Application of capillary electrophoresis of characterizing interactions between drugs and bile salts. Part I

Capillary electrophoresis offers a new way of characterizing interactions between different bile salts and drugs. The observed interactions were characterized with modified model functions known from affinity capillary electrophoresis (ACE) an micellar electrokinetic capillary electrophoresis (MECC). The methodical background of both methods is the change of the ionic mobility of the drug caused by partition between phases and aggregation with the bile salt molecules, respectively. This phenomenon is described by two different physicochemical models. A parameter estimation was carried out in order to obtain the partition coefficients KP as well as constants for the aggregate formation KA. Furthermore, an expression about the specific molar volume of the micelles and stoichiometric coefficients can be given.     

Altered mRNA expression of the neuronal nitric oxide synthase gene in Hirschsprung''s disease

Deoxyribonuclease I (DNase I) is an actin monomer-sequestering actin binding protein (ABP) that inhibits the rate and extent of actin polymerisation in vitro by forming a high affinity, stoichiometric 1:1 complex. Using capillary zone electrophoresis (CZE), we have studied the interaction between G-actin and DNase I to evaluate the capability of CZE to determine the dissociation constant (K(d) value) for this interaction. We used (i) an uncoated fused-silica capillary and ultraviolet (UV) detection at 214 nm; (ii) a hydrophilic-coated capillary with UV detection at 214 nm; and (iii) a hydrophilic-coated capillary with laser-induced fluorescence (LIF) detection. Using procedure (ii), a K(d) value of approximately 0.03 microM was obtained by simulation of binding data. We conclude that CZE combined with a LIF detector has the capacity to extend the determination of K(d) values from the micromolar range to the nanomolar range. Subsequent determination of K(d) values for other actin-binding proteins should provide information on interactions between the binding sites on actin for these proteins and their spatial relationship.     

锰离子与草酸共存体系的毛细管电泳相互作用分析

以咪唑作为背景电解质 ,在 pH 5.0 1,运行电压为 2 0kV ,缓冲溶液组成为咪唑和乙酸盐的条件下 ,采用毛细管电泳间接紫外检测方法测定了缓冲溶液中加入不同浓度草酸后锰离子迁移时间。根据迁移时间的变化 ,并利用毛细管电泳相互作用方法中的峰漂移模型 ,求出了锰离子与草酸共存体系的表观结合常数 ,其结果与文献值较为符合。     

Correlation of plasma protein separation patterns obtained by two-dimensional polyacrylamide gel electrophoresis and by capillary electrophoresis

We used three different electrophoretic techniques for the analysis of human plasma proteins: (i) two-dimensional polyacrylamide gel electrophoresis (2-D PAGE), with sodium dodecyl sulfate (SDS) used only in slab gel electrophoresis; (ii) capillary isoelectric focusing (CIEF) with no denaturants; (iii) linear polyacrylamide (LPA)-filled capillary electrophoresis with SDS (SDS-CE). With technique (i), data on isoelectric point and molecular size of plasma proteins can be obtained. Techniques (ii) and (iii) are suited to obtain quantitative information on proteins. The separation principle used in technique (ii) is closely related to that used in the first dimension of technique (i), and that used in technique (iii) related to that in the second dimension of technique (i). Therefore, we could successfully correlate protein separation patterns obtained by 2-D PAGE and those obtained by capillary electrophoresis. The advantages of correlating data obtained by various electrophoretic techniques in the course of constructing a comprehensive database on human plasma proteins are discussed.     

Affinity capillary electrophoresis

The application of affinity capillary electrophoresis (ACE) to the study of molecular interactions is reviewed. ACE appears to be a sensitive, versatile and convenient tool to obtain reliable data on binding constants and stoichiometries of interacting systems using the Hummel-Dreyer method and variants thereof. A powerful feature is the possibility to analyze simultaneously the affinity of a large number of compounds for the same ligand, making it a promising tool for the screening of large combinatorial libraries.     

Selectivity in capillary electrophoresis: the use of proteins

Proteins, by their very diverse nature, provide a wide variety of options for generating selectivity in capillary electrophoresis (CE). Their use in different modes of CE will be considered in this review. Proteins added in solution to the background electrolyte allow separations to be made in a similar fashion to other electrokinetic chromatography methods, e.g., micellar separations. Alternatively, different immobilization schemes can be used to secure proteins within the capillary; these have included capillary electrochromatography with the protein grafted onto a silica support, or immobilization of the protein within a gel structure. Compounds varying in size from small inorganic ions to biopolymers may be bound by proteins. There is the potential for any sort of intermolecular interaction to play a role in the binding process (e.g., hydrophobic interactions, electrostatic interactions, etc.). Very specific high-affinity binding often occurs, but also there is often weaker, non-selective binding. Frequently the interactions of chiral compounds with proteins are stereoselective. Obtaining chiral selectivity has been one of the main applications of protein selectors in CE, and this use will be emphasized here in a discussion structured by type of protein. As well as utilizing the selectivity of proteins to develop separations, the role of CE in investigating ligand-protein interactions will be emphasized.     

Unusual form of recurrent giant cell granuloma of the mandible and lower extremities in a patient with neurofibromatosis type 1

The high resolution of capillary zone electrophoresis/mass spectrometry (CZE/MS) offers a promising technique to characterize biomolecules in pharmaceutical and biotechnology industries. A novel capillary zone electrophoresis/electrospray ionization time-of-flight mass spectrometry (CZE/ESI-TOFMS) interface was designed in this study to successfully integrate ESI-TOFMS, nanospray, and CZE for biomolecular identification. The interface offers a novel way to take advantage of the high resolution separation achieved during CZE and the detection sensitivity of nanospray ESI-MS. The results showed mixtures of peptides were highly resolved within a few minutes (each CZE electropherogram of a peptide is 2-3 seconds). The novel CZE/ESI-TOFMS interface may simultaneously provide sensitivity, data acquisition speed, mass range, and mass resolution while maintaining resolution of the CZE separation.     

Use of affinity capillary electrophoresis for the study of protein and drug interactions

Protein-drug interactions were studied using affinity capillary electrophoresis (ACE). The initial study was performed using a model system, fibronectin-heparin interaction. Two distinct binding constants, 21 and 641 nM, were derived from the Scatchard plots. The results are consistent with reported data obtained using other analytical techniques. The ACE binding assay was applied for studying molecular interactions between kedarcidin chromophore and apoprotein. Conditions with an organic solvent as buffer component were examined to establish a suitable binding assay. It appears that the electrophoretic behavior of the protein shows little distortion in the presence of either dimethyl sulfoxide (up to 10%) or acetonitrile (ACN) (up to 30%). The binding assay was initially conducted in aqueous buffer phase. The saturation concentration of chomophore was found to be around 15 microM. A linear Scatchard plot was derived from binding data with a correlation coefficient of 0.94. The binding constant was determined as Kd = 5.6 microM. The effects of organic solvent content ranging from 0 to 30% ACN on the constant were examined. The binding constants were determined as Kd = 11, 12.5 and 16.2 microM for 5, 10 and 30% ACN, respectively. It appeared that the binding affinity between kedarcidin chromophore and apoprotein is reduced as the organic solvent content in the aqueous phase is increased.     

Capillary electrophoresis, nuclear magnetic resonance and mass spectrometry studies of opposite chiral recognition of chlorpheniramine enantiomers with various cyclodextrins

Markedly different chiral separation abilities were observed for native beta-cyclodextrin (beta-CD), carboxymethyl-beta-CD (CM-beta-CD) and heptakis (2,3,6-tri-O-methyl)-beta-CD (TM-beta-CD) towards the enantiomers of (+/-)-chlorpheniramine ((+/-)-CHL) in capillary electrophoresis (CE). Native beta-CD afforded almost baseline enantioseparation at a concentration of 18 mg/mL, whereas only 1 mg/mL solution of CM-beta-CD was required for adequate enantioseparation. TM-beta-CD allowed the nearly baseline enantioseparation only at a concentration as high as 80 mg/mL. Moreover, the migration order of (+/-)-CHL in the presence of TM-beta-CD was opposite to that with beta-CD and CM-beta-CD. 1H and 13C-NMR spectroscopy and electrospray ionization mass spectrometry (ESI-MS) have been used in order to obtain preliminary information about the stoichiometry and the binding constants in the intermolecular diastereomeric complexes of (+/-)-CHL with these CDs.     

Measurement of whole blood phagocyte chemiluminescence in the Wistar rat

The utility of capillary electrophoresis in the study of DNA-protein binding is demonstrated, using the minimal DNA binding domain of the onco-protein c-Myb (R2R3) and a specific target DNA sequence as a model system. The capillary electrophoresis method is based on simple UV detection at 260 nm with a linear polymer buffer and a coated capillary, and requires no labeling or derivatization of the DNA. A specific protein-DNA complex is observable as a retarded peak, which increases with increasing protein concentration with a corresponding reduction in the free DNA peak. With DNA and protein preparations of known concentrations, a test for sequence-specific binding can be completed within 10 min.     

Capillary electrophoresis/electrospray ionization high mass accuracy time-of-flight mass spectrometry for protein identification using peptide mapping

Capillary electrophoresis/electrospray ionization (CE/ESI) high mass accuracy time-of-flight mass spectrometry was used for the first time to characterize small proteins using peptide mapping. To identify small proteins, the intact proteins were first analyzed to obtain their average molecular weights with errors less than 1 Da. On-line capillary electrophoresis mass spectrometry of the tryptic digests of these small proteins was then performed to obtain the accurate molecular weights of the peptides with accuracies of approximately 10 ppm. Next, this information was used for the identification of the proteins using a protein database. It was found that high mass accuracy is an effective tool in reducing the list of most-likely proteins generated by the database. In addition, on-line collision-induced dissociation of the completely or partially resolved capillary electrophoresis peaks of the protein digests was used to unambiguously identify the sequences of these peptides. Each CE/ESI-MS analysis used only 5 nL of sample containing approximately 120 fmol of each peptide in protein digests. The results indicate that the combination of capillary electrophoresis and high resolution, high mass accuracy time-of-flight mass spectrometry is a viable option for the identification of small proteins using peptide mapping.     

Diffuse biliary tract involvement mimicking primary sclerosing cholangitis in an experimental model of chronic graft-versus-host disease in mice

In a previous study, protein components purified from latex gloves that elicited allergenic reactions were characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), and yielded apparent molecular weights of 14, 22, 30, 34, 46, and 58 kD. These allergenic components were isolated for further characterization by capillary zone electrophoresis and N-terminal amino acid sequence analysis. These components all migrated at approximately 25 and 35 min on capillary zone electrophoresis. Diode array spectral analysis detected indistinguishable characteristics between these two protein peaks. In addition, complex formation of these components with patients' immunoglobulin was demonstrated by capillary zone electrophoresis. Analysis of components separated by SDS-PAGE on a polyvinylidene difluoride membrane showed that the first 13 residues were identical to the sequence of hevein. Based on the criteria of charge-to-mass ratio and N-terminal amino acid sequence, our results suggest that these components of latex proteins are similar in the primary structure.     

Clinical analysis of human urinary proteins using high resolution electrophoretic methods

The application of isoelectric focusing (IEF), sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), two-dimensional electrophoresis (2-DE) and capillary electrophoresis (CE) for high resolution electrophoretic analysis of human urinary proteins is reviewed. In each case, the information is tabulated chronologically with details of sample preparation, electrophoretic system, detection method and clinical application. The text includes an historical perspective of the use of each method for urinalysis and a detailed review of the application of the methods to the investigation of renal disease, renal transplantation, Bence Jones proteinuria (BJP), diabetes mellitus, cadmium toxicity, nephrolithiasis and cancers of the urogenital tract.     

Determination of peptide dissociation constants and Stokes radius at different protonation stages by capillary electrophoresis

Peptide electrophoretic mobility measured by capillary zone electrophoresis can be regarded as deriving from the mean of mobilities of different protonated forms, each one participating according to its charge. Stokes radius and relative percentage. The percentage is a function of the peptide dissociation constant and solution pH. Therefore, mobility modifications due to pH variations can be related to peptide dissociation constant, charge, and Stokes radius throughout general binding equations. Thus, not only can peptide dissociation constants be measured, but information about Stokes radius modifications linked to proton loss can also be obtained with picomoles of peptide.     

Michaelis-Menten analysis of immobilized enzyme by affinity capillary electrophoresis

Michaelis constant of enzymatic reaction was evaluated by affinity capillary electrophoresis using beta-galactosidase as a model enzyme and o- and p-isomers of nitrophenyl-beta-galactoside as substrates. The enzyme was immobilized on the inner surface of a fused-silica capillary by the covalent bonding through a bridging group, and the substrates were introduced into the capillary. The reaction products migrated electrophoretically toward the detection side (anodic side), while the unreacted substrates moved toward the injection side (cathodic side) on a slow electroosmotic flow generated by the weak negative charge of the immobilized enzyme. The initial velocity of the enzymatic reaction was estimated from the peak height of the product, and the Michaelis constant was calculated according to Lineweaver-Burk equation. The results (Km, 2.34 mM for o-isomer and 1.09 mM for p-isomer) were reproducible (RSD < 11.8%, n = 5). Although the estimated Michaelis constants were larger than the reported values measured in homogeneous solution, the ratio of the Michaelis constants of o-/p-isomers was in good agreement with the literature value. The present method required as low as a few microgram amount of enzyme and nanogram amount of substrate which is far smaller than those required in a conventional affinity HPLC.     

Advances in capillary electrophoresis

This review summarizes the advancement in operational modes and selected applications of the title technique over the past five years. Regarding operational modes particular emphasis is put upon increasing selectivity and resolution, hyphenation of capillary electrophoresis with techniques based on other than electromigration principles, the so-called chip technology and new ways of detection. In applications selected examples of chiral separation and separation of biopolymers (proteins, nucleic acids) are emphasized. It is demonstrated that capillary electrophoresis represents a complementary technique to high-performance column chromatography and in a number of cases it offers better separations than standard chromatographic procedures.     

Measurement of protein charge and ion binding using capillary electrophoresis

A new technique is described for the rapid and accurate measurement of electrophoretic mobilities of proteins in different solution environments using capillary electrophoresis. Data were obtained at different pH using surface-modified capillaries to reduce nonspecific protein adsorption and using hydrodynamic mobilization to improve reproducibility and overall accuracy. The net protein charge and extent of anion binding were evaluated from the mobility data obtained in different pH and ionic environments for bovine serum albumin. The results were in good agreement with titration data obtained using ion-selective electrodes and mobility data obtained using free solution electrophoresis. The method requires extremely small amounts of protein (picogram quantities and nanoliter volumes) and is easily automated, making it very suitable for protein characterization and for initial screening of possible separation techniques.     

Capillary electrophoretic analyses of beta-trace protein and other low molecular weight proteins in cerebrospinal fluid from patients with central nervous system diseases

Ordinary capillary-zone electrophoresis (CZE), as well as CZE in a sodium dodecylsulfate-containing polymer solution (SDS-CZE) and capillary isoelectrofocusing (CIEF), was applied to the analysis of low molecular weight proteins in cerebrospinal fluid (CSF) from patients with various neuropsychiatric disorders. Under the CZE conditions employed, a peaks of beta-trace protein (beta TP), which is the most abundant low MW protein in CSF, was clearly detected on the electropherograms of all the samples examined, and the CSF beta TP level could be tentatively determined using allylamine added at a constant concentration as the internal standard. The results revealed that beta TP in CSF was non-specifically increased in organic disease in the central nervous system (CNS), especially in ones giving severe physical damage to the brain tissues. On the other hand, SDS-CZE allowed us to determine simultaneously the CSF minor low MW proteins other than beta TP, such as beta 2-microglobulin, gamma-trace protein, myelin basic protein, etc., while the CIEF electropherograms suggested that beta TP were separated into several fractions with the different PI values. These capillary electrophoresis systems seem to be powerful as aids in the biochemical examinations of beta TP and other low molecular weight proteins in CSF from patients with CNS diseases.     

Precolumn affinity capillary electrophoresis for the identification of clinically relevant proteins in human serum: application to human cardiac troponin I

An approach has been developed to the on-line extraction and identification of clinical disease-state marker proteins in human serum. Fabrication of capillaries with integral packed beds for the online determination of human cardiac troponin I (cTnI), a diagnostic marker for myocardial infarction, at clinically relevant levels (2 nmol/L) in serum is demonstrated. The technique, termed precolumn affinity capillary electrophoresis (PA-CE), utilizes a short (approximately 5 mm) packed bed of porous silica containing covalently immobilized monoclonal anti-cTnI antibodies directly integrated within a separation capillary for the selective retention of cTnI from a complex matrix. Following a rinsing step to eliminate nonspecifically bound serum proteins and other impurities from the column, desorption of the antigen into the separation region of the PA-CE capillary for subsequent measurement of femto-molar amounts of cTnI by CE is effected by the injection of an appropriate elution buffer. Advantages of this approach over previously reported affinity preconcentration techniques, related applications for PA-CE technology, and its potential for use in the development of a certified reference material for cTnI in serum are discussed.