Damping elastomer with broad temperature range based on irregular networks formed by end‐linking of hydroxyl‐terminated poly(dimethylsiloxane)

Irregular networks based on the condensation reaction of hydroxyl‐terminated poly(dimethylsiloxane) with cross‐linkers were investigated. The networks have excellent damping properties in a wide temperature range utilizing the viscoelastic relaxation of the irregular network with dangling chains. NMR Cross‐link Density Spectroscopy was used to explore the weight fraction of pendant chains and elastic chains in the elastomer. The transverse relaxation time for the elastomer was studied to explore the influence of pendant chains. The effects of the structure of cross‐linkers and the molecular weight of precursors were studied in detail. Elastomers cross‐linked by tetra‐functional cross‐linker (TEOS) have higher damping properties than the elastomers cross‐linked by tri‐functional cross‐linkers (MTMS and OTMS). A damping elastomer based on irregular networks with effective damping (tanδ > 0.3) temperature range of more than 250°C (from lower than ?60°C to 190°C) was prepared. POLYM. ENG. SCI., 56:97–102, 2016. © 2015 Society of Plastics Engineers     

Viscoelasticity of randomly crosslinked EPDM networks

The network structure of plasticized EPDM compounds, crosslinked with resol at different concentrations, was studied by means of rheological methods consisting in oscillatory shear tests, to determine the equilibrium modulus G_e, and long-time relaxation tests in compression followed by strain recovery (a protocol that also yielded values of the compression set of the samples). G_e results were analyzed with respect to the phenomenological model of Langley and Graessley which takes into account the contribution of crosslinks and trapped entanglements to the shear equilibrium modulus. A correction was introduced in order to take into account the presence of plasticizer. The measurement of the soluble polymer fraction in the different samples allowed a more detailed characterization of the networks to be carried out, following a molecular approach by Pearson and Graessley. This method enabled to calculate the crosslink density and trapping factor, but also to compute the probability ψ₁ for an un-crosslinked polymer unit to belong to a dangling chain. This probability was shown to increase as resol concentration, and then crosslink density, decreased. The empirical Chasset-Thirion equation was used to model the long-time relaxation data for each sample. Chasset-Thirion parameters were interpreted by Curro and Pincus within a theoretical framework based on the idea that the longest relaxation times are associated with the pendent chains of the network. The relaxation times, obtained from the fitting of experimental relaxation moduli, dramatically increased as the crosslink density decreased. This result corroborates the evolution of ψ₁: both tend to demonstrate that in the present compounds, the decrease of crosslink density is accompanied by an increase of the number and length of the dangling chains, leading to increasing relaxation times. The large soluble fraction and long pendent chains of samples showing the lowest crosslink densities were responsible for their poor elastic recovery. The relaxation data were used to model the elastic recovery of the compounds and predict their compression set profiles. Very satisfactory agreement was obtained between experimental data and computations.     

Dynamic response of transiently trapped entanglements in polymer networks

The structure and viscoelastic response of polymer networks are highly sensitive to the presence of pendant chains. These imperfections, that are unavoidable produced during a cross-linking reaction, reduce the cross-linking density and affect the damping response of elastomers. In this work the dynamics of pendant chains present in a cross-linked network is investigated using end-linked poly(dimethyl-siloxane) networks with well defined structure. For this purpose, model networks containing 10 and 20 wt% of two different monodisperse pendant chains with molecular weights well above the critical entanglement molecular weight and some of their blends were prepared. It was found that, within this range of concentration of pendant chains, the long-time dynamic response of the networks was nearly insensitive to the content of pendant material but deeply influenced by the average molar mass of these defects. While the equilibrium behavior of the networks can be well described by a mean field theory for rubber elasticity, the long time relaxational dynamics can be rationalized in terms of the Pearson-Helfand picture for the arm retraction process. Within this theoretical picture, the dynamics can be explained in terms of the molecular architecture of the network, the Rouse time and the weight average molar mass of the pendant material.     

Novel flexible network polymers consisting of oligomeric primary polymer chains originated in the mechanistic discussion of multiallyl crosslinking polymerization

Summary It is well known that allyl monomers polymerize only with difficulty and yield polymers having low molecular weights, i.e., oligomers. Inevitably, free-radical multiallyl crosslinking polymerization provides network polymers consisting of oligomeric primary polymer chains, i.e., having abundant dangling chains. This led to the development of novel flexible network polymers such as amphiphilic network polymers (I) consisting of short primary polymer chains and long crosslink units with opposite polarities, simultaneous interpenetrating networks (II) consisting of both polyurethane (PU) and polymethacrylate (PM) networks with oligomeric primary polymer chains, and network polymers (III) consisting of centipede-type primary polymer chains. Thus, the solution copolymerizations of benzyl methacrylate with tricosaethylene glycol dimethacrylate in the presence of lauryl mercaptan yielded I consisting of nonpolar, short primary polymer chains and polar, long crosslink units. The opposite type of I was prepared by the copolymerization of 2-hydroxyethyl methacrylate, a polar monomer having a hydroxyl group, with heneicosapropylene glycol dimethacrylate, a nonpolar monomer having a poly(oxypropylene) unit. The equimolar polyaddition crosslinking reaction of poly(methyl methacrylate-co-2-methacryloyloxyethyl isocyanate) with tri(oxytetramethylene) glycol, leading to PU networks, and the free-radical crosslinking copolymerization of methyl methacrylate with tri(oxytetramethylene) dimethacrylate in the presence of CBr₄, leading to PM networks, were progressed simultaneously, providing II formed via the topological crosslink between PU and PM network structures. The post-copolymerizations of oligomeric allyl methacrylate/alkyl methacrylate precopolymers, having different amounts of pendant allyl groups and different molecular weights, with allyl benzoate/vinyl benzoate monomer mixtures were conducted to give III.     

The effect of segment length on some properties of thermoplastic poly(ester–siloxane)s

A series of novel thermoplastic elastomers, based on poly(dimethylsiloxane) (PDMS) as the soft segment and poly(butylene terephthalate) (PBT) as the hard segment, were synthesized by catalyzed two‐step, melt transesterification reactions of dimethyl terephthalate and methyl esters of carboxypropyl‐terminated poly(dimethylsiloxane)s (M?_n = 550–2170 g mol^?1) with 1,4‐butanediol. The lengths of both the hard and soft segments were varied while the weight ratio of the hard to soft segments in the reaction mixture was maintained constant (57/43). The molecular structure, composition and molecular weights of the poly(ester–siloxane)s were examined by ¹H NMR spectroscopy. The effectiveness of the incorporation of the methyl‐ester‐terminated poly(dimethylsiloxane)s into the copolymer chains was verified by chloroform extraction. The effect of the segment length on the transition temperatures (T_m and T_g) and the thermal and thermo‐oxidative degradation stability, as well as the degree of crystallinity and hardness properties of the synthesized TPESs, were studied. Copyright © 2003 Society of Chemical Industry     

Effect of network structure on the stress-strain behaviour of endlinked PDMS elastomers

Endlinked poly(dimethylsiloxane) (PDMS) networks synthesized from telechelic precursor chains of different molar mass were prepared with varying volume fractions of non-reactive chains acting as solvent. Uniaxial extension and compression measurements were performed on these networks to investigate their stress-strain behaviour. The effect of the network structure and of solvent on the stress-strain behaviour is examined by controlling the extent of crosslinks and entanglements during the network synthesis. The master curve of the Rubinstein and Panyukov non-affine slip-tube (NAST) model provide an adequate fit to most of the extension and compression data. Furthermore, the crosslink and entanglement parameters of the NAST model (G_c and G_e) are found to be in general in reasonable agreement with the 2C₁ and 2C₂ parameters of the Mooney-Rivlin continuum model applied to the extension data. For high molar mass precursor chains, the entanglement contribution to the modulus surpasses the crosslink contribution.     

Dynamic relaxation characteristics of crosslinked poly(ethylene oxide) copolymer networks: Influence of short chain pendant groups

The dynamic relaxation characteristics of short-branch rubbery amorphous networks prepared by the photopolymerization of poly(ethylene glycol) diacrylate [PEGDA] crosslinker have been investigated using dynamic mechanical analysis and broadband dielectric spectroscopy. Copolymerization with low molecular weight acrylates was used to control effective crosslink density in the networks and led to the insertion of ethylene oxide pendant groups along the network backbone. Substantial differences in the sub-glass and glass-rubber relaxation properties of the copolymers were observed as a function of pendant length and the nature of the pendant terminal group (e.g., -OH vs. -OCH₃); the results are compared with prior studies on model copolymers containing longer, more flexible side branches.     

Elastomeric properties of bimodal networks prepared by simultaneous curing-filling technique

If the tetraethylorthosilicate (TEOS) used to end link hydroxyl-terminated poly(dimethylsiloxane) chains is present in excess, there are two effects on the resulting network structure. First, some of the excess TEOS hydrolyzes to give in situ precipitation of reinforcing silica particles. In addition, some can cause extension of the polymer chains, particularly of the shorter chains in the case of a bimodal network. In the present investigation, the ultimate strength and toughness of such bimodal networks was found to go through a maximum with increase in the amount of excess TEOS used in the curingfilling procedure.     

A novel method for preparing bimodal elastomeric networks

Summary Hydroxyl-terminated chains of poly(dimethylsiloxane) (PDMS) were end linked with a trifunctional silane containing 3-aminopropyl groups. CuCl₂ or CoCl₂ added to the networks forms complexes with the amino groups on the cross links, thus introducing additional chains that are very short. The resulting PDMS networks are in this sense bimodal, and were found to have increased values of the ultimate strength.     

Effect of chain length distribution on thermal characteristics of model polytetrahydrofuran (PTHF) networks

A series of model polytetrahydrofuran (PTHF) networks were synthesized via end-linking reactions of α, ω-allyl PTHF oligomers with a stoichiometric tetrafunctional crosslinker. The telechelic PTHF oligomers were synthesized by living cationic ring-opening polymerization of tetrahydrofuran followed by a termination reaction with allyl alcohol. Networks thus prepared have well-controlled architecture in terms of the inter-crosslink chain length (M_c) and chain length distribution: resulting in unimodal, bimodal and clustered structures. Unimodal network was prepared by using polymer chains of same molecular weight, bimodal networks were synthesized by using two groups of polymer chains with different average molecular weights, and the clusters are prepared by incorporating clusters of networks with small molecular weight chains in a network matrix made of longer chains. Thermal characteristics of these model networks were investigated as a function of crosslink density, as well as inhomogeneities of crosslink distribution using DSC. We demonstrate that glass transition temperature (T_g) and crystallization behavior (melting temperature and crystallinity) of the networks are both strongly influenced by crosslink density (M_c). By comparing the unimodal, bimodal and clustered networks with similar average M_c, the effects of inhomogeneities in the crosslink distribution on the thermal properties were also investigated. Results show that inhomogeneities have trivial influence on T_g, but strongly affects the crystallization behavior. Moreover, the effects of the content ratio and length ratio between long and short chains, and the effects of cluster size and size distribution on the thermal characteristics were also studied.     

Miscibility studies on poly(ethylene glycol)/dextran blends in aqueous solutions by dilute solution viscometry

Miscibility of poly(ethylene glycol) (PEG) with dextran (Dx) was investigated by dilute solution viscometry. Dilute solution viscosity measurements were made on ternary systems, polymer (1)/polymer (2)/solvent (H₂O), for four different average molecular weights of PEG and Dx. The intrinsic viscosity and viscometric interaction parameters were experimentally measured for the binary (solvent/polymer) as well as for the ternary systems by classical Huggins equation. Degree of miscibility of these polymer systems was estimated on the basis of the four following criteria: (1) the sign of the Δk_AB, (2) the sign of α, (3) the sign of ΔB, and (4) the sign of the μ. Based on the sign convention involved in these criteria, immiscibility was observed in most systems. The miscibility of all these systems in accordance with the interactions between the unlike polymer chains rather the polymer–solvent interactions were investigated depending on molecular weight of polymer sample. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 453–460, 2004     

Synthesis, characterization and liquid crystalline behavior of poly(monomethyl itaconate)s with new pendant cholesterol moieties

In order to investigate the effects of cholesteryl pendant groups on inducing liquid crystalline (LC) phase formation, a new series of cholesteryl-modified poly(monomethyl itaconate) (PMMI-Chol-C₆) have been synthesized from poly(monomethyl itaconate) (PMMI) and 6-(cholesteryloxycarbonyloxy) hexanol (Chol-C₆) with different degrees of substitution (DS_chol). All the obtained compounds were characterized by conventional spectroscopic methods. The DS_chol values of the modified PMMI were obtained by ¹H NMR spectroscopy and conductometric titration. The inherent viscosities of polymers were determined by an Ubbelohde viscometer at 35 °C in DMSO solution. The resulting products of modified PMMA polymers were soluble in a variety of organic solvents, and the solubility improved by increasing the DS_chol. Thermal behavior and optical properties of Chol-C₆ and PMMI-Chol-C₆ polymers were investigated by thermal gravimetric analysis, differential scanning calorimetry and hot-stage polarizing optical microscopy. The glass transitions of the modified PMMI polymers occurred at lower temperatures than the parent PMMI. It was found that among the synthesized polymers with different molar ratios of the substitution, only the PMMI-Chol-C₆ (1) polymer bearing 77 mol% of the side chains, with reduced melting point and increased thermal stability, formed thermotropic liquid crystalline smectic phases. This polymer exhibited wider mesophase than the mesogenic side chain Chol-C₆ and amorphous morphology. The results of a comparative study on the structure and properties of the polymers showed that liquid crystalline polymers may be achieved through the attachment of mesogenic cholesterol side chain onto the main chain via methylene chains of side branches.     

Comparative studies on effects of silica and titania nanoparticles on crystallization and complex segmental dynamics in poly(dimethylsiloxane)

Effects of in situ synthesized silica and titania nanoparticles, 5 and 20-40 nm in diameter, respectively, on glass transition and segmental dynamics of poly(dimethylsiloxane) networks were studied by employing differential scanning calorimetry, thermally stimulated depolarization currents and broadband dielectric relaxation spectroscopy techniques. Strong interactions between the well dispersed fillers and the polymer suppress crystallinity and affect significantly the evolution of the glass transition in the nanocomposites. Next to the α relaxation associated with the glass transition of the bulk amorphous polymer fraction, two more segmental relaxations were recorded, originating from polymer chains restricted between condensed crystal regions (α_c-relaxation) and the semi-bound polymer in an interfacial layer with strongly reduced mobility due to interactions with hydroxyls on the nanoparticle surface (α′ relaxation), respectively. Interactions with the polymer were found to be stronger in the case of titania than silica, leading to an estimated interaction length of around 2 nm for silica and at least double for titania nanocomposites.     

Relations between the molecular aggregation state and ionic conductivity in photopolymerized crosslinking polymers with oligo(oxyethylene) chains

A mixture of a vinyl monomer and a crosslinking agent was photopolymerized to form a crosslinked polymer film. Methacrylate with pendant oligo(oxyethylene) chain and poly(ethylene glycol) dimethacrylate were used as the vinyl monomer and crosslinking agent, respectively. The ionic conductivity of the film increased with an increasing concentration of LiClO₄ and then decreased. The size of the quasicrystalline aggregation phase composed of pendant and crosslinking chains in the film decreased with an increasing concentration of LiClO₄. The amorphous pendant and crosslinking oxyethylene chains gave rise to increased segmental motion and conductivity. The dissolution was depressed for a decrease in the ionic conductivity at a high LiClO₄ concentration at which the interactions among ions became stronger and the crystal phase of LiClO₄ was formed. The amount of the dissolution of the aggregation phase increased with an increasing crosslinking agent concentration. The quasicrystalline aggregation phase became larger with an increasing length of the pendant chains, and an increase in the size of the aggregation phase resulted in a decrease in the ionic conductivity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1272–1277, 2002     

Physical property characteristics of polysulfone/poly-(dimethylsiloxane) block copolymers

A series of polysulfone/poly(dimethylsiloxane) (AB)_n block copolymers have been synthesized over a wide composition range by varying the molecular weights of the polysulfone and poly(dimethylsiloxane) blocks. The properties vary from a rigid material at high polysulfone content (>65% polysulfone) to an elastomeric material at high poly(dimethylsiloxane) content (>65% poly(dimethylsiloxane)). A simple extension of MAXWELL's analysis of heterogeneous systems is shown to be applicable to the prediction of permeability data and a similar treatment of KERNER's analysis can be used for predicting modulus data. Analysis of both the permeability data and modulus data predict a similar phase inversion composition for this two-phase block copolymer. Different properties can be obtained with a given block copolymer composition by casting films from different solvents or by swelling the films in a non-solvent which preferentially swells one phase only. The tendency of poly(dimethylsiloxane) to crystallize at low temperature is dependent upon the flexibility of the block copolymer, which can be influenced by the method of film preparation.     

Characteristics of zwitterionic sulfobetaine acrylamide polymer and the hydrogels prepared by free-radical polymerization and effects of physical and chemical crosslinks on the UCST

A zwitterionic sulfobetaine polymer, poly(N,N-dimethyl(acrylamidopropyl) ammonium propane sulfonate) (poly(DMAAPS)), and the hydrogels of this polymer were synthesized by free-radical polymerization in an aqueous redox system using a wide range of monomer concentrations (C_m). The resulting polymers were characterized in terms of polymer yield, intrinsic viscosity, molecular weight, gel fraction, and thermoresponsive phase-transition behavior. Parameters in the Mark–Houwink–Sakurada equation, including the molecular-weight exponent α, were determined for poly(DMAAPS) in 0.1 M NaCl aqueous solution. The physical state and transparency of the poly(DMAAPS) samples were strongly dependent on C_m and temperature. At higher values of C_m (i.e. above a critical molecular weight), poly(DMAAPS) became a gel comprising a physically crosslinked network consisting of entangled polymer chains and interchain associations of the zwitterionic groups. The poly(DMAAPS) solutions or gels exhibited a thermoresponsive phase transition with an upper critical solution temperature (UCST). The gels obtained were completely soluble in aqueous NaCl solution at ambient temperature as well as in water at temperatures above UCST. The effects of molecular weight, chemical crosslink density and copolymerization on the UCST were also elucidated.     

Synthesis and characterization of thermoplastic poly(ester–siloxane)s

Two series of thermoplastic poly(ester–siloxane)s, based on poly(dimethylsiloxane) (PDMS) as the soft segment and poly(butylene terephthalate) as the hard segment, were synthesized by two‐step catalyzed transesterification reactions in the melt. Incorporation of soft poly(dimethylsiloxane) segments into the copolyester backbone was accomplished in two different ways. The first series was prepared based on dimethyl terephthalate, 1,4‐butanediol and silanol‐terminated poly(dimethylsiloxane) (PDMS‐OH). For the second series, the PDMS‐OH was replaced by methyl diesters of carboxypropyl‐terminated poly(dimethylsiloxane)s. The syntheses were optimized in terms of both the concentration of catalyst, tetra‐n‐butyl‐titanate (Ti(OBu)₄), and stabilizer, N,N′‐diphenyl‐p‐phenylene‐diamine, as well as the reaction time. The reactions were followed by measuring the inherent viscosities of the reaction mixture. The molecular structures of the synthesized poly(ester–siloxane)s were verified by ¹H NMR spectroscopy, while their thermal properties were investigated using differential scanning calorimetry. © 2001 Society of Chemical Industry     

Synthesis and characterization of biodegradable aliphatic copolyesters with poly(tetramethylene oxide) soft segments

A series of aliphatic poly(ether–ester)s based on flexible poly(tetramethylene oxide) (PTMO) and hard poly (butylene succinate) (PBS) segments were synthesized by the catalyzed two‐step transesterification reaction of dimethyl succinate, 1,4‐butanediol, and α,ω‐hydroxy‐terminated PTMO (M_n = 1000 g/mol) in the bulk. The content of soft PTMO segments in the polymer chains was varied from 10 to 50 mass %. The effect of the introduction of the soft segments on the structure, thermal, and physical properties, as well as on the biodegradation properties was investigated. The composition and structure of the aliphatic segmented copolyesters were determined by ¹H NMR spectroscopy. The molecular weights of the polyesters were verified by viscometry of dilute solutions and polymer melts. The thermal properties were investigated using DSC. The degree of crystallinity was determined by means of DSC and WAXS. Biodegradation of the synthesized copolyesters, estimated in enzymatic degradation tests on polymer films in phosphate buffer solution with Candida rugosa lipase at 37°C, was compared with hydrolytic degradation in the buffer solution. Viscosity measurements confirmed that there was no change in molecular weight of the copolyesters leading to the conclusion that the degradation mechanism of poly(ester–ether)s based on PTMO segments occurs through the surface erosion. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Characterization of chain binding to filler in silicone-silica systems

Extraction of polymer from mechanically blended poly(dimethylsiloxane)-silica mixtures was conducted at room temperature using chloroform. The amount of silicon still bound to silica after removal of the polymer solution was studied as a function of the average chain molecular weight. A multiple-link structure of binding sites of PDMS chains onto the plain surface of silica is proposed from the analysis of results.     

Polyurethane-polysiloxane interpenetrating polymer networks: 1. A polyether urethane-poly(dimethylsiloxane) system

The synthesis and properties of a polyether urethane network based on Adiprene L-100, of a poly(dimethylsiloxane) network and of nine interpenetrating polymer networks based on these polymers were investigated. To form the latter materials, the prepolymers were mixed and crosslinked simultaneously, but by separate mechanisms. Comparison of the network solubility parameters suggested marked incompatibility. Optical microscopy, dynamic mechanical analysis and the tensile testing indicated gross phase separation. From 90 to 50% of the polyether urethane component, this network was continuous and the poly(dimethylsiloxane) was present as dispersed phases. From 40 to 10% of the polyether urethane, the situation was reversed. Some degree of interchain mixing at phase boundaries was detected by ¹³C nuclear magnetic resonance spectroscopy.