共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
同步协同设计中基于关联关系的资源调度方法 总被引:3,自引:0,他引:3
提出基于关联关系的资源调度策略,以解决同步协同设计技术所面临的共享冲突的难点问题。以领域隶属度为依据,定义了不同属性资源间的关联度。建立了同步协同过程的工作流模型,面向不同阶段的工作流,提出了基于关联关系的资源调度策略。采用智能体技术实现信息流控制,建立了同步协同设计系统的网络逻辑结构。最后以具体实例阐明了基于关联关系的资源调度实现方法。 相似文献
3.
本文首先介绍了流式媒体的概念及特点,在此基础上提出了开发适合企业间进行协同产品开发的协同平台的关键技术-多点实时视频技术,并对它进行了详细的论述,最后提出了具体实现方案并在作者研发的原型系统中得到实现验证。 相似文献
4.
5.
计算机支持协同工程设计(CSCED)是计算机支持协同工作(CSCW)的一个分支,计算机支持协同工程设计系统(CSCEDS)是CSCED的具体实现。文章在介绍CSCEDS技术的基础上,阐述了CSCEDS的集成模型和实现方法。 相似文献
6.
7.
首先讨论了固体火箭发动机设计中的一些特点,分析了建立固发协同设计环境的关键技术,并以此为基础提出了一种应用Pro/Intralink、STEP、Lotus Notes建立固体火箭发动机协同设计环境的可行方案,能够为设计人员的具体工作提供强有力的支持,从而使固发设计的支持环境提高到一个新的水平。 相似文献
8.
9.
10.
11.
Recent works have shown that well-known models used for the analysis of human behaviour, in economics and in production—distribution contain unsuspected regimes of deterministic chaos. This paper is intended to study and analyse such behaviour in manufacturing and assembly shops.We have shown how deterministic chaos could be produced by human decision making: the equations built from decision rules generally applied in a complex manufacturing system, lead to chaotic behaviour in a realistic region of parameter space. Also, we have implemented a methodology with associated tools to verify the nature of a production system and to highlight the above assumptions. Such target systems concerned by a deterministic chaos cannot be controlled through conventional management systems.Dynamic modelling analysis of different production systems including delays, multiple-feedback loops, environmental and intrinsic disturbances, enables the induction of the management rules to be implemented for improving the control of such complex and chaotic systems.Glossary AGV
Automatic guided vehicle
- AI
Artificial intelligence
- BAT
Bond assembly and test
- BM
Bill of material
- CRP
Capacity requirement planning
- DM
DeMand
- DSS
Decision support system
- FCS
Floor control system
- FFT
Fast Fourrier transform
- FMS
Flexible manufacturing systems
- GA
Genetic algorithm
- KBS
Knowledge-based system
- LMA
Line manager advisor
- MAQ
Maximum allowable quantity
- MCS
Manufacturing control system
- MRP
Material requirements planning
- NC
Numerical control
- NO
Numerical optimisation
- PLOOT
Plant layout optimisation
- RESQ
Research queuing package
- SMS
Shop management system
- TAT
Turn around time
- TCM
Thermal control module
- WIP
Work in process
- WMS
Workstation management system 相似文献
12.
13.
An optoelectronic target-type volumetric air flow-rate transducer for bidirectional measurements is presented. The sensor is composed of a T-shaped target and two nominally identical LED-photodiode couples which are operated in differential mode. The sensitive surfaces of the photodiodes are differentially shadowed by the deflection of the target, which in turn depends on the gas flow-rate. The principle of operation is described in mathematical terms and the design parameters have been optimized in order to obtain the highest sensitivity along with minimal pressure drop and reduced dimensions. The sensor is placed in a 20 mm diameter hose and was tested with air flow-rate in the typical temperature range of mechanical ventilation between 20 and 40 °C. The theoretical model was validated through experiments carried out in the volumetric flow range from -7.0 to +7.0 l min(-1). The nonlinear behavior allows sensitivities equal to 0.6 V l(-1) min for flow rates ranging from -2.0 to +2.0 l min(-1), equal to 2.0 V l(-1) min for flow rates ranging from -3.0 to -2.0 l min(-1) and from +2.0 to +3.0 l min(-1), up to 5.7 V l(-1) min at higher flow rates ranging from -7.0 to -3.0 l min(-1) and from +3.0 to +7.0 l min(-1). The linear range extends from 3.0 to 7.0 l min(-1) with constant sensitivity equal to 5.7 V l(-1) min. The sensor is able to detect a flow-rate equal to 1.0 l min(-1) with a sensitivity of about 400 mV l(-1) min. The differential nature of the output minimizes the influence of the LEDs' power supply variations and allows to obtain a repeatability in the order of 3% of full scale output. The small pressure drop produced by the sensor placed in-line the fluid stream, of about 2.4 Pa at 7 l min(-1), corresponds to a negligible fluid dynamic resistance lower than 0.34 Pa l(-1) min. 相似文献
14.
钇稀土在Mg-Zn-Zr镁合金中的强化作用 总被引:10,自引:0,他引:10
通过金相、机械性能试验、X射线衍射、扫描电镜、透射电镜及电子探针地Mg-Zn-Zr镁合金和添加0.94%(wt)钇稀土的Mg-Zn-Zr镁合金进行了对比研究,研究结果表明,钇稀土的添加,可细化合金的晶粒,改善合金的金相组织。合金添加包后,除了锌元素易在晶界富集外,钇元素也趋向于在晶界富集,并能与锌生成钇-锌相。在晶内,少量钇能固溶在合金基体,同时也能与镁生成镁-钇相。合金添加0.94%wt的钇,可使热挤压态下的抗拉强度有较大提高,其作用主要是,钇可在合金中起到变质作用,改善合金的金相组织。同时在挤压工艺条件下,在合金内能产生大量弥散细小的钇-锌相、镁-钇相质点,弥散强化合金,同时也可使合金产业亚晶组织强化合金。 相似文献
15.
采用专利号为ZL 2005 1 0026176.5[1]的专利技术,成功地研制出了适合于高精度传动的滚动丝杆螺母.该螺母采用了一种全新的滚动结构,不仅具有普通滚珠丝杆的特点,而且丝杆螺母副采用了普通T型丝杆和一种变形滚珠轴承相配合并进行了优化设计,滚动精密螺母螺杆副的啮合间隙趋近于零,在往复直线运动换向时消除了空行程,全部为滚动接触使磨擦阻力更小,有效消除了往复间隙,提高了运动定位精度和效率.与现有技术相比,该螺母加工简便,具有易于调整和维护的特点,成本低,降低了能耗,便于推广和应用,具有很好的应用前景. 相似文献
16.
针对草甘膦生产过程中的大时滞、非线性对象,把Sm ith预估控制原理和模糊控制器参数的自适应调整方法结合起来,提出带积分的自适应模糊-Sm ith控制策略,基本控制级采用模糊控制,协调级采用自适应机制实时调整控制器的量化和比例因子,积分器实时进行积分。MATLAB仿真结果表明,该控制策略具有良好的动静态特性及更强的鲁棒性,是解决草甘膦合成过程温度控制问题的一种有效策略。 相似文献
17.
设计了3—3R球面并联喷胶装置的控制系统,根据并联机构的运动学特性和制鞋业喷胶工艺要求,采用了固高GT-400-SG—PCI—G运动控制卡,给出了其硬件连接和软件设计的方法。开发了操作简便,交互性良好的喷胶系统控制软件。控制软件实现了单轴控制、坐标系控制(多轴协调控制)、轨迹控制等模块。 相似文献
18.
2.25CrlMo0.3V钢具有强度高、抗氢侵蚀、抗氢脆和抗氢致剥离等特点,多用于制造加氢反应器。以往国内采用进口加钒钢板,随着国产钢板质量的提高,不少制造厂尝试使用国产板制造加氢反应器。通过国产加钒钢板板焊武加氢反应器的试制,介绍焊接和热处理的关键技术参数,为今后这类钢板的制造提供借鉴。 相似文献
19.
某航天装配车间生产管理仍是传统的生产管理方式,为了实现装配生产管理的信息化,研究了航天产品准时装配管理技术。引入丰田生产方式中“准时生产”技术,建立以一个流生产和看板管理为实施基础,以标准化作业、生产均衡化、设备合理布置、多技能作业员和全面质量管理为实施手段的航天产品准时装配体系。分析准时装配管理系统需求,并按照JavaEE标准设计包括装配派工执行、装配进度看板、物料配送看板和装配质量看板等功能模块,最后开发了航天产品准时装配管理系统原型。 相似文献
20.
油田水中F-,Cl-,Br-,NO-2,SO2-4的离子色谱分析 总被引:8,自引:0,他引:8
采用离子色谱法测定油田水中的氟、氯、溴、亚硝酸根和硫酸根的含量。以碳酸钠为流动相,用IonPac AS9-HC分析柱分离,分离效果理想,灵敏度较高。F^-,Cl^-,Br^-,NO2^-和SO4^2-的检测限分别为0.01mg/L,0.02mg/L,0.03mg/L,0.01mg/L,0.02mg/L,具有良好的线性和重现性。对油田水样品进行测定,其结果与化学分析结果对比,有较好的一致性。 相似文献