The synthesis and characterization of polystyrene/magnetic polyhedral oligomeric silsesquioxane (POSS) nanocomposites

Fc-CHCH-C₆H₆-(C₅H₉)₇Si₈O₁₂ (POSS1, Fc: ferrocene) which contain both metal and CC double bond was firstly synthesized by Wittig reaction. The chemical structure of POSS1 was characterized by FTIR, ¹H, ¹³C and ²⁹Si NMR, mass spectrometry and elemental analysis, and the magnetic property of POSS1 have also been studied. Polystyrene composites containing inorganic-organic hybrid polyhedral oligomeric silsesquioxane (POSS1) were prepared by bulk free radical polymerization. XRD and TEM studies indicate that POSS1 is completely dispersed at molecular level in PS matrix when 1 wt% POSS1 is introduced, while some POSS1-rich nanoparticals are present when content of POSS1 is beyond 3 wt%. GPC results show that molecular weight of the PS/POSS1 nanocomposites are increased with addition of POSS1. TGA and TMA data show the thermal stabilities of PS/POSS1 nanocomposites have been improved compared to neat PS. The PS/POSS1 nanocomposites also display higher glass transition temperatures (T_g) in comparison with neat PS. Viscoelastic properties of PS/POSS1 nanocomposites were investigated by DMTA. The results show the storage modulus (E′) values (temperature>T_g) and the loss factor peak values of the PS/POSS1 nanocomposites are higher than that of neat PS. Mechanical properties of the PS/POSS1 nanocomposites are improved compared to the neat PS.     

Epoxy nanocomposites with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane

The POSS-containing nanocomposites of epoxy resin were prepared via the co-curing reaction between octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) and the precursors of epoxy resin. The curing reactions were started from the initially homogeneous ternary solution of diglycidyl ether of bisphenol A (DGEBA), 4,4′-Diaminodiphenylmethane (DDM) and OpePOSS. The nanocomposites containing up to 40 wt% of POSS were obtained. The homogeneous dispersion of POSS cages in the epoxy matrices was evidenced by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM) and atomic force microscopy (AFM). Differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) showed that at the lower POSS concentrations (<30 wt%) the glass transition temperatures (T_gs) of the nanocomposites almost remained invariant whereas the nanocomposites containing POSS more than 40 wt% displayed the lower T_gs than the control epoxy. The DMA results show that the moduli of the nanocomposites in glass and rubbery states are significantly higher than those of the control epoxy, indicating the nanoreinforcement effect of POSS cages. Thermogravimetric analysis (TGA) indicates that the thermal stability of the polymer matrix was not sacrificed by introducing a small amount of POSS, whereas the properties of oxidation resistance of the materials were significantly enhanced. The improved thermal stability could be ascribed to the nanoscaled dispersion of POSS cages and the formation of tether structure of POSS cages with epoxy matrix.     

Epoxy nanocomposites containing mercaptopropyl polyhedral oligomeric silsesquioxane: Morphology,thermal properties,and toughening mechanism

A novel polyhedral oligomeric silsesquioxane (POSS) containing a mercaptopropyl group [mercaptopropyl polyhedral oligomeric silsesquioxane (MPOSS)] was synthesized via the hydrolytic condensation of γ-mercaptopropyl triethoxysilane in an ethanol solution catalyzed by concentrated hydrochloric acid and was used to modify epoxy–amine networks by a cocuring reaction with diglycidyl ether of bisphenol A (DGEBA). The structure, morphology, and thermal and mechanical properties of these MPOSS/DGEBA epoxy nanocomposites were studied and investigated with thermogravimetric analysis/differential thermal analysis (TGA–DTA), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). From SEM analysis, we observed that the miscibility between epoxy and POSS occurred at a relatively high POSS content, which characterized this mixture as a polymer nanocomposite system. The impact test showed that MPOSS reinforced the epoxy effectively, and the SEM study of the impact fracture surface showed that the fibrous yielding phenomenon observed was an indication of the transition of the brittle stage to a ductile stage and correlated well with the large increases in the impact strength; this was in agreement with the in situ reinforcing and toughening mechanism. The TGA–DTA analysis indicated that the MPOSS/DGEBA epoxy hybrids exhibited lower thermostability at a lower temperature but higher thermostability and higher efficiency in char formation at an elevated temperature. Differential scanning calorimetry showed that the glass transition temperature (T_g) of the MPOSS/epoxy hybrids were lower than that of the neat epoxy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

笼型倍半硅氧烷改性UPR的固化性能与热性能

采用示差扫描量热仪(DSC),热重分析仪(TGA)及动态力学分析仪(DMA)研究了甲基丙烯酰氧丙基笼型倍半硅氧烷(MAP-POSS)与一缩二乙二醇型UPR、苯乙烯的等温共固化反应及动力学,测试了固化物的热性能和动态力学性能。结果表明,固化过程符合自催化反应机理,当体系中MAP-POSS质量分数为5%时,5%热失重温度和残留量5%时的温度较未加体系分别提高7℃和31℃,玻璃化转变温度降低4.2℃,热降解动力学符合1级反应。     

笼型倍半硅氧烷（POSS）的功能化改性 及应用研究进展

有机/无机杂化材料的改性及应用是目前材料科学中最富有活力的研究领域之一。其中笼型倍半硅氧烷（Polyhedral oligomeric silsesquioxane,POSS）在分子水平上实现了有机组分与无机组分的结合,结构呈硅氧骨架连接的立体笼型,具有优异的反应活性、耐热阻燃性、多孔性和纳米尺寸效应等特性,通过化学改性可将其应用在多个领域。本文主要从官能团改性、聚合改性和配位改性三个方面阐述了POSS的改性方法,综述了POSS在耐热材料、阻燃材料、增强材料和多孔材料等领域的应用研究进展,并对POSS今后的研究方向提出了展望。可从POSS的构效关系、改性方法以及安全性等方面进行更加深入和系统的研究,以促进POSS材料更广泛的应用。     

Polymer/polyhedral oligomeric silsesquioxane (POSS) nanocomposites: An overview of fire retardance

A review is presented of the recent developments concerning the use of polyhedral oligomeric silsesquioxane (POSS) for designing polymer nanocomposites endowed with enhanced fire retardancy. Emphasis is placed on the scientific and technological advances in the use of POSS as fire retardants, as well as on the achievements and challenges associated to the exploitation of POSS either alone or in combination with conventional fire retardants to provide the required fire retardancy to polymer materials. Polymer/POSS nanocomposites show a great potential to provide materials characterized by improved fire retardancy together with superior physical properties and environmental neutrality. Achievements obtained with POSS in fire retardancy are presented for the different types of polymer materials and critically discussed, especially in terms of the modes of fire retardant action, in the attempt to reveal attractive strategies for successful development of the next generation of polymer/POSS materials and applications.     

笼型倍半硅氧烷(POSS)/环氧杂化树脂体系固化反应动力学及性能研究

为了提高环氧树脂的耐热性,采用笼型倍半硅氧烷(POSS)改性双酚A型环氧树脂E51,得到有机无机杂化树脂。采用Ozawa和Kissinger两种方法研究了杂化树脂/4,4′-二氨基苯砜(DDS)体系的固化反应动力学。TGA分析表明,POSS的加入提高了E51/DDS固化树脂体系的热性能。     

离子型聚合反应机理制备聚合物/POSS纳米杂化材料的研究进展

多面体低聚倍半硅氧烷（POSS,Polyhedral Oligomeric Silsesquioxane）作为一种特殊的有机/无机杂化纳米粒子备受关注。本文综述了国内外通过离子型反应机理制备聚合物/POSS纳米杂化材料的一些进展,着重介绍反应机理、特点,并对这一领域的前景进行了展望。     

Molecular dynamics simulation of mixed matrix nanocomposites containing polyimide and polyhedral oligomeric silsesquioxane (POSS)

Mixed matrix blends containing polyimide (PI) and polyhedral oligomeric silsesquioxanes (POSS) are studied with atomistic molecular dynamics simulation. To examine the effect of functional group, two types of POSS are considered, either octahydrido silsesquioxane (OHS) or octaaminophenyl silsesquioxane (OAPS). The glass transition temperature of the model PI-OAPS blends increases with the incorporation of OAPS, an observation consistent with recent experiments on these systems. A decrease in glass transition temperature is shown for the model PI-OHS blends. Radial distribution functions for both blends are presented to show how packing between the inorganic (POSS) and organic (PI) species in the mixed matrix varies as a function of POSS loading and POSS functionalization. In addition, we report the mobility of the PI chains and POSS molecules in the material by calculating the mean square displacement. These results provide molecular insight about thermal property enhancements afforded by POSS-based additives.     

Investigation of the thermal,mechanical and morphological properties of poly(vinyl chloride)/polyhedral oligomeric silsesquioxane nanocomposites

Research into organic–inorganic nanocomposites has recently become popular, particularly the development of new polymer nanocomposites. Compared to pristine polymers or conventional composites, these nanocomposites exhibit improved properties. The storage modulus of a poly(vinyl chloride) (PVC)/polyhedral oligomeric silsesquioxane (POSS) nanocomposite slightly decreased with POSS content, but had a higher modulus from 50 to 100 °C. Some of the material appeared to be aggregated with 1 wt% POSS in the polymeric matrix. Conversely, with a POSS content of 5 wt%, a better dispersion of the nanoparticles was observed. The presence of POSS in the plasticised PVC compound had little influence on the final properties of the nanocomposites, showing weaker interactions between the POSS and the plasticised PVC compound. Copyright © 2010 Society of Chemical Industry     

Epoxy/polyhedral oligomeric silsesquioxane (POSS) hybrid networks cured with an anhydride: Cure kinetics and thermal properties

A new class of organic-inorganic hybrid networks was prepared via copolymerization of octakis(dimethylsiloxybutyl epoxide)octasilsesquioxane (OB), N,N,N′,N′-tetraglycidyl-4,4′-diaminodiphenyl methane (TGDDM) and hexahydrophthalic anhydride (HHPA). Kinetic studies show that even with 1H-imidazole as the catalyst, the rate for the curing of OB/HHPA is still significantly higher than that for TGDDM/HHPA in the temperature range studied. Two-stage reactions were thus carried out to allow OB to react with HHPA first (Stage I). The glass transition temperature (T_g) of the networks was found to be strongly dependent on Stage I reaction since too short a reaction time caused poor bonding of OB to the networks while too long a reaction time led to the formation of OB oligomers that de-homogenized the networks. With 5 mol.% OB, the hybrid prepared via the optimized two-stage reaction displayed a large jump of ∼20 °C in T_g, which was accompanied by slight improvements in thermal degradation temperature and storage modulus, as compared to TGDDM/HHPA.     

Isothermal crystallization of HDPE/octamethyl polyhedral oligomeric silsesquioxane nanocomposites: Role of POSS as a nanofiller

The isothermal crystallization of HDPE/POSS (polyhedral oligomeric silsesquioxane) nanocomposites (POSS content varying from 0.25 to 10 wt %) was studied using differential scanning calorimetry (DSC) technique. The Avrami model could successfully describe the isothermal crystallization behavior of the nanocomposites. The value of Avrami exponent (n) varies between 2 and 2.5 for all the compositions studied. For a given composition, the values vary with crystallization temperature and in general increased with POSS content up to 1 wt % POSS content and decreased thereafter. The presence of POSS was found to increase the rate of crystallization, which manifested itself in the increased value of the Avrami rate constant (K) and reduced value of crystallization half‐time (t_1/2). The rate of crystallization peaked at 1 wt % POSS content and was almost constant at higher POSS loadings. X‐ray diffraction studies revealed that POSS exists as nanocrystals in HDPE matrix while some POSS gets dispersed at molecular level too. It is observed that only the POSS dispersed at molecular level acts as a nucleating agent while the POSS nanocrystals do not affect the crystallization process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation and thermal property of hybrid nanocomposites by free radical copolymerization of styrene with octavinyl polyhedral oligomeric silsesquioxane

The poly(styrene‐co‐octavinyl‐polyhedral oligomeric silsesquioxane) (PS–POSS) organic–inorganic hybrid nanocomposites containing various percent of POSS were prepared via one‐step free radical polymerization and characterized by FTIR, high‐resolution ¹H NMR, ²⁹Si NMR, GPC, DSC, and TGA technologies. The POSS contents in these nanocomposites were determined using FTIR calibration curve. The result shows that the POSS contents in nanocomposites can be tailored by varying the POSS feed ratios. On the basis of the POSS contents in the nanocomposites and the ¹H NMR spectra, the number of reacted vinyl groups of each octavinyl‐POSS macromonomer were calculated to be 6–8. DSC and TGA measurements indicate that the incorporation of POSS into PS homopolymer can apparently improve the thermal properties of the polymeric materials. The dramatic T_g and T_dec increases are mainly due to the formation of star and low cross‐linking structure of the nanocomposites, where POSS cores behave as the joint points and hinder the motion and degradation of the polymeric chains. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

ABA triblock copolymers containing polyhedral oligomeric silsesquioxane pendant groups: synthesis and unique properties

The synthesis and characterization of POSS containing ABA triblock copolymers is reported. The use of atom transfer radical polymerization (ATRP) enabled the preparation of well-defined model copolymers possessing a rubbery poly(n-butyl acrylate)(pBA) middle segment and glassy poly(3-(3,5,7,9,11,13,15-heptaisobutyl-pentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]-octasiloxane-1-yl)propyl methacrylate(p(MA-POSS)) outer segments. By tuning the relative composition and degree of polymerization (DP) of the two segments, phase separated microstructures were formed in thin films of the copolymer. Specifically, dynamic mechanical analysis and transmission electron microscopy (TEM) observations reveal that for a small molar ratio of p(MA-POSS)/pBA (DP=6/481/6) no evidence of microphase separation is evident while a large ratio (10/201/10) reveals strong microphase separation. Surprisingly, the microphase-separated material exhibits a tensile modulus larger than expected (ca. 2×10⁸ Pa) for a continuous rubber phase for temperatures between a pBA-related T_g and a softening point for the p(MA-POSS)-rich phase. Transmission electron microscopy (TEM) images with selective staining for POSS revealed the formation of a morphology consisting of pBA cylinders in a continuous p(MA-POSS) phase. Thermal studies have revealed the existence of two clear glass transitions in the microphase-separated system with strong physical aging evident for annealing temperatures near the T_g of the higher T_g phase (p(MA-POSS). The observed aging is reflected in wide-angle X-ray scattering as the strengthening of a low-angle POSS-dominated scattering peak, suggesting some level of ordering during physical aging. The T_g of the POSS-rich phase observed in the microphase separated triblock copolymer was nearly 25 °C higher than that of a POSS-homopolymer of the same molecular weight, suggesting a strong confinement-based enhancement of T_g in this system.     

Poly(vinyl pyrrolidone‐co‐octavinyl polyhedral oligomeric silsesquioxane) hybrid nanocomposites: Preparation,thermal properties,and Tg improvement mechanism

A series of poly(vinyl pyrrolidone‐co‐octavinyl polyhedral oligomeric silsesquioxanes) (PVP‐POSS) organic–inorganic hybrid nanocomposites containing different percentages of POSS were prepared via free radical polymerization and characterized by FTIR, high‐resolution ¹H‐NMR, solid‐state ²⁹Si‐NMR, GPC, DSC, and TGA. POSS contents in these nanocomposites can be effectively controlled by varying the POSS feed ratios which can be accurately quantified by FTIR curve calibration. On the basis of ²⁹Si‐NMR spectra, average numbers of reacted vinyl groups of each octavinyl‐POSS macromer are calculated to be 5–7, which depends on POSS feed ratios. Both GPC and DSC results indicate that these nanocomposites display network structure and the degree of crosslinking increases with the increase of the POSS content. The incorporation of POSS into PVP significantly improves their thermal properties (T_g and T_dec) primarily due to crosslinking structure and dipole–dipole interaction between POSS cores and PVP carbonyl groups. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

笼型倍半硅氧烷改性的耐高温厌氧胶

以环氧丙烯酸酯为单体,不饱和笼型倍半硅氧烷(POSS)及N-对甲苯基马来酰亚胺(NPTM I)为耐高温改性剂,选择合适的氧化还原体系及其他助剂,制成耐高温厌氧胶,并对其性能进行了相关测试。结果表明,此厌氧胶剪切强度最高达20 MPa,在200℃剪切强度保持率为75%左右,耐高温性能良好。     

Epoxy‐functionalized polyhedral oligomeric silsesquioxane/cyanate ester resin organic–inorganic hybrids with enhanced mechanical and thermal properties

A series of cyanate ester resin (CE) based organic–inorganic hybrids containing different contents (0, 5, 10, 15 and 20 wt%) of epoxy‐functionalized polyhedral oligomeric silsesquioxane (POSS‐Ep) were prepared by casting and curing. The hybrid resin systems were studied by the gel time test to evaluate the effect of POSS‐Ep on the curing reactivity of CE. The impact and flexural strengths of the hybrids were investigated. The micromorphological, dynamic mechanical and thermal properties of the hybrids were studied by SEM, dynamic mechanical analysis (DMA) and TGA, respectively. Results showed that POSS‐Ep prolonged the gel time of CE. CE10 containing 10 wt% POSS‐Ep displayed not only the optimum impact strength but the optimum flexural strength. SEM results revealed that the improvement of mechanical properties was attributed to the large amount of tough whirls and fiber‐like pull‐outs observed on the fracture surfaces of CE10. DMA results indicated that POSS‐CE tended to decrease E′ of the hybrids in the glassy state but to increase E′ of the hybrids in the rubbery state. TGA results showed that CE10 also possesses the best thermal stability. The initial temperature of decomposition (T_i) of CE10 is 426 °C, 44 °C higher than that of pristine CE. © 2013 Society of Chemical Industry     

Synthesis of 3,13-diglycidyloxypropyloctaphenyl double-decker polyhedral oligomeric silsesquioxane and the thermal reaction properties with thermosetting phenol-formaldehyde resin

3,13-Diglycidyloxypropyloctaphenyl double-decker silsesquioxane (EP-DDSQ) was synthesized by process of alkaline hydrolysis condensation of phenyltrimethoxysilane and corner capping reaction of methyldichlorosilane, followed by hydrosilylation with allyl glycidyl ether, and the resultant structure was confirmed by fourier transform infrared spectrometer (FTIR) and nuclear magnetic resonance (NMR), respectively. The thermosetting phenol-formaldehyde (PF) resin was then modified by EP-DDSQ, and the reactivity of PF resin with EP-DDSQ and thermal pyrolysis of modified cured resin were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The surface morphologies of modified resins at high temperature were characterized with field emission scanning electron microscope (FESEM), and chemical structure of modified resins was analyzed through X-ray photoelectron spectrometer (XPS). The results showed that the appropriate addition of EP-DDSQ did not affect the curing temperature of the PF resin itself, but could improve the heat resistance of the system. When the amount of EP-DDSQ added was 10%, the initial degradation temperature of PF resin was increased by 49.31°C, and when the amount of EP-DDSQ added was 16%, the char yield of which was reached up to 61.39%, compared with that of pure PF resin (TGA_1,000°C of 57.62%) at Ar atmosphere. More importantly, the modified resin formed a regular and dense layer of SiC and SiO_x ceramic on the surface after ablation in the muffle furnace at 800°C air atmosphere, which is very important for ablative resistant materials.     

笼状硅氧烷低聚物/聚合物复合材料的研究进展

介绍了笼状硅氧烷低聚物（POSS）的概念、分类及其合成工艺,综述了POSS／聚合物复合材料的制备方法及其在提高聚合物在热稳定性、阻燃性能、医学性能、光电性能、形状记忆及表面性能等方面的应用。