Design and stabilization of block copolymer micelles via phenol-pyridine hydrogen-bonding interactions

A new approach for the preparation of block copolymer micelles in non-selective solvent is introduced. Phenol-pyridine hydrogen-bonding interactions are used for the first time to prepare core-shell micelles in non-selective solvents using block copolymers and bifunctional low-molecular-weight hydrogen-bonding crosslinkers. Poly(styrene-b-4-vinylphenol)/Bis-pyridyl ethane and poly(styrene-b-4-vinylpyridine)/Bisphenol A were investigated as micelle formation due to phenol-pyridine hydrogen bond crosslinking. The influence of several factors such as temperature, concentration, solvent and pH in micellization-demicellization process was analyzed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), dynamic light scattering (DLS) and atomic force microscopy (AFM). This method opens new possibilities to the generation of block copolymer micelles in non-selective solvents.     

Long-tailed spherical aggregates formed from ABA triblock copolymer by changing the properties of selective solvent

A convenient method of tuning aggregate morphologies from amphiphilic block copolymer by adding second selective solvent is introduced in this paper. Some novel aggregate morphologies, i.e. hierarchical vesicles (and compound spherical micelles) with one or more tails, were formed by introducing a second selective solvent for core-forming blocks into the poly(4-vinyl pyridine)-b-polystyrene-b-poly(4-vinyl pyridine) ABA amphiphilic block copolymer/co-solvent/water systems. Addition of selective solvent (toluene) for core-forming blocks (PS blocks) has significant effect on the aggregate morphologies from the amphiphilic triblock copolymer. The aggregate morphologies changed from spheres to rods, long tailed solid large compound spheres, and to long tailed hierarchical vesicles by adding 0.5, 10 and 30 wt% of toluene to the organic solvent, respectively. There exists an aggregate morphological transition of the long tailed hierarchical vesicles to long tailed solid spheres by decreasing the content of toluene in the organic solvent mixture. The tails disappeared, and irregular vesicular and spherical structures were formed when the toluene content was 20 wt%. The toluene addition is expected to increase the stretching of the core-forming blocks (PS), and to modify the interfacial tension of core-corona interface, which are the main reasons for the aggregate morphology transition. To the best of our knowledge, these tailed vesicles and spherical morphologies have not been found in block copolymer aggregates system up to now.     

Synthesis of an amphiphilic copolymer bearing rhodamine moieties and its self-assembly into micelles as chemosensors for Fe in aqueous solution

We report on the fabrication of an amphiphilic random copolymer-based colorimetric and fluorescent chemosensor for Fe³⁺ ions that was prepared by free radical polymerization of a novel rhodamine-based Fe³⁺-recognizing monomer, R6GEM, with N-vinylpyrrolidone (NVP). Because of its amphiphilic property, the copolymer P(NVP-co-R6GEM) can self-assemble into micelles, which allows it to be used as a chemosensor in aqueous solution. Upon addition of Fe³⁺ ions to the micelle solution, visual color change and fluorescence enhancement were observed. Moreover, other metal ions did not induce obvious changes to the absorption and fluorescence spectra. The water dispersibility and biocompatibility of these polymer micelles could provide a new strategy for detecting analytes in environmental and biological systems.     

Crystal structure analysis of cylindrical phase of polystyrene-b-polyethylenebutylene-b-polystyrene triblock copolymer

Crystal structure analysis of cylindrical phase of polystyrene-b-polyethylenebutylene-b-polystyrene triblock polymer was carried out. One cylinder with radius 74.20 Å passes through a hexagonal unit cell with c=∞, β=120°. The temperature factor which reflects the disorder of the cylinder is 14,525 and 〈Δr²〉^1/2 is estimated as 13.56 Å. This suggests that the cylinder is distorted and the surface of the cylinder is disordered.     

Silica reinforced triblock copolymer gels

The effect of silica and polymer coated silica particles as reinforcing agents on the structural and mechanical properties of polystyrene-poly(ethylene/butylene)-polystyrene (PS-PEB-PS) triblock gel has been investigated. Different types of chemically modified silica have been compared in order to evaluate the influence of the compatibility between gel and filler.Time-resolved SANS and small-angle X-ray scattering (SAXS) shows that the presence of silica particles affects the ordering of the polystyrene domains during gelsetting. The scattering pattern of silica-reinforced gels reveals strong scattering at very low q, but no structure and formfactor information. However, on heating above the viscoelastic to plastic transition, the ‘typical’ scattering pattern of the copolymer gel builds-up. All reinforced gels are strengthened by the addition of the reinforcing agent. The transitions from a viscoelastic rubber to a plastic fluid and from a plastic fluid to a viscoelastic liquid are shifted to more elevated temperatures when silica is added to the triblock copolymer gel.     

Structure and phase transition in thin films of block copolymer micelles complexed with inorganic precursors

Block copolymer micelle can be used as nano-reactor where separated domains serve as a compartment for the production of nanomaterials, ultimately creating nanocomposite materials. In this work, thin nanocomposite films generated from polystyrene-b-poly(acrylic acid) (PS-b-PAA) micellar solution in which small amount of inorganic precursor was added were investigated. The films were prepared by spin coating onto silicon substrate, and then solvent-annealed. As-spun films exhibit typical micellar structure with spherical shape along which inorganic nanoparticles are dispersed. Such morphology remains unchanged after solvent annealing for micellar films with small amount of inorganic precursor. However, further increase in the amount of inorganic precursors brings about the morphological changes, producing different organization of inorganic nanoparticles in composite films. This behavior was found to strongly depend on the types of precursors and solvents used for annealing. These results illustrate a simple yet useful route to generate the polymeric nanocomposites with diverse structure and composition.     

Fluorescence studies of pyrene-labelled, pH-responsive diblock copolymer micelles in aqueous solution

Fluorescence spectroscopic techniques, and time-resolved anisotropy measurements (TRAMS) in particular, have provided valuable information regarding micelle formation in luminescently labelled pH-responsive diblock copolymers of 2-(diethylamino)ethyl methacrylate (DEA) and 2-(dimethylamino)ethyl methacrylate (DMA). A pyrenyl derivative, located at the DEA block, allowed motion of this site to be monitored via TRAMS in aqueous solution: a significant reduction in the mobility of this label was apparent at concentrations in excess of the critical micelle concentration, CMC, of the diblock copolymer. This is consistent with the labelled DEA block being located in the core of the micelles. At concentrations below the CMC, unimers were detected in solution. The micelle size estimated from TRAMS is approximately half of that determined from dynamic light scattering measurements. This suggests that the chain ends of the block copolymer are not “frozen” into position but that limited motion may occur due to fluidity within the micelle core. This is reasonable given the low T_g of the DEA block. Alternatively, a model is proposed which suggests that the interior of the micelle is a hard sphere, surrounded by flexible, fast-moving corona, which imparts little viscous drag on the core.     

Crystallization and coalescence of block copolymer micelles in semicrystalline block copolymer/amorphous homopolymer blends

Crystallization of two oxyethylene/oxybutylene block copolymers (E₇₆B₃₈ and E₁₅₅B₇₆) from micelles in block copolymer/amorphous homopolymer blends was studied by differential scanning calorimetry (DSC) and time-resolved small angle X-ray scattering (SAXS). Unlike the simultaneous crystallization and formation of superstructure in crystallization from an ordered structure, crystallization of block copolymer from micelles can be divided into two steps. The core of the micelles firstly crystallizes individually, with first-order crystallization kinetics and homogeneous nucleation mechanism. The SAXS revealed that crystallization-induced deformation occurs for the micelles, which strongly depends on microstructure of the block copolymers. For the shorter block copolymer E₇₆B₃₈, larger deformation induced by crystallization was observed, leading to coalescence of the micelles after crystallization, while for the longer block copolymer E₁₅₅B₇₆ the micelles show little deformation and the morphology of micelle is retained after crystallization.     

Polymeric micelles formed by polypeptide graft copolymer and its mixtures with polypeptide block copolymer

Polymeric micelles based on poly(γ-benzyl-l-glutamate)-poly(ethylene glycol) graft copolymer (PBLG-g-PEG) with various degrees of grafting and the mixtures composed of PBLG-g-PEG and poly(γ-benzyl-l-glutamate)-poly(ethylene glycol) block copolymer (PBLG-b-PEG) were prepared by the dialysis method in deionized water. Fluorescence spectroscopy and transmission electron microscope (TEM) have been used to study the self-assembly behavior. The experimental results revealed that the degree of grafting exerts marked effect on the critical micelle concentration (CMC) and the morphology of the micelle formed by PBLG-g-PEG. With increasing the degree of grafting, the CMC value becomes larger and the morphology of formed micelle changes from irregular shape to spindle. It was also found that mixtures of PBLG-g-PEG/PBLG-b-PEG can associate into hybrid polymeric micelle with various shapes.     

Small angle neutron scattering study of the structure of a triblock copolymer of styrene and isoprene during extension

A triblock copolymer with a styrene weight fraction of 0.41, has been examined at various extension ratios using small angle neutron scattering. The original ‘polycrystalline’ material with a face centred cubic arrangement of styrene domains acquires orientation as the extension ratio increases. Affine deformation is not obeyed at the supramolecular level and there is some evidence for non-uniform stress at this level.     

Nano-phase structures and mechanical properties of epoxy/acryl triblock copolymer alloys

Phase structures and mechanical properties of epoxy/acryl triblock copolymer alloys using several curing agents were studied. PMMA-b-PnBA-b-PMMA triblock copolymers synthesized by living anionic polymerization were applied as the toughening modifiers for the epoxy resins. An aromatic amine, an acid anhydride and an anionic polymerization catalyst as curing agents resulted in macro-phase separation in the epoxy/triblock copolymer blends during the cure process. However, a phenol novolac as the curing agent created nano-phase structures in the epoxy blends. The size of the spherical phases or cylindrical phases was about 40 nm in diameter, and the main component in the nano-phases was the PnBA of the triblock copolymer. The fracture toughness of the epoxy/triblock copolymer alloys with the nano-cylindrical phases reached 2530 J/m². The fracture toughness was more than twenty fold relative to the unmodified epoxy resin, and was equivalent to the toughness of polycarbonates.     

PTPFCBBMA-b-PEG-b-PTPFCBBMA amphiphilic triblock copolymer: Synthesis and self-assembly behavior

We present the synthesis and self-assembly behavior of a new semi-fluorinated amphiphilic triblock copolymer. A series of perfluorocyclobutyl aryl ether-based amphiphilic ABA triblock copolymer containing hydrophilic poly(ethylene glycol) segment as the middle block were synthesized by atom transfer radical polymerization (ATRP). ATRP of 4-(4′-p-tolyloxyperfluorocyclobutoxy)benzyl methacrylate was initiated by PEG-based bifunctional macroinitiators with different molecular weights to obtain the desired copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.30) and the number of perfluorocyclobutyl linkage can be tuned by the feed ratio and the conversion of the fluorine-containing methacrylic monomer. The critical micelle concentrations of these amphiphilic ABA triblock copolymers in aqueous media were determined by fluorescence probe technique. They could aggregate to form spherical and cylindrical micelles visualized by TEM with varying the content of hydrophobic segment.     

Molecular characterization of α,β-poly(N-2-hydroxyethyl)-dl-aspartamide derivatives as potential self-assembling copolymers forming polymeric micelles

A family of graft copolymers derivatives obtained from α,β-poly(N-2-hydroxyethyl)-dl-aspartamide (PHEA) have been studied as potential self-assembling macromolecules forming stable polymeric micelles at low critical micellar concentration. These polymers are obtained grafting on PHEA poly(ethylene glycol) (PEG) (M_w 5000 g/mol) (PHEA-PEG), hexadecylamine (PHEA-C₁₆) or both moieties (PHEA-PEG-C₁₆). The PHEA derivatives were characterised by a multi-angle light scattering (MALS) photometer on line to a size exclusion chromatography system in obtaining the molar mass distribution of the polymers. In addition, to investigate the capacity to form micellar aggregates in aqueous medium the MALS photometer was used in off-line batch mode in obtaining molar mass and dimension of the polymeric aggregates.     

Preparation of liquid‐filled micelles based on an amphiphilic triblock copolymer

A series of novel amphiphilic triblock poly(ethylene glycol)‐b‐poly(2‐aminoethyl methacrylate hydrochloride)‐b‐poly(heptadeca‐fluorodecyl acrylate) (PEG‐b‐PAEMA‐b‐PHFDA) comprised of two hydrophilic PEG and PAEMA segments and one hydrophobic PHFDA segment was designed and synthesized. The structure of the triblock copolymer was characterized by ¹H‐NMR and GPC analysis. The amphiphilic triblock copolymer was capable of self‐assembling into liquid‐filled micelles that consisted of PHFDA and liquid perfluorocarbons (PFCs) as the core and PEG as outer shell. PAEMA can be used as cross‐linking sites to increase the stability of the liquid‐filled micelles. The shape, size, and Acoustic properties of the obtained liquid‐filled micelles were investigated. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Multicompartment micelles formed from star-dendritic triblock copolymers in selective solvents: A dissipative particle dynamics study

Dissipative particle dynamics method was used to study the multicompartment micelles formed from star-dendritic triblock copolymers in selective solvents, in which particular attention was paid to the effects of dendritic structure. The simulations show that the dendritic structure not only influences the morphology and the formation process of multicompartment micelles formed, but also the response of the micelle structure to solvent quality. The information obtained is useful for the future design of multicompartment micelles for practical applications, especially in the field of drug delivery.     

Diffusion of hairy polymeric micelles in a homopolymer solution

Polystyrene-block-poly(4-vinylpyridine) (PS-b-PVP) forms hairy micelles with PVP and long PS block as the core and corona in toluene, respectively. Diffusion of the micelles in solution in the presence of poly(methyl methacrylate) (PMMA) or polystyrene homopolymer (h-PS), from dilute to semidilute, has been investigated by laser light scattering (LLS). Our results indicate the micelles only exhibit translational diffusion with characteristic Γ = Dq² in PMMA dilute and semidilute solutions, where Γ, D and q are characteristic line width, translational diffusion coefficient and scattering vector, respectively. PMMA concentration dependence of D reveals that the micelle diffusion follows a “stretched exponential” scaling law, similar to that of a hard sphere in the presence of matrix polymer. This is because the PS corona is incompatible with PMMA and no entanglement between them occurs. In contrast, in h-PS solution, due to the overlap and entanglement between the PS corona and h-PS matrix, the micelles exhibit diffusion with characteristic of Γ ∝ q^α, where α = 2-2.6. For the same matrix polymer concentration, the micelles exhibit a faster diffusion in PMMA solution than that in h-PS solution, especially in semidilute solutions. The fact further indicates that the overlap and entanglement between the corona and h-PS matrix restrict the micelle motion.     

Dynamics of amylopectin in semidilute aqueous solution

The dynamic behaviors of potato amylopectin and waxy corn amylopectin in semidilute solution were investigated by laser light scattering and viscometer. For potato amylopectin with relatively smaller molecular weight, only pure diffusion motion of amylopectin was found by LLS in dilute regime. When the concentration was above the critical overlapping concentration (C^∗), three relaxation modes were found. The line-width of fast mode (Γ_f) had a q² dependence, where q is the scattering vector, and the correlative length (〈ξ_h〉) could be scaled to concentration (C) as 〈ξ_h〉 ∼ C^−0.79±0.1 when C > 2%. This mode was attributed to the cooperative relaxation motion of the “blobs” in the transient network. The line-width of slow relaxation mode (Γ_s) could be scaled with q as Γs∼qαs, α_s varying from 2.0 to 2.66 as the concentration increased. The relaxation time of slow relaxation mode (τ_s) had a C^1.8±0.1 dependence. This mode was originated from the association of the amylopectin. The medium mode was found when C > 4%. The line-width of medium relaxation mode (Γ_m) could be scaled to q as Γm∼qαm, α_m varying from 2.7 to 2.5 with the increasing concentration. The relaxation time of medium relaxation mode (τ_m) had C^0.7±0.1 dependence. The relative intensity contribution of the medium relaxation mode decreased with a rise in the concentration. This mode was attributed to the thermally agitated density fluctuation in semidilute solution induced by heterogeneities of the transient network. For waxy corn amylopectin with relatively huge molecular weight (∼10⁸ g/mol), only the internal motion of the single amylopectin molecule was found in dilute regime when qR_g ≥ 2, where R_g is the gyration radius of amylopectin. It was also found that there were three relaxation modes in semidilute solution of waxy corn amylopectin. The fast relaxation mode was found to be caused first by the internal motion of the single amylopectin molecule, and then, with the increasing concentration, by the cooperative motion of the transient network. The medium and slow relaxations for waxy corn amylopectin have the same physical origin as those for potato amylopectin. However, the C dependence and the q dependence of the medium and slow relaxation times for waxy corn amylopectin were different from those for potato amylopectin. This was attributed to the strong dynamic coupling effect in semidilute solution of the waxy corn amylopectin. The concentration dependence of the viscosity of amylopectin in semidilute solution indicated that the topological entanglement of amylopectin was weak due to the highly branching.     

Synthesis of amphiphilic polyethylene-b-poly(l-glutamate) block copolymers with vastly different solubilities and their stimuli-responsive polymeric micelles in aqueous solution

This paper describes the synthesis, characterization, and self-assembly behavior of amphiphilic polyethylene-block-poly(l-glutamate) (PE-b-PGA) diblock copolymers. PE-b-PGA diblock copolymers were obtained by ring-opening polymerization (ROP) of γ-benzyl-l-glutamate-N-carboxyanhydride (BLG-NCA) using PE–COOCH(ⁱPr)NH₂ as a macroinitiator and subsequent deprotection of the benzylester groups. The self-assembly behaviors of the PE-b-PGA copolymers in water were studied as a function of pH and ionic strength by means of fluorescence spectroscopy, laser light scattering, UV-circular dichroism, and transmission electron microscopy. The size of the polymeric micelles decreases with a decreasing pH value even at high salt concentrations because the solvating PGA units can perform a coil-to-helix transition.     

Morphological and mechanical study of nanostructured epoxy systems modified with amphiphilic poly(ethylene oxide-b-propylene oxide-b-ethylene oxide)triblock copolymer

Thermosetting systems based on DGEBA epoxy resin and poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) (EPE) triblock copolymer were prepared and investigated. Different mixtures were obtained by using different contents of EPE block copolymer in order to study the influence of the modifier on the properties of the final materials. All thermosetting systems were prepared without using any solvent and were cured at ambient temperature, taking into account the lower critical solution temperature (LCST) behavior of the block copolymer. DSC results indicated that the addition of block copolymer affected to the curing reaction time and to the glass transition temperature of the mixtures and also the miscibility of EPE triblock copolymer in the epoxy resin was proved. The morphologies studied by AFM and TEM showed clear nanostructuration up to 25 wt % EPE content. The addition of 5 and 15 wt % of EPE block copolymer led to a considerable improvement in the toughness of the materials. When EPE block copolymer was added to the epoxy resin, the surface became more hydrophilic and the UV–vis transmittance decreased slightly maintaining a high level of transparency.