Swelling and mechanical properties of crosslinked hydrogels containing N-vinylpyrrolidone

Copolymers of 2-hydroxyethyl methacrylate/N-vinyl-2-pyrrolidone (HEMA/NVP) and methyl methacrylate (MMA)/NVP were prepared in the presence of varying amounts of ethylene glycol dimethacrylate (EGDMA) and methylene diacrylamide (MDA) as crosslinkers by photopolymerisation. The resultant solid polymers were swollen to equilibrium in water at 293 K to produce hydrogels. These hydrogels were characterised by soluble fraction and equilibrium water content. The gels were also characterised by compression—strain measurements, which enabled the calculation of Young's modulus and effective crosslink density. The differences in these properties of HEMA/NVP and MMA/NVP polymer series and the effects of MDA versus EGDMA as a crosslinker were explained in terms of compositional drift of polymerisation, heterogeneous crosslinking and hydrophilicity/hydrophobicity of the components involved. In comparison with EGDMA, MDA was found to be more effective in reducing the soluble fraction of the polymers studied and to produce less rigid networks when swollen.     

Nanofiltration membranes prepared by direct microemulsion copolymerization using poly(ethylene oxide) macromonomer as a polymerizable surfactant

A novel polymer membrane with nanosized pore structures has been prepared from the direct copolymerization of acrylonitrile (AN) with a polymerizable nonionic surfactant in water‐in‐oil (w/o) or bicontinuous microemulsions. This polymerizable surfactant is ω‐methoxy poly(ethylene oxide)₄₀ undecyl‐α‐methacrylate macromonomer [CH₃O (CH₂CH₂O)₄₀ (CH₂)₁₁ OCO(CH₃)CCH₂, abbreviated: C₁‐PEO‐C₁₁‐MA‐40]. Besides PEO macromonomer, AN, and crosslinker ethyleneglycol dimethacrylate, the microemulsion system contained varying amount of water that formed w/o microemulsions having water droplet structures and bicontinuous microemulsions consisting of interconnected water channel. The polymerized membranes prepared in this study have pore radii ranging from 0.38 to 2.4 nm as evaluated by PEG filtration. The pore size appears to vary linearly with water content in precursor microemulsions. But a sharp change in the gradient of the linear relationship is observed around 25 wt % water content. Membranes made from bicontinuous (>25 wt % water) microemulsion polymerization have a larger and interconnected (open‐cell) nanostructures. In contrast, much smaller closed‐cell (disinterconnected) nanostructures were obtained from w/o (<25 wt % water) microemulsion polymerization and the membrane exhibited a permselectivity toward water in pervaporation separation of high ethanol (>50 wt %) aqueous solutions. The separation factor (α) for 95% ethanol aqueous solution by the membrane derived from the microemulsion containing 10 wt % water is about 20. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2785–2794, 2000     

Main-chain sulphur containing water soluble poly(N-isopropylacrylamide-co-N,N′-dimethylacrylamide sulphide) copolymers via interfacial polycondensation

Here, we report the first synthesis of water soluble poly(N-isopropylacrylamide-co-N,N′-dimethylacrylamide sulfide) copolymers via conventional interfacial polycondensation method using phase transfer catalyst (PTC). The effect of various kinds of PTC having different aliphatic chain length and counter ion were employed to examine the kinetics of polysulfide polymer formation. The reactivity ratios, determined employing extended Kelene–Tüdös method using feed composition obtained from ¹H NMR analysis, suggest that N-isopropylacrylamide (NIPAM) is more reactive than N,N′-dimethylacrylamide (DMA) in both mono- and di-sulfide polymers. Thermal transition behavior investigated by differential scanning calorimetry (DSC) demonstrated that as the sulphur rank of the sulfide main chain linkages increased, the flexibility of the polymers increased reflected by lower glass transition temperature (T_g) values. The thermal degradation behavior and the major degradation products have been characterized by thermogravimetric analysis (TGA) and electron-impact mass spectroscopy (EI-MS), respectively. Both the studies reveal that the degradation takes place due to weak-link scission of the polymeric main chain. Solubility in water and in most of the common organic solvents even after the sulphur rank increased from 1 to 2 in the main chain, is expected to render potential applications in biological field as well as in industry for these interesting new class of polymers.     

Solubilities and diffusivities of water vapor in poly(methylmethacrylate), poly(2-hydroxyethylmethacrylate), poly(N-vinyl-2-pyrrolidone) and poly(acrylonitrile)

Sorption and diffusion data were obtained for water vapor in four different polymers: poly (methylmethacrylate) (PMMA), poly (2-hydroxyethylmethacrylate) (PHEMA), poly (N-vinyl-2-pyrrolidone) (PVP) and poly (acrylonitrile) (PAN) at 35 °C using a gravimetric sorption method. Highest sorption was for PVP, followed by PHEMA. PMMA and PAN sorbed very little water. All the polymers exhibit a BET type III sorption isotherm; the large upturn at high activity for PVP and PHEMA is probably due to plasticization of the polymers by water vapor. Sorption data were interpreted using Flory-Huggins theory and the Zimm and Lundberg cluster integral.Fickian diffusion is observed for PHEMA. For PVP, the fractional uptake M_t/M_∞ is linear with the square root of the time up to M_t/M_∞=0.6−0.8 for all water activities a_w, but it shows a clear water sorption overshoot at a_w=55.3% and a_w=72.1%, probably due to macromolecular relaxation. PMMA sorption kinetics is also characterized by a maximum in the water uptake. The diffusion coefficient increases significantly with water concentration for PVP and PHEMA, weakly for PMMA, but it is independent of concentration for PAN.     

Determination of reactivity ratios and swelling characteristics of ‘stimuli’ responsive copolymers of N-acryloyl-N′-ethyl piperazine and MMA

‘Stimuli’ responsive copolymers of N-acryloyl-N′-ethyl piperazine (AcrNEP) and methyl methacrylate (MMA) were synthesized by free radical solution polymerization. The copolymers were analyzed as thin films by FTIR spectroscopy. The monomer reactivity ratios were determined by linearization methods of Fineman-Ross (F-R) and Kelen-Tüdös (K-T) giving the results r₁ (AcrNEP)=0.58 and r₂ (MMA)=0.91 by the F-R method and r₁=0.72 and r₂=1.08 by the K-T method. The latter r values in turn yielded Q=0.59 and e=−0.12 for AcrNEP. Crosslinked copolymer hydrogels of AcrNEP and MMA with various compositions were prepared in bulk and solution by photo-initiated free-radical polymerization. The gels were dual responsive to pH and temperature. The response to pH was reversible with a response time of 100 min with good reversibility and with no loss in swelling capacity. Water sorption of the gels was investigated gravimetrically and the collective diffusion coefficients were determined at 10, 25, and 50 °C. The water sorption of the gels in water was Fickian. The temperature dependence of the equilibrium water content was studied by the Gibbs-Helmholtz equation. The enthalpy of mixing decreased with an increase in the hydrophilic content (AcrNEP) of the gel. Other parameters such as type and amount of crosslinker, preparative conditions, nature of buffers, and salts were found to influence the swelling behavior.     

Differential microemulsion polymerization as a new root for entrapment of drugs

Nanosized particles derived from poly(methyl methacrylate) as well as copolymer of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) were synthesized by differential microemulsion technique in the presence of ammonium persulfate as water‐soluble initiator. The polymerization was stabilized by adding biologically safe emulsifiers namely the sodium dodecyl sulfate (SDS) or polyvinyl pyrrolidone (PVP) either alone or in conjunction with polyethylene glycol. The turbidity measurements, surface tension, ζ potential, and morphological characterizations of the obtained nanosized poly MMA and its copolymer with HEMA in different monomer feed compositions were investigated. It is found that increasing HEMA content leads to increase in the particle size, turbidity measurements but the negatively charged ζ potential decreased. However, when SDS is used, the surface tension of the prepared lattices increased, whereas it is decreased by using PVP. Kinetic studies of (MMA/HEMA) in ratio of 95/5 wt % in the presence of SDS or PVP revealed that the emulsifier concentration has a considerable effect on the rate of polymerization and the power of the emulsifier. The entrapment of drug was investigated using two active molecules different in water solubility (sodium warfarin and ibuprofen). It is noted that entrapment efficiency is independent of HEMA content in the monomer feed composition but dependent on type of drug and the amount of drug introduced. Hence, higher entrapment efficiency was attained for sodium warfarin (more hydrophilic) than that of ibuprofen (more hydrophobic) and they were 95.5 and 85%, respectively. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Electrochemical homolytic and heterolytic coupling of activated olefins in the absence and presence of benzyl bromide in microemulsion

Electrochemical reduction of four activated olefins namely cyclohexenone (CH), cyclopentenone (CP), methylmethacrylate (MMA), acrylonitrile (AN) in the absence and presence of benzylbromide (BBr) were investigated in CTAB/n-hexane/n-butanol/water based bicontinuous microemulsion (μE). Both cyclic voltammetric studies and galvanostatic preparative electrolysis were carried out. Cyclic voltammetric results in μE were also compared with those in N,N-dimehtylformamide (DMF) medium. Adsorption effects are observed both in DMF and μE. AN undergoes one electron reduction in aprotic solvent and two electron reduction in μE. CH, CP, BBr undergo one electron reduction and yield significant homolytic coupled products under galvanostatic conditions. AN and MMA lead to two electron reduction under identical conditions. In the presence of BBr, CH and CP alone yield significant heterolytic coupled products with simultaneous competitive resin formation. Reduction of AN leads to the formation of a identifiable quantity of propylamine and 3-phenylpropylamine in the absence and in the presence of BBr, respectively.     

A unique phase behavior of random copolymer of N-isopropylacrylamide and N,N-diethylacrylamide in water

Thermosensitive phase separation of aqueous solutions of the random copolymers of N-isopropylacrylamide (iPA) and N,N-diethylacrylamide (dEA) (PiPA-dEA) and of iPA and N-isopropylmethacrylamide(iPMA) (PiPA-iPMA) with different compositions has been investigated by using calorimetry, turbidimetry and infrared spectroscopy. Though the phase transition temperature (T_p) of PiPA-iPMA is a linear function of its composition, a deviation from additivity is observed for that of PiPA-dEA, that is, it has a minimum value at iPA/dEA = 1 (mol/mol). IR spectrum at the amide II mode of the copolymer suggests that part of N-H groups of iPA units form a hydrogen bond with CO groups of dEA units at T > T_p as well as with those of the iPA units. Effects of methanol on T_p of these copolymers have also been studied.     

Effect of composition and stereoregularity on phase-transition behavior of aqueous N-ethylacrylamide/N-n-propylacrylamide copolymer solutions

Radical copolymerizations of N-ethylacrylamide and N-n-propylacrylamide (NNPAAm) at various ratios were carried out at −40 °C, in toluene in the presence of 3-methyl-3-pentanol, or in N-ethylacetamide. Syndiotactic-rich copolymers with racemo diad contents of 67.1–70.2%, and isotactic-rich copolymers with meso diad contents of 60.9–64.5% were prepared. Syndiotactic-rich copolymers with NNPAAm compositions of ≥92.9 mol% exhibited large hystereses in the phase-transition temperatures of their aqueous solutions. Isotactic-rich copolymers with NNPAAm compositions of 39.2–67.6 mol% exhibited large hystereses in the phase-transition temperatures of their aqueous solutions. Those of composition >67.6 mol% were insoluble in water. Stereosequence analysis suggested that isotactic sequences favored intramolecular hydrogen bonding between contiguous NNPAAm units, more than syndiotactic sequences. Enhanced intramolecular hydrogen bonding in isotactic sequences was responsible for the large hystereses and insolubility of isotactic-rich copolymers with high NNPAAm compositions.     

Design and synthesis of superabsorbent polymers

A series of novel copolymer superabsorbents based on the monomers acrylamide (AM), acrylic acid (AA), acrylonitrile, methacrylic acid, sodium acrylate (SA), and 2‐hydroxyethyl methacrylate (HEMA) were prepared by copolymerization using ammonium persulfate as an initiator and N,N‐methylenebisacrylamide as a crosslinking agent. The experimental results of superabsorbent polymers (SAPs) show that the absorbency in water and NaCl solutions is maximum for AM, SA, HEMA and AM, AA, SA combinations. The copolymers were characterized by IR spectroscopy. The water retention of soil was also enhanced using the above superabsorbents. Use of SAPs for the growth of the croton plant was also investigated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2635–2639, 2001     

Synthesis and polymerization of a new iodine‐containing monomer

A new iodine‐containing methacrylate monomer, 3,4,5‐triiodobenzoyloxyethyl methacrylate (TIBEM), was synthesized by coupling 2‐hydroxyethyl methacrylate (HEMA) with 3,4,5‐triiodobenzoic acid. The monomer was characterized by ¹H nuclear magnetic resonance, infrared (IR), and ultraviolet spectra. Homopolymerization and copolymerization of the monomer with methyl methacrylate (MMA) were carried out using 2,2′‐azobis isobutyronitrile as the initiator. A terpolymer of TIBEM, MMA, and HEMA was also synthesized. The copolymers were characterized by IR, gel permeation chromatography, differential thermal analysis, and thermogravimetric analysis (TGA). High molecular weight polymers were produced with MMA at different feed compositions of TIBEM. The polymers were found to be freely soluble in common solvents for acrylic polymers. TGA showed little decomposition of the copolymer below 280°C. Copolymers showed good radiopacity at 25 wt % of TIBEM in the feed. These copolymers could find applications in medical and dental areas where radiopacity is a desirable feature of the implants. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2580–2584, 2003     

Copolymers of N-alkylacrylamides and styrene as new thermosensitive materials

New thermosensitive copolymers were obtained by copolymerization of styrene with N-methylacrylamide, N-ethylacrylamide or N,N-dimethylacrylamide. The turbidity measurements showed that these polymers can undergo a thermally induced phase transition at various temperatures, depending on their chemical composition, molecular weight and concentration in water. Fluorescence measurements indicated the occurrence of aggregation through hydrophobic interactions even below the lower critical solution temperature. The enthalpy and cooperativity of phase transition determined by microcalorimetry were strongly dependent on the chemical structure of the N-alkylacrylamide comonomer.     

Phase behavior of a sodium dodecanol allyl sulfosuccinic diester/n‐pentanol/methyl acrylate/butyl acrylate/water microemulsion system and preparation of acrylate latexes by microemulsion polymerization

Pseudoternary phase diagrams of quaternary microemulsion systems composed of the reactive surfactant sodium dodecanol allyl sulfosuccinic diester, n‐pentanol, methyl acrylate/butyl acrylate, and water were made. The influence of the mass ratio of sodium dodecanol allyl sulfosuccinic diester to the cosurfactant (n‐pentanol) in the system and the influence of electrolyte sodium chloride on the microemulsion area were examined. The microstructure of the microemulsion was determined with a conductance technique. The results suggested that there were three structures in the microemulsion system: water in oil, oil in water, and a bicontinuous phase. Microemulsion polymerizations were carried with some point in the microemulsion region being chosen as the formulation. The structure and configuration of the polymer latexes were determined and analyzed with Fourier transform infrared, differential scanning calorimetry, and scanning electron microscopy. The results suggested that the reactive surfactant could participate in the polymerization with the monomers to some extent; the glass‐transition temperature of the latex was ?31.4°C. The polymer latex was transformed gradually from an open porous structure to a closed porous structure when its pregnant microemulsion was varied from a bicontinuous structure to an oil‐in‐water structure. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Degradation and geometric isomerization of poly(N-propargylamides)

The stability of several poly(N-propargylamides) was investigated in solution and in solid state on the basis of molecular weight change with time, and further their thermal stability was investigated by TGA. When the stability of poly(N-propargylamides) with varying pendent groups was compared, polymers with pendent groups of moderate size showed the highest stability in solution. Too short and too bulky pendent groups were not favorable for the stability of polymers. When poly(N-propargylheptanamide) (poly(6)) was stored in THF as solution at −20 °C in the absence of oxygen in dark, its degradation rate was the lowest. The degradation rate of poly(6) depended on the solvents used, which may be related to different solubility of oxygen in these solvents. Polymers with high cis contents degraded faster than polymers with low cis contents did. Addition of TEMPO and DPPH into the poly(6)/THF solution more or less depressed the degradation of poly(6). The degradation of polymer main chain in solution was always accompanied by the decrease of cis content, i.e. geometric isomerization from cis- to trans-structure. When the polymers were stored in the solid state at −20 °C, the polymers having alkyl pendent groups with moderate length were more stable than those with bulky pendent groups. Geometric isomerization occurred along with degradation in the solid state as well.     

Electropolymerization and electrochemical properties of (N-hydroxyalkyl)pyrrole/pyrrole copolymers

In this study, the N-hydroxyalkyl derivatives of pyrrole (Py), N-(2-hydroxyethyl)pyrrole (HE) and N-(3-hydroxypropyl)pyrrole (HP), were synthesized. The corresponding homopolymers, PHE and PHP, together with the copolymers of Py/HE and those of Py/HP were prepared by galvanostatic polymerization. These monomers and polymers were characterized by FTIR spectroscopy, elemental analysis, SEM and electrochemical techniques. The result of potential-time profiles showed that a higher potential was required for HE and HP than Py for the polymerization. This was ascribed to the steric hindrance of high concentration of the N-hydroxyalkyl groups. However, a similar potential was observed for the copolymerization of Py/HE and Py/HP systems as that of Py due to the reduction of the steric effect by lower content of the substituent. The SEM micrographs showed a rougher morphology for the films synthesized from the solutions with higher Py/derivatives ratio. The cyclic voltammograms indicated that all the copolymers were larger, while the homopolymers had smaller anodic/cathodic currents and specific charges than PPy. This implied that the existence of the proper amount of the N-hydroxyalkyl pendant groups enhanced the ionic mobility of the pyrrole polymers. The results of charge/discharge measurements showed that the copolymer PYHP82 has the highest discharge capacity among the pyrrole polymers prepared.     

pH‐sensitive acrylic‐based copolymeric hydrogels for the controlled release of a pesticide and a micronutrient

Acrylic‐based copolymers of methyl methacrylate (MMA) and methacrylic acid (MAA) have been prepared by solution and bulk polymerization techniques using benzoyl peroxide (BPO) as an initiator. Three polymers were prepared with a varying ratio of MMA/MAA. In an effort to increase the hydrophilicity of the matrix, one MMA/MAA polymer was prepared by adding an additional amount of 2‐hydroxy ethyl methacrylate (HEMA). All the polymers were crosslinked in situ by ethylene glycol dimethacrylate (EGDMA). These polymers were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. Viscous flow characteristics were determined from solution viscosity and rheological measurements. Dynamic and equilibrium swelling experiments were carried out under varying pH conditions (i.e., 0.1N NaOH, 0.1N HCl, and double‐distilled water). Partially crosslinked hydrogels show varying hydrophilicity because of the presence of carboxylic acid groups making them pH‐responsive. Swelling increased with an increasing number of —COOH groups on the polymer backbone and the hydrophilicity varied with changing pH. Cypermethrin, a widely used pesticide, and cupric sulfate, a model micronutrient, were loaded into these pH‐sensitive hydrogels to investigate their controlled release characteristics. The in vitro release rates of both compounds have been carried out under static dissolution conditions at 30°C. Release data have been fitted to an empirical relation to estimate transport parameters. The release results have been discussed in terms of the varying hydrophilicity of the hydrogel network polymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 394–403, 2003     

Synthesis and characterization of poly(HEMA‐co‐MMA)‐g‐POSS nanocomposites by combination of reversible addition fragmentation chain transfer polymerization and click chemistry

New hybrid poly(hydroxyethyl methacrylate‐co‐methyl methacrylate)‐g‐polyhedral oligosilsesquioxane [poly(HEMA‐co‐MMA)‐g‐POSS] nanocomposites were synthesized by the combination of reversible addition fragmentation chain transfer (RAFT) polymerization and click chemistry using a grafting to protocol. Initially, the random copolymer poly(HEMA‐co‐MMA) was prepared by RAFT polymerization of HEMA and MMA. Alkynyl side groups were introduced onto the polymeric backbones by esterification reaction between 4‐pentynoic acid and the hydroxyl groups on poly(HEMA‐co‐MMA). Azide‐substituted POSS (POSS? N₃) was prepared by the reaction of chloropropyl‐heptaisobutyl‐substituted POSS with NaN₃. The click reaction of poly(HEMA‐co‐MMA)‐alkyne and POSS? N₃ using CuBr/PMDEATA as a catalyst afforded poly(HEMA‐co‐MMA)‐g‐POSS. The structure of the organic/inorganic hybrid material was investigated by Fourier transformed infrared, ¹H‐NMR, and ²⁹Si‐NMR. The elemental mapping analysis of the hybrid using X‐ray photoelectron spectroscopy and EDX also suggest the formation of poly(HEMA‐co‐MMA)‐anchored POSS nanocomposites. The XRD spectrum of the nanocomposites gives evidence that the incorporation of POSS moiety leads to a hybrid physical structure. The morphological feature of the hybrid nanocomposites as captured by field emission scanning electron microscopy and transmission electron microscopic analyses indicate that a thick layer of polymer brushes was immobilized on the POSS cubic nanostructures. The gel permeation chromatography analysis of poly(HEMA‐co‐MMA) and poly(HEMA‐co‐MMA)‐g‐POSS further suggests the preparation of nanocomposites by the combination of RAFT and click chemistry. The thermogravimetric analysis revealed that the thermal property of the poly(HEMA‐co‐MMA) copolymer was significantly improved by the inclusion of POSS in the copolymer matrix. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of well‐defined comb‐like amphiphilic copolymers with protonizable units in the pendent chains: 1. Preparation of narrow polydispersity copolymers of methyl methacrylate and 2‐hydroxyethyl methacrylate by atom‐transfer radical polymerization

Well‐defined methyl methacrylate (MMA) and 2‐(trimethylsiloxy)ethyl methacrylate (Pro‐HEMA) copolymers were prepared by atom‐transfer radical polymerization(ATRP), using CuCl/2,2′‐bipyridine as catalytic system and p‐toluenesulfonyl chloride as initiator. ATRP process of MMA and Pro‐HEMA was monitored by ¹H NMR, and the kinetic curves of the MMA/Pro‐HEMA copolymerization were plotted in terms of the ¹H NMR data. At low content of Pro‐HEMA in the feed composition, the copolymerization can be well controlled with the molecular weight, polydispersity and the monomer distribution in the copolymer chain. With the increase of Pro‐HEMA content in the feed mixture, the composition of the final copolymer deviates from the composition of the feed mixture gradually, and gradient copolymers of MMA/Pro‐HEMA can be obtained. Through the hydrolysis process, well‐defined copolymers of MMA/HEMA were obtained from poly(MMA/Pro‐HEMA). Copyright © 2003 Society of Chemical Industry     

Optically active copolymers of N-(oxazolinyl)phenylmaleimides with methyl methacrylate: Synthesis and chiral recognition ability

The free radical copolymerization of three N-phenylmaleimides bearing a chiral oxazoline residue at ortho-position of the phenyl group (OPMI) with methyl methacrylate (MMA) was carried out in tetrahydrofuran by varying the molar ratio of the comonomers. The monomer reactivity ratios and Alfrey-Price Q-e values were determined. The data revealed that the monomer OPMI has a distinct tendency to cross-propagate and MMA is inclined to block formation. Meanwhile, the MMA co-units affected significantly the chiroptical property of resulted copolymers besides endowing them with a moderate film-forming ability. Poly(OPMI-co-MMA)s coated on macroporous silica were used as a high-performance liquid chromatography chiral selector, and the optical resolution performance was briefly evaluated toward some racemic compounds including amino- and hydroxy-acids as well as 1,1′-bi-2-naphthol. The observation indicated that the column combining MeOPMI/MMA copolymers with higher chiral component exhibits an extent of enantioselectivity in both normal and reversed-phase modes.     

双连续相微乳液聚合特征与应用

讨论了双连续相微乳液的形成机理与结构模型，综述了双连续相微乳液聚合的聚合体系、聚合机理、聚合产物结构特征及性能表征，分析了影响聚合产物微观结构的因素，介绍了双连续相微乳液聚合的应用。