Rapid and Superior Bacteria Killing of Carbon Quantum Dots/ZnO Decorated Injectable Folic Acid‐Conjugated PDA Hydrogel through Dual‐Light Triggered ROS and Membrane Permeability

One of the most difficult challenges in the biomedical field is bacterial infection, which causes tremendous harm to human health. In this work, an injectable hydrogel is synthesized through rapid assembly of dopamine (DA) and folic acid (FA) cross‐linked by transition metal ions (TMIs, i.e., Zn²⁺), which was named as DFT‐hydrogel. Both the two carboxyl groups in the FA molecule and catechol in polydopamine (PDA) easily chelates Zn²⁺ to form metal–ligand coordination, thereby allowing this injectable hydrogel to match the shapes of wounds. In addition, PDA in the hydrogel coated around carbon quantum dot‐decorated ZnO (C/ZnO) nanoparticles (NPs) to rapidly generate reactive oxygen species (ROS) and heat under illumination with 660 and 808 nm light, endows this hybrid hydrogel with great antibacterial efficacy against Staphylococcus aureus (S. aureus, typical Gram‐positive bacteria) and Escherichia coli (E. coli, typical Gram‐negative bacteria). The antibacterial efficacy of the prepared DFT‐C/ZnO‐hydrogel against S. aureus and E. coli under dual‐light irradiation is 99.9%. Importantly, the hydrogels release zinc ions over 12 days, resulting in a sustained antimicrobial effect and promoted fibroblast growth. Thus, this hybrid hydrogel exhibits great potential for the reconstruction of bacteria‐infected tissues, especially exposed wounds.     

Coculture with Low‐Dose SWCNT Attenuates Bacterial Invasion and Inflammation in Human Enterocyte‐like Caco‐2 Cells

Single walled carbon nanotubes (SWCNTs) have been shown to be highly effective against a wide range of bacteria. Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) infection is a well‐known mediator to prolong hospitalization and initiate chronic inflammation, yet the biological effects of SWCNTs on the pathogen‐infected enterocytes remain unclear. Herein, it is shown that the low‐dose SWCNT treatment attenuates the human enterocyte‐like Caco‐2 cells from the damage of E. coli and S. aureus infection by suppressing NLRP3 inflammasome activation. The relatively low‐dose (1 and 10 μg mL^?1) SWCNT treatments reduce the adhesion and invasion of E. coli and S. aureus to Caco‐2 cells, increase the cell viability and proliferation, reduce the tight junction permeability, and restitute the integrity of cell surface microvilli structure, meanwhile has low cytotoxicity to the host cells. The low‐dose SWCNT treatment further reduces the NLRP3‐mediated IL‐1β secretion in the infected cells. The results identify that a low‐dose SWCNT treatment serves a protective function for the E. coli‐ and S. aureus‐infected Caco‐2 cells by negatively regulating mitochondrial reactive oxygen species‐mediated NLRP3 inflammasome activation.     

Construction of Single‐Iron‐Atom Nanocatalysts for Highly Efficient Catalytic Antibiotics

Bacterial infection caused by pathogenic bacteria has long been an intractable issue that threatens human health. Herein, the fact that nanocatalysts with single iron atoms anchored in nitrogen‐doped amorphous carbon (SAF NCs) can effectively induce peroxidase‐like activities in the presence of H₂O₂, generating abundant hydroxyl radicals for highly effective bacterial elimination (e.g., Escherichia coli and Staphylococcus aureus), is reported. In combination with the intrinsic photothermal performance of the nanocatalysts, noticeable bacterial‐killing effects are extensively investigated. Especially, the antibacterial mechanism of critical cell membrane destruction induced by SAF NCs is unveiled. Based on the bactericidal properties of SAF NCs, in vivo bacterial infections propagated at wounds by E. coli and S. aureus pathogens can be effectively eradicated, resulting in better wound healing. Collectively, the present study highlights the highly efficient in vitro antibacterial and in vivo anti‐infection performances by the single‐iron‐atom‐containing nanocatalysts.     

Development of novel chitin/nanosilver composite scaffolds for wound dressing applications

Antibiotic resistance of microorganisms is one of the major problems faced in the field of wound care and management resulting in complications like infection and delayed wound healing. Currently a lot of research is focused on developing newer antimicrobials to treat wounds infected with antibiotic resistant microorganisms. Silver has been used as an antimicrobial agent for a long time in the form of metallic silver and silver sulfadiazine ointments. Recently silver nanoparticles have come up as a potent antimicrobial agent and are finding diverse medical applications ranging from silver based dressings to silver coated medical devices. Chitin is a natural biopolymer with properties like biocompatibility and biodegradability. It is widely used as a scaffold for tissue engineering applications. In this work, we developed and characterized novel chitin/nanosilver composite scaffolds for wound healing applications. The antibacterial, blood clotting and cytotoxicity of the prepared composite scaffolds were also studied. These chitin/nanosilver composite scaffolds were found to be bactericidal against S. aureus and E. coli and good blood clotting ability. These results suggested that these chitin/nanosilver composite scaffolds could be used for wound healing applications.     

Composites of Bacterial Cellulose and Small Molecule‐Decorated Gold Nanoparticles for Treating Gram‐Negative Bacteria‐Infected Wounds

Bacterial infections, especially multidrug‐resistant bacterial infections, are an increasingly serious problem in the field of wound healing. Herein, bacterial cellulose (BC) decorated by 4,6‐diamino‐2‐pyrimidinethiol (DAPT)‐modified gold nanoparticles (Au‐DAPT NPs) is presented as a dressing (BC‐Au‐DAPT nanocomposites) for treating bacterially infected wounds. BC‐Au‐DAPT nanocomposites have better efficacy (measured in terms of reduced minimum inhibition concentration) than most of the antibiotics (cefazolin/sulfamethoxazole) against Gram‐negative bacteria, while maintaining excellent physicochemical properties including water uptake capability, mechanical strain, and biocompatibility. On Escherichia coli‐ or Pseudomonas aeruginosa‐infected full‐thickness skin wounds on rats, the BC‐Au‐DAPT nanocomposites inhibit bacterial growth and promote wound repair. Thus, the BC‐Au‐DAPT nanocomposite system is a promising platform for treating superbug‐infected wounds.     

Synthesis and characterization of quaternized carboxymethyl chitosan/poly(amidoamine) dendrimer core–shell nanoparticles

With the aim to develop a novel water-soluble modified chitosan nanoparticle with tuned size and improved antibacterial activity, quaternized carboxymethyl chitosan/poly(amidoamine) dendrimers (CM-HTCC/PAMAM) were synthesized. Firstly low-generation amino-terminated poly(amidoamine) (PAMAM) dendrimers were prepared via repetitive reactions between Michael addition and amidation, which were then employed for modifying quaternized carboxymethyl chitosan (CM-HTCC). Prior to the reaction of CM-HTCC with PAMAM, carboxylic groups in CM-HTCC were activated with EDC/NHS in order to enhance the reaction efficiency. FT-IR, ¹H NMR, elemental analysis and XRD were performed to characterize CM-HTCC/PAMAM dendrimers. Turbidity measurements showed that CM-HTCC/PAMAM dendrimers had good water-solubility. TEM images indicated that CM-HTCC/PAMAM dendrimers existed as smooth and spherical nanoparticles in aqueous solution. The results of antibacterial activity explored that CM-HTCC/PAMAM dendrimer nanoparticles displayed higher antibacterial activity against Gram-negative bacteria Escherichia coli (E. coli), whereas they showed much less efficiency against Gram-positive bacteria Staphylococcus aureus (S. aureus) compared to quaternized chitosan (HTCC).     

Electrophoretic Deposited Stable Chitosan@MoS2 Coating with Rapid In Situ Bacteria‐Killing Ability under Dual‐Light Irradiation

Developing in situ disinfection methods in vivo to avoid drug‐resistant bacteria and tissue toxicity is an urgent need. Here, the photodynamic and photothermal properties of the chitosan‐assisted MoS₂ (CS@MoS₂) hybrid coating are simultaneously inspired to endow metallic Ti implants with excellent surface self‐antibacterial capabilities. This coating, irradiated by only 660 nm visible light (VL) for 10 min, exhibits an antibacterial efficacy of 91.58% and 92.52% against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), respectively. The corresponding value is 64.67% and 57.44%, respectively, after irradiation by a single 808 nm near infrared light for the same amount of time. However, the combined irradiation using both lights can significantly enhance the efficiency up to 99.84% and 99.65% against E. coli and S. aureus, respectively, which can be ascribed to the synergistic effects of photodynamic and photothermal actions. The former produces single oxygen species under 660 nm VL while the latter induces a rise in temperature of implants, which can inhibit the growth of both E. coli and S. aureus. The introduction of CS can also promote the biocompatibility of implants, which provides a facile, rapid, and safe in situ bacteria‐killing method in vivo without needing a second surgery.     

Evaluation of ‘green’ synthesis and biological activity of gold nanoparticles using Tragopogon dubius leaf extract as an antibacterial agent

Currently, the use of ‘green’ synthesised nanoparticles with environmentally friendly properties is considered a novel therapeutic approach in medicine. Here, the authors evaluated gold nanoparticles (AuNPs) conjugated with Tragopogon dubius leaf extract and their antibacterial activity in vitro and in vivo. Colour changes from yellow to dark brown and a peak at 560 nm on ultraviolet–visible spectroscopy confirmed the formation of nanoparticles. Additionally, transmission electron microscopy, X‐ray diffraction, and Fourier transform infrared spectroscopy analyses were performed to determine particle sizes and functional groups involved in gold reduction. Moreover, using standard micro‐dilution and disc‐diffusion assays against Klebsiella pneumoniae, Bacillus cereus, Escherichia coli, and Staphylococcus aureus, the antimicrobial properties of synthesised AuNPs were investigated. To confirm antibacterial activity, synthesised AuNPs were applied in a rat model on burn wounds infected with S. aureus, and the nanoparticles were as effective as tetracycline in bacterial reduction and wound healing. In conclusion, the synthesis of AuNPs with aqueous T. dubius extract was rapid, simple, and inexpensive, and the synthesised nanoparticles had significant antibacterial activity in vitro and in vivo.Inspec keywords: transmission electron microscopy, wounds, nanoparticles, ultraviolet spectra, reduction (chemical), particle size, nanofabrication, gold, X‐ray diffraction, antibacterial activity, microorganisms, visible spectra, nanomedicine, biomedical materials, Fourier transform infrared spectraOther keywords: biological activity, gold nanoparticles, antibacterial agent, therapeutic approach, colour changes, ultraviolet–visible spectroscopy, transmission electron microscopy, gold reduction, antimicrobial properties, Fourier transform infrared spectroscopy analyses, disc‐diffusion assay, green synthesis, Tragopogon dubius leaf, in vitro antibacterial activity, in vivo antibacterial activity, X‐ray diffraction, particle sizes, functional groups, standard microdilution assay, burn wounds, S. aureus, tetracycline, bacterial reduction, wound healing, wavelength 560.0 nm     

A Hierarchical 3D Nanostructured Microfluidic Device for Sensitive Detection of Pathogenic Bacteria

Efficient capture and rapid detection of pathogenic bacteria from body fluids lead to early diagnostics of bacterial infections and significantly enhance the survival rate. We propose a universal nano/microfluidic device integrated with a 3D nanostructured detection platform for sensitive and quantifiable detection of pathogenic bacteria. Surface characterization of the nanostructured detection platform confirms a uniform distribution of hierarchical 3D nano‐/microisland (NMI) structures with spatial orientation and nanorough protrusions. The hierarchical 3D NMI is the unique characteristic of the integrated device, which enables enhanced capture and quantifiable detection of bacteria via both a probe‐free and immunoaffinity detection method. As a proof of principle, we demonstrate probe‐free capture of pathogenic Escherichia coli (E. coli) and immunocapture of methicillin‐resistant‐Staphylococcus aureus (MRSA). Our device demonstrates a linear range between 50 and 10⁴ CFU mL^?1, with average efficiency of 93% and 85% for probe‐free detection of E. coli and immunoaffinity detection of MRSA, respectively. It is successfully demonstrated that the spatial orientation of 3D NMIs contributes in quantifiable detection of fluorescently labeled bacteria, while the nanorough protrusions contribute in probe‐free capture of bacteria. The ease of fabrication, integration, and implementation can inspire future point‐of‐care devices based on nanomaterial interfaces for sensitive and high‐throughput optical detection.     

Therapeutic Window of Ligand‐Free Silver Nanoparticles in Agar‐Embedded and Colloidal State: In Vitro Bactericidal Effects and Cytotoxicity

The inhibition of bacterial growth through effective non‐toxic antimicrobial substances is of great importance for the prevention and therapy of implant infections in various medical disciplines. For the evaluation of a therapeutic window of silver nanoparticles (AgNPs), their bactericidal properties were tested in agar composites and colloids on four medical relevant bacteria. Therefore, we produced AgNPs using high‐power nanosecond laser ablation in water showing a log‐normal particle diameter distribution centered at 17 nm. Bacteria were incubated with AgNP concentrations ranging from 5 to 70 µg · mL^?1 and the growth rate was recorded. Additionally, cytotoxic effects of AgNPs on human gingival fibroblasts were examined. The experiments demonstrated that laser‐synthesized AgNPs resulted in a significant bacterial growth inhibition of more than 80% at the indicated concentrations in a solid agar model (Pseudomonas aeruginosa 10 µg · mL^?1, Streptococcus salivarius 10 µg · mL^?1, Escherichia coli 20 µg · mL^?1, Staphylococcus aureus 70 µg · mL^?1). In a planktonic bacteria model, the growth of the tested bacteria was significantly delayed by the addition of AgNPs at a concentration of 35 µg · mL^?1. The cytotoxic assays showed limited adverse effects on human fibroblasts at concentrations of less than 20 µg · mL^?1. The present study illustrates the strong antibacterial effects of ligand‐free, laser‐generated AgNPs that exhibit moderate cytotoxic effects, resulting in a therapeutically applicable concentration of AgNPs for medical purposes between 10 and 20 µg · mL^?1.     

Swarming Magnetic Microrobots for Pathogen Isolation from Milk

Bovine mastitis produced by Staphylococcus aureus (S. aureus) causes major problems in milk production due to the staphylococcal enterotoxins produced by this bacterium. These enterotoxins are stable and cannot be eradicated easily by common hygienic procedures once they are formed in dairy products. Here, magnetic microrobots (MagRobots) are developed based on paramagnetic hybrid microstructures loaded with IgG from rabbit serum that can bind and isolate S. aureus from milk in a concentration of 3.42 10⁴ CFU g⁻¹ (allowable minimum level established by the United States Food and Drug Administration, FDA). Protein A, which is present on the cell wall of S. aureus, selectively binds IgG from rabbit serum and loads the bacteria onto the surface of the MagRobots. The selective isolation of S. aureus is confirmed using a mixed suspension of S. aureus and Escherichia coli (E. coli). Moreover, this fuel-free system based on magnetic robots does not affect the natural milk microbiota or add any toxic compound resulting from fuel catalysis. This system can be used to isolate and transport efficiently S. aureus and discriminate it from nontarget bacteria for subsequent identification. Finally, this system can be scaled up for industrial use in food production.     

Tyrosinase‐catalysed grafting of food‐grade gallates to chitosan: surface properties of novel functional coatings

Plasma‐activated biaxially oriented polypropylene (BOPP) films and paper substrate have been coated with functional chitosan solutions. Plasma treatment increased the amount of surface peroxide groups and carboxyl groups on the BOPP films. As a result of plasma activation, the surface energy increased from 30 to 50 dynes/cm. The enzyme tyrosinase catalysed the grafting of octyl gallate and dodecyl gallate to amino groups of chitosan polysaccharide. Resulting coatings exhibited strong antimicrobial activity against Gram‐positive Staphylococcus aureus and Gram‐negative Listeria innocua. After 24 h of incubation, a total reduction in both bacteria cell numbers varied between >4.9 and 1.4 logarithmic units. Grafted dodecyl gallate and octyl gallate at pH 6 were found to have the lowest reduction values of <3 logarithmic units for S. aureus, while 1.4 logarithmic reduction value was obtained for grafted dodecyl gallate at pH 6 against L. innocua. Chitosan coatings were also effective barrier layers against oxygen transmission although the transmission rates clearly increased in high‐humidity conditions. In dry conditions, however, the transmission rate of 2 cm³/(m² · 24 h) was obtained with chitosan‐coated BOPP. Coatings did not have any effects on water vapour transmission. Both gallates were successfully grafted at pH 6. As increased flocculation and colour formation indicated, the tyrosinase‐catalysed grafting was more powerful with octyl gallate. Dodecyl gallate containing chitosan coatings was more hydrophobic as compared to octyl gallate. Total migration of substances into 95% ethanol was ≥5 mg/dm², thus materials may be exploitable in packaging purposes in direct contact with certain foodstuffs. Copyright © 2008 John Wiley & Sons, Ltd.     

Eradication of Multi‐Drug Resistant Bacteria by a Novel Zn‐doped CuO Nanocomposite

Zinc‐doped copper oxide nanoparticles are synthesized and simultaneously deposited on cotton fabric using ultrasound irradiation. The optimization of the processing conditions, the specific reagent ratio, and the precursor concentration results in the formation of uniform nanoparticles with an average size of ≈30 nm. The antibacterial activity of the Zn‐doped CuO Cu_0.88Zn_0.12O in a colloidal suspension or deposited on the fabric is tested against Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive) bacteria. A substantial enhancement of 10 000 times in the antimicrobial activity of the Zn–CuO nanocomposite compared to the pure CuO and ZnO nanoparticles (NPs) is observed after 10 min exposure to the bacteria. Similar activities are observed against multidrug‐resistant bacteria (MDR), (i.e., Methicillin‐resistant S. aureus and MDR E. coli) further emphasizing the efficacy of this composite. Finally, the mechanism for this enhanced antibacterial activity is presented.     

In Vivo Dynamic Monitoring of Bacterial Infection by NIR‐II Fluorescence Imaging

Time window of antibiotic administration is a critical but long‐neglected point in the treatment of bacterial infection, as unnecessary prolonged antibiotics are increasingly causing catastrophic drug‐resistance. Here, a second near‐infrared (NIR‐II) fluorescence imaging strategy based on lead sulfide quantum dots (PbS QDs) is presented to dynamically monitor bacterial infection in vivo in a real‐time manner. The prepared PbS QDs not only provide a low detection limit (10⁴ CFU mL^?1) of four typical bacteria strains in vitro but also show a particularly high labeling efficiency with Escherichia coli (E. coli). The NIR‐II in vivo imaging results reveal that the number of invading bacteria first decreases after post‐injection, then increases from 1 d to 1 week and drop again over time in infected mouse models. Meanwhile, there is a simultaneous variation of dendritic cells, neutrophils, macrophages, and CD8+ T lymphocytes against bacterial infection at the same time points. Notably, the infected mouse self‐heals eventually without antibiotic treatment, as a robust immune system can successfully prevent further health deterioration. The NIR‐II imaging approach enables real‐time monitoring of bacterial infection in vivo, thus facilitating spatiotemporal deciphering of time window for antibiotic treatment.     

Synergistic Chemotherapy and Photodynamic Therapy of Endophthalmitis Mediated by Zeolitic Imidazolate Framework‐Based Drug Delivery Systems

Endophthalmitis, derived from the infections of pathogens, is a common complication during the use of ophthalmology‐related biomaterials and after ophthalmic surgery. Herein, aiming at efficient photodynamic therapy (PDT) of bacterial infections and biofilm eradication of endophthalmitis, a pH‐responsive zeolitic imidazolate framework‐8‐polyacrylic acid (ZIF‐8‐PAA) material is constructed for bacterial infection–targeted delivery of ammonium methylbenzene blue (MB), a broad‐spectrum photosensitizer antibacterial agent. Polyacrylic acid (PAA) is incorporated into the system to achieve higher pH responsiveness and better drug loading capacity. MB‐loaded ZIF‐8‐PAA nanoparticles are modified with AgNO₃/dopamine for in situ reduction of AgNO₃ to silver nanoparticles (AgNPs), followed by a secondary modification with vancomycin/NH₂‐polyethylene glycol (Van/NH₂‐PEG), leading to the formation of a composite nanomaterial, ZIF‐8‐PAA‐MB@AgNPs@Van‐PEG. Dynamic light scattering, transmission electron microscopy, and UV–vis spectral analysis are used to explore the nanoparticles synthesis, drug loading and release, and related material properties. In terms of biological performance, in vitro antibacterial studies against three kinds of bacteria, i.e., Escherichia coli, Staphylococcus aureus, and methicillin‐resistant S. aureus, suggest an obvious superiority of PDT/AgNPs to any single strategy. Both in vitro retinal pigment epithelium cellular biocompatibility experiments and in vivo mice endophthalmitis models verify the biocompatibility and antibacterial function of the composite nanomaterials.     

Chitosan‐based nanofibers as bioactive meat packaging materials

Shelf life and safety of minimally processed food are crucial for both consumers and the food industry. This study investigates the in vitro and in situ efficiency of electrospun chitosan‐based nanofibers (CNFs) as inner part of a multilayer packaging in maintaining the quality of unprocessed red meat. Activated CNF‐based packaging (CNFP) were obtained by direct electrospinning of chitosan/poly(ethylene oxide) solutions on top of a conventional multilayer food packaging. The electrospinning solutions were firstly characterized at the molecular level, mainly in terms of zeta potential and viscoelastic properties, and the evolution of the conformational structure was correlated to the nanofiber formation process. The oxygen and water vapor barrier properties of CNF‐based (CNFP) meat packaging were also investigated. The in vitro antibacterial activity of CNFs was determined against Escherichia coli, Salmonella enterica serovar Typhimurium, Staphylococcus aureus, and Listeria innocua, bacteria commonly incriminated in the alteration of food products. The efficiency of the CNFP materials against meat spoilage by E. coli was also assessed. Our results indicate that the electrospinning of CS is a multifactorial process and fiber formation requires the choice of a good solvent, high electrical conductivity, moderate surface tension, optimum viscoelastic properties, and sufficient chain flexibility and entanglement. The results also indicate that all the tested bacterial strains were significantly sensitive to the action of CNFs. The in situ bioactivity against E. coli showed the potential of CNFP as bioactive nanomaterial barriers to meat contamination by extending the shelf life of fresh meat up to 1 week.     

Nanowire‐Seeded Growth of Single‐Crystalline (010) β‐Ga2O3 Nanosheets with High Field‐Effect Electron Mobility and On/Off Current Ratio

2D β‐Ga₂O₃ nanosheets, as fundamental materials, have great potential in next generations of ultraviolet transparent electrodes, high‐temperature gas sensors, solar‐blind photodetectors, and power devices, while their synthesis and growth with high crystalline quality and well‐controlled orientation have not been reported yet. The present study demonstrates how to grow single‐crystalline ultrathin quasi‐hexagonal β‐Ga₂O₃ nanosheets with nanowire seeds and proposes a hierarchy‐oriented growth mechanism. The hierarchy‐oriented growth is initiated by epitaxial growth of a single‐crystalline $(\stackrel{?}{2}01)$β‐Ga₂O₃ nanowire on a GaN nanocrystal and followed by homoepitaxial growth of quasi‐hexagonal (010) β‐Ga₂O₃ nanosheets. The undoped 2D (010) β‐Ga₂O₃ nanosheet field effect transistor has a field‐effect electron mobility of 38 cm² V^?1 s^?1 and an on/off current ratio of 10⁷ with an average subthreshold swing of 150 mV dec^?1. The from‐nanowires‐to‐nanosheets technique paves a novel way to fabricate nanosheets, which has great impact on the field of nanomaterial synthesis and growth and the area of nanoelectronics as well.     

Multifunctional Antimicrobial Biometallohydrogels Based on Amino Acid Coordinated Self‐Assembly

There is a real need for new antibiotics against self‐evolving bacteria. One option is to use biofriendly broad‐spectrum and mechanically tunable antimicrobial hydrogels that can combat multidrug‐resistant microbes. Whilst appealing, there are currently limited options. Herein, broad‐spectrum antimicrobial biometallohydrogels based on the self‐assembly and local mineralization of Ag⁺‐coordinated Fmoc‐amino acids are reported. Such biometallohydrogels have the advantages of localized delivery and sustained release, reduced drug dosage and toxicity yet improved bioavailability, prolonged drug effect, and tunable mechanical strength. Furthermore, they can directly interact with the cell walls and membrane, resulting in the detachment of the plasma membrane and leakage of the cytoplasm. This leads to cell death, triggering a significant antibacterial effect against both Gram‐negative (Escherichia coli) and Gram‐positive (Staphylococcus aureus) bacteria in cells and mice. This study paves the way for developing a multifunctional integration platform based on simple biomolecules coordinated self‐assembly toward a broad range of biomedical applications.     

A Magneto-Heated Silk Fibroin Scaffold for Anti-Biofouling Solar Steam Generation

Macroscopic 3D porous materials are ideal solar evaporators for water purification. However, the limited sunlight intensity and penetrating depth during solar-driven evaporation cannot prevent the biofouling formation by photothermal effect, thus leading to the deterioration of evaporation rate. Herein, a magnetic heating strategy is reported for anti-biofouling solar steam generation based on a magnetic silk fibroin (SF) scaffold with bi-heating property. Under one sun, the solar-heated top surface of magnetic SF scaffolds accelerates water evaporation at 2.03 kg m⁻² h⁻¹, while the unheated inner channels suffer from the formation of biofilm. When exposed to alternating magnetic field (AMF), the magnetic SF scaffold can be integrally heated, leading to an efficient inner temperature to prevent biofouling in channels for water transportation. Accordingly, magneto-heated scaffolds show steady water evaporation rates after exposure to S. aureus and E. coli, which maintained 93.6–94.6% of original performance. In contrast, the evaporation rates of the scaffolds without AMF treatment are reduced to 1.31 (S. aureus) and 1.32 (E. coli) kg m⁻² h⁻¹, decreased by 35.5% and 35.0%, respectively. In addition, the magneto-heated scaffold inhibits biofouling formation in natural lake water, maintaining 99.5% original performance.