Architecture of rod–brush block copolymers synthesized by a combination of coordination polymerization and atom transfer radical polymerization

A combination of coordination polymerization and atom transfer radical polymerization (ATRP) was applied to a novel synthesis of rod–brush block copolymers. The procedure included the following steps: (1) the monoesterification reaction of ethylene glycol with 2-bromoisobutyryl bromide (BIBB) yielded the bifunctional initiator monobromobutyryloxy ethylene glycol and (2) a trichlorocyclopentadienyl titanium (CpTiCl₃; bifunctional initiator) catalyst was prepared from a mixture of CpTiCl₃ and bifunctional initiator. The coordination polymerization of n-butyl isocyanate initiated by such a catalyst provided a well-defined macroinitiator, poly(n-butyl isocyanate)–bromine (PBIC–Br). (3) The ATRP method of 2-hydroxyethyl methacrylate initiated by PBIC–Br provided rod [poly(n-butyl isocyanate) (PBIC)]–coil [poly(2-hydroxyethyl methacrylate) (PHEMA)] block copolymers with a CuCl/CuCl₂/2,2′-bipyridyl catalyst. (4) The esterfication of PBIC-block-PHEMA with BIBB yielded a block-type macroinitiator, and (5) ATRP of methyl methacrylate with a block-type macroinitiator provided rod–brush block copolymers. We found from the solution properties that such rod–brush block copolymers formed nanostructured macromolecules in solution. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of functional poly(acrylates and methacrylates) and block copolymers formation based on polystyrene macroinitiator by ATRP

The polymerization by ATRP of hydroxy and amino functional acrylates and methacrylates with tert-butyldimethylsilyl (TBDMS) or tert-butyloxycarbonyl (BOC) protective groups has been studied for the first time achieving high control over molecular weight and polydispersity. Detailed investigation of the ATRP of 2-{[tert-butyl(dimethyl)silyl]oxy}ethyl acrylate (M2b) in bulk and 2-[(tert-butoxycarbonyl)amino]ethyl 2-methylacrylate (M3a) in diphenyl ether (DPE) showed that the type of ligand plays an important role on either the polymerization rate or the degree of control of the polymerization. Among the ligands used, N,N,N,′N″N″-pentamethyl diethylenetriamine (PMDETA) was the most suitable ligand for ATRP of all functional acrylates and methacrylates. The kinetics of M2b and M3a polymerization using PMDETA as a ligand was reported and proved the living character of the polymerization. Well-defined block copolymers based on a halogen terminated polystyrene (Pst) macroinitiator and the functional acrylate and methacrylate monomers were successfully synthesized by ATRP, and subsequent deprotection of the protective groups from the acrylate or methacrylate segment afforded amphiphilic block copolymers with a specific solubility behavior.     

Architecture of rod consisting of hyperbranched pendant chains‐coil block copolymers by ATRP approach

Atom transfer radical polymerization (ATRP) was applied to a novel synthesis of rod consisting of hyperbranched pendant chains‐coil block copolymers. The procedure included the following steps: (1) esterification reaction of poly(ethylene glycol) methyl ether (PEO) with 2‐bromoisobutyryl bromide (BIBB) yielded a PEO‐Br macroinitiator, (2) ATRP method of 2‐hydroxylethyl methacrylate (HEMA) using PEO‐Br provided PEO‐block‐poly(2‐hydroxyethyl methacrylate) (PHEMA) block copolymers, (3) esterification of PEO‐block‐PHEMA with BIBB yielded block‐type polyinitiator, and (4) ATRP of HEMA‐Br inimer using block‐type polyinitiator provided coil‐rod (consisting of hyperbranched pendant chains) block copolymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A new synthetic approach to asymmetric amphiphilic ABA′ block copolymers by ATRP and click reactions

Well‐defined asymmetric amphiphilic ABA′ block copolymers composed of poly(ethylene oxide) monomethylene ether (MPEO) with different molecular weights as A or A′ block and poly(styrene) (PS) as B block were synthesized by the combination of atom transfer radical polymerization (ATRP) and click reactions. First, bromine‐terminated diblock copolymer poly(ethylene oxide) monomethylene ether‐block‐poly(styrene) (MPEO‐PS‐Br) was prepared by ATRP of styrene initiated with macroinitiator MPEO‐Br, which was prepared from the esterification of MPEO and 2‐bromoisobutyryl bromide. Then, the azido‐terminated diblock copolymers MPEO‐PS‐N₃ were prepared through the bromine substitution reaction with sodium azide. Propargyl‐terminated MPEO with a different molecular weight was prepared under the basic condition from propargyl alcohol and p‐toluenesulfonyl‐terminated MPEO, which was prepared through the esterification of MPEO and p‐toluenesulfochloride using pyridine as solvent. Asymmetric amphiphilic ABA′ block copolymers, with a wide range of number–average molecular weights from 1.92 × 10⁴ to 2.47 × 10⁴ and a narrow polydispersity from 1.03 to 1.05, were synthesized via a click reaction of the azido‐terminated diblock copolymers and the propargyl‐terminated MPEO in the presence of CuBr and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) catalyst system. The structures of these ABA′ block copolymers and corresponding precursors were characterized by NMR, IR, and GPC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of copolymers of 5,6-benzo-2-methylene-1,3-dioxepane and n-butyl acrylate

The ATRP copolymerization of 5,6-benzo-2-methylene-1,3-dioxepane (BMDO) with n-butyl acrylate (nBA) was studied by using ethyl 2-bromoisobutyrate (EBriBu) and N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA)/Cu(I)Br as the initiator and catalyst, respectively. The reactivity ratios of the monomers in the copolymerization were determined using the Kelen-Tüdõs method and were found to be r_BMDO=0.08 and r_nBA=3.7. The copolymer yield decreased with higher amounts of BMDO in the initial feed. The structure of these copolymers was thoroughly characterized by 1D and 2D NMR techniques and quantitative ring opening of BMDO in its copolymerization was demonstrated. The hydrolytic degradation behavior of the BMDO/nBA copolymers was also studied.     

Synthesis and characterization of polyrotaxanes comprising α‐cyclodextrins and poly(ε‐caprolactone) end‐capped with poly(butyl methacrylate)s

Biodegradable polyrotaxane‐based triblock copolymers were synthesized via the bulk atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) initiated with polypseudo‐rotaxanes (PPRs) built from a distal 2‐bromoisobutyryl end‐capped poly(ε‐caprolactone) (Br‐PCL‐Br) with α‐cyclodextrins (α‐CDs) in the presence of Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 45 ºC. The structure was characterized in detail by means of ¹H NMR, gel permeation chromatography, wide‐angle X‐ray diffraction, DSC and TGA. When the feed molar ratio of BMA to Br‐PCL‐Br was changed from 128 to 300, the degree of polymerization of PBMA blocks attached to two ends of the PPRs was in the range 382 ? 803. Although about a tenth of the added α‐CDs were still threaded onto the PCL chain after the ATRP process, the movable α‐CDs made a marked contribution to the mechanical strength enhancement, blood anticoagulation activity and protein adsorption repellency of the resulting copolymers. Meanwhile, they could also protect the copolymers from the attack of H₂O and Lipase AK Amano molecules, exhibiting a lower mass loss as evidenced in hydrolytic and enzymatic degradation experiments. © 2013 Society of Chemical Industry     

Synthesis and characterization of perfluorocyclobutyl aryl ether-based amphiphilic diblock copolymer

Perfluorocyclobutyl aryl ether-based amphiphilic diblock copolymer containing hydrophilic poly(ethylene glycol) segment was synthesized by atom transfer radical polymerization (ATRP). Perfluorocyclobutyl-containing methacrylate-based monomer, 4-(4′-p-tolyloxyperfluorocyclobutoxy)benzyl methacrylate, was prepared firstly, which can be polymerized by ATRP in a controlled way to obtain well-defined homopolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.30). The molecular weights increased linearly with the conversions of monomer and the apparent polymerization rate exhibited first-order relation with respect to the concentration of monomer. ATRP of 4-(4′-p-tolyloxyperfluorocyclobutoxy)benzyl methacrylate was initiated by PEG-based macroinitiators with different molecular weights to obtain amphiphilic diblock copolymers with narrow molecular weight distributions (M_w/M_n < 1.35) and the number of perfluorocyclobutyl linkage can be tuned by the feed ratio and the conversion of the fluorine-containing methacrylate monomer. The critical micelle concentrations of these amphiphilic diblock copolymers in water and brine were determined by fluorescence probe technique. The morphologies of the micelles were found to be spheres by TEM.     

Hyperbranched homo and thermoresponsive graft copolymers by using ATRP‐macromonomer initiators

Macromonomer initiators behave as macro cross‐linkers, macro initiators, and macromonomers to obtain branched and cross‐linked block/graft copolymers. A series of new macromonomer initiators for atom transfer radical polymerization (MIM‐ATRP) based on polyethylene glycol (M_n = 495D, 2203D, and 4203D) (PEG) were synthesized by the reaction of the hydroxyl end of mono‐methacryloyl polyethylene glycol with 2‐bromo propanoyl chloride, leading to methacryloyl polyethylene glycol 2‐bromo propanoyl ester. Poly (ethylene glycol) functionalized with methacrylate at one end was reacted with 2‐bromopropionyl chloride to form a macromonomeric initiator for ATRP. ATRP was found to be a more controllable polymerization method than conventional free radical polymerization in view of fewer cross‐linked polymers and highly branched polymers produced from macromonomer initiators as well. In another scenario, ATRP of N‐isopropylacrylamide (NIPAM) was initiated by MIM‐ATRP to obtain PEG‐b‐PNIPAM branched block/graft copolymers. Thermal analysis, FTIR, ¹H NMR, TEM, and SEM techniques were used in the characterization of the products. They had a thermo‐responsive character and exhibited volume phase transition at ～ 36°C. A plasticizer effect of PEG in graft copolymers was also observed, indicating a lower glass transition temperature than that of pure PNIPAM. Homo and copolymerization kinetics were also evaluated. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Solvent induced morphologies of poly(methyl methacrylate-b-ethylene oxide-b-methyl methacrylate) triblock copolymers synthesized by atom transfer radical polymerization

Poly(methyl methacrylate-b-ethylene oxide-b-methyl methacrylate) (PMMA-PEO-PMMA) triblock copolymers were synthesized using atom transfer radical polymerization (ATRP) and halogen exchange ATRP. PEO-based macroinitiators with molecular weight from M_n = 2000 to 35,800 g/mol were used to initiate the polymerization of MMA to obtain copolymers with molecular weight up to M_n = 82,000 g/mol and polydispersity index (PDI) less than 1.2. The macroinitiators and copolymers were characterized by gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy. The melting temperature and glass transition temperature of the copolymers were measured by differential scanning calorimetry (DSC). Crystallinities of the PEO blocks were determined from the WAXS patterns of both homopolymers and block copolymers, which revealed the fragmentation of PEO blocks due to the folding of the PMMA chains. Interestingly, the fragmentation was less pronounced when cast on surfaces compared to that in bulk, as measured by GISAXS. Solvent casting was used to control the morphology of the copolymers, permitting the formation of various states including amorphous, induced micellar with a PMMA core and flower-like PEO arms, and a cross-linked gel. Atomic force microscopy (AFM) was used to visualize the different copolymer morphologies, showing micellar and amorphous states.     

Amphiphilic block copolymers bearing strong push-pull azo chromophores: Synthesis, micelle formation and photoinduced shape deformation

In this work, a series of amphiphilic diblock copolymers bearing strong push-pull type azo chromophores was synthesized through post-polymerization azo-coupling reaction scheme. The copolymers (P(CNAZO_m-b-MAA_n)), composed of 2-(N-ethyl-N-(4-(4′-cyanophenylazo)-phenyl)amino)ethyl methacrylate (CNAZO) and methacrylic acid (MAA) blocks, were obtained through four-step reactions. Firstly, precursor diblock copolymers (P(EMA_m-b-tBMA_n)) were obtained through sequential two-stage ATRP reactions of 2-(N-ethyl-N-phenylamino)ethyl methacrylate (EMA) and tert-butyl methacrylate (tBMA). Then, 4-amino-4′-cyanoazobenzene chromophores were introduced by azo-coupling reaction of P(EMA_m-b-tBMA_n) with diazonium salt of 4-aminobenzonitrile. Finally, P(CNAZO_m-b-MAA_n) was obtained through selective hydrolysis of the tert-butyl ester linkages in the tBMA blocks. Three block copolymers with the same CNAZO block length (m = 100) and different MAA block lengths (n = 5, 13, 23) were prepared by this method. The polymer and copolymers prepared in the process were characterized by GPC, ¹H NMR, UV-vis, DSC and TGA measurements. Results show that P(CNAZO_m-b-MAA_n) forms spherical micellar aggregates by gradually increasing the water content in THF/H₂O mixtures. The diameters of the spherical aggregates are related to the composition of the block copolymers and the water-adding rate. The block copolymer with larger molecular weight of the hydrophilic MAA block forms the aggregates with the smaller average size. The increase of the water-adding rate also shows an effect to reduce the diameters. Upon irradiation with a linearly polarized Ar⁺ laser beam, the spherical aggregates can be elongated in the light polarization direction. The deformation degree shows an almost linear dependence on the light irradiation time in the testing period. The deformed aggregates can recover the original spherical shape after thermal annealing at a temperature above T_g of the block copolymer.     

Synthesis of methyl methacrylate and N‐aryl itaconimide block copolymers via atom‐transfer radical polymerization

The paper describes the synthesis of block copolymers of methyl methacrylate (MMA) and N‐aryl itaconimides using atom‐transfer radical polymerization (ATRP) via a poly(methyl methacrylate)–Cl/CuBr/bipyridine initiating system or a reverse ATRP AIBN/FeCl₃·6H₂O/PPh₃ initiating system. Poly(methyl methacrylate) (PMMA) macroinitiator, ie with a chlorine chain‐end (PMMA‐Cl), having a predetermined molecular weight (M_n = 1.27 × 10⁴ g mol^?1) and narrow polydispersity index (PDI = 1.29) was prepared using AIBN/FeCl₃·6H₂O/PPh₃, which was then used to polymerize N‐aryl itaconimides. Increase in molecular weight with little effect on polydispersity was observed on polymerization of N‐aryl itaconimides using the PMMA‐Cl/CuBr/Bpy initiating system. Only oligomeric blocks of N‐aryl itaconimides could be incorporated in the PMMA backbone. High molecular weight copolymer with a narrow PDI (1.43) could be prepared using tosyl chloride (TsCl) as an initiator and CuBr/bipyridine as catalyst when a mixture of MMA and N‐(p‐chlorophenyl) itaconimide in the molar ratio of 0.83:0.17 was used. Thermal characterization was performed using differential scanning calorimetry (DSC) and dynamic thermogravimetry. DSC traces of the block copolymers showed two shifts in base‐line in some of the block copolymers; the first transition corresponds to the glass transition temperature of PMMA and second transition corresponds to the glass transition temperature of poly(N‐aryl itaconimides). A copolymer obtained by taking a mixture of monomers ie MMA:N‐(p‐chlorophenyl) itaconimide in the molar ratio of 0.83:0.17 showed a single glass transition temperature. Copyright © 2005 Society of Chemical Industry     

RAFT polymerization of temperature- and salt-responsive block copolymers as reversible hydrogels

Reversible-addition fragmentation chain transfer (RAFT) polymerization enabled the synthesis of novel, stimuli-responsive, AB and ABA block copolymers. The B block contained oligo(ethylene glycol) methyl ether methacrylate (OEG) and was permanently hydrophilic in the conditions examined. The A block consisted of diethylene glycol methyl ether methacrylate (DEG) and [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TMA). The A block displayed both salt- and temperature-response with lower critical solution temperatures (LCSTs) dependent on the molar content of TMA and the presence of salt. Higher TMA content in the AB diblock copolymers increased the critical micelle temperatures (CMT) in HPLC-grade water due to an increased hydrophilicity of the A block. Upon addition of 0.9 wt% NaCl, the CMTs of poly(OEG-b-DEG₉₅TMA₅) decreased from 50 °C to 36 °C due to screening of electrostatic repulsion between the TMA units. ABA triblock copolymers displayed excellent hydrogel properties with salt- and temperature-dependent gel points. TMA incorporation in the A block increased the gel points for all triblock copolymers, and salt-response increased with higher TMA composition in the A block. For example, poly(DEG₉₈TMA₂-b-OEG-b-DEG₉₈TMA₂) formed a hydrogel at 40 °C in HPLC-grade water and 26 °C in 0.9 wt% NaCl aqueous solution. These salt- and temperature-responsive AB diblock and ABA triblock copolymers find applications as drug delivery vehicles, adhesives, and hydrogels.     

Graft copolymers with hydrophilic and hydrophobic polyether side chains

Poly(ethylene glycol)methyl ether methacrylate (PEOMA) and oligo(propylene glycol)-4-nonylphenyl ether acrylate (OPOPhNA) were copolymerized by atom transfer radical polymerization (ATRP). Grafting through method was employed in the presence of CuBr/HMTETA or CuBr/PMDETA catalyst/ligand complex in anisole at 70 °C. It yielded a heterografted copolymers containing hydrophilic PEO and hydrophobic OPOPhNA side chains with polymerization degree DP = 68-315 in the presence of PMDETA and DP = 48-195 in the presence HMTETA. Moreover, higher reactivity of PEOMA than OPOPhNA (r_methacrylate > r_acrylate), which was observed during copolymerization, suggested the formation of copolymers with a spontaneous gradient composition starting from the grafted segment of P(PEOMA). The molecular weight distribution (MWD) was increased with DP in the range 1.2-1.6. The X-ray diffraction analysis (WAXS) indicated that larger number of PEO segments generated crystalline properties in the copolymers with amorphous OPOPhNA.     

Synthesis of Y‐shaped poly(N,N‐dimethylamino‐2‐ethyl methacrylate) and poly(trimethylene carbonate) from a new heterofunctional initiator

A new amphiphilic Y‐shaped copolymer, comprised of hydrophobic Poly(trimethylene carbonate) (PTMC) and hydrophilic Poly(N,N‐dimethylamino‐2‐ethyl methacrylate) (PDMAEMA), was designed and synthesized by a combination of atom transfer radical polymerization (ATRP) and ring‐opening polymerization (ROP) using a new heterofunctional initiator, Br‐Init‐(OH)₂, bearing one initiation site for ATRP and two for ROP. At first, a new trifunctional core molecule bearing hydroxyl group and bromine moieties, Br‐Init‐(OH)₂, was synthesized via protection followed by esterification reaction of 5‐ethyl‐5‐hydroxymethyl‐2,2‐dimethyl‐1,3‐dioxane with 2‐bromoisobutyryl bromide and deprotection. In the presence of trifunctional core molecule, Br‐Init‐(OH)₂, target Y‐shaped miktoarm star copolymers, (PTMC)₂‐ b‐PDMAEMA, were successfully synthesized by sequence conducting the ROP of TMC and ATRP of DMAEMA. The Y‐shaped copolymers were characterized by ¹H NMR and GPC measurements. Subsequently, the self‐assembly behavior of these copolymers was investigated by dynamic light scattering method and transmission electron microscopy, which indicated that these amphiphilic Y‐shaped copolymers can self‐assemble into micelles and possess distinct pH‐dependent size in aqueous milieu. The results indicate that the amphiphilic Y‐shaped copolymers had the pH‐responsive properties similar to the expected PDMAEMA. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Temperature induced micellization and aggregation of biocompatible poly (oligo(ethylene glycol)methyl ether methacrylate) block copolymer analogs in aqueous solutions

A series of well-defined block copolymers composed of di(ethylene glycol) methyl ether methacrylate (188 g/mol) and oligo(ethylene glycol) methyl ether methacrylate (300 g/mol), PMEO₂MA-b-(PMEO₂MA-stat-POEGMA₃₀₀), were successfully synthesized at room temperature via a two-step atom transfer radical polymerization (ATRP) process using 1,1,4,7,10,10-hexamethyl triethylene tetramine (HMTETA) as the ligand. The ratio of MEO₂MA/OEGMA₃₀₀ in the second block controls the thermal behaviors of these copolymers. When the ratio of MEO₂MA/OEGMA₃₀₀ is 80/20, only one thermal transition was observed. However, two thermal transitions were observed for MEO₂MA/OEGMA₃₀₀ ratios of 70/30 and 0/100. We believed that the first transition was associated with the formation of micelles and the second transition corresponded to the formation of larger aggregates consisting of several preformed micelles. This hypothesis was confirmed by light scattering, where the hydrodynamic radius (R_h) of the aggregates of 70/30 and 0/100 systems increased from 48 to 95 nm and 88 to 147 nm with a corresponding increase in the R_g/R_h from 0.76 to 1.1 and 0.68 to 1.0 respectively. TEM analyses confirmed the formation of spherical particles, where the sizes of these particles increased with increasing temperatures.     

Poly(arylene ether sulfone) multi-block copolymers bearing perfluoroalkylsulfonic acid groups

Poly(arylene ether sulfone) (PAES) multi-block copolymers bearing perfluoroalkylsulfonic acid moieties were prepared from hydrophilic and hydrophobic prepolymers. The latter were synthesized by reaction of N,N-diisopropylethylammonium 2,2-bis(p-hydroxyphenyl)pentafluoropropanesulfonate (HPPS) with bis-(4-fluorophenyl) sulfone (FPS), and biphenol (BP) with FPS, respectively. Prepolymers and multi-block copolymers were prepared at 180 °C in N,N-dimethylacetamide in the presence of K₂CO₃. The prepolymers were reacted overnight; the multi-block copolymers were reacted only 80 min to minimize transetherification. Prepolymers and multi-block copolymers were characterized using ¹H and ¹³C NMR. ¹⁹F NMR provided molecular weight of hydrophilic prepolymers bearing aryl fluoride end groups. GPC was used to characterize the multi-block copolymers. Copolymer block lengths were determined by quantifying ¹³C NMR peak areas of quaternary carbon atoms adjacent to sulfur in FPS moieties. Hydrophilic and hydrophobic block lengths were in the range 9.4-23.4 and 4.4-11.8 repeating units, respectively. AFM showed phase separation for all block lengths. Conductivity at 80 °C and 100% relative humidity ranged from 6.2 to 34.3 mS/cm, with the best value obtained for hydrophilic/hydrophobic block lengths of 13.3/6.0.     

Synthesis,characterization, and application of novel amphiphilic poly(D‐gluconamidoethyl methacrylate)‐b‐polyurethane‐b‐ poly(D‐gluconamidoethyl methacrylate) triblock copolymers

Novel amphiphilic ABA‐type poly(D ‐gluconamidoethyl methacrylate)‐b‐polyurethane‐b‐poly(D ‐gluconamidoethyl methacrylate) (PGAMA‐b‐PU‐b‐PGAMA) tri‐block copolymers were successfully synthesized via the combination of the step‐growth and copper‐catalyzed atom transfer radical polymerization (ATRP). Dihydroxy polyurethane (HO‐PU‐OH) was synthesized by the step‐growth polymerization of hexamethylene diisocyanate with poly(tetramethylene glycol). PGAMA‐b‐PU‐b‐PGAMA block copolymers were synthesized via copper‐catalyzed ATRP of GAMA in N, N‐dimethyl formamide at 20°C in the presence of 2, 2′‐bipyridyl using Br‐PU‐Br as macroinitiator and characterized by ¹H‐NMR spectroscopy and GPC. The resulting block copolymer forms spherical micelles in water as observed in TEM study, and also supported by ¹H NMR spectroscopy and light scattering. Miceller size increases with increase in hydrophilic PGAMA chain length as revealed by DLS study. The critical micellar concentration values of the resulting block copolymers increased with the increase of the chain length of the PGAMA block. Thermal properties of these block copolymers were studied by thermo‐gravimetric analysis, and differential scanning calorimetric study. Spherical Ag‐nanoparticles were successfully synthesized using these block copolymers as stabilizer. The dimension of Ag nanoparticle was tailored by altering the chain length of the hydrophilic block of the copolymer. A mechanism has been proposed for the formation of stable and regulated Ag nanoparticle using various chain length of hydrophilic PGAMA block of the tri‐block copolymer. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Sustained release of ibuprofen from polymeric micelles with a high loading capacity of ibuprofen in media simulating gastrointestinal tract fluids

Amphiphilic diblock copolymers with poly(ethylene glycol) as the hydrophilic block and a random copolymer of n-butyl methacrylate or styrene and (N,N-diethylamino)ethyl methacrylate as the hydrophobic block were prepared by atom transfer radical polymerization (ATRP). Ibuprofen, a model drug that contains a carboxylic group and hydrophobic moiety, was loaded into micelles formed from the amphiphilic diblock copolymers by a combination of ionic interaction and hydrophobic effect. The loading capacity of ibuprofen in the micelles reached 60%. Loaded ibuprofen was released in a sustained fashion into media simulating gastric fluid (pH 1.6, 2 h), small intestinal fluid (pH 7.4, 4 h), and colon fluid (pH 6.7, 18 h). Simulating the case of oral administration at 2 doses per day, loaded ibuprofen was released almost linearly against time after the second dose in media simulating human gastrointestinal tract fluids.     

The beneficial effect of small amount of water in the ambient temperature atom transfer radical homo and block co-polymerization of methacrylates

ATRP of several methacrylates viz. methyl methacrylate (MMA), ethyl methacrylate (EMA), n-butyl methacrylate (nBMA), t-butyl methacrylate (tBMA), benzyl methacrylate (BzMA) and (N,N-dimethylamino)ethyl methacrylate (DMAEMA) has been studied in neat as well as aqueous (up to 12 vol% water) acetone at 35 °C using CuCl/bipyridine (bpy) catalyst and ethyl 2-bromoisobutyrate as the initiator. Addition of water significantly enhances the rate of polymerization without losing control. Unlike CuCl/bpy the CuBr/bpy catalyst gives poor control which is attributed to the lower solubility and consequent heterogeneity in the latter case. Of the other ligands used with the CuCl catalyst viz. o-phenanthroline (o-phen), 1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA), 1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA), Me₆TREN only o-phen offers reasonably good control. The CuCl/bpy catalyst system has been used also in preparing some di- and tri-block copolymers with reasonably low polydispersity index (PDI) at ambient temperature (35 °C) using aqueous acetone as the solvent. The following block copolymers have been prepared PMMA-tBMA, PMMA-b-tBMA-b-MMA, PMMA-DMAEMA, by this method.     

Design of novel poly(methyl vinyl ether) containing AB and ABC block copolymers by the dual initiator strategy

A new set of block copolymers containing poly(methyl vinyl ether) (PMVE) on one hand and poly(tert-butyl acrylate), poly(acrylic acid), poly(methyl acrylate) or polystyrene on the other hand, have been prepared by the use of a novel dual initiator 2-bromo-(3,3-diethoxy-propyl)-2-methylpropanoate. The dual initiator has been applied in a sequential process to prepare well-defined block copolymers of poly(methyl vinyl ether) (PMVE) and hydrolizable poly(tert-butyl acrylate) (PtBA), poly(methyl acrylate) (PMA) or polystyrene (PS) by living cationic polymerization and atom transfer radical polymerization (ATRP), respectively. In a first step, the Br and acetal end groups of the dual initiator have been used to generate well-defined homopolymers by ATRP (resulting in polymers with remaining acetal function) and living cationic polymerization (PMVE with pendant Br end group), respectively. In a second step, those acetal functionalized polymers and PMVE-Br homopolymers have been used as macroinitiators for the preparation of PMVE-containing block copolymers. After hydrolysis of the tert-butyl groups in the PMVE-b-ptBA block copolymer, PMVE-b-poly(acrylic acid) (PMVE-b-PAA) is obtained. Chain extension of the AB diblock copolymers by ATRP gives rise to ABC triblock copolymers. The polymers have been characterized by MALDI-TOF, GPC and ¹H NMR.