Amphiphilic diblock and ABC triblock methacrylate copolymers: synthesis and aqueous solution characterization

Three isomeric, linear, equimolar, amphiphilic ABC triblock copolymers comprising methyl methacrylate (MMA, nonionic hydrophobic), 2-(dimethylamino)ethyl methacrylate, (DMAEMA, ionizable hydrophilic) and hexa(ethylene glycol) methacrylate (HEGMA, nonionic hydrophilic) units (10 units in each block) were synthesized by group transfer polymerization (GTP). These were the three block sequence isomers, ABC, ACB and BAC. The corresponding random terpolymer was also prepared. The molecular weights and compositions of all the polymers were characterized by GPC and ¹H NMR. Measurements of the hydrodynamic diameters and cloud points of the copolymers in aqueous solution suggest that the various distributions of monomer units in the four terpolymers (the three triblocks and the random) result in different supramolecular structures with different colloidal stabilities.     

Cationic fluorene-thiophene diblock copolymers: Aggregation behaviour in methanol/water and its relation to thin film structures

Optical spectroscopy and photophysical measurements on cationic fluorene-thiophene diblock copolymers in solution show distinct properties for the two blocks, with clear indications of singlet exciton migration from the polyfluorene to polythiophene blocks. Electrical conductivity measurements and small angle X-ray scattering studies show that different aggregates are formed in water and methanol. This may be associated both with different solubilities of the two blocks and with the effect of solvent on the degree of dissociation of the ionic part. Atomic force microscopy (AFM) shows that different nanostructures are deposited from the two solvents, with large, vesicular structures deposited on mica from methanolic solution. Aggregation behavior is also found to be modulated, and to lead to more rigid thiophene blocks, by addition of the oppositely charged surfactant sodium dodecylsulfate.     

Rod-rod and rod-coil self-assembly and phase behavior of polypeptide diblock copolymers

Poly(γ-benzyl l-glutamate) (PBLG) forms a rigid helical rod in organic solvents. Cholesteric liquid crystalline ordering of these rods has been observed in PBLG solutions and cast films. In this research, peptidic block copolymers were created using PBLG in order to determine the effect of an added block on the classic cholesteric ordering. Peptide blocks with varied lengths and inherent secondary structures, random coil or rigid rod, were attached to PBLG molecules. The self assembly/liquid crystalline ordering of these molecules in films cast from various organic solvents was probed with transmission electron microscopy (TEM), atomic force microscopy (AFM), and X-ray diffraction (XRD). In pure PBLG and PBLG diblock copolymers with relatively small additional blocks, cholesteric liquid crystalline ordering was observed in bulk films. However, depending on the kinetics of film formation and the amount of non-PBLG block, significant changes in the nanostructure and microstructure were observed. These purely peptidic block molecules provide the opportunity to pattern materials with peptidic functionalities by taking advantage of block copolymer phase behavior and liquid crystal ordering.     

Polydispersity control in ring opening metathesis polymerization of amphiphilic norbornene diblock copolymers

Ring opening metathesis polymerization (ROMP) with Grubbs's catalyst was used to synthesize narrow polydispersity (PDI)diblock copolymers of norbornene (NOR) and norbornenedicarboxylic acid (NORCOOH). Norbornene (NOR) and 5-norbornene-2,3,-dicarboxylic acid bis trimethylsilyl ester (NORCOOTMS) were used as precursor monomers for thepolymerization. [NORCOOTMS]_m/[NOR]_n was converted to [NORCOOH]_m/[NOR]_n by precipitating the polymer solution in a mixture of methanol, acetic acid, and water. The conversion to 5-norbornene-2,3-dicarboxylic acid was evidenced by ¹H NMR. By polymerizing the bulkier NORCOOTMS precursor monomer first, lower PDIs were observed for the completed [NORCOOH]_m/[NOR]_n block copolymers in comparison to copolymers where the NOR block was polymerized first. The PDI of the diblock copolymers of [NORCOOH]_m/[NOR]_n decreased with increase in block length ofthe precursor NORCOOTMS monomer. This study shows that the PDI can be controlled by selecting a monomer with appropriate functionality as the starting block of the block copolymer to control the rate of propagation, R_p, as an alternative of using additives to change the reactivity of the catalyst.     

Living random and block copolymerization of ethene and propene on a tailor-made phenoxyimine catalyst and characterization of the resulting high molecular weight PE-block-P(E-co-P) block copolymers

The phenoxyimine catalyst (bis-(N-(3′,5′-diiodo-salicylidene)-2,6-difluoroaniline)-titanium(IV)-dichloride) was tailored to enable random and block copolymerisation of propylene and ethylene with compositions covering the entire feasible composition range. Well-defined high molecular weight diblock copolymers of the type PE-block-P(E-co-P), consisting of a semi-crystalline polyethylene and a soft P(E-co-P) block, were prepared and evaluated with respect to propylene content and the block lengths. The characterisation by means of AFM, CRYSTAF data and high temperature chromatographic elution provided the experimental evidence that no homo-polyethylene and less than 5% of the random copolymer are formed as by-products.     

Syntheses of well-defined poly(siloxane)-b-poly(styrene) and poly(norbornene)-b-poly(styrene) block copolymers using functional alkoxyamines

Functional alkoxyamines, 1-[4-(4-lithiobutoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (2) and 1-[4-(2-vinyloxyethoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (3) were prepared, and well-defined poly(hexamethylcyclotrisiloxane)-b-poly(styrene)[poly(D₃)-b-poly(St)] and poly(norbornene)-b-poly(St) [poly(NBE)-b-poly(St)] were prepared using the alkoxyamines. The first step was preparation of poly(D₃) and poly(NBE) macroinitiators, which were obtained by the ring-opening anionic polymerization of D₃ using 2 as an initiator and the ring-opening metathesis polymerization of NBE using 3 as a chain transfer. The radical polymerization of St by the poly(D₃) and poly(NBE) macroinitiators proceeded in the ‘living’ fashion to give well-defined poly(D₃)-b-poly(St) and poly(NBE)-b-poly(St) block copolymers.     

Theory of chromatography of ring-shaped block copolymers

A theory is developed for describing liquid chromatography of ring diblock and multiblock copolymers. The chromatographic behavior of ring block copolymers at different adsorption interactions is analyzed theoretically and compared with that of linear block copolymers; typical chromatograms are simulated by using the theory. In particular, it is shown that under the critical interaction condition for one block the chromatographic retention of a ring diblock copolymer is dependent of the length of the ‘critical’ block; this behavior differs qualitatively from that of a linear diblock copolymer. Ring copolymers are always more retained than linear ones, therefore such copolymers can be separated. Especially good separation of heterogeneous ring and linear block copolymers is predicted at near-critical interaction conditions. According to the theory, ring diblocks and multiblocks can be separated as well, if one component of a copolymer is adsorbing, while the other one is not adsorbing.     

Solution study of novel diblock copolymers: Morphology and structural transition

The solution behavior and morphology of the nanostructures formed by novel block copolymers based on 1-cetyl[2-(acryloyloxy)ethyl]dimethylammonium bromide (ADHA) and 2-hydroxyethylacrylate (HEA) or N-isopropylacrylamide (NIPAM) have been studied using small angle X-ray scattering (SAXS), dynamic light scattering (DLS), and transmission electron microscopy (TEM). In these block copolymers the pADHA block consists of long hydrophobic C₁₆ tails connected to a positively charged quaternary ammonium group, making it amphiphilic, while the second block is either fully hydrophilic (pHEA) or thermoresponsive (pNIPAM). Using SAXS, we demonstrate that the morphology of block copolymer nanostructures is dependent on the solute concentration and on the length and composition of the blocks. In the case of thermoresponsive pADHA-b-pNIPAM, two types of ordered structures are formed and their characteristics are also defined by the temperature. Complementary information is obtained from DLS, showing large particles with the size up to 280 nm, which is beyond the resolution of the SAXS data. Loss of ordering around the lower critical solution temperature followed by ordering restoration at the higher temperature was observed for the pADHA-b-pNIPAM block copolymers. The differences in the structural order in the block copolymer solutions are directly related to their ability to coat hydrophobic metal nanoparticles.     

Synthesis of controlled-structure AB diblock copolymers of 3-O-methacryloyl-1,2:3,4-di-O-isopropylidene-d-galactopyranose and 2-(dimethylamino)ethyl methacrylate

We report herein the synthesis of hydrophilic-hydrophilic AB diblock copolymers of 3-O-methacryloyl-d-galactopyranose (MAGP) with 2-(dimethylamino)ethyl methacrylate (DMAEMA). These materials were obtained from precursor AB diblock copolymers of 3-O-methacryloyl-1,2:3,4-di-O-isopropylidene-d-galactopyranose (MAIpGP) and DMAEMA. The well-defined precursor block copolymers were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization in organic media employing dithiobenzoates as the mediating agents. We show that the homopolymerization of MAIpGP proceeds in a controlled fashion as judged by the linear pseudo-first-order kinetic plot, the linear relationship between the number average molecular weight (M_n) and the degree of conversion, and the resulting low polydispersity indices. Homopolymers of MAIpGP were employed as macro chain transfer agents for the preparation of the target AB diblock copolymers with DMAEMA. We show that PMAIpGP homopolymers are readily and quantitatively converted to the corresponding poly(3-O-methacryloyl-d-galactopyranose) (PMAGP) species according to a literature procedure. In a control experiment we demonstrate that these deprotection conditions do not adversely affect a DMAEMA homopolymer.     

Linear-dendritic block copolymers: The state of the art and exciting perspectives

Concurrent with the rapid development of both dendrimers and hyperbranched polymers, a novel class of block copolymer architectures has emerged from the combination of these dendritic architectures with linear chains, the “linear-dendritic block copolymers” (LDBCs). This review gives a comprehensive summary of the state of the art in this rapidly developing field from pioneering early work to promising recent approaches.The different strategies leading to these hybrid architectures with either perfect dendrimer/dendron building blocks or imperfect, yet more conveniently accessible hyperbranched segments, are reviewed and compared. The consequences of the unusual polymer topology for supramolecular structures both in solution and in the solid state are summarized, and important differences in comparison with classical linear block copolymer structures are highlighted. Current challenges in the area of block copolymers, nanotechnology and potential applications of linear-dendritic block copolymers are also considered.     

Single crystals morphology of biodegradable double crystalline PLLA-b-PCL diblock copolymers

The morphology of solution grown single crystals of a series of double crystalline diblock copolymers derived from l-lactide and ?-caprolactone has been investigated by means of transmission electron microscopy. The copolymers had a variable composition with a poly(l-lactide) weight percentage that ranged between 81 and 10%. All samples had a low polydispersity index (1.4-1.1) and a similar number average molecular weight (20,000-35,000 g/mol).Bulk crystallization and melting behaviour of diblock copolymers were evaluated by DSC and the results demonstrated the double crystalline nature of the samples. Fractionated crystallization clearly occurred in copolymers having an intermediate composition.Isothermal crystallizations were performed in dilute n-hexanol solutions at temperatures that ranged between 80 and 50 °C. Crystal morphologies were dependent on the crystallization temperature and even on the composition. Thus, the inability of poly(?-caprolactone) (PCL) blocks to crystallize between 80 and 70 °C rendered lozenge, truncated and spindle-shaped crystals associated to the poly(l-lactide) (PLLA) block. These usually had thicker edges due to PLLA overgrowths that mainly took place in their periphery. However, an overgrowth of irregular PCL crystals during subsequent cooling and crystallization at room temperature was also detected. Complex morphologies constituted by lamellar crystals of both PCL and PLLA blocks were developed at intermediate temperatures (70-65 °C), whereas elongated hexagonal morphologies mainly associated to the PCL block were detected at the lowest crystallization temperature. In general, electron diffraction patterns showed for all samples’ reflections associated to both poly(?-caprolactone) and poly(l-lactide) (α-form) crystals. The relative intensity between the two types of reflections varied according to the copolymer composition.     

Crystallization behavior of oxyethylene/oxybutylene diblock and triblock copolymers

The crystallization behavior of poly(oxyethylene)-b-poly(oxybutylene) block copolymers with different compositions, morphologies and architectures (E_mB_n diblock copolymers and E_mB_nE_m, B_nE_mB_n triblock copolymers) were investigated and the effect of volume fraction and architecture on the crystallization temperature (T_c) in non-isothermal crystallization was determined. It is found that the E_mB_n diblock copolymers having long E blocks exhibit similar crystallization temperatures, irrespective of volume fraction and morphology, but for the block copolymers with shorter E blocks the crystallization temperature increases with both the volume fraction, φ_E, and the length, m, of the E block. Some block copolymers with extremely low T_c, which fall into the temperature range normally associated with homogenous nucleation, were chosen for time-resolved small-angle X-ray scattering (SAXS) and isothermal crystallization kinetics experiments. The results show that breakout crystallization occurs in all these block copolymers. Therefore, unlike E_mB_n/B_h blends, there is no obvious relationship between T_c and crystallization behavior in neat block copolymers and homogeneous nucleation does not definitely lead to confined crystallization. The values of χ_c/χ_ODT for all the block copolymers with hex and bcc morphology were also calculated. It is found that all the block copolymers have χ_c/χ_ODT<3, in agreement with the previously reported critical value and consistent with their breakout crystallization behavior.     

Effect of chain topology on the self-organization and the mechanical properties of poly(n-butyl acrylate)-b-polystyrene block copolymers

A series of well defined ABA, 3-arm star and bottle brush type copolymers, containing soft poly(n-butyl acrylate) (PBA) blocks and hard blocks of polystyrene (PS) were synthesized by atom transfer radical polymerization (ATRP). Small angle X-ray scattering was used to study the phase separation in these systems and dynamic mechanical analysis and tensile tests were performed to characterize their thermo-mechanical properties. The specific molecular architecture has a major effect on the copolymers self-organization and material properties. The linear ABA type copolymers showed micro phase separation and thermoplastic elastomer (TPE) behavior only at very high PS content. The change of molecular architecture from linear to 3-arm star type resulted in an improved phase separation at lower PS content and better thermoplastic elastomer properties. In contrast the specific brush type molecular architecture seems to prevent the micro phase separation of the PBA and PS components, resulting in amorphous bulk material with single glass transition temperature.     

Dielectric and dynamic-mechanical study of the mobility of poly(t-butylacrylate) chains in diblock copolymers: Polystyrene-b-poly(t-butylacrylate)

A calorimetric, dielectric and dynamic-mechanical study of the dynamics of the poly(t-butyl acrylate) (PtBa) chains has been carried out in a PtBa homopolymer and two polystyrene (PS)-b-PtBa block copolymers with different PtBa chain lengths. The DSC results show that the size of the cooperative rearranging regions is similar in the homopolymers and the copolymers, both for the PtBa rich- and the PS-rich regions. Therefore, no significant contributions are found arising from composition fluctuations in the copolymers. The relaxation map obtained from dielectric relaxation indicates that there are no differences in the temperature dependence of the α-relaxation of the PtBa block in the three samples studied. However, there are larger differences for the values obtained from DMTA experiments. Contrary to the α-relaxation, the relaxation map for the β-transition shows that the characteristic times for the PtBa blocks are smaller in the homopolymer than in the copolymers. In principle, these are unexpected results because the β-relaxations have a more local character than the α-ones. The width of the α-relaxation increases with T for all the samples, and it is slightly larger for the copolymers. The intensity of the α-relaxation is larger (between 3 and 4 times) for the homopolymer. Considering the molecular weights of the PtBa blocks, this effect has to be ascribed to the existence of frozen amorphous PtBa due to the existence of the glassy PS domains in the microphase separated copolymers.Molecular Dynamic Simulations (MDSs) for different sequences of the polymers under study were carried out. The conformational analysis was carried out between 1000 and 1700 K. The analysis of the variation of angles ?₁ and ?₂ of the ester group of PtBa points out the existence of a correlation between the conformational changes of the side group of the polymer chains and their relaxational behaviour.     

Synthesis of defined polyhedral oligosilsesquioxane‐containing diblock and triblock methacrylate copolymers by atom transfer radical polymerization

Defined diblock and triblock copolymers composed of methyl methacrylate‐co‐glycidyl methacrylate block and 3‐{3,5,7,9,11,13,15‐hepta(2‐methylpropyl)‐pentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]‐octasiloxan‐1‐yl}propyl methacrylate block(s), i.e., P(MMA‐co‐GMA)‐b‐PiBuPOSSMA and PiBuPOSSMA‐b‐P(MMA‐co‐GMA)‐b‐PiBuPOSSMA, were synthesized by atom transfer radical polymerization (ATRP). First, monofunctional and bifunctional P(MMA‐co‐GMA) copolymers were synthesized by ATRP. Subsequently, these copolymers were successfully used as macroinitiators for ATRP of POSS‐containing methacrylate monomer. The process showed high initiation efficiency of macroinitiators and led to products with low dispersity. The synthesized block copolymers were characterized by size exclusion chromatography, ¹H‐NMR spectroscopy and their glass transition temperatures were determined by differential scanning calorimetry. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Aggregation behaviour of well defined amphiphilic diblock copolymers with poly(N-isopropylacrylamide) and hydrophobic blocks

Series of amphiphilic diblock copolymers with poly(N-isopropylacrylamide) as a hydrophilic block and a hydrophobic block consisting of either polystyrene or poly(tert-butyl methacrylate) were synthesised using RAFT polymerisations. Differential scanning calorimetry showed the chemically different blocks being phase separated in dry polymers. Light scattering and microcalorimetry studies were performed on aqueous solutions to investigate the phase behavior of the diblock copolymers. By carefully transferring the polymers from an organic solvent to water, either micellar particles or large aggregates were obtained depending on the relative lengths of the blocks. Large aggregates collapsed upon heating, whereas collapse occurred slowly within a broad temperature range in the case of micelle like structures. However, microcalorimetrically the collapse of the PNIPAM chains was observed to take place in all samples, suggesting that the shells of the micellar particles are crowded in a way which hinders the compression of the poly(N-isopropylacrylamide) chains.     

Association behavior of thermo-responsive block copolymers based on poly(vinyl ethers)

Thermo-sensitive nanosized structures have been prepared in water from poly(methyl vinyl ether)-block-poly(isobutyl vinyl ether) (PMVE-b-PIBVE) block copolymers. The composition and the architecture (diblock and triblock architectures) of the PMVE-b-PIBVE copolymers have been varied. The investigated copolymers had an asymmetric composition with a major PMVE block. While the PIBVE blocks are hydrophobic, the PMVE blocks are hydrophilic at room temperature and become hydrophobic above their demixing temperature (around 36 °C) as a result of the lower critical solution temperature (LCST) behavior. At room temperature, the amphiphilic copolymers aggregate in water above a critical micelle concentration, which has been experimentally measured by hydrophobic dye solubilization. The hydrodynamic diameter of the structures formed above the cmc has been measured by dynamic light scattering (DLS) while their morphology has been studied by transmission electron microscopy (TEM). ¹H NMR measurements in D₂O at room temperature reveal that the aggregates contain PIBVE insoluble regions surrounded by solvated PMVE chains. These investigations have shown that polydisperse spherical micelles are formed for asymmetric PMVE-b-PIBVE copolymers containing at least 9 IBVE units. For copolymers containing less IBVE units, loose aggregates are formed.Finally, the thermo-responsive, reversible properties of these structures have been investigated. Above the cloud point of the copolymers, the loose aggregates precipitate while the micelles form large spherical structures.     

Nanostructured silica-type hybrids from poly(styrene-b-ethylene oxide-b-caprolactone) copolymers

By employing a triblock copolymer, poly(styrene-b-ethylene oxide-b-caprolactone) copolymer, as a structure-directing agent, a series of silica-type hybrid materials were prepared via a sol-gel method of (3-glycidyloxypropyl) trimethoxy silane and aluminum sec-butoxide. Small angle X-ray scattering and transmission electron microscopy analyses demonstrated that ordered nanostructures, from lamellar to 2-dimensional hexagonal columnar with a disordered intermediate morphology, were exhibited as a function of the amount of loaded silica nanoparticles. Among the observed morphologies, the silica particles in the lamellar sample were localized at the PS/PEO interface, which could be elucidated by the dominant translational entropy of small silica particles.     

Crazing in polystyrene-polybutadiene diblock copolymers containing cylindrical polybutadiene domains

Polystyrene-polybutadiene diblock copolymers exhibiting morphologies of cylindrical rubbery domains in a glassy matrix were studied in tensile stress-strain experiments. The various contributions of rubber volume fraction, overall copolymer molecular weight, and blending of diblock copolymers with homopolymers were examined. Transmission electron microscopy revealed a novel internal structure of the crazes in certain samples; inspection of the micrographs of these crazes suggests that the craze matter forms by a two-step process: cavitation in the rubbery domains followed by necking and drawing of the topologically continuous polystyrene matrix.     

Crosslinkable micelles from diblock amphiphilic copolymers based on vinylbenzyl thymine and vinylbenzyl triethylammonium chloride

Polymeric micelles (PMs) composed of self‐assembled amphiphilic block copolymers were synthesized from vinylbenzyl thymine (VBT) and vinylbenzyl triethylammonium chloride (VBA) exhibiting improved physical stability. Three diblock copolymers of different chemical compositions and similar molecular weights (polydispersities below 1.5) were obtained via nitroxide mediated radical polymerization. Critical micelle concentration (CMC) was determined by dye micellization method, the shift of the absorption peak of the anionic (EY) due to the interactions with non‐assembled chains and auto‐assembled copolymers was followed. Polymeric systems exhibited good stability revealing that a higher proportion of cationic monomers in the diblock reduce the CMC. Furthermore, after the core of PMs was photocrosslinked by UV irradiation, the CMC decreases notably. Kinetic release studies using EY dye as probe demonstrated that both, higher VBA ratios in the polymer and higher UV‐irradiation, slow down the dye release. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41947.