Rational Design of FeNi Bimetal Modified Covalent Organic Frameworks for Photoconversion of Anthropogenic CO2 into Widely Tunable Syngas

Direct photoconversion of low‐concentration CO₂ into a widely tunable syngas (i.e., CO/H₂ mixture) provides a feasible outlet for the high value‐added utilization of anthropogenic CO₂. However, in the low‐concentration CO₂ photoreduction system, it remains a huge challenge to screen appropriate catalysts for efficient CO and H₂ production, respectively, and provide a facile parameter to tune the CO/H₂ ratio in a wide range. Herein, by engineering the metal sites on the covalent organic frameworks matrix, low‐concentration CO₂ can be efficiently photoconverted into tunable syngas, whose CO/H₂ ratio (1:19–9:1) is obviously wider than reported systems. Experiments and density functional theory calculations indicate that Fe sites serve as the H₂ evolution sites due to the much stronger binding affinity to H₂O, while Ni sites act as the CO production sites for the higher affinity to CO₂. Notably, the widely tunable syngas can also be produced over other Fe/Ni‐based bimetal catalysts, regardless of their structures and supporting materials, confirming the significant role of the metal sites in regulating the selectivity of CO₂ photoreduction and providing a modular design strategy for syngas production.     

Controlling Monomer Feeding Rate to Achieve Highly Crystalline Covalent Triazine Frameworks

The synthesis of highly crystalline covalent triazine frameworks (CTFs) with ultrastrong covalent bonds (aromatic C?N) from the triazine linkage presents a great challenge to synthetic chemists. Herein, the synthesis of highly crystalline CTFs via directly controlling the monomer feeding rate is reported. By tuning the feeding rate of monomers, the crystallization process can be readily governed in a controlled manner in an open system. The sample of CTF‐HUST‐HC1 with abundant exposed {001} crystal facets has the better crystallinity and thus is selected to study the effect of high crystallinity on photoelectric properties. Owing to the better separation of photogenerated electron–hole pairs and charge transfer, the obtained highly ordered CTF‐HUST‐HC1 has superior performance in the photocatalytic removal of nitric oxide (NO) than its lesser crystalline counterparts and g‐C₃N₄.     

Single Site Coordination Enabled Construction of Metal-Diketimine-Linked Covalent Organic Frameworks for Boosted Electrooxidation of Biomass Derivative

Aromatic aldehydes are widely used for the construction of covalent organic frameworks (COFs). However, due to the high flexibility, high steric hindrance, and low reactivity, it remains challenging to synthesize COFs using ketones as building units, especially the highly flexible aliphatic ones. Here, the single nickel site coordination strategy is reported to lock the configurations of the highly flexible diketimine to transform discrete oligomers or amorphous polymers into highly crystalline nickel-diketimine-linked COFs (named as Ni-DKI-COFs). The strategy has been successfully extended to the synthesis of a series of Ni-DKI-COFs by the condensation of three flexible diketones with two tridentate amines. Thanks to the ABC stacking model with high amount and easily accessible single nickel (II) sites on their 1D channels, Ni-DKI-COFs are exploited as well-defined electrocatalyst platforms for efficiently electro-upgrading biomass-derived 5-Hydroxymethylfurfural (HMF) into value-added 2,5-furandicarboxylic acid (FDCA) with a 99.9% yield and a 99.5% faradaic efficiency as well as a high turnover frequency of 0.31 s⁻¹.     

Metallaphotocatalytic Amination of Aryl Chlorides Enabled by Highly Crystalline Acetylene-Based Hydrazone-Linked Covalent Organic Frameworks

Amination of aryl chlorides by metallaphotocatalysis is highly desired but remains practically challenging. Meanwhile, relying on soluble noble-metal photocatalysts suffers from resource scarcity and structural instability which limit their practical application. Here in, a highly crystalline acetylene-based hydrazone-linked covalent organic framewok-1 (AC-COF-1) is reported that enables metallaphotocatalytic amination of aryl chlorides. The non-planar effect of hydrazone linkage and weak interlayer attraction of acetylene bond are minimized by intralayer hydrogen-bonding. As a result, the COF shows not only improved crystallinity and porosity, but also enhanced optical and electronic properties compared to a COF analog without hydrogen-bonding. Notably, dual AC-COF-1 /Ni system affords C N coupling products from broad aryl chloride substrates in excellent yields (up to 99%) and good functional tolerance. Furthermore, AC-COF-1 is recoverable and reusable for seven times photocatalysis cycles. This report demonstrates simple approach to tune the structure-activity relationship in COFs at molecular level.     

From Supramolecular Organic Cages to Porous Covalent Organic Frameworks for Enhancing Iodine Adsorption Capability by Fully Exposed Nitrogen-Rich Sites

In order to overcome the limitations of supramolecular organic cages for their incomplete accessibility of active sites in the solid state and uneasy recyclability in liquid solution, herein a nitrogen-rich organic cage is rationally linked into framework systems and four isoreticular covalent organic frameworks (COFs), that is, Cage-TFB-COF, Cage-NTBA-COF, Cage-TFPB-COF, and Cage-TFPT-COF, are successfully synthesized. Structure determination reveals that they are all high-quality crystalline materials derived from the eclipsed packing of related isoreticular two-dimensional frameworks. Since the nitrogen-rich sites usually have a high affinity toward iodine species, iodine adsorption investigations are carried out and the results show that all of them display an enhancement in iodine adsorption capacities. Especially, Cage-NTBA-COF exhibits an iodine adsorption capacity of 304 wt%, 14-fold higher than the solid sample packed from the cage itself. The strong interactions between the nitrogen-rich sites and the adsorbed iodine species are revealed by spectral analyses. This work demonstrates that, utilizing the reticular chemistry strategy to extend the close-packed supramolecular organic cages into crystalline porous framework solids, their inherent properties can be greatly exploited for targeted applications.     

Entropy-Driven Ultrafast Ion Conduction Via Confining Organic Plastic Crystals in Ordered Nanochannels of Covalent Organic Frameworks

Low conductivity over a wide temperature region due to ultra-slow ion migration dynamics is a key issue in the field of solid-state electrolytes (SSE), which needs to be solved and improved. Covalent organic frameworks (COFs), a rapidly growing class of porous crystalline materials, emerge as a new research hotspot in the field of SSEs. This is due to their homogeneously dispersed sites and well-defined pathways for ion diffusion, demonstrating great advantages over conventional non-porous solids. Herein, a composite solid electrolyte by confining organic ionic plastic crystal (OIPC) in the 1D ordered nanochannels of COFs as the host matrix for solid-state lithium-ion conduction, is reported. Due to the loss of coupling between PBu₄⁺ cations and TFSI⁻ anions, the cation–anion interaction is weakened; and thus, the lithium-ion transportation is facilitated. As a result, the COF-confining OIPC SSEs show ultra-high lithium-ion conductivity of 0.048 S cm⁻¹ at 30 °C and 0.021 S cm⁻¹ at the extremely low temperature of −30 °C. The dynamic origin of this fast ion conduction is characterized by differential scanning calorimetry (DSC), X-ray photoelectron spectroscopy (XPS), and variable temperature solid-state nuclear magnetic resonance (NMR) spectroscopy.     

Exceptional Iodine Capture in 2D Covalent Organic Frameworks

Progress in chemistry over the past four decades has generated a variety of porous materials for removing iodine—a radioactive emission accompanying nuclear fission. However, most studies are still based on the notion that entangled pores together with specific binding sites are essential for iodine capture. Here, an unraveled physical picture of iodine capture that overturns the preconception by exploring 1D channeled porous materials is disclosed. 2D covalent organic frameworks are constructed in a way so that they are free of interpenetration and binding sites but consist of 1D open channels. As verified with different channels shaping from hexagonal to tetragonal and trigonal and ranging from micropores to mesopores, all the 1D channels enable a full access to iodine, generalizing a new paradigm that the pore volume determines the uptake capacity. These results are of fundamental importance to understanding iodine uptake and designing materials to treat coagulative toxic vapors.     

Metal‐Organic Frameworks for CO2 Chemical Transformations

Carbon dioxide (CO₂), as the primary greenhouse gas in the atmosphere, triggers a series of environmental and energy related problems in the world. Therefore, there is an urgent need to develop multiple methods to capture and convert CO₂ into useful chemical products, which can significantly improve the environment and promote sustainable development. Over the past several decades, metal‐organic frameworks (MOFs) have shown outstanding heterogeneous catalytic activity due in part to their high internal surface area and chemical functionalities. These properties and the ability to synthesize MOF platforms allow experiments to test structure‐function relationships for transforming CO₂ into useful chemicals. Herein, recent developments are highlighted for MOFs participating as catalysts for the chemical fixation and photochemical reduction of CO₂. Finally, opportunities and challenges facing MOF catalysts are discussed in this ongoing research area.     

Electroactive Covalent Organic Frameworks: Design,Synthesis, and Applications

Covalent organic frameworks (COFs) are an emerging class of crystalline porous polymers with tailorable compositions, porosities, functionalities, and intrinsic chemical stability. The incorporation of electroactive moieties in the structure transforms COFs into electroactive materials with great potential for energy-related applications. Herein, the recent advances in the design and use of electroactive COFs as capacitors, batteries, conductors, fuel cells, water-splitting, and electrocatalysis are addressed. Their remarkable performance is discussed and compared with other porous materials; hence, perspectives in the development of electroactive COFs are presented.     

Aminal-Linked Covalent Organic Frameworks with hxl-a and Quasi-hcb Topologies for Efficient C2H6/C2H4 Separation

In reticular chemistry, topology is a powerful concept for defining the structures of covalent organic frameworks (COFs). However, due to the lack of diversity in the symmetry and reaction stoichiometry of the monomers, only 5% of the two-dimensional topologies have been reported to be COFs. To overcome the limitations of COF connectivity and pursue novel topologies in COF structures, two aminal-linked COFs, KUF-2 and KUF-3,  are prepared, with dumbbell-shaped secondary building units. Linear dialdehydes and piperazine are condensed at a ratio of 1:2 to construct an aminal linkage, leading to unreported hxl-a ( KUF-2 ) and quasi- hcb ( KUF-3 ) structures. Notably, KUF-3 displays top-tier C₂H₆/C₂H₄ selectivity and C₂H₆ uptake at 298 K, outperforming most porous organic materials. The intrinsic aromatic ring-rich and Lewis basic pore environments, and appropriate pore widths enable the selective adsorption of C₂H₆, as confirmed by Grand Canonical Monte Carlo simulations. Dynamic breakthrough curves revealed that C₂H₆ can be selectively separated from a gas mixture of C₂H₆ and C₂H₄. This study suggests that topology-based design of aminal-COFs is an effective strategy for expanding the field of reticular chemistry and provides the facile integration of strong Lewis basic sites for selective C₂H₆/C₂H₄ separation.     

Recent Progress in Metal‐Free Covalent Organic Frameworks as Heterogeneous Catalysts

Covalent organic frameworks (COFs), connecting different organic units into one system through covalent bonds, are crystalline organic porous materials with 2D or 3D networks. Compared with conventional porous materials such as inorganic zeolite, active carbon, and metal‐organic frameworks, COFs are a new type of porous materials with well‐designed pore structure, high surface area, outstanding stability, and easy functionalization at the molecular level, which have attracted extensive attention in various fields, such as energy storage, gas separation, sensing, photoluminescence, proton conduction, magnetic properties, drug delivery, and heterogeneous catalysis. Herein, the recent advances in metal‐free COFs as a versatile platform for heterogeneous catalysis in a wide range of chemical reactions are presented and the synthetic strategy and promising catalytic applications of COF‐based catalysts (including photocatalysis) are summarized. According to the types of catalytic reactions, this review is divided into the following five parts for discussion: achiral organic catalysis, chiral organic conversion, photocatalytic organic reactions, photocatalytic energy conversion (including water splitting and the reduction of carbon dioxide), and photocatalytic pollutant degradation. Furthermore, the remaining challenges and prospects of COFs as heterogeneous catalysts are also presented.     

Molecular Insertion: A Master Key to Unlock Smart Photoelectric Responses of Covalent Organic Frameworks

Covalent organic frameworks (COFs) show potentials in prominent photoelectric responses by judicious structural design. However, from the selections of monomers and condensation reactions to the synthesis procedures, the acquisition of photoelectric COFs has to meet overmuch high conditions, limiting the breakthrough and modulation in photoelectric responses. Herein, the study reports a creative “lock-key model” based on molecular insertion strategy. A COF with suitable cavity size, TP-TBDA, is used as the host to load guests. Merely through the volatilization of mixed solution, TP-TBDA and guests can be spontaneously assembled via non-covalent interactions (NCIs) to produce molecular-inserted COFs (MI-COFs). The NCIs between TP-TBDA and guests acted as a bridge to facilitate charge transfer in MI-COFs, unlocking the photoelectric responses of TP-TBDA. By exploiting the controllability of NCIs, the MI-COFs can realize the smart modulation of photoelectric responses by simply changing the guest molecule, thus avoiding the arduous selection of monomers and condensation reactions required by conventional COFs. The construction of molecular-inserted COFs circumvents complicated procedures for achieving performance improvement and modulation, providing a promising direction to construct late-model photoelectric responsive materials.     

Structural Approaches to Control Interlayer Interactions in 2D Covalent Organic Frameworks

The ability to design and synthesize monomers can affect fundamental aspects in 2D covalent organic frameworks, such as dimensionality, topology, and pore size. Besides this, the structure of the monomers can also affect interlayer interactions, which provide an additional means to influence crystallinity, layer arrangement, interlayer distances, and exfoliability. Herein, some of the effects that the structure of monomers can have on the interlayer interactions in 2D covalent organic frameworks and related materials are illustrated.     

Nanoarchitectured Design of Porous Materials and Nanocomposites from Metal‐Organic Frameworks

The emergence of metal‐organic frameworks (MOFs) as a new class of crystalline porous materials is attracting considerable attention in many fields such as catalysis, energy storage and conversion, sensors, and environmental remediation due to their controllable composition, structure and pore size. MOFs are versatile precursors for the preparation of various forms of nanomaterials as well as new multifunctional nanocomposites/hybrids, which exhibit superior functional properties compared to the individual components assembling the composites. This review provides an overview of recent developments achieved in the fabrication of porous MOF‐derived nanostructures including carbons, metal oxides, metal chalcogenides (metal sulfides and selenides), metal carbides, metal phosphides and their composites. Finally, the challenges and future trends and prospects associated with the development of MOF‐derived nanomaterials are also examined.     

Standing Carbon‐Supported Trace Levels of Metal Derived from Covalent Organic Framework for Electrocatalysis

Single atom catalysts (SACs) are receiving increasing interests due to their high theoretical catalytic efficiency and intriguing physiochemical properties. However, most of the synthetic methodologies involve high‐temperature treatment. This usually leads to limited control over the spatial distribution of metal sites and collapse of porous network that result in limited active site exposure. A strategy to construct SAC by using a covalent organic framework as the precursor is reported in this study. The as‐prepared catalyst is mainly composed of standing carbon layers with the presence of edge‐site hosted metal single atoms. Such structure configuration not only allows full site exposure but also endows the metal site with high intrinsic activity. With a trace amount of cobalt loading (0.17 wt%), the nanorice‐shaped catalyst displays promising electrochemical activities toward catalyzing the oxygen reduction reaction in both alkaline and acidic medium. An ultrahigh mass activity of 838 A g_Co^–1 at 0.9 V is achieved in the acidic electrolyte. This work suggests a new route to design SACs based on covalent organic framework for energy storage and conversion devices.     

Engineering Single Cu Sites into Covalent Organic Framework for Selective Photocatalytic CO2 Reduction

Photocatalytic CO₂ conversion into value-added chemicals is a promising route but remains challenging due to poor product selectivity. Covalent organic frameworks (COFs) as an emerging class of porous materials are considered as promising candidates for photocatalysis. Incorporating metallic sites into COF is a successful strategy to realize high photocatalytic activities. Herein, 2,2′-bipyridine-based COF bearing non-noble single Cu sites is fabricated by chelating coordination of dipyridyl units for photocatalytic CO₂ reduction. The coordinated single Cu sites not only significantly enhance light harvesting and accelerate electron–hole separation but also provide adsorption and activation sites for CO₂ molecules. As a proof of concept, the Cu-Bpy-COF as a representative catalyst exhibits superior photocatalytic activity for reducing CO₂ to CO and CH₄ without photosensitizer, and impressively, the product selectivity of CO and CH₄ can be readily modulated only by changing reaction media. Experimental and theoretical results reveal the crucial role of single Cu sites in promoting photoinduced charge separation and solvent effect in regulating product selectivity, which provides an important sight onto the design of COF photocatalysts for selective CO₂ photoreduction.     

Ultrahigh Responsivity Photodetectors of 2D Covalent Organic Frameworks Integrated on Graphene

2D materials exhibit superior properties in electronic and optoelectronic fields. The wide demand for high-performance optoelectronic devices promotes the exploration of diversified 2D materials. Recently, 2D covalent organic frameworks (COFs) have emerged as next-generation layered materials with predesigned π-electronic skeletons and highly ordered topological structures, which are promising for tailoring their optoelectronic properties. However, COFs are usually produced as solid powders due to anisotropic growth, making them unreliable to integrate into devices. Here, by selecting tetraphenylethylene monomers with photoelectric activity, elaborately designed photosensitive 2D-COFs with highly ordered donor-acceptor topologies are in situ synthesized on graphene, ultimately forming COF-graphene heterostructures. Ultrasensitive photodetectors are successfully fabricated with the COF_ETBC–TAPT-graphene heterostructure and exhibited an excellent overall performance with a photoresponsivity of ≈3.2 × 10⁷ A W⁻¹ at 473 nm and a time response of ≈1.14 ms. Moreover, due to the high surface area and the polarity selectivity of COFs, the photosensing properties of the photodetectors can be reversibly regulated by specific target molecules. The research provides new strategies for building advanced functional devices with programmable material structures and diversified regulation methods, paving the way for a generation of high-performance applications in optoelectronics and many other fields.