}$ or Al, 0?x?3$0?x?3$) has been studied in the 50–800 °C temperature range. Hydrogenation of 2-methyl-1,3-diene (isoprene) under helium flow in the absence of gaseous hydrogen is used to reveal and titrate reactive hydrogen species present in the solid previously treated under _H2${\mathrm{H}}_2$ at various temperatures. The _CeM0.5NixOy${\mathrm{CeM}}_{0.5}{\mathrm{Ni}}_x{\mathrm{O}}_y$ mixed oxides are large catalytic hydrogen reservoirs and among the solids studied, the highest amount of hydrogen (about 10 wt%, 540 g/L) is stored in _CeZr0.5Ni1Oy${\mathrm{CeZr}}_{0.5}{\mathrm{Ni}}_1{\mathrm{O}}_y$ pretreated in _H2${\mathrm{H}}_2$ at about 200 °C. Compared to the binary mixed oxides _CeNixOy${\mathrm{CeNi}}_x{\mathrm{O}}_y$, the presence of M allows to increase the hydrogen storage and give a better stability to the system, in particular, with temperature. Different physico-chemical techniques (TPR, TGA …) have been used to characterize the solids studied.     

Effects of hydrogen addition and cylinder cutoff on combustion and emissions performance of a spark-ignited gasoline engine under a low operating condition

Because of the low combustion temperature and high throttling loss, SI (spark-ignited) engines always encounter dropped performance at low load conditions. This paper experimentally investigated the co-effect of cylinder cutoff and hydrogen addition on improving the performance of a gasoline-fueled SI engine. The experiment was conducted on a modified four-cylinder SI engine equipped with an electronically controlled hydrogen injection system and a hybrid electronic control unit. The engine was run at 1400 rpm, 34.5 Nm and two cylinder cutoff modes in which one cylinder and two cylinders were closed, respectively. For each cylinder closing strategy, the hydrogen energy fraction in the total fuel (βH₂)$\left({\beta }_{{\text{H}}_2}\right)$ was increased from 0% to approximately 20%. The test results demonstrated that engine indicated thermal efficiency was effectively improved after cylinder cutoff and hydrogen addition, which rose from 34.6% of the original engine to 40.34% of the engine operating at two-cylinder cutoff mode and βH₂=20.41%${\beta }_{{\text{H}}_2}=20.41\%$. Flame development and propagation periods were shortened with the increase of the number of closed cylinders and hydrogen blending ratio. The total cooling loss for all working cylinders, and tailpipe HC (hydrocarbons), CO (carbon monoxide) and CO₂ (carbon dioxide) emissions were reduced whereas tailpipe NO_x (nitrogen oxide) emissions were increased after hydrogen addition and cylinder closing.