Nanogap Engineered Plasmon‐Enhancement in Photocatalytic Solar Hydrogen Conversion

Graphitic carbon nitride modified with plasmonic Ag@SiO₂ core–shell nanoparticles (g‐C₃N₄/Ag@SiO₂) are proposed for enhanced photocatalytic solar hydrogen evolution under visible light. Nanosized gaps between the plasmonic Ag nanoparticles (NPs) and g‐C₃N₄ are created and precisely modulated to be 8, 12, 17, and 21 nm by coating SiO₂ shells on the Ag NPs. The optimized photocatalytic hydrogen production activity for g‐C₃N₄/Ag@SiO₂ is achieved with a nanogap of 12 nm (11.4 μmol h⁻¹) to be more than twice as high as that of pure g‐C₃N₄ (5.6 μmol h⁻¹). The plasmon resonance energy transfer (PRET) effect of Ag NPs is innovatively proved from a physical view on polymer semiconductors for photoredox catalysis. The PRET effect favors the charge carrier separation by inducing electron–hole pairs efficiently formed in the near‐surface region of g‐C₃N₄. Furthermore, via engineering the width of the nanogap, the PRET and energy‐loss Förster resonance energy transfer processes are perfectly balanced, resulting in considerable enhancement of photocatalytic hydrogen production activity over the g‐C₃N₄/Ag@SiO₂ plasmonic photocatalyst.     

Quantitative Determination of Contribution by Enhanced Local Electric Field,Antenna‐Amplified Light Scattering,and Surface Energy Transfer to the Performance of Plasmonic Organic Solar Cells

Plasmonic metal nanostructures are widely used as subwavelength light concentrators to enhance light harvesting of organic solar cells through two photophysical effects, including enhanced local electric field (ELEF) and antenna‐amplified light scattering (AALS), while their adverse quenching effect from surface energy transfer (SET) should be suppressed. In this work, a comprehensive study to unambiguously distinguish and quantitatively determine the specific influence and contribution of each effect on the overall performance of organic solar cells incorporated with Ag@SiO₂ core–shell nanoparticles (NPs) is presented. By investigating the photon conversion efficiency (PCE) as a function of the SiO₂ shell thickness, a strong competition between the ELEF and SET effects in the performance of the devices with the NPs embedded in the active layers is found, leading to a maximum PCE enhancement of 12.4% at the shell thickness of 5 nm. The results give new insights into the fundamental understanding of the photophysical mechanisms responsible for the performance enhancement of plasmonic organic solar cells and provide important guidelines for designing more‐efficient plasmonic solar cells in general.     

High‐Performance Inorganic Perovskite Quantum Dot–Organic Semiconductor Hybrid Phototransistors

All‐inorganic lead halide perovskite quantum dots (IHP QDs) have great potentials in photodetectors. However, the photoresponsivity is limited by the low charge transport efficiency of the IHP QD layers. High‐performance phototransistors based on IHP QDs hybridized with organic semiconductors (OSCs) are developed. The smooth surface of IHP QD layers ensures ordered packing of the OSC molecules above them. The OSCs significantly improve the transportation of the photoexcited charges, and the gate effect of the transistor structure significantly enhances the photoresponsivity while simultaneously maintaining high I _photo/I _dark ratio. The devices exhibit outstanding optoelectronic properties in terms of photoresponsivity (1.7 × 10⁴ A W^?1), detectivity (2.0 × 10¹⁴ Jones), external quantum efficiency (67000%), I _photo/I _dark ratio (8.1 × 10⁴), and stability (100 d in air). The overall performances of our devices are superior to state‐of‐the‐art IHP photodetectors. The strategy utilized here is general and can be easily applied to many other perovskite photodetectors.     

DNA‐Assembled Core‐Satellite Upconverting‐Metal–Organic Framework Nanoparticle Superstructures for Efficient Photodynamic Therapy

DNA‐mediated assembly of core–satellite structures composed of Zr(IV)‐based porphyrinic metal‐organic framework (MOF) and NaYF₄,Yb,Er upconverting nanoparticles (UCNPs) for photodynamic therapy (PDT) is reported. MOF NPs generate singlet oxygen (¹O₂) upon photoirradiation with visible light without the need for additional small molecule, diffusional photosensitizers such as porphyrins. Using DNA as a templating agent, well‐defined MOF–UCNP clusters are produced where UCNPs are spatially organized around a centrally located MOF NP. Under NIR irradiation, visible light emitted from the UCNPs is absorbed by the core MOF NP to produce ¹O₂ at significantly greater amounts than what can be produced from simply mixing UCNPs and MOF NPs. The MOF–UCNP core–satellite superstructures also induce strong cell cytotoxicity against cancer cells, which are further enhanced by attaching epidermal growth factor receptor targeting affibodies to the PDT clusters, highlighting their promise as theranostic photodynamic agents.     

Planar silver nanowire,carbon nanotube and PEDOT:PSS nanocomposite transparent electrodes

Abstract

Highly conductive, transparent and flexible planar electrodes were fabricated using interwoven silver nanowires and single-walled carbon nanotubes (AgNW:SWCNT) in a PEDOT:PSS matrix via an epoxy transfer method from a silicon template. The planar electrodes achieved a sheet resistance of 6.6 ± 0.0 Ω/□ and an average transmission of 86% between 400 and 800 nm. A high figure of merit of 367 Ω^?1 is reported for the electrodes, which is much higher than that measured for indium tin oxide and reported for other AgNW composites. The AgNW:SWCNT:PEDOT:PSS electrode was used to fabricate low temperature (annealing free) devices demonstrating their potential to function with a range of organic semiconducting polymer:fullerene bulk heterojunction blend systems.     

Gap‐Mode Surface‐Plasmon‐Enhanced Photoluminescence and Photoresponse of MoS2

2D materials hold great potential for designing novel electronic and optoelectronic devices. However, 2D material can only absorb limited incident light. As a representative 2D semiconductor, monolayer MoS₂ can only absorb up to 10% of the incident light in the visible, which is not sufficient to achieve a high optical‐to‐electrical conversion efficiency. To overcome this shortcoming, a “gap‐mode” plasmon‐enhanced monolayer MoS₂ fluorescent emitter and photodetector is designed by squeezing the light‐field into Ag shell‐isolated nanoparticles–Au film gap, where the confined electromagnetic field can interact with monolayer MoS₂. With this gap‐mode plasmon‐enhanced configuration, a 110‐fold enhancement of photoluminescence intensity is achieved, exceeding values reached by other plasmon‐enhanced MoS₂ fluorescent emitters. In addition, a gap‐mode plasmon‐enhanced monolayer MoS₂ photodetector with an 880% enhancement in photocurrent and a responsivity of 287.5 A W^?1 is demonstrated, exceeding previously reported plasmon‐enhanced monolayer MoS₂ photodetectors.     

Dominance of Plasmonic Resonant Energy Transfer over Direct Electron Transfer in Substantially Enhanced Water Oxidation Activity of BiVO4 by Shape‐Controlled Au Nanoparticles

The performance of plasmonic Au nanostructure/metal oxide heterointerface shows great promise in enhancing photoactivity, due to its ability to confine light to the small volume inside the semiconductor and modify the interfacial electronic band structure. While the shape control of Au nanoparticles (NPs) is crucial for moderate bandgap semiconductors, because plasmonic resonance by interband excitations overlaps above the absorption edge of semiconductors, its critical role in water splitting is still not fully understood. Here, first, the plasmonic effects of shape‐controlled Au NPs on bismuth vanadate (BiVO₄) are studied, and a largely enhanced photoactivity of BiVO₄ is reported by introducing the octahedral Au NPs. The octahedral Au NP/BiVO₄ achieves 2.4 mA cm^?2 at the 1.23 V versus reversible hydrogen electrode, which is the threefold enhancement compared to BiVO₄. It is the highest value among the previously reported plasmonic Au NPs/BiVO₄. Improved photoactivity is attributed to the localized surface plasmon resonance; direct electron transfer (DET), plasmonic resonant energy transfer (PRET). The PRET can be stressed over DET when considering the moderate bandgap semiconductor. Enhanced water oxidation induced by the shape‐controlled Au NPs is applicable to moderate semiconductors, and shows a systematic study to explore new efficient plasmonic solar water splitting cells.     

Planar silver nanowire,carbon nanotube and PEDOT:PSS nanocomposite transparent electrodes

Highly conductive, transparent and flexible planar electrodes were fabricated using interwoven silver nanowires and single-walled carbon nanotubes (AgNW:SWCNT) in a PEDOT:PSS matrix via an epoxy transfer method from a silicon template. The planar electrodes achieved a sheet resistance of 6.6 ± 0.0 Ω/□ and an average transmission of 86% between 400 and 800 nm. A high figure of merit of 367 Ω⁻¹ is reported for the electrodes, which is much higher than that measured for indium tin oxide and reported for other AgNW composites. The AgNW:SWCNT:PEDOT:PSS electrode was used to fabricate low temperature (annealing free) devices demonstrating their potential to function with a range of organic semiconducting polymer:fullerene bulk heterojunction blend systems.     

A General Approach for Lab‐to‐Manufacturing Translation on Flexible Organic Solar Cells

The blossoming of organic solar cells (OSCs) has triggered enormous commercial applications, due to their high‐efficiency, light weight, and flexibility. However, the lab‐to‐manufacturing translation of the praisable performance from lab‐scale devices to industrial‐scale modules is still the Achilles' heel of OSCs. In fact, it is urgent to explore the mechanism of morphological evolution in the bulk heterojunction (BHJ) with different coating/printing methods. Here, a general approach to upscale flexible organic photovoltaics to module scale without obvious efficiency loss is demonstrated. The shear impulse during the coating/printing process is first applied to control the morphology evolution of the BHJ layer for both fullerene and nonfullerene acceptor systems. A quantitative transformation factor of shear impulse between slot‐die printing and spin‐coating is detected. Compelling results of morphological evolution, molecular stacking, and coarse‐grained molecular simulation verify the validity of the impulse translation. Accordingly, the efficiency of flexible devices via slot‐die printing achieves 9.10% for PTB7‐Th:PC₇₁BM and 9.77% for PBDB‐T:ITIC based on 1.04 cm² . Furthermore, 15 cm² flexible modules with effective efficiency up to 7.58% (PTB7‐Th:PC₇₁BM) and 8.90% (PBDB‐T:ITIC) are demonstrated with satisfying mechanical flexibility and operating stability. More importantly, this work outlines the shear impulse translation for organic printing electronics.     

High‐Performance Flexible Organic Nano‐Floating Gate Memory Devices Functionalized with Cobalt Ferrite Nanoparticles

Nano‐floating gate memory (NFGM) devices are transistor‐type memory devices that use nanostructured materials as charge trap sites. They have recently attracted a great deal of attention due to their excellent performance, capability for multilevel programming, and suitability as platforms for integrated circuits. Herein, novel NFGM devices have been fabricated using semiconducting cobalt ferrite (CoFe₂O₄) nanoparticles (NPs) as charge trap sites and pentacene as a p‐type semiconductor. Monodisperse CoFe₂O₄ NPs with different diameters have been synthesized by thermal decomposition and embedded in NFGM devices. The particle size effects on the memory performance have been investigated in terms of energy levels and particle–particle interactions. CoFe₂O₄ NP‐based memory devices exhibit a large memory window (≈73.84 V), a high read current on/off ratio (read I_on/I_off) of ≈2.98 × 10³_, and excellent data retention. Fast switching behaviors are observed due to the exceptional charge trapping/release capability of CoFe₂O₄ NPs surrounded by the oleate layer, which acts as an alternative tunneling dielectric layer and simplifies the device fabrication process. Furthermore, the NFGM devices show excellent thermal stability, and flexible memory devices fabricated on plastic substrates exhibit remarkable mechanical and electrical stability. This study demonstrates a viable means of fabricating highly flexible, high‐performance organic memory devices.     

An Optically Flat Conductive Outcoupler Using Core/Shell Ag/ZnO Nanochurros

Transparent conductive electrodes (TCEs) featuring a smooth surface are indispensable for preserving pristine electrical characteristics in optoelectronic and transparent electronic devices. For high‐efficiency organic light emitting diodes (OLEDs), a high outcoupling efficiency, which is crucial, is only achieved by incorporating a wavelength‐scale undulating surface into a TCE layer, but this inevitably degrades device performance. Here, an optically flat, high‐conductivity TCE composed of core/shell Ag/ZnO nanochurros (NCs) is reported embedded within a resin film on a polyethylene terephthalate substrate, simultaneously serving as an efficient outcoupler and a flexible substrate. The ZnO NCs are epitaxially grown on the {100} planes of a pentagonal Ag core and the length of ZnO shells is precisely controlled by the exposure time of Xe lamp. Unlike Ag nanowires films, the Ag/ZnO NCs films markedly boost the optical tunneling of light. Green‐emitting OLEDs (2.78 × 3.5 mm²) fabricated with the Ag/ZnO TCE exhibit an 86% higher power efficiency at 1000 cd m^?2 than ones with an Sn‐doped indium oxide TCE. A full‐vectorial electromagnetic simulation suggests the suppression of plasmonic absorption losses within their Ag cores. These results provide a feasibility of multifunctional TCEs with synthetically controlled core/shell nanomaterials toward the development of high‐efficiency LED and solar cell devices.     

Chiral Octahydro‐Binaphthol Compound‐Based Thermally Activated Delayed Fluorescence Materials for Circularly Polarized Electroluminescence with Superior EQE of 32.6% and Extremely Low Efficiency Roll‐Off

Circularly polarized organic light‐emitting diodes (CP‐OLEDs) are particularly favorable for the direct generation of CP light, and they demonstrate a promising application in 3D display. However, up to now, such CP devices have suffered from low brightness, insufficient efficiency, and serious efficiency roll‐off. In this study, a pair of octahydro‐binaphthol ( OBN )‐based chiral emitting enantiomers, (R/S)‐OBN‐Cz , are developed by ingeniously merging a chiral source and a luminophore skeleton. These chirality–acceptor–donor (C–A–D)‐type and rod‐like compounds concurrently generate thermally activated delayed fluorescence with a small ΔE_ST of 0.037 eV, as well as a high photoluminescence quantum yield of 92% and intense circularly polarized photoluminescence with dissymmetry factors (|g_PL|) of ≈2.0 × 10^?3 in thin films. The CP‐OLEDs based on (R/S)‐OBN‐Cz enantiomers not only display obvious circularly polarized electroluminescence signals with a |g_EL| of ≈2.0 × 10^?3, but also exhibit superior efficiencies with maximum external quantum efficiency (EQE_max) up to 32.6% and extremely low efficiency roll‐off with an EQE of 30.6% at 5000 cd m^?2, which are the best performances among the reported CP devices to date.     

A Centimeter‐Scale Inorganic Nanoparticle Superlattice Monolayer with Non‐Close‐Packing and its High Performance in Memory Devices

Due to the near‐field coupling effect, non‐close‐packed nanoparticle (NP) assemblies with tunable interparticle distance (d) attract great attention and show huge potential applications in various functional devices, e.g., organic nano‐floating‐gate memory (NFGM) devices. Unfortunately, the fabrication of device‐scale non‐close‐packed 2D NPs material still remains a challenge, limiting its practical applications. Here, a facile yet robust “rapid liquid–liquid interface assembly” strategy is reported to generate a non‐close‐packed AuNP superlattice monolayer (SM) on a centimeter scale for high‐performance pentacene‐based NFGM. The d and hence the surface plasmon resonance spectra of SM can be tailored by adjusting the molecular weight of tethered polymers. Precise control over the d value allows the successful fabrication of photosensitive NFGM devices with highly tunable performances from short‐term memory to nonvolatile data storage. The best performing nonvolatile memory device shows remarkable 8‐level (3‐bit) storage and a memory ratio over 10⁵ even after 10 years compared with traditional devices with a AuNP amorphous monolayer. This work provides a new opportunity to obtain large area 2D NPs materials with non‐close‐packed structure, which is significantly meaningful to microelectronic, photovoltaics devices, and biochemical sensors.     

Boosting Perovskite Photodetector Performance in NIR Using Plasmonic Bowtie Nanoantenna Arrays

Triple‐cation mixed metal halide perovskites are important optoelectronic materials due to their high photon to electron conversion efficiency, low exciton binding energy, and good thermal stability. However, the perovskites have low photon to electron conversion efficiency in near‐infrared (NIR) due to their weak intrinsic absorption at longer wavelength, especially near the band edge and over the bandgap wavelength. A plasmonic functionalized perovskite photodetector (PD) is designed and fabricated in this study, in which the perovskite ((Cs_0.06FA_0.79MA_0.15)Pb(I_0.85Br_0.15)₃) active materials are spin‐coated on the surface of Au bowtie nanoantenna (BNA) arrays substrate. Under 785 nm laser illumination, near the bandedge of perovskite, the fabricated BNA‐based plasmonic PD exhibits ≈2962% enhancement in the photoresponse over the Si/SiO₂‐based normal PD. Moreover, the detectivity of the plasmonic PD has a value of 1.5 × 10¹² with external quantum efficiency as high as 188.8%, more than 30 times over the normal PD. The strong boosting in the plasmonic PD performance is attributed to the enhanced electric field around BNA arrays through the coupling of localized surface plasmon resonance. The demonstrated BNA‐perovskite design can also be used to enhance performance of other optoelectronic devices, and the concept can be extended to other spectral regions with different active materials.     

Surface Plasmon‐Enhanced Photodetection in Few Layer MoS2 Phototransistors with Au Nanostructure Arrays

2D Molybdenum disulfide (MoS₂) is a promising candidate material for high‐speed and flexible optoelectronic devices, but only with low photoresponsivity. Here, a large enhancement of photocurrent response is obtained by coupling few‐layer MoS₂ with Au plasmonic nanostructure arrays. Au nanoparticles or nanoplates placed onto few‐layer MoS₂ surface can enhance the local optical field in the MoS₂ layer, due to the localized surface plasmon (LSP) resonance. After depositing 4 nm thick Au nanoparticles sparsely onto few‐layer MoS₂ phototransistors, a doubled increase in the photocurrent response is observed. The photocurrent of few‐layer MoS₂ phototransistors exhibits a threefold enhancement with periodic Au nanoarrays. The simulated optical field distribution confirms that light can be trapped and enhanced near the Au nanoplates. These findings offer an avenue for practical applications of high performance MoS₂‐based optoelectronic devices or systems in the future.     

Enhanced Electroluminescence from Organic Light‐Emitting Diodes with an Organic–Inorganic Perovskite Host Layer

The development of host materials with high performance is essential for fabrication of efficient and stable organic light‐emitting diodes (OLEDs). Although host materials used in OLEDs are typically organics, in this study, it is shown that the organic–inorganic perovskite CH₃NH₃PbCl₃ (MAPbCl₃) can be used as a host layer for OLEDs. Vacuum‐evaporated MAPbCl₃ films have a wide band gap of about 3 eV and very high and relatively balanced hole and electron mobilities, which are suitable for the host material. Photoluminescence and electroluminescence take place through energy transfer from MAPbCl₃ to an organic emitter in films. Incorporation of an MAPbCl₃ host layer into OLEDs leads to a reduction of driving voltage and enhancement of external quantum efficiency as compared to devices with a conventional organic host layer. Additionally, OLEDs with an MAPbCl₃ host layer demonstrate very good operational stability under continuous current operation. These results can be extensively applied to organic‐ and perovskite‐based optoelectronics.     

Junction‐Free Electrospun Ag Fiber Electrodes for Flexible Organic Light‐Emitting Diodes

Fabrication of junction‐free Ag fiber electrodes for flexible organic light‐emitting diodes (OLEDs) is demonstrated. The junction‐free Ag fiber electrodes are fabricated by electrospun polymer fibers used as an etch mask and wet etching of Ag thin film. This process facilitates surface roughness control, which is important in transparent electrodes based on metal wires to prevent electrical instability of the OLEDs. The transmittance and resistance of Ag fiber electrodes can be independently adjusted by controlling spinning time and Ag deposition thickness. The Ag fiber electrode shows a transmittance of 91.8% (at 550 nm) at a sheet resistance of 22.3 Ω □^?1, leading to the highest OLED efficiency. In addition, Ag fiber electrodes exhibit excellent mechanical durability, as shown by measuring the change in resistance under repeatable mechanical bending and various bending radii. The OLEDs with Ag fiber electrodes on a flexible substrate are successfully fabricated, and the OLEDs show an enhancement of EQE (≈19%) compared to commercial indium tin oxide electrodes.     

High‐Efficiency Red Organic Light‐Emitting Diodes with External Quantum Efficiency Close to 30% Based on a Novel Thermally Activated Delayed Fluorescence Emitter

Researchers have spared no effort to design new thermally activated delayed fluorescence (TADF) emitters for high‐efficiency organic light‐emitting diodes (OLEDs). However, efficient long‐wavelength TADF emitters are rarely reported. Herein, a red TADF emitter, TPA–PZCN, is reported, which possesses a high photoluminescence quantum yield (Φ_PL) of 97% and a small singlet–triplet splitting (ΔE_ST) of 0.13 eV. Based on the superior properties of TPA–PZCN, red, deep‐red, and near‐infrared (NIR) OLEDs are fabricated by utilizing different device structure strategies. The red devices obtain a remarkable maximum external quantum efficiency (EQE) of 27.4% and an electroluminescence (EL) peak at 628 nm with Commission Internationale de L'Eclairage (CIE) coordinates of (0.65, 0.35), which represents the best result with a peak wavelength longer than 600 nm among those of the reported red TADF devices. Furthermore, an exciplex‐forming cohost strategy is adopted. The devices achieve a record EQE of 28.1% and a deep‐red EL peak at 648 nm with the CIE coordinates of (0.66, 0.34). Last, nondoped devices exhibit 5.3% EQE and an NIR EL peak at 680 nm with the CIE coordinates of (0.69, 0.30).     

Sensitivity Tuning through Additive Heterogeneous Plasmon Coupling between 3D Assembled Plasmonic Nanoparticle and Nanocup Arrays

Plasmonic substrates have fixed sensitivity once the geometry of the structure is defined. In order to improve the sensitivity, significant research effort has been focused on designing new plasmonic structures, which involves high fabrication costs; however, a method is reported for improving sensitivity not by redesigning the structure but by simply assembling plasmonic nanoparticles (NPs) near the evanescent field of the underlying 3D plasmonic nanostructure. Here, a nanoscale Lycurgus cup array (nanoLCA) is employed as a base colorimetric plasmonic substrate and an assembly template. Compared to the nanoLCA, the NP assembled nanoLCA (NP‐nanoLCA) exhibits much higher sensitivity for both bulk refractive index sensing and biotin–streptavidin binding detection. The limit of detection of the NP‐nanoLCA is at least ten times smaller when detecting biotin–streptavidin conjugation. The numerical calculations confirm the importance of the additive plasmon coupling between the NPs and the nanoLCA for a denser and stronger electric field in the same 3D volumetric space. Tunable sensitivity is accomplished by controlling the number of NPs in each nanocup, or the number density of the hot spots. This simple yet scalable and cost‐effective method of using additive heterogeneous plasmon coupling effects will benefit various chemical, medical, and environmental plasmon‐based sensors.     

High Efficiency Organic Solar Cells Achieved by the Simultaneous Plasmon‐Optical and Plasmon‐Electrical Effects from Plasmonic Asymmetric Modes of Gold Nanostars

The plasmon‐optical effects have been utilized to optically enhance active layer absorption in organic solar cells (OSCs). The exploited plasmonic resonances of metal nanomaterials are typically from the fundamental dipole/high‐order modes with narrow spectral widths for regional OSC absorption improvement. The conventional broadband absorption enhancement (using plasmonic effects) needs linear‐superposition of plasmonic resonances. In this work, through strategic incorporation of gold nanostars (Au NSs) in between hole transport layer (HTL) and active layer, the excited plasmonic asymmetric modes offer a new approach toward broadband enhancement. Remarkably, the improvement is explained by energy transfer of plasmonic asymmetric modes of Au NS. In more detail, after incorporation of Au NSs, the optical power in electron transport layer transfers to active layer for improving OSC absorption, which otherwise will become dissipation or leakage as the role of carrier transport layer is not for photon‐absorption induced carrier generation. Moreover, Au NSs simultaneously deliver plasmon‐electrical effects which shorten transport path length of the typically low‐mobility holes and lengthen that of high‐mobility electrons for better balanced carrier collection. Meanwhile, the resistance of HTL is reduced by Au NSs. Consequently, power conversion efficiency of 10.5% has been achieved through cooperatively plasmon‐optical and plasmon‐electrical effects of Au NSs.