Fused‐Ring Acceptors with Asymmetric Side Chains for High‐Performance Thick‐Film Organic Solar Cells

A kind of new fused‐ring electron acceptor, IDT‐OB, bearing asymmetric side chains, is synthesized for high‐efficiency thick‐film organic solar cells. The introduction of asymmetric side chains can increase the solubility of acceptor molecules, enable the acceptor molecules to pack closely in a dislocated way, and form favorable phase separation when blended with PBDB‐T. As expected, PBDB‐T:IDT‐OB‐based devices exhibit high and balanced hole and electron mobility and give a high power conversion efficiency (PCE) of 10.12%. More importantly, the IDT‐OB‐based devices are not very sensitive to the film thickness, a PCE of 9.17% can still be obtained even the thickness of active layer is up to 210 nm.     

Recent Progress in Molecular Design of Fused Ring Electron Acceptors for Organic Solar Cells

The quest for sustainable energy sources has led to accelerated growth in research of organic solar cells (OSCs). A solution‐processed bulk‐heterojunction (BHJ) OSC generally contains a donor and expensive fullerene acceptors (FAs). The last 20 years have been devoted by the OSC community to developing donor materials, specifically low bandgap polymers, to complement FAs in BHJs. The current improvement from ≈2.5% in 2013 to 17.3% in 2018 in OSC performance is primarily credited to novel nonfullerene acceptors (NFA), especially fused ring electron acceptors (FREAs). FREAs offer unique advantages over FAs, like broad absorption of solar radiation, and they can be extensively chemically manipulated to tune optoelectronic and morphological properties. Herein, the current status in FREA‐based OSCs is summarized, such as design strategies for both wide and narrow bandgap FREAs for BHJ, all‐small‐molecule OSCs, semi‐transparent OSC, ternary, and tandem solar cells. The photovoltaics parameters for FREAs are summarized and discussed. The focus is on the various FREA structures and their role in optical and morphological tuning. Besides, the advantages and drawbacks of both FAs and NFAs are discussed. Finally, an outlook in the field of FREA‐OSCs for future material design and challenges ahead is provided.     

Naphthodithiophene‐Based Nonfullerene Acceptor for High‐Performance Organic Photovoltaics: Effect of Extended Conjugation

Naphtho[1,2‐b:5,6‐b′]dithiophene is extended to a fused octacyclic building block, which is end capped by strong electron‐withdrawing 2‐(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene)malononitrile to yield a fused‐ring electron acceptor (IOIC2) for organic solar cells (OSCs). Relative to naphthalene‐based IHIC2, naphthodithiophene‐based IOIC2 with a larger π‐conjugation and a stronger electron‐donating core shows a higher lowest unoccupied molecular orbital energy level (IOIC2: ?3.78 eV vs IHIC2: ?3.86 eV), broader absorption with a smaller optical bandgap (IOIC2: 1.55 eV vs IHIC2: 1.66 eV), and a higher electron mobility (IOIC2: 1.0 × 10^?3 cm² V^?1 s^?1 vs IHIC2: 5.0 × 10^?4 cm² V^?1 s^?1). Thus, IOIC2‐based OSCs show higher values in open‐circuit voltage, short‐circuit current density, fill factor, and thereby much higher power conversion efficiency (PCE) values than those of the IHIC2‐based counterpart. In particular, as‐cast OSCs based on FTAZ: IOIC2 yield PCEs of up to 11.2%, higher than that of the control devices based on FTAZ: IHIC2 (7.45%). Furthermore, by using 0.2% 1,8‐diiodooctane as the processing additive, a PCE of 12.3% is achieved from the FTAZ:IOIC2 ‐ based devices, higher than that of the FTAZ:IHIC2 ‐ based devices (7.31%). These results indicate that incorporating extended conjugation into the electron‐donating fused‐ring units in nonfullerene acceptors is a promising strategy for designing high‐performance electron acceptors.     

Design of a New Fused‐Ring Electron Acceptor with Excellent Compatibility to Wide‐Bandgap Polymer Donors for High‐Performance Organic Photovoltaics

Fused‐ring electron acceptors (FREAs) have recently received intensive attention. Besides the continuing development of new FREAs, the demand for FREAs featuring good compatibility to donor materials is becoming more and more urgent, which is highly desirable for screening donor materials and achieving new breakthroughs. In this work, a new FREA is developed, ZITI , featuring an octacyclic dithienocyclopentaindenoindene central core. The core is designed by linking 2,7‐dithienyl substituents and indenoindene with small methylene groups, in which the indeno[1,2‐b]thiophene‐2‐(3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene)malononitrile part provides a large and unoccupied π‐surface. Most notably, ZITI possesses an excellent compatibility with commercially available polymer donors, delivering very high power conversion efficiencies of over 13%.     

Fused Benzothiadiazole: A Building Block for n‐Type Organic Acceptor to Achieve High‐Performance Organic Solar Cells

Narrow bandgap n‐type organic semiconductors (n‐OS) have attracted great attention in recent years as acceptors in organic solar cells (OSCs), due to their easily tuned absorption and electronic energy levels in comparison with fullerene acceptors. Herein, a new n‐OS acceptor, Y5, with an electron‐deficient‐core‐based fused structure is designed and synthesized, which exhibits a strong absorption in the 600–900 nm region with an extinction coefficient of 1.24 × 10⁵ cm^?1, and an electron mobility of 2.11 × 10^?4 cm² V^?1 s^?1. By blending Y5 with three types of common medium‐bandgap polymers (J61, PBDB‐T, and TTFQx‐T1) as donors, all devices exhibit high short‐circuit current densities over 20 mA cm^?2. As a result, the power conversion efficiency of the Y5‐based OSCs with J61, TTFQx‐T1, and PBDB‐T reaches 11.0%, 13.1%, and 14.1%, respectively. This indicates that Y5 is a universal and highly efficient n‐OS acceptor for applications in organic solar cells.     

Enhancing the Performance of Polymer Solar Cells via Core Engineering of NIR‐Absorbing Electron Acceptors

In order to utilize the near‐infrared (NIR) solar photons like silicon‐based solar cells, extensive research efforts have been devoted to the development of organic donor and acceptor materials with strong NIR absorption. However, single‐junction organic solar cells (OSCs) with photoresponse extending into >1000 nm and power conversion efficiency (PCE) >11% have rarely been reported. Herein, three fused‐ring electron acceptors with varying core size are reported. These three molecules exhibit strong absorption from 600 to 1000 nm and high electron mobility (>1 × 10^?3 cm² V^?1 s^?1). It is proposed that core engineering is a promising approach to elevate energy levels, enhance absorption and electron mobility, and finally achieve high device performance. This approach can maximize both short‐circuit current density ( J_SC) and open‐circuit voltage (V_OC) at the same time, differing from the commonly used end group engineering that is generally unable to realize simultaneous enhancement in both V_OC and J_SC. Finally, the single‐junction OSCs based on these acceptors in combination with the widely polymer donor PTB7‐Th yield J_SC as high as 26.00 mA cm^?2 and PCE as high as 12.3%.     

Fused Hexacyclic Nonfullerene Acceptor with Strong Near‐Infrared Absorption for Semitransparent Organic Solar Cells with 9.77% Efficiency

A fused hexacyclic electron acceptor, IHIC, based on strong electron‐donating group dithienocyclopentathieno[3,2‐b ]thiophene flanked by strong electron‐withdrawing group 1,1‐dicyanomethylene‐3‐indanone, is designed, synthesized, and applied in semitransparent organic solar cells (ST‐OSCs). IHIC exhibits strong near‐infrared absorption with extinction coefficients of up to 1.6 × 10⁵m ^?1 cm^?1, a narrow optical bandgap of 1.38 eV, and a high electron mobility of 2.4 × 10^?3 cm² V^?1 s^?1. The ST‐OSCs based on blends of a narrow‐bandgap polymer donor PTB7‐Th and narrow‐bandgap IHIC acceptor exhibit a champion power conversion efficiency of 9.77% with an average visible transmittance of 36% and excellent device stability; this efficiency is much higher than any single‐junction and tandem ST‐OSCs reported in the literature.     

Understanding the High Performance of over 15% Efficiency in Single‐Junction Bulk Heterojunction Organic Solar Cells

The highly efficient single‐junction bulk‐heterojunction (BHJ) PM6:Y6 system can achieve high open‐circuit voltages (V_OC) while maintaining exceptional fill‐factor (FF) and short‐circuit current (J_SC) values. With a low energetic offset, the blend system is found to exhibit radiative and non‐radiative recombination losses that are among the lower reported values in the literature. Recombination and extraction dynamic studies reveal that the device shows moderate non‐geminate recombination coupled with exceptional extraction throughout the relevant operating conditions. Several surface and bulk characterization techniques are employed to understand the phase separation, long‐range ordering, as well as donor:acceptor (D:A) inter‐ and intramolecular interactions at an atomic‐level resolution. This is achieved using photo‐conductive atomic force microscopy, grazing‐incidence wide‐angle X‐ray scattering, and solid‐state ¹⁹F magic‐angle‐spinning NMR spectroscopy. The synergy of multifaceted characterization and device physics is used to uncover key insights, for the first time, on the structure–property relationships of this high‐performing BHJ blend. Detailed information about atomically resolved D:A interactions and packing reveals that the high performance of over 15% efficiency in this blend can be correlated to a beneficial morphology that allows high J_SC and FF to be retained despite the low energetic offset.     

Electron‐Deficient and Quinoid Central Unit Engineering for Unfused Ring‐Based A1–D–A2–D–A1‐Type Acceptor Enables High Performance Nonfullerene Polymer Solar Cells with High Voc and PCE Simultaneously

Here, a pair of A₁–D–A₂–D–A₁ unfused ring core‐based nonfullerene small molecule acceptors (NF‐SMAs), BO2FIDT‐4Cl and BT2FIDT‐4Cl is synthesized, which possess the same terminals (A₁) and indacenodithiophene unit (D), coupling with different fluorinated electron‐deficient central unit (difluorobenzoxadiazole or difluorobenzothiadiazole) (A₂). BT2FIDT‐4Cl exhibits a slightly smaller optical bandgap of 1.56 eV, upshifted highest occupied molecular orbital energy levels, much higher electron mobility, and slightly enhanced molecular packing order in neat thin films than that of BO2FIDT‐4Cl . The polymer solar cells (PSCs) based on BT2FIDT‐4Cl:PM7 yield the best power conversion efficiency (PCE) of 12.5% with a V_oc of 0.97 V, which is higher than that of BO2FIDT‐4Cl ‐based devices (PCE of 10.4%). The results demonstrate that the subtle modification of A₂ unit would result in lower trap‐assisted recombination, more favorable morphology features, and more balanced electron and hole mobility in the PM7:BT2FIDT‐4Cl blend films. It is worth mentioning that the PCE of 12.5% is the highest value in nonfused ring NF‐SMA‐based binary PSCs with high V_oc over 0.90 V. These results suggest that appropriate modulation of the quinoid electron‐deficient central unit is an effective approach to construct highly efficient unfused ring NF‐SMAs to boost PCE and V_oc simultaneously.     

Design of a New Small‐Molecule Electron Acceptor Enables Efficient Polymer Solar Cells with High Fill Factor

Improving the fill factor (FF) is known as a challenging issue in organic solar cells (OSCs). Herein, a strategy of extending the conjugated area of end‐group is proposed for the molecular design of acceptor–donor–acceptor (A–D–A)‐type small molecule acceptor (SMA), and an indaceno[1,2‐b:5,6‐b′]dithiophene‐based SMA, namely IDTN, by end‐capping with the naphthyl fused 2‐(3‐oxocyclopentylidene)malononitrile is synthesized. Benefiting from the π‐conjugation extension by fusing two phenyls, IDTN shows stronger molecular aggregation, more ordered packing structure, thus over one order of magnitude higher electron mobility relative to its counterpart. By utilizing the fluorinated polymer (PBDB‐TF) as the electron donor, the corresponding device exhibits a high efficiency of 12.2% with a record‐high FF of 0.78, which is approaching the theoretical limit of OSCs. Compared with the reference molecule, such a high FF in the IDTN system can be mainly attributed to the more ordered π–π packing of acceptor aggregates, higher domain purity and symmetric carrier transport in the blend. Hence, enlarging the conjugated area of the terminal‐group in these A–D–A‐type SMAs is a promising approach not only for enhancing the electron mobility, but also for improving the blend morphology, and both of them are conducive to the fill‐factor breakthrough.