Synthesis, characterization and evaluation of amphiphilic star copolymeric emulsifiers based on methoxy hexa(ethylene glycol) methacrylate and benzyl methacrylate

Amphiphilic star copolymers were synthesized by sequential monomer and cross-linker additions using group transfer polymerization (GTP). Benzyl methacrylate (BzMA) and methoxy hexa(ethylene glycol) methacrylate (HEGMA) served as the hydrophobic and hydrophilic monomers, respectively, whereas the also hydrophobic ethylene glycol dimethacrylate (EGDMA) was used as the cross-linker. In total, twelve star copolymers were prepared, covering three different overall hydrophobic compositions, 39, 53 and 70% w/w, and four different architectures, AB star-block, BA star-block, heteroarm star and random star. The theoretical molecular weight of each arm was kept constant at 5000 g mol⁻¹. The molecular weights and molecular weight distributions of the linear precursors and of all the star copolymers were characterized by gel permeation chromatography (GPC) in tetrahydrofuran (THF), while their compositions were confirmed by proton nuclear magnetic resonance (¹H NMR) spectroscopy. Moreover, all the star copolymers were characterized by static light scattering (SLS) in THF to determine the absolute weight-average molecular weight, M_w, and the weight-average number of arms. After polymer characterization, xylene-water and diazinon (pesticide)-water emulsions were prepared using these star copolymers as stabilizers at 1% w/w copolymer concentration and at different overall organic phase/water ratios. The most important factor in determining the emulsion type was the star copolymer composition in hydrophobic units. The four most hydrophilic star copolymers (39% w/w hydrophobic composition) always formed o/w emulsions, while the four most hydrophobic star copolymers (70% w/w hydrophobic composition) always formed w/o emulsions. The type of the emulsion in the case of the star copolymers with the more balanced composition, 53% w/w hydrophobic units, also depended on the emulsion content in the organic solvent, similar to particulate-stabilized emulsions. Considering that the best o/w emulsifier is that star copolymer which can emulsify the largest quantity of organic phase in water resulting in low viscosity, o/w emulsions without excess oil or water phase, it appeared that the most hydrophilic random copolymer star is the optimal emulsifier. Moreover, this star copolymer presented the smallest droplet size in its emulsions. It is also noteworthy that the resulting emulsions almost never had high viscosity, a feature attributable to the compact nature of star polymers.     

Synthesis and characterization of perfluorocyclobutyl aryl ether-based amphiphilic diblock copolymer

Perfluorocyclobutyl aryl ether-based amphiphilic diblock copolymer containing hydrophilic poly(ethylene glycol) segment was synthesized by atom transfer radical polymerization (ATRP). Perfluorocyclobutyl-containing methacrylate-based monomer, 4-(4′-p-tolyloxyperfluorocyclobutoxy)benzyl methacrylate, was prepared firstly, which can be polymerized by ATRP in a controlled way to obtain well-defined homopolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.30). The molecular weights increased linearly with the conversions of monomer and the apparent polymerization rate exhibited first-order relation with respect to the concentration of monomer. ATRP of 4-(4′-p-tolyloxyperfluorocyclobutoxy)benzyl methacrylate was initiated by PEG-based macroinitiators with different molecular weights to obtain amphiphilic diblock copolymers with narrow molecular weight distributions (M_w/M_n < 1.35) and the number of perfluorocyclobutyl linkage can be tuned by the feed ratio and the conversion of the fluorine-containing methacrylate monomer. The critical micelle concentrations of these amphiphilic diblock copolymers in water and brine were determined by fluorescence probe technique. The morphologies of the micelles were found to be spheres by TEM.     

Amphiphilic diblock and ABC triblock methacrylate copolymers: synthesis and aqueous solution characterization

Three isomeric, linear, equimolar, amphiphilic ABC triblock copolymers comprising methyl methacrylate (MMA, nonionic hydrophobic), 2-(dimethylamino)ethyl methacrylate, (DMAEMA, ionizable hydrophilic) and hexa(ethylene glycol) methacrylate (HEGMA, nonionic hydrophilic) units (10 units in each block) were synthesized by group transfer polymerization (GTP). These were the three block sequence isomers, ABC, ACB and BAC. The corresponding random terpolymer was also prepared. The molecular weights and compositions of all the polymers were characterized by GPC and ¹H NMR. Measurements of the hydrodynamic diameters and cloud points of the copolymers in aqueous solution suggest that the various distributions of monomer units in the four terpolymers (the three triblocks and the random) result in different supramolecular structures with different colloidal stabilities.     

The equilibrium water content of some thermoplastic hydroxyalkyl methacrylate polymers

The equilibrium water content (EWC) of thermoplastic 2-hydroxypropyl methacrylate and 2-hydroxyethyl methacrylate homopolymers from technical grade monomer and of copolymers of the latter with methyl methacrylate has been measured in distilled water and in phosphate-buffered saline (PBS). In distilled water, as expected, EWCs increased monotonically with the proportion of hydrophilic monomer in the polymer and showed only a small dependence on molecular weight. In contrast, the degree of swelling (and in some cases dissolution) and “freezable” water content of polymers in PBS were shown to be anomalously high and to be a consequence of ionization at pH 7.4 of methacrylic acid incorporated into the polymer in small quantity (< 1 mol %) as an impurity. Initial studies indicated a strong relationship between copolymer molecular weight and small molecule permeability in distilled water.     

Synthesis and aqueous solution characterization of amphiphilic diblock copolymers containing carbazole

A series of near-monodisperse diblock copolymers of 2-(N-carbazolyl)ethyl methacrylate and 2-(dimethylamino)ethyl methacrylate (DMAEMA) of relatively low molecular weights (2600-24,000 g mol⁻¹) were synthesized by group transfer polymerization using tetrahydrofuran (THF) as a solvent. The molecular weight distributions and compositions of all the copolymers were obtained using gel permeation chromatography (GPC) in THF and proton nuclear magnetic resonance (¹H NMR) spectroscopy, respectively. Differential scanning calorimetry and thermal gravimetric analysis provided low glass transition temperatures (T_gs) of about 60 °C and decomposition temperatures between 320 and 450 °C for the copolymers, respectively. The three copolymers with the highest DMAEMA content were water-soluble below pH 7. Aqueous GPC at pH 3 showed that the water-soluble block copolymers formed micelles with apparent number average molecular weights above 100,000 g mol⁻¹.     

Atom transfer radical copolymerization of glycidyl methacrylate and methyl methacrylate

Glycidyl methacrylate (GMA) and methyl methacrylate (MMA) copolymers were synthesized by atom transfer radical polymerization (ATRP). The effect of different molar fractions of GMA, ranging from 0.28 to 1.0, on the polymer polydispersity index (weight‐average molecular weight/number‐average molecular weight) as the indicator of a controlled process was investigated at 70°C, with ethyl 2‐bromoisobutyrate as an initiator and 4,4′‐dinonyl‐2,2′‐bipyridyne (dNbpy)/CuBr as a catalyst system in anisole. The monomer reactivity ratios (r values) were obtained by the application of the conventional linearization Fineman–Ross method (r_GMA = 1.24 ± 0.02 and r_MMA = 0.85 ± 0.03) and by the Mayo–Lewis method (r_GMA = 1.19 ± 0.04 and r_MMA = 0.86 ± 0.03). The molecular weights and polydispersities of the copolymers exhibited a linear increase with GMA content. The copolymer compositions were determined by ¹H‐NMR and showed a domination of syndiotactic structures. The glass‐transition temperatures (T_g) of the copolymers analyzed by differential scanning calorimetry (DSC) decreased in the range 105–65°C with increasing GMA units. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Group transfer polymerization and its use in water based pigment dispersants and emulsion stabilizers

Group transfer polymerization (GTP) can be used to make AB diblock acrylic polymers. It provides excellent control of the structure of these polymers. With a hydrophilic B block, these polymers have been used to prepare water based emulsions, pigment dispersions, and slurries. These systems have property advantages over emulsions and dispersions made with conventional stabilizers. These advantages include increased stability, smaller particle sizes, lower viscosities, and less moisture sensitivity. The structure of the AB diblock polymer affects the properties of both the pigment dispersion and the emulsion particle. The composition, size and ratio of each block affect the overall quality. For aqueous systems, a balance of hydrophobic ‘A’ blocks and very hydrophilic ‘B’ blocks is needed for optimum properties. The hydrophobic ‘A’ blocks, which are homo or copolymers of methacrylate monomers (such as butyl or ethylhexyl methacrylate), are surface active and can associate with either pigment or emulsion polymer surfaces. The hydrophilic ‘B’ blocks, which are neutralized acid or amine containing copolymers, provide both ionic as well as steric stabilization in water-borne systems.     

Preparation and self-assembly of double hydrophilic poly(ethylethylene phosphate)-block-poly[2-(succinyloxy)ethyl methacrylate] diblock copolymers for drug delivery

This work focuses on the synthesis and self-assembly of biodegradable and anionic double hydrophilic diblock copolymers (DHBCs) poly(ethylethylene phosphate)-block-poly[2-(succinyloxy)ethyl methacrylate] (PEEP-b-PSEMA) with different molecular weights and compositions, which were prepared via a combination of ring opening polymerization (ROP), atom transfer radical polymerization (ATRP) and polymer reaction. The chemical structures of these well-defined diblock copolymers were confirmed by ¹H NMR and FT-IR analyses. GPC results indicated that the copolymers showed symmetric peak and relatively narrow polydispersities. Subsequently, pH-responsive micellization behaviors of PEEP-b-PSEMA diblock copolymers were investigated by fluorescence probe method, dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements. The results demonstrated that these diblock copolymers were able to self-assemble into micelles with various sizes depending on the variation of pH values. Naproxen (NAP), a poorly water-soluble drug, was selected as the model drug and encapsulated into the core of micelles via dialysis method. The in vitro release behavior of NAP from these micelles was pH-dependent and could be accelerated in the presence of phosphodiesterase I which could promote the degradation of polyphosphoesters. Cytotoxicity tests by MTT assay showed that these block copolymers possessed favorable biocompatibility against HeLa cells, revealing that this kind of biodegradable, biocompatible and pH-responsive block copolymer would be served as a promising material for drug delivery.     

Well-defined poly(2-hydroxyethyl methacrylate) and its amphiphilic block copolymers via acidolysis of anionically synthesized poly(2-vinyloxyethyl methacrylate)

Summary A novel approach to a well-defined poly(2-hydroxyethyl methacrylate) [poly(HEMA)] and to its amphiphilic block copolymers was developed. The selective living anionic polymerization of the methacryloyl group of the bifunctional monomer 2-vinyloxyethyl methacrylate (VEMA) generated a functional polymer with a controlled molecular weight and a narrow molecular weight distribution (M_w/M_n= 1.05–1.09). This polymer is very stable under normal conditions. Being soluble in the common organic solvents, its characterization could be carried out easily. The unreacted vinyl groups in the side chains of the resulting polymer were further reacted with hydrochloric acid. This acidolysis changed poly(VEMA) to a well-defined poly(HEMA). In addition, the anionic block copolymerization of VEMA with styrene or methyl methacrylate also proceeded smoothly, generating the corresponding block copolymers. After acidolysis, these copolymers were turned into amphiphilic block copolymers containing a hydrophilic poly(HEMA) block. Received: 22 June 2001/Revised version: 15 August 2001/Accepted: 15 August 2001     

Synthesis,characterization and thermal degradation of dual temperature‐ and pH‐sensitive RAFT‐made copolymers of N,N‐(dimethylamino)ethyl methacrylate and methyl methacrylate

Poly{[(N,N‐(dimethylamino)ethyl methacrylate]‐co‐(methyl methacrylate)} copolymers of various compositions were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization at 70 °C in N,N‐dimethylformamide. The polymer molecular weights and molecular weight distributions were obtained from size exclusion chromatography, and they indicated the controlled nature of the RAFT polymerizations; the polydispersity indices are in the range 1.1–1.3. The reactivity ratios of N,N‐(dimethylamino)ethyl methacrylate (DMAEMA) and methyl methacrylate (MMA) (r_DMAEMA = 0.925 and r_MMA = 0.854) were computed by the extended Kelen–Tüdös method at high conversions, using compositions obtained from ¹H NMR. The pH‐ and temperature‐sensitive behaviour were studied in aqueous solution to confirm dual responsiveness of these copolymers. The thermal properties of the copolymers with various compositions were investigated by differential scanning calorimetry and thermogravimetric analysis. The kinetics of thermal degradation were determined by Friedmann and Chang techniques to evaluate various parameters such as the activation energy, the order and the frequency factor. © 2012 Society of Chemical Industry     

Synthesis of novel random and block copolymers of tert-butyldimethylsilyl methacrylate and methyl methacrylate by RAFT polymerization

Hydrophobic-hydrolysable copolymers consisting of methyl methacrylate (MMA) and tert-butyldimethylsilyl methacrylate (TBDMSMA) have been synthesized for the first time by Reversible Addition-Fragmentation chain Transfer (RAFT) polymerization technique using cumyl dithiobenzoate (CDB) and cyanoisopropyl dithiobenzoate (CPDB) as chain transfer agents (CTAs). The monomer reactivity ratios for TBDMSMA (r₁ = 1.40 ± 0.03) and MMA (r₂ = 1.08 ± 0.03) have been determined using a non-linear least-squares fitting method. Well-defined random copolymers PMMA-co-PTBDMSMA have been prepared. Then, the versatility of the RAFT process to synthesize silylated block copolymers with controlled molecular weights and low polydispersities has been demonstrated using two strategies: the synthesis of PMMA-SC(S)Ph or PTBDMSMA-SC(S)Ph as macro-chain transfer agent (macro-CTA) for use in a two step method or an one-pot method which consists in the successive addition of the two monomers. Diblock copolymers with narrow molecular weight distributions (PDI < 1.2) were obtained from the one-pot method with number-average molecular weight values within the range 10,000-22,000 g mol⁻¹.     

High porosity,responsive hydrogel copolymers from emulsion templating

Hydrogels, three‐dimensional hydrophilic polymer network structures, can absorb many times their dry weight in water. PolyHIPEs are highly porous polymers synthesized within high internal phase emulsions (HIPEs). Here, the water uptakes in novel hydrogel polyHIPE copolymers of hydroxyethyl methacrylate (HEMA, a non‐ionic monomer) and methacrylic acid (MAA, an ionic monomer) were investigated. The PHEMA‐based polyHIPE had a density of 0.14 g cm^?3, void diameters of 50–100 µm and a void‐dominated Fickian water uptake of around 10.4 g g^?1. The polyHIPE density increased, and the porous structure became less polyHIPE‐like, with increasing MAA content, reflecting a reduction in the stability of the HIPE. The water uptake increased with increasing pH for all the copolymers and the water absorption mechanism changed from Fickian at pH 2 to anomalous, dominantly case II, at pH 10. The maximum uptake of 18.2 g g^?1 at pH 10, for a HEMA to MAA mass ratio of 1/1, was ascribed to hydrogel‐swelling‐driven void expansion. The hydrogel's absorptive and responsive properties were amplified by the polyHIPE's porous structure. These results demonstrate that the compositions of hydrogel polyHIPE copolymers can be designed to enhance their water uptake. © 2015 Society of Chemical Industry     

Thermal stability of poly(styrene-b-methyl methacrylate) and poly(styrene-b-ethylene-co-1-butene-b-methyl methacrylate)

Summary The thermal stability of poly(styrene-b-methyl methacrylate) diblock copolymers (= P(S-b-MMA)) and poly(styrene-b-ethylene-co-1-butene-b-methyl methacrylate) triblock copolymers (=P(S-b-EB-b-MMA)) was investigated. Well-defined high molecular weight block copolymers with narrow molecular weight distribution (MWD) were molded at different temperatures in vacuum and the alteration of the MWD was sensitively monitored by gel permeation chromatography (GPC). Up to 240°C P(S-b-MMA) shows almost no broadening of the MWD. At higher temperatures low molecular weight polystyrene-rich portions are formed. The number average molecular weight (M_n) is strongly reduced. P(S-b-EB-b-MMA) triblock copolymers show broadening of the MWD to higher and lower molecular weights at elevated temperatures, probably caused by chain scission and linking reactions of the EB block. M_n remains approximately constant. Up to 240°C the broadening of the MWD is not very pronounced. In comparison to unhydrogenated P(S-b-B-b-MMA) triblock copolymers, the thermal stability of P(S-b-EB-b-MMA) is greatly enhanced.     

Using hydroxypropyl‐β‐cyclodextrin for the preparation of hydrophobic poly(ketoethyl methacrylate) in aqueous medium

This work was committed to the polymerization of hydrophobic ketoethyl methacrylate monomer in aqueous medium in the presence of cyclodextrin, instead of polymerizing the monomer in toxic and volatile organic solvents. For this purpose, a new ketoethyl methacrylate monomer, p‐methylphenacylmethacrylate (MPMA), was synthesized from the reaction of p‐methylphenacylbromide with sodium methacrylate in the presence of triethylbenzylammonium chloride. The monomer was identified with FTIR, ¹H and ¹³C‐NMR spectroscopies. Hydroxypropyl‐β‐cyclodextrin (HPCD) was used to form a water‐soluble host/guest inclusion complex (MPMA/HPCD) with the hydrophobic monomer. The complex was identified with FTIR and NMR techniques and polymerized in aqueous medium using potassium persulfate as initiator. During polymerization the resulting hydrophobic methacrylate polymer precipitated out with a majority of HPCD left in solution and a minority of HPCD bonded on the resulting polymer. The thus‐prepared polymer exhibited little difference from the counterparts obtained in organic solvent in number average molecular weight (M_n), polydispersity (M_w/M_n) and yield. The investigation provides a novel strategy for preparing hydrophobic ketoethyl methacrylate polymer in aqueous medium by using a monomer/HPCD inclusion complex. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Polymerization of methyl methacrylate by iron(II) pyridinebisimine complexes

Fe(II) pyridinebisimine complexes activated with trialkylaluminium or modified methylaluminoxane (MMAO) as catalysts were employed for the polymerization of methyl methacrylate. Polymer yields, activities and polymer molecular weights as well as molecular weight distributions can be controlled over a wide range by the variation of the structures of the Fe(II) pyridinebisimine complexes and the reaction parameters such as Al/Fe molar ratio, monomer/catalyst molar ratio, monomer concentration, reaction temperature and time applied to the polymerization of methyl methacrylate. Under optimum condition, the catalytic activity of Fe(II) complex is of up to 74.5 kg_polym/mol_Fe h.     

Preparation and characterization of polyelectrolyte copolymers containing methyl methacrylate and 2-hydroxyethyl methacrylate. I. Polymers based on methacrylic acid

Acidic polyelectrolyte copolymers containing 2-hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA), and methacrylic acid (MAA) were prepared by free radical polymerization to high conversion in solution. Copolymer yields were obtained by gravimetry (all in the 30–50% range), relative molecular weights estimated by intrinsic viscosity measurements (all in the 50–70 cc/g range), tacticity by ¹³C nuclear magnetic resonance (NMR) spectroscopy (all polymers predominantly syndiotactic with some atactic content), and composition by acid/base titrations in conjunction with ¹H-NMR spectroscopy (all close to the monomer charge ratios). Acid strengths or apparent pKa's were examined as a function of extent of ionization. Measurements performed in water indicated that the compact/extended coil transformation in predominantly syndiotactic polymethacrylic acid occurs also in copolymers of similar tacticity containing moderate to high concentrations of MAA. The apparent pKa of such polymers containing only small amounts of MAA did not vary with extent of ionization, indicating a low degree of interaction between the acid groups. In copolymer pairs containing similar amounts of MAA but differing HEMA and MMA contents, the polymer containing more HEMA appeared the stronger acid, presumably due to a better solvation of that polymer which would increase the net spatial charge–charge separation and decrease cooperative effects that lead to suppressed ionization.     

Graft copolymerizations of modified cellulose,grafting of acrylonitrile,and methyl methacrylate on carboxy methyl cellulose

Graft copolymers of acrylonitrile (ACN), methyl methacrylate (MMA), and their mixtures on carboxy methyl cellulose (d.S 0.4–0.5) were prepared by the use of ceric ion initiator in aqueous medium. The graft copolymers were characterized by IR spectroscopy. The extent of graft copolymerization of ACN and MMA was measured in terms of graft level, molecular weight of grafted polymer chains, and the frequency of grafting as functions of ceric ion concentration. It was found that at comparable reaction conditions, the molecular weight of the grafted polymer chains and the frequency of grafting were not of the same order of magnitude. For the monomer mixtures, the copolymer compositions obtained from the total nitrogen contents of the copolymer samples showed that a disproportionately low amount of ACN monomeric units were incorporated into the graft copolymer, even at high ACN content of the feed. © 1996 John Wiley & Sons, Inc.     

Microbial screening of copolymers of 2,4‐dichlorophenyl methacrylate with N‐vinylpyrrolidone: synthesis and characterization

Copolymers of 2,4‐dichlorophenyl methacrylate and hydrophilic monomer (N‐vinylpyrrolidone) were synthesized with different feed ratios using dimethylformamide as solvent and 2,2′‐azobisisobutyronitrile as initiator at 70 °C. The copolymers were characterized by IR spectrometry. Copolymer compositions were determined by UV spectrometry. The monomer reactivity ratios were determined by applying the conventional linearization method of Fineman‐Ross. Gel permeation chromatography was employed for determining molecular weights and polydispersity indexes. Thermogravimetric analyses of polymers were carried out in nitrogen atmosphere. Homo‐ and copolymers were tested for their antimicrobial properties against selected microorganisms. © 2003 Society of Chemical Industry     

Effect of acrylic diblock copolymer upon interfacial adhesion

The preparation and adhesion properties of poly(methyl methacrylate–butyl acrylate)[P(MMA-b-BA)] diblock copolymers have been studied. Block copolymers were analyzed by ¹H-NMR, DSC, and SEC, and confirm the synthesis of diblock copolymers, using the iniferter route. Investigation of peel strength in laminate joints, reinforced with various block copolymers, suggests that adhesion depends on both molecular weight and composition. When the copolymer contains mainly PMMA block, molecular weight has a marked effect, with adhesion being enhanced at higher copolymer molecular weight. For other PBA/PMMA compositions, no reinforcement was seen, irrespective of molecular weight. © 1996 John Wiley & Sons, Inc.     

Functional copolymers of p‐cumyl phenyl methacrylate and glycidyl methacrylate: Synthesis,characterization, and reactivity ratios

Free‐radical polymerization of p‐cumyl phenyl methacrylate (CPMA) was performed in benzene using bezoyl peroxide as an initiator at 80°C. The effect of time on the molecular weight was studied. Functional copolymers of CPMA and glycidyl methacrylate (GMA) with different feed ratios were synthesized by free‐radical polymerization in methyl ethyl ketone at 70°C, and they were characterized by FTIR and ¹H‐NMR spectroscopy. The molecular weights and polydispersity indexes of the polymers and copolymers were determined by gel permeation chromatography. The copolymer composition was determined by ¹H‐NMR. The glass‐transition temperature of the polymer and the copolymers was determined by differential scanning calorimetry. The reactivity ratios of the monomers were determined by the Fineman–Ross and Kelen–Tudos methods. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 336–347, 2005