Facile fabrication of poly(vinyl alcohol) gels and derivative aerogels

A facile preparation of poly(vinyl alcohol) (PVOH) hydrogels and their derivative PVOH/montmorillonite clay aerogels is reported, using water as solvent and divinylsulfone as crosslinking agent, making use of an environmentally friendly freeze drying process. The materials exhibit significantly increased mechanical properties after crosslinking. The compressive modulus of an aerogel prepared from an aqueous suspension containing 2 wt% PVOH/8 wt% clay increased 29-fold upon crosslinking, for example. Crosslinking of the polymer/clay aerogels decreased the onset decomposition temperature as measured by thermogravimetric analysis, and generated a more continuous structure at higher clay contents. Such polymer/clay aerogels are promising materials for low flammability applications.     

Pure shear deformation of physical and chemical gels of poly(vinyl alcohol)

Pure shear deformation reveals the significant differences in elastic properties of the poly(vinyl alcohol) (PVA) gels with almost identical initial modulus, but with different types of crosslinks, physical crosslinks formed by microcrystallites and chemical crosslinks made of covalent bonds. The ratio of the two principal stresses steeply increases with elongation in the physical gels, while that remains almost constant independently of stretching in the chemical gels. The marked growth of the stress ratio with elongation in the physical gels leads to the negative values of the derivative of the elastic free energy (W₂) with respect to the second invariant of the deformation tensor in the whole range of deformation, which is firstly observed for elastomeric materials. By contrast, the chemical gels exhibit the positive values of W₂ like most chemically crosslinked rubbers. Among the existing theories of rubber elasticity, the classical non-Gaussian three-chain model considering the effect of finite chain-length is qualitatively successful in accounting for the steep increase of the stress ratio and the negative values of W₂ in the physical gels, although it fails to reproduce the large difference in the stress-strain behavior among uniaxial, pure shear and equi-biaxial deformations. These features of the physical gels are expected to stem from the structural characteristics such as fewer amounts of slippery-trapped entanglement along network strands compared to the chemical PVA gels.     

Light scattering and viscoelasticity study of poly(vinyl alcohol)-borax aqueous solutions and gels

Poly(vinyl alcohol)-borate (PVA-borate) aqueous solutions properties with PVA concentrations ranging from 2 to 60 g/L and borax concentrations of 0.0 and 0.2 M were investigated at room temperature using static and dynamic light scattering (SLS and DLS), and dynamic viscoelasticity measurements. Light scattering and viscoelasticity data revealed that all the PVA-borate aqueous systems, except those with [PVA]≥40 g/L and [borax]=0.2 M, behaved as solutions. For PVA-borate aqueous systems with [PVA]≥40 g/L and [borax]=0.2 M, light scattering data revealed that these systems behaved like gels, but viscoelasticity data showed that these systems were in flow states. The experimental data suggest that PVA-borate aqueous systems with [PVA]≥40 g/L and [borax]=0.2 M are thermoreversible gels with finite equilibrium life time of thermoreversible borate-PVA di-diol crosslinks. The thermoreversible crosslinks can be observed by the non-perturbing light scattering technique but not by the pertubing rheometric method. These results indicate the advantage of light scattering relative to rheometers for studying the physical or reversible crosslink gels.     

Synthesis and characterization of hydrophobically modified poly(vinyl alcohol) hydrogel membrane

Hydrophobically modified poly(vinyl alcohol), [PVA] was synthesized by graft copolymerization of N-tertiary butyl acrylamide [NTBA] onto PVA by free radical polymerization. The incorporation of NTBA onto PVA chains was confirmed by elemental analysis, FT-IR and NMR spectroscopy. A series of graft copolymers with different contents of NTBA were prepared and membranes were casted from these copolymer solutions in dimethyl sulfoxide. The increase in hydrophobicity with an increase in NTBA content was investigated by contact angle measurements. The swelling behaviour of membranes as a function of temperature, hydrophobic content, annealing temperature and period was studied. Permeability of solutes through these membranes was investigated as a function of solute size, membrane hydrophobicity and temperature. The swelling behaviour of the copolymer membranes showed that the lower content of NTBA gives discontinuous volume transition with respect to temperature whereas, the presence of higher amounts of NTBA showed decreased swelling ratios with very little influence of temperature on the swelling. The permeabilities of solutes through these membranes were strongly dependent on the size of the solute, solution temperature and hydrophobicity of the membrane. The copolymer membranes were further characterized using DSC, DMA and XRD. The peak becomes broader as the NTBA content increases.     

Compression of poly(vinyl alcohol) gels by ultracentrifugal forces

Compression due to ultracentrifugal forces was investigated for poly(vinyl alcohol) (PVA) gels. The concentration gradient profiles for the gels were obtained by experiment and were then compared with a theoretical prediction. By the application of the centrifugal forces, the concentration gradient near the bottom increases sharply whereas the gradient inside the gel remains almost constant in the region far from the bottom. Further application of the centrifugal forces enhances the peak near the bottom. These are well explained by the theory proposed in the previous paper [Urayama et al. J Chem Phys 2005;122:024906.]. The frictional coefficient f for the PVA gels, which originates from the friction between the polymer network and solvent molecules, is estimated to be 3.5×10¹⁴ N s m⁻⁴.     

Synthesis and characterization of CdS quantum dots with carboxylic-functionalized poly (vinyl alcohol) for bioconjugation

In the present research it is reported the synthesis and characterization of CdS nanoparticles (NPs) prepared using carboxylic-functionalized poly (vinyl alcohol) (PVA) as the ligand via aqueous route at room temperature and ambient pressure. Different molar concentrations of carboxylic-PVA and PVA were investigated aiming at producing stable colloidal systems. Carboxylic-PVA was conjugated with BSA (bovine serum albumin) and used as capping ligand in the preparation of CdS nanocrystals. UV-visible spectroscopy, photoluminescence spectroscopy, and transmission electron microscopy were used to characterize the kinetics and the relative stability of polymer-capped CdS nanocrystals. The results have clearly indicated that the carboxylic-functionalized PVA was much more effective on nucleating and stabilizing colloidal CdS nanoparticles in aqueous suspensions compared to PVA. In addition, the CdS nanocrystals were obtained in the so-called “quantum-size confinement regime”, with the calculated average size below 4.0 nm and fluorescent activity. Thus, a novel simple route was successfully developed for synthesizing nanohybrids based on quantum dots and water-soluble chemically functionalized polymers with incorporated carboxylic moiety with the possibility of direct bioconjugation.     

Miscibility and interactions in poly(methylthiomethyl methacrylate)/poly(vinyl alcohol) blends

Poly(methylthiomethyl methacrylate) (PMTMA) is miscible with poly(vinyl alcohol) (PVA) over the whole composition range as shown by the existence of a single glass transition temperature in each blend. The interaction between PMTMA and PVA was examined by Fourier transform infrared spectroscopy, solid-state nuclear magnetic resonance spectroscopy and X-ray photoelectron spectroscopy. The interactions mainly involve the hydroxyl groups of PVA and the thioether sulfur atoms of PMTMA, and the involvement of the carbonyl groups of PMTMA in interactions is not significant. The measurements of proton spin-lattice relaxation time reveal that PMTMA and PVA do not mix intimately on a scale of 1-3 nm, but are miscible on a scale of 20-30 nm. In comparison, we have previously found that PMTMA is miscible with poly(p-vinylphenol) and the two polymers mix intimately on a scale of 1-3 nm.     

Synthesis of poly(vinyl alcohol) combs via MADIX/RAFT polymerization

Poly(vinyl acetate) combs have been prepared via macromolecular design via interchange of xanthate (MADIX)/reversible addition-fragmentation chain-transfer (RAFT) polymerization using xanthate functionalized polymer cores. The comb backbones were prepared using well-defined poly(vinyl alcohol) PVA polymers with a degree of polymerization of 20, 100 and 170, respectively. Functionalization with xanthates via R-group or a Z-group approach resulted in the formation of macromolecular MADIX agents. While Z group designed macromolecular xanthate agents appeared to inhibit the polymerization of vinyl acetate (VAc), R group designed macromolecular xanthate agents achieved to mediate efficiently the bulk polymerization of VAc affording PVAc combs. However, the growth of the combs was accompanied at low conversions by the formation of linear polymer chains as a result of the constant initiation (AIBN) and shoulders, which can be attributed to intermolecular coupling reactions. The proportions of single chains and termination products were observed to increase with the degree of polymerization of the macromolecular MADIX agents broadening the molecular weight distribution. As a result of a stable ester link between the branches and the PVA backbone, the branched PVAc architectures were finally hydrolyzed to afford poly(vinyl alcohol) combs.     

Water sorption in cross-linked poly(vinyl alcohol) networks

Poly(vinyl alcohol) (PVA) networks of different cross-linking densities were prepared by reaction with hexamethylene diisocyanate in solution and casting. The dynamic-mechanical properties of PVA films have been investigated in the temperature range of −150 to +150 °C. Two relaxations processes labeled α and β in order of decreasing temperature were observed. The α-relaxation shifts to lower temperature and the average molecular weight between cross-links decreases with increasing cross-linking density. Isothermal sorption from vapor and liquid water allowed determination of the Flory-Huggins interaction parameter between water and the polymer chain segments, which decreased with the water activity in the hydrogel and increased with the cross-linking density as a consequence of the hydrophobic character of the cross-linking agent. The water diffusion coefficients, D, in the networks obtained by means of dynamic sorption experiments increased with increasing water activity. This behavior is interpreted in terms of plasticization of the polymer by water molecules.     

Swelling and morphological properties of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) hydrogels in solution with high salt concentration

Understanding the swelling properties of hydrogels and how they affect the hydrogel's morphology is of fundamental importance in the development of hydrogel-based artificial muscles, bio-actuators, sensors and other devices. In this paper, the swelling behavior of PVA-PAA hydrogel films in saline water and in buffer solutions of different pH values was investigated. It was observed that the swelling factor of the hydrogel decreases when the ionic strength of the solvent solution increases. Scanning Electron Microscopy (SEM) revealed structures with different pore shapes and sizes depending on the type of solution used for hydration. In saline water, Energy Dispersive X-Ray (EDS) analysis indicated the formation of NaCl crystals within the polymeric network. Finally, the PVA-PAA hydrogel was used as an actuator to strain a fiber Bragg grating sensor, thus providing an indirect measurement of the pH value of the surrounding solution.     

Microstructural studies on BaCl2 doped poly(vinyl alcohol)

We have studied the effect of BaCl₂ dopant on the optical and microstructural properties of a polymer poly(vinyl alcohol) (PVA). Pure and BaCl₂ doped PVA films were prepared using solvent casting method. These films were characterized using FTIR, UV-visible, XRD and DSC techniques. The observed peaks around 3425 cm⁻¹, at 1733 cm⁻¹ and 1640 cm⁻¹ in the FTIR spectra were assigned to O-H, CC stretching and acetyle CO group vibrations, respectively. In the doped PVA shift in these bands can be understood on the basis of intra/inter molecular hydrogen bonding with the adjacent OH group of PVA. The UV-visible spectra shows the absorption bands around 196 nm and shoulders around 208 nm with different absorption intensities for doped PVA, which are assigned to n→π* transition. This indicates the presence of unsaturated bonds mainly in the tail-head of the polymer. Optical band energy gap is estimated using UV-visible spectra and it decreases with increasing dopant concentration. The powder XRD shows an increase in crystallinity in the doped PVA, which arises due to the interaction of dopant with PVA causing a molecular rearrangement within the amorphous phase of polymer. These modifications also influence the optical property of the doped polymer. The DSC study also supports increasing crystalline thickness and degree of crystallinity due to doping.     

Synthesis and Characterization of Poly(vinyl alcohol)/Poly(vinyl pyrrolidone)-Iodine Nanofibers with Poloxamer 188 and Chitosan

This study focuses on the fabrication of poly(vinyl alcohol)/ poly(vinyl pyrrolidone)-Iodine nanofibers via electrospinning. Electrospun fibers were characterized by FT-IR, DSC and SEM techniques. DSC results indicated that the thermal stability of nanofibers were improved after the addition of chitosan and poloxamer 188. SEM images showed that the spongiform structure is much more compact and fibrous in the case of added chitosan, with an average fiber diameter of 374 nm, whereas the addition of poloxamer 188 resulted in a more porous and beaded composition, with average fiber diameter of 489 nm.     

Transition of hydration states of poly(vinyl alcohol) in aqueous solution

A straightforward method for determination of the hydration number of polymer in aqueous solution based on ice-melting technique of DSC is proposed. The simple yet precise method has been applied to determine the hydration number of poly(vinyl alcohol) (PVA) in aqueous solution covering a wide range of concentrations, from 0.005 to 0.3 g(solute)/g(solution), for three samples with different molar masses. The hydration number of PVA maintains a constant lower value of 2.5 when the concentration exceeds 0.2 g(solute)/g(solution). It increases to a value of 7 when the concentration decreases to the overlap concentration C^∗ of the polymer, where C^∗ was estimated as the reciprocal of its intrinsic viscosity. For solutions of C < C^∗, the hydration number keeps constant again at the value of 7. This behavior evidently demonstrates that PVA has two hydration states, one occurs at the dilute regime and the other occurs at concentrated regime. The concentration dependent transition from one state to another is treated mathematically by a quantitative formula which involves two parameters: one denotes the transition concentration and the other denotes the width of the transition region. The transition concentration decreases linearly with increasing molar mass resembling the behavior of molar mass dependence of overlap concentration. The structural features for the two states of hydrated PVA are briefly discussed.     

Single wall carbon nanotube templated oriented crystallization of poly(vinyl alcohol)

Shearing of poly(vinyl alcohol) (PVA)/single wall carbon nanotube (SWNT) dispersions result in the formation of self-assembled oriented PVA/SWNT fibers or ribbons, while PVA solution results in the formation of unoriented fibers. Diameter/width and length of these self-assembled fibers was 5-45 μm and 0.5-3 mm, respectively. High-resolution transmission electron micrographs showed well resolved PVA (200) lattice with molecules oriented parallel to the nanotube axis. Nanotube orientation in the self-assembled fibers was also determined from Raman spectroscopy. PVA fibers exhibited about 48% crystallinity, while crystallinity in PVA/SWNT fibers was 84% as determined by wide angle X-ray diffraction. PVA and carbon nanotubes were at an angle of 25-40° to the self-assembled fiber axis. In comparison to PVA, PVA/SWNT samples exhibited significantly enhanced electron beam radiation resistance. This study shows that single wall carbon nanotubes not only nucleate polymer crystallization, but also act as a template for polymer orientation.     

Synthesis and characterization of conducting copolymers of poly(vinyl alcohol) with thiophene side‐groups and pyrrole

Graft copolymers of poly(vinyl alcohol) with thiophene side‐groups and pyrrole were synthesized by electrochemical polymerization methods. Poly(vinyl alcohol) with thiophene side‐groups (PVATh) was obtained from the reaction between poly(vinyl alcohol) (PVA) and thiophene‐3‐acetic acid. The syntheses of copolymers of PVATh and pyrrole were achieved electrochemically by using three different supporting electrolytes, p‐toluene sulfonic acid (PTSA), sodium dodecyl sulfate (SDS) and tetrabutylammonium tetrafluoroborate (TBAFB). Characterization of PVATh and graft copolymers was performed by a combination of techniques including cyclic voltammetry, scanning electron microscopy, thermal gravimetry, differential scanning calorimetry, size‐exclusion chromatography, ¹H NMR and FT‐IR. The conductivities were measured by the four‐probe technique. Copyright © 2004 Society of Chemical Industry     

Investigation of the relationships between the chain organization and rheological properties of atactic poly(vinyl alcohol) hydrogels

The structure and rheological behavior of atactic poly(vinyl alcohol) (a-PVA) hydrogels prepared by freeze/thaw cycles were investigated as a function of polymer concentration and number of freeze/thaw cycles. The presence of phases with different mobilities was observed using ¹³C CP/MAS and DP/MAS NMR experiments. The degree of crystallinity of the a-PVA-rich phase was determined by ¹H NMR free decay experiments. Measurements of the shear storage and loss modulus were performed at a fixed frequency of 1 Hz and a strain value of 0.1%, i.e. under conditions where the deformation imposed on the gel structure is entirely reversible. Results thus obtained showed that an increase in the number of freeze/thaw cycles induces an increase in the degree of crystallinity in the polymer-rich phase together with an increase in the storage modulus. The a-PVA hydrogels became more fragile as the number of freeze/thaw cycles was increased. Moreover, both the percentage of protons in a rigid environment measured by ¹H NMR and the storage modulus values tended to a limiting value after six freeze/thaw cycles. These results show that the first five or six freeze/thaw cycles play a very important role in determining the hydrogel structure and rheological properties. A more detailed comparison of NMR and rheological data led to the conclusion that the storage modulus is mainly controlled by the a-PVA crystallinity while the hydrogen bond interactions have a much smaller contribution.     

Poly(vinyl alcohol) hydrogel fixation on poly(ethylene terephthalate) surface for biomedical application

A surface modification technique was developed for the covalent immobilization of poly(vinyl alcohol) (PVA) hydrogel onto poly(ethylene terephthalate) (PET) to improve the biocompatibility of the film. The PET film was first graft copolymerized with poly(ethylene glycol) monomethacrylate (PEGMA) in the presence of ethylene glycol dimethacrylate (EGDMA) as crosslinker, and then oxidized with a mixture of acetic anhydride (Ac₂O) and dimethyl sulfoxide (DMSO) to produce aldehyde groups on the PET surface. Finally, the prepared PVA solution was cast onto the film and covalently immobilized on the film through the reaction between the aldehyde groups on the PET film and the hydroxyl groups of PVA. The good attachment of the PVA layer to the PET film was confirmed by observing the cross-section of the PET-PVA film using scanning electron microscopy (SEM). Heparin was immobilized on the PVA layered PET using two different methods, physical entrapment and covalent bonding, to further improve the biocompatibility of the film. Attenuated total reflectance (ATR) FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS) were used to characterize the chemical composition of the surface modified films. The biocompatibility of the various surface modified PET films was evaluated using plasma recalcification time (PRT) and platelet adhesion.     

A novel biodegradable poly(p-dioxanone)-grafted poly(vinyl alcohol) copolymer with a controllable in vitro degradation

A novel biodegradable copolymer was synthesized from poly(vinyl alcohol) and poly(p-dioxanone) by ring-opening polymerization. The molecular structure of the copolymer was characterized by one- and two-dimensional NMR spectroscopy. The results of differential scanning calorimetry (DSC) show that the amphiphilic and comb grafted structure of the copolymer make its crystalline behavior different from that of the poly(p-dioxanone) homopolymer (PPDO). The in vitro degradation rate of the copolymers can be controlled via adjusting the number and length of PPDO segments of PVA-g-PPDO copolymers. The copolymer has a potential application in biomedical materials or in the controlled release of drug.     

Accelerated biodegradation of poly(vinyl alcohol) by a glycosidation of the hydroxyl groups

Biodegradability of N-acetyl-d-glucosamine (GlcNAc)-substituted poly(vinyl alcohol) (PVA) (1) in a soil suspension (pH 6.5) was investigated at 25°C for 40 days. Biochemical oxygen demand (BOD) of 1 with degree of substitution of 0.2-0.3 (DP=430-480) was higher than that of PVA under the degradation condition. Size exclusion chromatography (SEC), ¹H NMR, and FT-IR measurements of the recovered sample indicated that biodegradation of PVA main chain was accelerated by partial glycosidation of hydroxyl groups in PVA.