Synthesis and properties of polyacetylenes having pendent phenylethynylcarbazolyl groups

Novel acetylene monomers substituted with phenylethynylcarbazolyl groups, 3-[(4-octylphenyl)ethynyl]-9-propargylcarbazole (1), 3,6-bis[(4-octylphenyl)ethynyl]-9-propargylcarbazole (2), 9-(4-ethynylphenyl)-3-[(4-octylphenyl)ethynyl]carbazole (3), and 9-(4-ethynylphenyl)-3,6-bis[(4-octylphenyl)ethynyl]carbazole (4) were synthesized, and polymerized with Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃] and WCl₆-n-Bu₄Sn catalysts. The corresponding polyacetylenes with number-average molecular weights ranging from 9200 to 94?000 were obtained in 20-98% yields. The IR spectra of the polymers revealed that acetylene polymerization took place at the terminal ethynyl group, while the ethynylene group remained intact. The UV-vis absorption band edge wavelengths of W-based poly(3) and poly(4) were longer than those of the other polymers. W-Based poly(4) emitted fluorescence with the highest quantum yield (41%). Poly(1) exhibited excimer-based fluorescence in dilute solution.     

Synthesis and properties of polyacetylenes carrying N-phenylcarbazole and triphenylamine moieties

Novel acetylene monomers containing N-phenyl-substituted carbazole (Cz) and triphenylamine (TPA) groups, namely, 3-ethynyl-9-phenylcarbazole (1) and p-(N,N-diphenylamino)phenylacetylene (2) were synthesized, and polymerized with several Rh-, W-, and Mo-based catalysts. Poly(1) and poly(2) with high number-average molecular weights (15?500-974?000) were obtained in good yields (77-97%), when [(nbd)RhCl]₂-Et₃N (nbd = norbornadiene) was used as a catalyst. The polymers exhibited UV-vis absorption peaks derived from the Cz and TPA moieties at 250-350 nm and polyacetylene backbone above 350 nm. The UV-vis absorption band edge wavelengths of the polymers were longer than those of the corresponding monomers. Poly(2) exhibited a UV-vis absorption peak at a longer wavelength than poly(1) did, which indicates that poly(2) has main chain conjugation longer than that of poly(1). The molecular weights and photoluminescence quantum yields of the polymers obtained by the polymerization using [(nbd)RhCl]₂-Et₃N were larger than those of the Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃]-based counterparts. The cyclic voltammograms of the polymers indicated that they had clear electrochemical properties; the onset oxidation voltage of poly(1) was higher than those of N-alkyl-substituted Cz derivatives. The polymers showed electrochromism and changed the color from pale yellow to blue by application of voltage, presumably caused by the formation of charged polaron at the Cz and TPA moieties. The temperatures for 5% weight loss of the polymers were around 350-420 °C under air, indicating the high thermal stability.     

Homo- and R/S-copolymerizations of chiral methylpropargyl esters carrying pyrene moieties, and optical properties of the formed polymers

Pyrene-functionalized chiral methylpropargyl esters, (R)-3-butyn-2-yl-1-pyrenebutyrate [(R)-1], (S)-3-butyn-2-yl-1-pyrenebutyrate [(S)-1], (R)-3-butyn-2-yl-1-pyrenecarboxylate [(R)-2], and 3-butyn-2-yl-1-pyrenecarboxylate [(R,S)-2] were polymerized with (nbd)Rh⁺[η⁶-C₆H₅B⁻(C₆H₅)₃] to obtain the corresponding polymers with moderate molecular weights (M_n: 10?500-66?500) in good yields (82-97%). All the polymers were soluble in CHCl₃, CH₂Cl₂, and THF. The polarimetric and CD spectroscopic data indicated that poly[(R)-1], poly[(S)-1], and poly[(R)-2] existed in a helical structure with predominantly one-handed screw sense in these solvents. The helical structure of poly[(R)-1] and poly[(S)-1] was stable upon heating and addition of MeOH, while that of poly[(R)-2] changed upon MeOH addition. The copolymerization of (R)-1 with (S)-1 was also conducted to obtain the copolymers satisfactorily. Poly[(R)-1], poly[(S)-1], and poly[(R)-2] emitted fluorescence smaller than the corresponding racemic copolymers. The fluorescence intensity was tuned by the addition of MeOH to THF solutions of the polymers.     

Synthesis and electro-optical properties of helical polyacetylenes carrying carbazole and triphenylamine moieties

Novel chiral acetylene monomers bearing carbazole and triphenylamine groups, namely, (S)-3-butyn-2-yl 2-(9-carbazolyl)ethyl carbonate (1) and (S)-3-butyn-2-yl 4-(diphenylamino)benzoate (2) were synthesized, and polymerized with Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃] catalyst to give the corresponding polymers with moderate molecular weights (M_n 13.0 × 10³ and 15.5 × 10³) in good yields (86% and 88%). CD spectroscopic studies revealed that poly(1) and poly(2) took predominantly one-handed helical structure in CHCl₃. The helical structures of poly(1) and poly(2) were very stable against heating and addition of MeOH. The solution of poly(1) and poly(2) emitted fluorescence in 0.52% and 7.2% quantum yields, which were lower than those of the corresponding monomers 1 and 2 (22.5% and 76.5%). The cyclic voltammograms of the polymers indicated that the oxidation potentials of the polymers were lower than those of the monomers. The polymers showed electrochromism and changed the color from pale yellow to pale blue by application of voltage, presumably caused by the formation of polaron at the carbazole and triphenylamine moieties. The onset temperatures of weight loss of poly(1) and poly(2) were 225 and 270 °C under air.     

Synthesis, characterization, and high gas permeability of poly(diarylacetylene)s having fluorenyl groups

Diarylacetylenes having fluorenyl groups and other substituents (trimethylsilyl, t-butyl, bromine, fluorine) (1a-1) were polymerized with TaCl₅-n-Bu₄Sn. Monomers 1a-l produced high molecular weight polymers 2a-l (M_w 5.1 × 10⁵-1.3 × 10⁶) in 12-59% yields. All of the polymers were soluble in common organic solvents, and gave tough free-standing membranes by the solution casting method. The onset temperatures of weight loss of polymers 2a-l in air were over 400 °C, indicating considerably high thermal stability. All the polymer membranes showed high gas permeability; e.g., the oxygen permeability coefficient (PO₂) of 2a was as large as 4800 barrers. Membrane 2d possessing two fluorine atoms at meta and para positions of the phenyl ring showed the highest oxygen permeability (PO₂ = 6600 barrers) among the present polymers.     

Norbornene polymerization and ethylene/norbornene copolymerization catalyzed by constrained geometry cyclopentadienyl-phenoxytitanium catalysts

Norbornene polymerization and ethylene/norbornene copolymerization were studied using constrained geometry complexes 2-(tetramethylcyclopentadienyl)-4,6-di-tert-butylphenoxytitanium dichloride (1), 2-(tetramethylcyclopentadienyl)-6-tert-butylphenoxytitanium dichloride (2), and 2-(tetramethylcyclopentadienyl)-6-phenylphenoxytitanium dichloride (3) as catalysts with AlⁱBu₃ and Ph₃CB(C₆F₅)₄ as cocatalysts. Polymerization results indicate that these catalyst systems are highly active for both the homopolymerization of norbornene and the copolymerization of ethylene with norbornene. The norbornene homopolymerization is vinyl addition polymerization. Ethylene/norbornene copolymers with high norbornene incorporation (>50%) were easily obtained with these catalyst systems by increasing the norbornene feed concentration. The produced polymers were characterized by ¹³C NMR, IR, DSC and GPC.     

Synthesis and properties of pyrene-functionalized polyacetylene. A stable helical polymer emitting fluorescence

Pyrene-functionalized chiral N-propargylamide, (R)-HC≡CCH₂NHCOCH(CH₃)O-1,4-C₆H₄-OCO(CH₂)₃-1-pyrenyl (1) was polymerized with (nbd)Rh⁺[η⁶-C₆H₅B⁻(C₆H₅)₃] as a catalyst to obtain the corresponding polymer with a moderate weight in a good yield. Poly(1) was soluble in CHCl₃, CH₂Cl₂, and THF. The polarimetric and CD spectroscopic data indicated that poly(1) existed in a helical structure with predominantly one-handed screw sense in these solvents. The helical structure was stable upon heating and addition of MeOH. Poly(1) showed very large excimer-based fluorescence compared with 1.     

Ring-opening polymerization of lactide initiated by magnesium and zinc alkoxides

A mono methylether Salen-type ligand, SalenMe-H (1) is prepared in a one flask reaction by condensation of trans-1,2-diaminocyclohexane with 2-methoxybenzenaldehyde and followed by the addition of 2,4-di-tert-butylsalicylaldehyde. Further reaction of 1 with Mg(OBn)₂ in THF produces a magnesium alkoxide, [(SalenMe)Mg(OBn)]₂ (2). Compound 1 reacts with ZnEt₂ yields monomeric complex (SalenMe)ZnEt (3), which further reacts with 1 molar equiv of benzyl alcohol giving [(SalenMe)Zn(OBn)]₂ (4). Experimental results show that complexes 2 and 4 efficiently initiate the ring-opening polymerization of l-lactide and rac-lactide in a controlled fashion, yielding polymers with very low polydispersity indexes. Kinetic studies show a second-order dependency on [LA] and a first-order on [2] with magnesium complex 2 as an initiator. While zinc complex 4 is used as an initiator, the polymerization rate has a first order dependency on both [LA] and [4].     

Synthesis and electrochromic properties of aromatic polyimides bearing pendent triphenylamine units

A series of aromatic polyimides with pendent triphenylamine group were synthesized from equimolar mixtures of 4,4′-oxydianiline (ODA) and 4-(3,5-diaminobenzamido)triphenylamine (4), 4-(3,5-diaminobenzamido)-4′,4″-di-tert-butyltriphenylamine (t-Bu-4) or 4-(3,5-diaminobenzamido)-4′,4″-dimethoxytriphenylamine (MeO-4) with two aromatic tetracarboxylic dianhydrides (DSDA or 6FDA) via a conventional two-step procedure that included a ring-opening polyaddition to give poly(amic acid)s, followed by chemical imidization. These polyimides exhibited good solubility in polar organic solvents and could be solution-cast into flexible and strong films. They showed excellent thermal stability, with T_g values in the range of 284–309 °C. The polyimides derived from diamines t-Bu-4 and MeO-4 exhibited reversible electrochemical oxidation, accompanied by strong color changes with high contrast ratio and electrochromic stability. For the polyimides derived from diamine 4, the coupling reaction between the triphenylamine radical cations occurred during the oxidative process forming a tetraphenylbenzidine structure, which resulted in an additional oxidation state and color change together with enhanced near-IR absorption at fully oxidized state.     

Synthesis of poly(1-β-naphthyl-2-phenylacetylene) membranes through desilylation and their properties

The polymerization of 1-β-naphthyl-2-[(p-trimethylsilyl)phenyl]acetylene (8a) with TaCl₅-n-Bu₄Sn in cyclohexane provided a high molecular weight polymer (9a) (M_w=3.4×10⁶). The corresponding monomers having p-dimethyl-t-butylsilyl and p-dimethyl(10-pinanyl)silyl groups in place of p-trimethylsilyl group in 8a also polymerized in a similar way to give high molecular weight polymers (9b, 9c, respectively; M_w>1×10⁶). All these polymers were soluble in many common solvents such as toluene and chloroform, and provided free-standing membranes by casting from toluene solution. The oxygen permeability coefficients (P_O2) of 9a at 25 °C was as high as 3500 barrers. The membrane of poly(1-β-naphthyl-2-phenylacetylene) (10a) was prepared by desilylation of the membrane of 9a with trifluoroacetic acid. Polymer 10a was insoluble in any solvents, and showed high thermal stability (the onset temperature of weight loss in air ∼470 °C). The P_O2 value of 10a reached 4300 barrers. Not only the membrane of 9c but also its desilylation product 10c exhibited large optical rotations ([α]_D=+2924 and +9800°, respectively) and strong CD signals. This indicates that the membrane of 10c maintains the helical main chain conformation of 9c with a large excess one-handed helix sense.     

Preparation and properties of polytolan membranes bearing p-hydroxyl groups

The polymerization of a novel monomer p-(t-butyldimethylsiloxy)tolan (1) with TaCl₅-n-Bu₄Sn provided a high molecular weight polymer (poly(1)), whose M_w reached 4.0×10⁶. The poly(1) membrane was prepared by the casting method, and converted into poly[(p-hydroxy)tolan] (poly(2)) with a mixture of trifluoroacetic acid/water. Whereas poly(1) dissolved in low polarity solvents such as toluene and chloroform, poly(2) was practically insoluble in any solvents, although it partly dissolved in methanol and ethanol. The onset weight loss temperatures of poly(1) and poly(2) in air were 320 and 360 °C, respectively, indicating fair thermal stability among substituted polyacetylenes. The oxygen permeability coefficients (P_O2) of poly(1) was 150 barrers, which is relatively small among polytolan derivatives, while that of poly(2) was 8.0 barrers and smaller owing to the presence of polar hydroxyl groups.     

Thermal and Fluorescence Properties of New Nanostructured Hg(ll) -2,2′-Bipyridine Derivative Complexes

Two new nano-structured Hg(II) supramolecular complexes, [Hg(5,5′-di-t-but-bpy)(μ-Br)Br]₂[Hg(5,5′-di-t-but-bpy)Br₂](1) and [Hg(5,5′-di-t-but-bpy)I₂] (2) were synthesized by the sonochemical method. The structures of 1 and 2 were characterized by elemental analysis, IR, ¹H-NMR, and ¹³C-NMR spectroscopy and single crystal X-ray diffraction. Their thermal stabilities were studied by thermogravimetric and differential thermal analyses. Solid-state luminescent spectra of 1 and 2 indicate a fluorescent broad emission band between 304 and 404 nm with excitation at 284 nm. These nanostructured coordination polymers were characterized by scanning electron microscopy, elemental analysis, and IR spectroscopy.     

Pd-catalyzed hydrosilylation polymerization of a dihydrosilane with diyne/triyne mixed systems affording crosslinked silylene-divinylene polymers and their properties

Treatment of a dihydrosilane (methylphenylsilane, 1) with mixtures of a diyne (p- or m-diethynylbenzene, 2a or 2b) and a triyne (1,3,5-triethynylbenzene, 3a or B,B′,B″-triethynyl-N,N′,N″-trimethylborazine, 3b; 1:2:3=100:95:5, 100:90:10, 100:80:20) in the presence of Pd-PCy₃ (Cy=cyclohexyl) catalyst gave new crosslinked silylenedivinylene polycarbosilanes. In TGA the resulting crosslinked polymers tended to show higher Td₅ values and higher char yields than the corresponding linear polymers. On the other hand, UV/vis absorption spectra of the crosslinked polymers obtained in the reactions of 2a or 2b with 3a exhibited increased broad peaks around 390 nm for 2a or 360 nm for 2b. Coincidently, their fluorescence spectra showed significant increase of the emission peaks in 400-550 nm. The crosslinked polymer derived from 2a and 3b, however, showed decrease of the absorption peak around 390 nm and profound depression of fluorescence peaks in 400-550 nm.     

Synthesis of hydroxyphenylglycine-derived novel poly(silylenevinylenephenyleneethynylene)s

The hydrosilylation polymerization of d-(−)-p-hydroxyphenylglycine-derived diethynyl monomers 1p and 1m with dihydrosilanes Si1 and Si2 was carried out using RhI(PPh₃)₃ as a catalyst to give optically active novel poly(silylenevinylenephenyleneethynylene)s [(E)-poly(1p-Si1), (E)-poly(1p-Si2), (E)-poly(1m-Si1), (E)-poly(1m-Si2), and (Z)-poly(1p-Si1)] with number-average molecular weights ranging from 2800 to 17,000 in 41-92% yields. Polymers having (E)- and (Z)-olefin moieties were obtained, wherein the (E)-/(Z)-ratios depended on the reaction conditions. The UV-vis absorption edge of (E)-poly(1p-Si1) was positioned at a wavelength longer than that of (Z)-poly(1p-Si1), indicating that (E)-vinylene-linkage extends the conjugation more largely than the (Z)-counterpart. This was also confirmed by fluorescence spectroscopy. Alkaline hydrolysis of ester moieties of these polymers gave the corresponding polymers having carboxy groups. The (E)-polymers showed different solubility in hydrophobic solvents before and after hydrolysis, but the non-hydrolyzed and hydrolyzed (Z)-polymers exhibited the same solubility.     

Synthesis and properties of helical polyacetylenes containing carbazole

Novel acetylene monomers containing carbazole with chiral menthyl and bornyl groups, 9-(1R,2S,5R)-menthyloxycarbonyl-2-ethynylcarbazole (1), 9-(1S,2R,5S)-menthyloxycarbonyl-2-ethynylcarbazole (2), 9-(1R,2S,5R)-menthyloxycarbonyl-3-ethynylcarbazole (3) and 9-(1S)-bornyloxycarbonyl-2-ethynylcarbazole (4) were synthesized and polymerized with a Rh catalyst to give the corresponding polymers [poly(1)-poly(4)] with moderate M_n value of (11.5-92.2) × 10³ in good yields (77-89%). CD spectroscopic studies revealed that poly(1), poly(2) and poly(4) took predominantly one-handed helical structure in CHCl₃, THF, toluene, and CH₂Cl₂, while poly(3) did not. Addition of methanol to CHCl₃ solutions of poly(1) and poly(2) resulted in the formation of aggregates showing smaller CD signals at 275 and 320 nm. The helical structure of poly(1) and poly(2) was very stable against heating. The polymers emitted fluorescence in 0.40-2.90% quantum yields. Poly(4) exhibited an obvious oxidation peak at 1.10 V. The polymers were thermally stable below 300 °C.     

Synthesis of novel poly(diphenylacetylene)s with both trimethylsilyl and alkyl groups: The effect of desilylation on gas permeability

Diphenylacetylenes having both a trimethylsilyl group and an alkyl group at para positions [Me₃SiC₆H₄CCC₆H₄R; R = Et (1a), n-Bu (1b), t-Bu (1c), n-C₈H₁₇ (1d)] and having only an alkyl group [PhCCC₆H₄R; R = n-Bu (1B), n-C₈H₁₇ (1D)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2D). The formed polymers except 2c afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of the Si-containing polymer membranes (2a, 2b, 2d) was carried out with trifluoroacetic acid, and the desilylated polymer membranes (3a, 3b, 3d) were obtained. The permeability to O₂, N₂, and CO₂ were determined for the obtained polymer membranes. All the desilylated membranes showed lower gas permeability than the Si-containing counterparts. To clarify the effects of the desilylation further, CO₂ diffusivity, CO₂ solubility, and fractional free volume (FFV) of the polymer membranes were investigated. The FFV and CO₂ diffusivity decreased upon desilylation, while CO₂ solubility hardly varied.     

Copolymerization of propylene and norbornene with different metallocene catalysts

Propylene and norbornene were copolymerized by metallocene/MAO catalysts. The organometallic compounds rac-[Me₂C(Ind)₂]ZrCl₂ (1) and [Me₂C(Cp)(Flu)]ZrCl₂ (2), [Ph₂C(Cp)(2,7-di^tBuFlu)]ZrCl₂ (3) and [Me₂Si(3-^tBuCp)(N^tBu)]TiCl₂ (4) were used to catalyze polymerization series, in which the influence of the molar fraction of norbornene in the feed and of the polymerization temperature were investigated in detail. The obtained polymers, which exhibit a wide range of properties with glass transition temperatures above 200 °C, were characterized by ¹³C NMR spectroscopy, differential scanning calorimetry and gel permeation chromatography techniques.In this article, the emphasis is placed on the copolymerization behaviour of the catalysts and the properties of the obtained polymers, while other articles concentrate on NMR investigations of propylene/norbornene copolymers.     

Polybinaphthyls incorporating chiral 2,2′-binaphthyl and isoquinoline moieties by Sonogashira reaction

Polymers P-1, P-2, P-3, P-4 and P-5 were synthesized by the polymerization of 5,8-bis(ethynyl)isoquinoline (M-1) with (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-2), (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-2), (R)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-3), (S)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-3), and rac-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl (M-4) under Sonogashira reaction, respectively. Both monomers and polymers were analyzed by NMR, MS, FT-IR, UV-vis spectroscopy, DSC-TGA, fluorescence spectroscopy, GPC and circular dichroism (CD) spectroscopy. CD spectra of polymers P-1 and P-2, P-3 and P-4 are almost identical except that they gave opposite signals at each wavelength. The long wavelength CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and the helical backbone in the polymer chain. All five polymers have strong blue-green fluorescence due to the efficient energy migration from the extended π-electronic structure of the repeating unit of the polymers to the chiral binaphthyl core and are expected to provide understanding of structure-property relationships of the chiral conjugated polymers.     

Bridge length effect of new dinuclear constrained geometry catalysts on controlling the polymerization behaviors of ethylene/styrene copolymerization

According to the observable evidence from ¹H and ¹³C nuclear magnetic resonance and mass spectrometry, new dinuclear constrained geometry catalysts (DCGCs) with a structure of [{Ti(η⁵:η¹-(C₉H₅)Si(CH₃)₂N^tBu)Cl₂(CH₂)_n}₂(C₆H₄)] [n = 0 (10), n = 1 (11), n = 2 (12)] were synthesized successfully. Copolymerization of ethylene and styrene were tested by using three new DCGCs and Dow CGC. The catalyst activity, the molecular weight (MW) and styrene content of the copolymers were sharply improved as the bridge structure was transformed from para-phenyl (10) to para-xylyl (11) and para-diethylenephenyl (12). The activity of 11 and 12 was about four to five times greater than that of 10 regardless of the polymerization conditions. In addition, the capability to form high MW polymers increased in the order of Dow CGC ≈ 10 < 11 < 12. The styrene contents in copolymers generated by 11 and 12 were higher than those of 10.