Ultrahigh Rate Performance of Hollow Antimony Nanoparticles Impregnated in Open Carbon Boxes for Sodium‐Ion Battery under Elevated Temperature

Antimony is a competitive and promising anode material for sodium‐ion batteries (SIBs) due to its high theoretical capacity. However, the poor rate capability and fast capacity fading greatly restrict its practical application. To address the above issues, a facile and eco‐friendly sacrificial template method is developed to synthesize hollow Sb nanoparticles impregnated in open carbon boxes (Sb HPs@OCB). The as‐obtained Sb HPs@OCB composite exhibits excellent sodium storage properties even when operated at an elevated temperature of 50 °C, delivering a robust rate capability of 345 mAh g^?1 at 16 A g^?1 and rendering an outstanding reversible capacity of 187 mAh g^?1 at a high rate of 10 A g^?1 after 300 cycles. Such superior electrochemical performance of the Sb HPs@OCB can be attributed to the comprehensive characteristics of improved kinetics derived from hollow Sb nanoparticles impregnated into 2D carbon nanowalls, the existence of robust Sb? O? C bond, and enhanced pseudocapacitive behavior. All those factors enable Sb HPs@OCB great potential and distinct merit for large‐scale energy storage of SIBs.     

Zn‐Ion Hybrid Micro‐Supercapacitors with Ultrahigh Areal Energy Density and Long‐Term Durability

On‐chip micro‐supercapacitors (MSCs), as promising power candidates for microdevices, typically exhibit high power density, large charge/discharge rates, and long cycling lifetimes. However, as for most reported MSCs, the unsatisfactory areal energy density (<10 µWh cm^?2) still hinders their practical applications. Herein, a new‐type Zn‐ion hybrid MSC with ultrahigh areal energy density and long‐term durability is demonstrated. Benefiting from fast ion adsorption/desorption on the capacitor‐type activated‐carbon cathode and reversible Zn stripping/plating on the battery‐type electrodeposited Zn‐nanosheet anode, the fabricated Zn‐ion hybrid MSCs exhibit remarkable areal capacitance of 1297 mF cm^?2 at 0.16 mA cm^?2 (259.4 F g^?1 at a current density of 0.05 A g^?1), landmark areal energy density (115.4 µWh cm^?2 at 0.16 mW cm^?2), and a superb cycling stability without noticeable decay after 10 000 cycles. This work will inspire the fabrication and development of new high‐performance microenergy devices based on novel device design.     

Dual‐Graphene Rechargeable Sodium Battery

Sodium (Na) ion batteries are attracting increasing attention for use in various electrical applications. However, the electrochemical behaviors, particularly the working voltages, of Na ion batteries are substantially lower than those of lithium (Li) ion batteries. Worse, the state‐of‐the‐art Na ion battery cannot meet the demand of miniaturized in modern electronics. Here, we demonstrate that electrochemically exfoliated graphene (EG) nanosheets can reversibly store (PF₆⁻) anions, yielding high charging and discharging voltages of 4.7 and 4.3 V vs. Na⁺/Na, respectively. The dual‐graphene rechargeable Na battery fabricated using EG as both the positive and negative electrodes provided the highest operating voltage among all Na ion full cells reported to date, together with a maximum energy density of 250 Wh kg⁻¹. Notably, the dual‐graphene rechargeable Na microbattery exhibited an areal capacity of 35 μAh cm⁻² with stable cycling behavior. This study offers an efficient option for the development of novel rechargeable microbatteries with ultra‐high operating voltage and high energy density.     

Penne‐Like MoS2/Carbon Nanocomposite as Anode for Sodium‐Ion‐Based Dual‐Ion Battery

The dual‐ion battery (DIB) system has attracted great attention owing to its merits of low cost, high energy, and environmental friendliness. However, the DIBs based on sodium‐ion electrolytes are seldom reported due to the lack of appropriate anode materials for reversible Na⁺ insertion/extraction. Herein, a new sodium‐ion based DIB named as MoS₂/C‐G DIB using penne‐like MoS₂/C nanotube as anode and expanded graphite as cathode is constructed and optimized for the first time. The hierarchical MoS₂/C nanotube provides expanded (002) interlayer spacing of 2H‐MoS₂, which facilitates fast Na⁺ insertion/extraction reaction kinetics, thus contributing to improved DIB performance. The MoS₂/C‐G DIB delivers a reversible capacity of 65 mA h g^?1 at 2 C in the voltage window of 1.0–4.0 V, with good cycling performance for 200 cycles and 85% capacity retention, indicating the feasibility of potential applications for sodium‐ion based DIBs.     

Ultrahigh‐Energy Density Lithium‐Ion Cable Battery Based on the Carbon‐Nanotube Woven Macrofilms

Moore's law predicts the performance of integrated circuit doubles every two years, lasting for more than five decades. However, the improvements of the performance of energy density in batteries lag far behind that. In addition, the poor flexibility, insufficient‐energy density, and complexity of incorporation into wearable electronics remain considerable challenges for current battery technology. Herein, a lithium‐ion cable battery is invented, which is insensitive to deformation due to its use of carbon nanotube (CNT) woven macrofilms as the charge collectors. An ultrahigh‐tap density of 10 mg cm^?2 of the electrodes can be obtained, which leads to an extremely high‐energy density of 215 mWh cm^?3. The value is approximately seven times than that of the highest performance reported previously. In addition, the battery displays very stable rate performance and lower internal resistance than conventional lithium‐ion batteries using metal charge collectors. Moreover, it demonstrates excellent convenience for connecting electronics as a new strategy is applied, in which both electrodes can be integrated into one end by a CNT macrorope. Such an ultrahigh‐energy density lithium‐ion cable battery provides a feasible way to power wearable electronics with commercial viability.     

High‐Energy/Power and Low‐Temperature Cathode for Sodium‐Ion Batteries: In Situ XRD Study and Superior Full‐Cell Performance

Sodium‐ion batteries (SIBs) are still confronted with several major challenges, including low energy and power densities, short‐term cycle life, and poor low‐temperature performance, which severely hinder their practical applications. Here, a high‐voltage cathode composed of Na₃V₂(PO₄)₂O₂F nano‐tetraprisms (NVPF‐NTP) is proposed to enhance the energy density of SIBs. The prepared NVPF‐NTP exhibits two high working plateaux at about 4.01 and 3.60 V versus the Na⁺/Na with a specific capacity of 127.8 mA h g^?1. The energy density of NVPF‐NTP reaches up to 486 W h kg^?1, which is higher than the majority of other cathode materials previously reported for SIBs. Moreover, due to the low strain (≈2.56% volumetric variation) and superior Na transport kinetics in Na intercalation/extraction processes, as demonstrated by in situ X‐ray diffraction, galvanostatic intermittent titration technique, and cyclic voltammetry at varied scan rates, the NVPF‐NTP shows long‐term cycle life, superior low‐temperature performance, and outstanding high‐rate capabilities. The comparison of Ragone plots further discloses that NVPF‐NTP presents the best power performance among the state‐of‐the‐art cathode materials for SIBs. More importantly, when coupled with an Sb‐based anode, the fabricated sodium‐ion full‐cells also exhibit excellent rate and cycling performances, thus providing a preview of their practical application.     

Multilayer Lead‐Free Ceramic Capacitors with Ultrahigh Energy Density and Efficiency

The utilization of antiferroelectric (AFE) materials is thought to be an effective approach to enhance the energy density of dielectric capacitors. However, the high energy dissipation and inferior reliability that are associated with the antiferroelectric–ferroelectric phase transition are the main issues that restrict the applications of antiferroelectric ceramics. Here, simultaneously achieving high energy density and efficiency in a dielectric ceramic is proposed by combining antiferroelectric and relaxor features. Based on this concept, a lead‐free dielectric (Na_0.5Bi_0.5)TiO₃‐x(Sr_0.7Bi_0.2)TiO₃ (NBT‐xSBT) system is investigated and the corresponding multilayer ceramic capacitors (MLCCs) are fabricated. A record‐high energy density of 9.5 J cm^?3, together with a high energy efficiency of 92%, is achieved in NBT‐0.45SBT multilayer ceramic capacitors, which consist of ten dielectric layers with the single‐layer thickness of 20 µm and the internal electrode area of 6.25 mm². Furthermore, the newly developed capacitor exhibits a wide temperature usage range of ‐60 to 120 °C, with an energy‐density variation of less than 10%, and satisfactory cycling reliability, with degradation of less than 8% over 10⁶ cycles. These characteristics demonstrate that the NBT‐0.45SBT multilayer ceramic is a promising candidate for high‐power energy storage applications.     

Toward Tailorable Zn‐Ion Textile Batteries with High Energy Density and Ultrafast Capability: Building High‐Performance Textile Electrode in 3D Hierarchical Branched Design

Rechargeable Zn‐ion batteries are promising candidates for wearable energy storage devices. However, their performance is severely restricted by the low conductivity and inferior mass loading. Herein, a new type of the textile based electrodes with 3D hierarchical branched design is reported. Both Ni nanoparticles and carbon nanotubes are used to build conductive coatings on the textiles. The 3D hierarchical nanostructures, consisting of the vertical‐aligned nanosheets and the fluffy‐like small flakes, grow on the conductive textiles to form the self‐supported electrodes. It ensures fast electron/ion transport and high mass loading, and maintains the structure stability during cycling. Two textile electrodes with the NiCo hydroxide and MnO₂ self‐branched nanostructures are constructed. Their faster kinetics, higher capacity and better rate capability than the solitary nanosheets based counterpart demonstrate the superiority of the hierarchical architecture. Moreover, the solid‐state Zn‐MnO₂ and Zn‐NiCo batteries are fabricated based on the textile electrodes and the polymer electrolytes. The high energy density, superior power density and good long‐term cycling stability confirm their excellent energy storage ability and fast charge/discharge capability. Particularly, the high safety under various conditions enable them promising candidates for wearable electronics.     

Achieving Ultrahigh Energy Density and Long Durability in a Flexible Rechargeable Quasi‐Solid‐State Zn–MnO2 Battery

Advanced flexible batteries with high energy density and long cycle life are an important research target. Herein, the first paradigm of a high‐performance and stable flexible rechargeable quasi‐solid‐state Zn–MnO₂ battery is constructed by engineering MnO₂ electrodes and gel electrolyte. Benefiting from a poly(3,4‐ethylenedioxythiophene) (PEDOT) buffer layer and a Mn²⁺‐based neutral electrolyte, the fabricated Zn–MnO₂@PEDOT battery presents a remarkable capacity of 366.6 mA h g^?1 and good cycling performance (83.7% after 300 cycles) in aqueous electrolyte. More importantly, when using PVA/ZnCl₂/MnSO₄ gel as electrolyte, the as‐fabricated quasi‐solid‐state Zn–MnO₂@PEDOT battery remains highly rechargeable, maintaining more than 77.7% of its initial capacity and nearly 100% Coulombic efficiency after 300 cycles. Moreover, this flexible quasi‐solid‐state Zn–MnO₂ battery achieves an admirable energy density of 504.9 W h kg^?1 (33.95 mW h cm^?3), together with a peak power density of 8.6 kW kg^?1, substantially higher than most recently reported flexible energy‐storage devices. With the merits of impressive energy density and durability, this highly flexible rechargeable Zn–MnO₂ battery opens new opportunities for powering portable and wearable electronics.     

Potassium‐Based Dual Ion Battery with Dual‐Graphite Electrode

A potassium ion battery has potential applications for large scale electric energy storage systems due to the abundance and low cost of potassium resources. Dual graphite batteries, with graphite as both anode and cathode, eliminate the use of transition metal compounds and greatly lower the overall cost. Herein, combining the merits of the potassium ion battery and dual graphite battery, a potassium‐based dual ion battery with dual‐graphite electrode is developed. It delivers a reversible capacity of 62 mA h g^?1 and medium discharge voltage of ≈3.96 V. The intercalation/deintercalation mechanism of K⁺ and PF₆^? into/from graphite is proposed and discussed in detail, with various characterizations to support.     

Few‐Layer Bismuthene with Anisotropic Expansion for High‐Areal‐Capacity Sodium‐Ion Batteries

Bismuth is a promising anode material for state‐of‐the‐art rechargeable batteries due to its high theoretical volumetric capacity and relatively low working potential. However, its charge storage mechanism is unclear, hindering further improvement of the cell performance. Here, using in situ transmission electron microscopy and X‐ray diffraction techniques as well as theoretical analysis, it is found that a large anisotropic volume expansion of 142% occurs along the z‐axis largely due to the alloy reaction during sodiation, significantly reducing the electrochemical performance of bismuth electrodes. To address this problem, ultrathin few‐layer bismuthene with a large aspect ratio is rationally synthesized, and can relieve the expansion strain along the z‐axis. A free‐standing bismuthene/graphene composite electrode with tunable thickness achieves a strikingly stable and high areal sodium storage capacity of 12.1 mAh cm^?2, which greatly exceeds that of most reported electrode materials. The clarification of the charge storage mechanism and the superior areal capacity achieved should facilitate the development of bismuth‐based high‐performance anodes for practical electrochemical energy‐storage applications.     

Efficient Nitrogen‐Doped Carbon for Zinc–Bromine Flow Battery

The zinc–bromine flow battery (ZBFB) is one of the most promising technologies for large‐scale energy storage. Here, nitrogen‐doped carbon is synthesized and investigated as the positive electrode material in ZBFBs. The synthesis includes the carbonization of the glucose precursor and nitrogen doping by etching in ammonia gas. Physicochemical characterizations reveal that the resultant carbon exhibits high electronic conductivity, large specific surface area, and abundant heteroatom‐containing functional groups, which benefit the formation and exposure of the active sites toward the Br₂/Br^? redox couple. As a result, the assembled ZBFB achieves a voltage efficiency of 83.0% and an energy efficiency of 82.5% at a current density of 80 mA cm^?2, which are among the top values in literature. Finally, the ZBFB does not yield any detectable degradation in performance after a 200‐cycle charging/discharging test, revealing its high stability. In summary, this work provides a highly efficient electrode material for the zinc–bromine flow battery.