共查询到20条相似文献,搜索用时 93 毫秒
1.
宋卫东 《中国制造业信息化》2010,39(19)
为了提高模具加工的质量和效率,以电吹风外壳西模为例,介绍了用MasterCAM软件进行数控编程的基本方法,重点论述了电吹风外壳凸模加工工艺方案的合理性,并对电吹风外壳凸模进行了仿真模拟加工. 相似文献
2.
Pro/E在模具设计制造中的应用 总被引:3,自引:0,他引:3
介绍用Pro/E软件对电吹风外壳注塑模进行辅助设计与制造,及进行分模的流程,型腔数控加工的工艺编制方案;分析了模具CAD/CAM在现代模具设计与制造中的重要作用。 相似文献
3.
4.
虚拟物理数控加工仿真主要研究加工过程中切削力、切削热、机床运动误差、加工系统颤振以及负载变化引起加工结果变化的预测问题,目前已成为虚拟制造最具魅力的地方。通过在VERICUT下的电吹风外壳模盖的虚拟数控加工刀具轨迹优化研究,为复杂曲面零件的加工生产提供了有效参考。 相似文献
5.
鼠标外壳的注塑模设计及数控加工 总被引:3,自引:0,他引:3
本文主要使用了Pro/E软件的模具设计模块对鼠标外壳零件进行了模具设计,并在此基础上利用它的NC加工模块对凸模进行了数控编程。 相似文献
6.
以UG NX 9.0为软件平台,在分析零件特点的基础上研究了零件加工工艺。通过调整加工顺序和余量控制,对工艺过程进行优化;通过合理设置各项加工参数,生成了外壳凸模刀具路径,并利用仿真加工检验了刀轨的可靠性。试验结果表明,零件的表面质量和加工效率均得到提高。 相似文献
7.
8.
通过采用Cimatron E软件对电话外壳凸模进行数控加工程序编制,探讨了运用Cimatron E CAM系统对复杂零件进行程序编制的新思路,分析了凸模的加工工艺特点,实现了其刀路的编制,采用了体积铣、流线铣、精铣所有、精铣水平区域、型腔铣削—环切、平行切削、封闭式轮廓铣以及开放式轮廓铣等加工方法;采取了岛屿缺口的曲面补成完整曲面以及对于局部轴线与底面不平行的外形或孔槽建立新的坐标系再进行编程等方法。结果表明,采用Cimatron E软件CAM系统,提高了产品的质量,降低了生产成本。 相似文献
9.
10.
以曲面加工中非常典型的电吹风凹模零件加工为例,以MasterCAM系统为加工平台,对零件特点进行分析,对加工难点提出了策略,规划了加工工艺,解决了复杂曲面的加工,取得了良好的加工效果. 相似文献
11.
随着现代生活节奏的加快,人们对家用电器的要求越来越高.电吹风,作为现代家庭日常生活中常用的家用美发电器和现代人仪表装扮的必备品,也备受大家的关注和喜爱.本文主要对市面上现有电吹风产品的外观造型设计和在使用过程中所遇到的问题进行调研分析,以人性化设计和便利性设计为出发点,并根据市场调研、产品定位、外观造型设计、功能类型、... 相似文献
12.
13.
通过对某音响底壳零件的结构及工艺分析,阐述了该零件的冲压工艺和模具设计、加工的要点,设计了滑块式弯曲模具的装配图及主要零部件图。实践表明:该零件的冲压工艺方案合理,模具结构型式新颖、加工工艺合理可靠。 相似文献
14.
R. I. Nepershin 《Journal of Machinery Manufacture and Reliability》2014,43(1):60-68
A model of deep drawing of a thin-walled hemisphere with a flat bottom from a plane blank by a rigid punch, considering the work hardening and wall thickness variation is developed. Elastic bending and von Mises membrane rigid-plastic strain with different friction coefficients at the punch and die contact boundaries are considered. The computational model determines the distribution of the wall thickness and the material work hardening along the shell generatrix, the drawing force versus punch displacement relation, and the critical parameters of the process in which some defects are probable. 相似文献
15.
16.
17.
18.
双曲度扁壳拉深件面畸变的实验研究 总被引:3,自引:0,他引:3
以矩形双曲度扁壳为模型,研究了其拉深件面畸变分布、评价方法及形成机制,得到了压边力、型面曲率半径(凸模弦高)、板料厚度、材料性能、拉深筋对面畸变的影响规律,为面畸变的工程控制提供了基本依据。 相似文献
19.
An elasto-polycrystalline plastic finite element method is developed to simulate the deformation behavior and corresponding crystallographic texture evolution of sheet metals in stamping processes. A rate-independent crystal plasticity model and a degenerated shell element are introduced into the explicit finite element formulation. A successive integration method by which the shear rates on the slip systems can be calculated without prior determination of active/non-active state of the slip systems, as generally done in rate-dependent models, is employed to calculate the plastic strain rate of a crystal during the deformation. Representative crystal orientations are extracted from the orientation distribution function (ODF) data and assigned to the integration points of elements according to the distributional characteristic of crystal orientations. The macroscopic stress of a polycrystalline aggregate is evaluated by a volume-averaged response of the representative crystals. Two drawing processes are simulated, one with a cylindrical punch and the other with a square punch. Good agreements between the calculated results and experimental ones are obtained. 相似文献
20.
R. I. Nepershin 《Journal of Machinery Manufacture and Reliability》2009,38(3):263-269
A model of pressing a thin-wall tube by a curvilinear matrix taking into account the strengthening, normal anisotropy, change in the wall thickness, and contact friction according to the momentless theory of a rigid-plastic shell with a quadratic plasticity condition is elaborated. The calculation program of this model determines the distributions of the thickness, meridional stress, contact pressure, and fluidity stress of the strengthened material along the generatrix of the deformed tube and the plot of the change of the pressing force, depending on the displacement of the punch. 相似文献