共查询到20条相似文献,搜索用时 78 毫秒
1.
导航吊舱是战斗机超低空突袭作战时的必备外挂设备,可保证飞机超低空飞行的安全;为了提供一种适应作战环境的方法,提高飞机有效低空突防能力,设计了低空导航吊舱地形跟随算法;通过建立雷达工作模型与无线电工作模型分别得到飞行控制角指令,然后对角指令进行数据融合得到最终适合飞机进行地形跟随飞行的指令;在随机地图上利用MATLAB对该算法进行了仿真,结果表明该算法很好地实现了飞机飞行高度为150 m的地形跟随和突防任务。 相似文献
2.
控制组件动态配置/重构可使无人直升机飞行控制系统适应自身条件和/或外部环境的变化,实现自主飞行.本文介绍一种无人自主飞行直升机分布式控制系统结构方案,提出了虚拟资源网在无人直升机飞行控制系统中的全新应用,实现控制组件的分布式计算和动态配置/重构.控制组件设计在地面站或不同的机载计算机系统上,构成分布式飞行控制系统.虚拟资源网为无人直升机依据任务在线要求重配所能得到的资源提供了独特的能力.控制组件以网络资源形式实现使组件具有灵活性、重用性和即插即用能力,可缩短无人了直升机飞行控制系统的研发周期. 相似文献
3.
4.
为提高无人直升机的控制性能,提出了一种基于Dubins曲线的轨迹规划算法,并对其各个部分的实现进行了研究和设计。该算法利用Dubins曲线原理对定点飞行任务的两点或者多点目标进行分析计算,寻找出一条最短的飞行路径,从而提高了飞行效率。根据无人直升机系统多变量、非线性和强耦合的特点,采用串级PID方法设计了飞行控制器,该控制器能够修正无人直升机的姿态和位置,从而提高了轨迹规划的稳定性和准确性。最后,以某小型无人直升机为实验平台表明了该轨迹规划算法和控制器的可行性。 相似文献
5.
飞机飞行轨迹仿真系统设计与实现 总被引:1,自引:0,他引:1
捷联惯导软件测试中,一般难以得到真实的航迹数据和飞行器的各种参数,针对要获得飞行轨迹数据和惯性器件输出参数,设计飞行轨迹仿真系统利用LabVIEW虚拟平台,将战斗机各种典型的飞行动作进行模块化处理,自由组合成一条飞行轨迹用于实时仿真测试.系统中的轨迹建模以几何算法为主,避免了采用差分算法时产生的计算误差,实现飞行航迹各参数的实时动态显示.对飞行中空气阻力对轨迹的影响进行了分析,加入空气阻力并建立新的模型,得到误差曲线.实验结果表明,系统能够实现轨迹的动态特性,同时空气阻力的影响也与理论相符,可以得到有用测试数据. 相似文献
6.
7.
飞行模拟器视景系统中实时地形的研究与实现 总被引:1,自引:0,他引:1
对飞行模拟器视景系统中地形的生成算法进行了研究.为兼顾地形的渲染逼真度与渲染效率,采用LOD(Level Of Detail)算法分割地形网格,同时通过添加修补三角形的方法解决了创建渲染三角形过程中产生的地面撕裂现象.地面的类型和陆地的高度信息使用256色位图来存储,并为地面贴上相应的纹理增加地形的真实性.为进一步提高渲染效率,将地形分块,实时渲染视野范围内的地形块,得到了比较满意的效果. 相似文献
8.
超低空空投货物出舱过程的动态逆鲁棒控制 总被引:3,自引:0,他引:3
针对运输机在执行超低空空投任务时,地面效应的作用使飞机的气动特性发生改变,货物向舱门的移动过程使飞机的受力和力矩发生变化,货物出舱过程和地面效应的作用使飞机姿态和轨迹都大幅度偏离空投前的稳定飞行状态,如果控制失当,极易使飞机振荡发散,导致飞行事故的问题,设计一控制器保证超低空空投货物出舱过程中运输机的稳定性和安全性.由于被控对象是一个多变量耦合且参数变化的非线性系统,提出了一种基于动态逆理论和鲁棒控制理论的解决方案,控制器内环采用动态逆方法使系统解耦线性化,外环采用H∞鲁棒控制方法解决不确定性问题.仿真结果表明,该控制器能够很好地保持飞行速度和轨迹、稳定飞机姿态,具有良好的控制效果,且对于系统不确定性具有较强的鲁棒性. 相似文献
9.
10.
11.
目的:解决在FLASH中导入声音的问题.方法:对FLASH不支持的声音格式采取音频压缩的方法.结果:可成功将压缩后的声音文件导入到FLASH中.结论:在FLASH中使用声音可以使FLASH动画具有良好的动画效果. 相似文献
12.
本文对于金属切削这一生产过程中所出现的不稳定问题,利用频率特性法中的奈氏判据,对其进行分析,从而找出消除自激振荡和达到切削过程绝对稳定的条件 相似文献
13.
14.
人体测量学并不是现代社会的产物。有着很长发展历史的人体比例理论中就包含了现代人体测量学的基本内容,尽管其还不够系统完整,但至少说明了在艺术创作中诞生的人体比例理论对现代人体测量学的影响。并随着时间的推移而不断的完善发展,为现代人体测量学的系统提出奠定了坚实的基础。 相似文献
15.
David Smith 《AI & Society》2003,17(1):1-11
The paper questions the ability of current university systems to respond appropriately to the complex demands of an Information
Economy. It argues that new relationships between creative subjects and technology require new thinking about the nature and
purpose of universities per se. In particular, attention is drawn to the growing involvement of the private sector in higher
education. It is argued that it may not be appropriate to think of the `university of the future' in terms of current public
sector and quasi public sector institutions, but rather in terms of an emporium, based on an international trade in educational
services, and with the `University' as we now understand it occupying the functions of licensing, quality assurance and cultural
custodianship.
Accepted: 25 June 2002 相似文献
16.
熊林 《数字社区&智能家居》2007,3(14):428-429
虚拟化技术是当今服务器技术的一个主流方向,也是一项在计算机领域具有革命性意义的技术.作为x86架构体系下虚拟化技术的领军者-VMware,在技术上有其独到之处.研究VMware的技术与应用,对探知其优秀的技术特点,了解其成熟的产品体系有着现实意义. 相似文献
17.
All titanium alloys are highly reactive in the molten condition and so are usually melted in a water-cooled copper crucible to avoid contamination using processes such as Induction Skull Melting (ISM). These provide only limited superheat which, coupled with the surface turbulence inherent in most conventional mould filling processes, results in entrainment defects such as bubbles in the castings. To overcome these problems, a novel tilt-casting process has been developed in which the mould is attached directly to the ISM crucible holding the melt and the two are then rotated together to achieve a tranquil transfer of the metal into the mould. From the modelling point of view, this process involves complex three-phase flow, heat transfer and solidification. In this paper, the development of a numerical model of the tilt-casting process is presented featuring several novel algorithm developments introduced into a general CFD package (PHYSICA) to model the complex dynamic interaction of the liquid metal and melting atmosphere. These developments relate to the front tracking and heat transfer representations and to a casting-specific adaptation of the turbulence model to account for an advancing solid front. Calculations have been performed for a 0.4 m long turbine blade cast in a titanium aluminide alloy using different mould designs. It is shown that the feeder/basin configuration has a crucial influence on the casting quality. The computational results are validated against actual castings and are used to support an experimental programme. Although fluid flow and heat transfer are inseparable in a casting, the emphasis in this paper will be on the fluid dynamics of mould filling and its influence on cast quality rather than heat transfer and solidification which has been reported elsewhere. 相似文献
18.
19.
从品牌战略管理的高度出发,阐述了品牌传播符号语意的重要作用、常用方法以及要注意的问题,并以哈雷摩托为例进行了分析。 相似文献
20.
杨革 《数字社区&智能家居》2006,(14)
每一种媒体都有自身的长处,对某种特定的教学和学习有效。同样,每种媒体又不可避免地存在局限性,不利于某些教学和学习。因此,多媒体不是一种全能的媒体,也不可能代替传统媒体。现代媒体与传统媒体在教学中应相互补充,取长补短,相得益彰。 相似文献