Thiosemicarbazone Salicylaldiminato‐Palladium(II)‐Catalyzed Mizoroki–Heck Reactions

Four tridentate thiosemicarbazone salicylaldiminato‐palladium(II) complexes of the general formula [Pd(saltsc‐R)PPh₃] [saltsc=salicylaldehyde thiosemicarbazone; R=H ( 1 ), 3‐tert‐butyl ( 2 ), 3‐methoxy ( 3 ), 5‐chloro ( 4 )], have been evaluated as catalyst precursors for the Mizoroki–Heck coupling reaction between a variety of electron‐rich and electron‐poor aryl halides and olefins. The palladium complexes (0.1–1 mol% loading) were found to effectively catalyze these reactions with high yields being obtained when aryl iodides and aryl bromides were utilized. The effects of base, catalyst loading, reaction temperature and reaction time on the catalytic activity of the most active complex were also investigated.     

Regioselective Heck Reaction of N‐Vinylphthalimide: A General Strategy for the Synthesis of (E)‐N‐Styrylphthalimides and Phenethylamines

The arylation of N‐vinylphthalimide takes place at the β‐position with aryl iodides, bromides and chlorides using palladium acetate [Pd(OAc)₂] or phenone oxime‐derived palladacycles as catalysts under phosphine‐free conditions. The reaction is succesfully carried out in organic solvents, such as DMF, in the presence of an organic base, such as dicyclohexylmethylamine, and with TBAB as additive at 120 °C under conventional or microwave heating. (E)‐N‐Styrylphthalimides are mainly obtained using a rather low palladium loading (0.05–1 mol%). Similar catalytic efficiency is observed using a Kaiser oxime resin‐derived palladacycle, which allows reuse of the polymeric complex for three cycles. The high regioselectivity observed supports that these palladacycles work as a source of Pd(0) species operating mainly through a neutral mechanism. The syntheses of 2‐thienylphenethylamine and mescaline have been performed by subsequent hydrogenation with Wilkinson’s catalyst and hydrazinolysis.     

Recoverable Palladium Catalysts for Suzuki–Miyaura Cross‐ Coupling Reactions Based on Organic‐Inorganic Hybrid Silica Materials Containing Imidazolium and Dihydroimidazolium Salts

The systems formed by palladium acetate [Pd(OAc)₂] and hybrid silica materials prepared by sol‐gel from monosilylated imidazolium and disilylated dihydroimidazolium salts show catalytic activity in Suzuki–Miyaura cross‐couplings with challenging aryl bromides and chlorides. They are very efficient as recoverable catalysts with aryl bromides. Recycling is also possible with aryl chlorides, although with lower conversions. In situ formation of palladium nanoparticles has been observed in recycling experiments.     

Palladium‐Catalyzed Highly Regioselective Arylation of Allylamines with Thiophenes and Furans

A palladium‐catalyzed highly regioselective and stereoselective direct arylation of allylamine derivatives with a wide range of thiophenes and furans has been developed. In the presence of palladium(II) acetate [Pd(OAc)₂] catalyst and appropriate oxidants, the coupling reaction proceeded with excellent group compatibility and high efficiency, leading exclusively to γ‐arylated linear (E)‐allylamines. It was found that the choice of solvent, olefin substrate and oxidant had an important influence on reaction efficiency, and the use of sterically demanding N,N‐diprotected allylamines bearing a carbamate moiety is crucial for securing high regioselectivity and stereoslectivity. This method provides a straightforward approach for the efficient synthesis of various γ‐heteroarylated, linear (E)‐allylamines.     

Mizoroki–Heck Reactions Catalyzed by Dichloro{bis[1‐(dicyclohexylphosphanyl)piperidine]}palladium: Palladium Nanoparticle Formation Promoted by (Water‐Induced) Ligand Degradation

The palladium‐based dichlorobis[1‐(dicyclohexylphosphanyl)piperidine] complex – [(P{(NC₅H₁₀)(C₆H₁₁)₂})₂Pd(Cl)₂] is readily prepared in quantitative yield from the reaction of [Pd(cod)(Cl)₂] (cod=cycloocta‐1,5‐diene) with two equivalents of 1‐(dicyclohexylphosphanyl)piperidine in toluene under N₂ within only a few minutes at room temperature. This complex is a highly active Heck catalyst with excellent functional group tolerance, which reliably operates at low catalyst loadings. Various activated, non‐activated, deactivated, functionalized, sterically hindered, and heterocyclic aryl bromides, which may contain nitro, chloro or trifluoromethane groups, nitriles, acetales, ketones, aldehydes, ethers, esters, lactones, amides, anilines, phenols, alcohols, carboxylic acids, and heterocyclic aryl bromides, such as pyridines and derivatives, as well as thiophenes and aryl bromides containing methylsulfanyl groups have been successfully coupled with various (also functionalized) alkenes in excellent yields and selectivities (the E‐isomers are typically exclusively formed) at 140 °C in the presence of 0.05 mol % of the catalyst in DMF. Even though lower catalyst loadings could be used for many electronically activated, non‐activated and some electronically deactivated aryl bromides without noticeable loss of activity, the great advantage of the reaction protocol presented here lies in its reliability and general applicability, which allows its direct adoption to other aryl bromides without the neccessity of its modification. Experimental observations indicated that palladium nanoparticles are the catalytically active form. Consequently, whereas comparable levels of activity were observed for dichloro‐bis(aminophosphine) complexes of palladium, a dramatic drop in activity was found for their phosphine‐based analogue [(P(C₆H₁₁)₃)₂Pd(Cl)₂].     

Heterogeneous Palladium Catalysts Applied to the Synthesis of 2‐ and 2,3‐Functionalised Indoles

Heterogeneous palladium catalysts ([Pd(NH₃)₄]²⁺/NaY and [Pd]/SBA‐15) were applied to the synthesis of 2‐functionalised indoles, giving generally high conversions and selectivities (>89% yield) using only 1 mol % [Pd]‐catalyst under standard reaction conditions (polar solvent, 80 °C). For the synthesis of 2,3‐functionalised indoles by cross‐coupling arylation, the [Pd]/SBA‐15 catalyst was found to be particularly interesting, producing the expected compound with =35% yield after 12 days of reaction, which is comparable to the homogeneous catalyst, Pd(OAc)₂ (=48% yield). In the course of the study, the dual reactivity of the indole nucleus was demonstrated: aryl bromides gave clean C C coupling while aryl iodides led to a clean C N coupling.     

Simple Methodology for Heck Arylation at C‐8 of Adenine Nucleosides

A simple method for the arylation of 8‐vinyladenine nucleoside derivatives is reported. With a broad set of aryl iodides and bromides, the reaction is catalyzed by the simple combination palladium acetate/tris(o‐tolyl)phosphine/triethylamine [Pd(OAc)₂/(o‐tol)₃P/Et₃N]. As expected, aryl chlorides are more difficult coupling partners but some undergo reactions with more exotic catalysts. Although trans‐olefins are the major products, minor amounts of cis‐isomers are detected in some cases, and a post‐arylation mechanism for their formation is proposed. Finally, by subtle catalyst modulation chemoselective N‐arylation of the nucleoside can be achieved in the presence of the vinyl moiety.     

Direct Preparation of 7‐Allyl‐ and 7‐Arylindolines

Addition of allyl halides to the organolithium species derived from lithiation of N‐tert‐butoxycarbonylindoline with sec‐butyllithium (sec‐BuLi) and tetramethylethylenediamine (TMEDA) occurs regioselectively by S_N2 allylation. In contrast, the organolithium species can be transmetalated to the mixed zinc cuprate that undergoes regioselective S_N2′ allylations. Transmetalation to the organozinc chloride allows a Negishi‐type cross‐coupling reaction with aryl bromides using palladium catalysis with triphenylphosphine (PPh₃) as ligand. The chemistry was applied to a very short synthesis of 7‐prenylindole and of the alkaloid vasconine.     

Palladium nanoparticles as reusable catalyst for the synthesis of N-aryl sulfonamides under mild reaction conditions

An efficient palladium nanoparticles-catalyzed N-arylation of sulfonamides and sulfonyl azides is described. This procedure serves as an active protocol for intermolecular C–N bond formation using Pd(OAc)₂ in PEG-400 under air. Aryl bromides and triflates react at 35°C, while aryl chlorides require heating to 50°C and give the desired products only in low yields. This reaction proceeds smoothly in acceptable yields using low catalyst loading.     

Ligand‐Free Buchwald–Hartwig Aromatic Aminations of Aryl Halides Catalyzed by Low‐Leaching and Highly Recyclable Sulfur‐Modified Gold‐Supported Palladium Material

A stable heterogeneous catalyst precursor, sulfur‐modified gold‐supported palladium material (SAPd), has proved to be an excellent source of leached, ligand‐free, Pd for the amination of aryl bromides and chlorides. The reaction‐enabling catalyst is provided in situ as leached Pd in low catalyst loading (0.21±0.02 mol%). This allows the precatalyst (SAPd) to be filtered off and used for a minimum of ten reaction cycles without loss of catalytic activity. SAPd released only trace amounts, less than 0.6 ppm, of highly active Pd during the reaction without any aggregation.     

Palladium‐Catalyzed Aryl Amination Reactions of 6‐Bromo‐ and 6‐Chloropurine Nucleosides

Palladium‐catalyzed C N bond forming reactions of 6‐bromo‐ as well as 6‐chloropurine ribonucleosides and the 2′‐deoxy analogues with arylamines are described. Efficient conversions were observed with palladium(II) acetate/Xantphos/cesium carbonate, in toluene at 100 °C. Reactions of the bromonucleoside derivatives could be conducted at a lowered catalytic loading [5 mol% Pd(OAc)₂/7.5 mol% Xantphos], whereas good product yields were obtained with a higher catalyst load [10 mol% Pd(OAc)₂/15 mol% Xantphos] when the chloro analogue was employed. Among the examples evaluated, silyl protection for the hydroxy groups appears better as compared to acetyl. The methodology has been evaluated via reactions with a variety of arylamines and by synthesis of biologically relevant deoxyadenosine and adenosine dimers. This is the first detailed analysis of aryl amination reactions of 6‐chloropurine nucleosides, and comparison of the two halogenated nucleoside substrates.     

Functionalized cellulose‐supported triphenylphosphine and its application in Suzuki cross‐coupling reactions

A new heterogeneous cellulose tagged triphenylphosphine (Cell‐OPPh₃) was synthesized and subsequently coordinated with Pd(OAc)₂ to form a cellulose‐supported triphenylphosphine palladium complex (Cell‐OPPh₃‐Pd). Cell‐OPPh₃ and the corresponding palladium complex were fully characterized by TGA, SEM, TEM, and NMR analysis. Results of catalytic activity experiments indicate that the Cell‐OPPh₃‐Pd complex can efficiently catalyze Suzuki–Miyaura cross‐coupling reactions of aryl halides with arylboronic acids at mild reaction conditions. The coupling products can be obtained in good to excellent yields (up to 98%). The work‐up procedure is simple and the catalyst could be easily recovered by filtration, and then reused in next run. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41427.     

Sulfonated N‐Heterocyclic Carbenes for Pd‐Catalyzed Sonogashira and Suzuki–Miyaura Coupling in Aqueous Solvents

The reactions of the N,N′‐diarylimidazolium and N,N′‐diarylimidazolinium salts with chlorosulfonic acid result in the formation of the respective disulfonated N‐heterocyclic carbene (NHC) precursors in reasonable yields (46–77%). Water‐soluble palladium catalyst complexes, in situ obtained from the respective sulfonated imidazolinium salt, sodium tetrachloropalladate (Na₂PdCl₄) and potassium hydroxide (KOH) in water, were successfully applied in the copper‐free Sonogashira coupling reaction in isopropyl alcohol/water mixtures using 0.2 mol% catalyst loading. The preformed (disulfonatedNHC)PdCl(cinnamyl) complex was used in aqueous Suzuki–Miyaura reactions at 0.1 mol% catalyst loading. The coupling protocol reported here is very useful for Sonogashira reactions of N‐ and S‐heterocyclic aryl bromides and chlorides with aryl‐ and alkylacetylenes.     

Palladium‐Catalyzed Regioselective and Stereoselective Oxidative Heck Arylation of Allylamines with Arylboronic Acids

A general and convenient palladium‐catalyzed oxidative Heck arylation of both N‐protected and N,N‐diprotected allylic amines with arylboronic acids under mild conditions has been developed. The catalyst system, consisting of Pd(OAc)₂ (palladium acetate), AgOAc (silver acetate) and KHF₂ (potassium hydrogen fluoride), could efficiently catalyze the coupling reaction in acetone without the aid of any ligand, leading exclusively to the γ‐arylated allylic amine products in good to excellent yields. This method is highlighted with excellent regio‐ and stereocontrol and remarkable functional group tolerance. The carbamate moiety in allylic amine substrates is of crucial importance to the catalytic performance, and the chelation between the carbonyl O (oxygen) and Pd (palladium) atoms is believed to be responsible for the high regioselectivity and stereoselectivity observed.     

Palladium on Carbon‐Catalyzed Cross‐Coupling using Triarylbismuths

Simple and efficient protocols for the 10% palladium on carbon (Pd/C)‐catalyzed cross‐coupling reactions between triarylbismuths and aryl halides have been developed. A variety of iodo‐ and bromobenzenes possessing an electron‐withdrawing group on the aromatic nucleus were smoothly cross‐coupled in the presence of 10% Pd/C, sodium phosphate dodecahydrate (Na₃PO₄⋅12 H₂O) and 1,4‐diazabicyclo[2.2.2]octane (DABCO) in heated N‐methyl‐2‐pyrrolidone (NMP) as the solvent. For the arylations of iodobenzenes, the reactions effectively proceeded under the combined use of caesium fluoride (CsF) and 2,2′‐biquinoline. Furthermore, a ligand‐free 10% Pd/C‐catalyzed cross‐coupling reaction between the aryl iodides and triarylbismuths was also established by the addition of tetra‐n‐buthylammonium fluoride trihydrate (TBAF⋅3 H₂O) in which the palladium metals were hardly leached from the catalyst into the reaction media.     

tert‐Butyl Sulfoxides: Key Precursors for Palladium‐Catalyzed Arylation of Sulfenate Salts

The present report describes an efficient and clean generation of sulfenate salts (R¹SO⁻) by pyrolysis of readily available tert‐butyl sulfoxides to give sulfenic acids (R¹SOH) and traceless isobutene, followed by hydrogen abstraction with a weak inorganic base (K₃PO₄). The relevance of this process was exemplified through an in situ palladium‐catalyzed cross‐coupling reaction with aryl halides/triflates leading to aryl sulfoxides. The operationally simple C S bond‐forming protocol developed uses Pd(dba)₂ as catalyst and Xantphos as ligand in toluene or a toluene/H₂O mixture. Further extensions include the use of di‐tert‐butyl sulfoxide as an equivalent for sulfur monoxide dianion (SO²⁻) and the development of diastereoselective versions in the [2.2]paracyclophane and biaryl series.

     

Extremely Efficient Cross‐Coupling of Benzylic Halides with Aryltitanium Tris(isopropoxide) Catalyzed by Low Loadings of a Simple Palladium(II) Acetate/Tris(p‐tolyl)phosphine System

Highly efficient coupling reactions of benzylic bromides or chlorides with aryltitanium tris(isopropoxide) [ArTi(O‐i‐Pr)₃] catalyzed by a simple palladium(II) acetate/tris(p‐tolyl)phosphine [Pd(OAc)₂/ P(p‐tolyl)₃] system are reported. The coupling reactions proceed in general at room temperature employing low catalyst loadings of 0.02 to 0.2 mol%, affording coupling products in excellent yields of up to 99%. For benzylic bromides bearing strong electron‐withdrawing cyano (CN) or trifluoromethyl (CF₃) substituents, the reactions require a higher catalyst loading of 1 mol%, or the reactions are carried out at 60 °C. The catalytic system also tolerates (1‐bromoethyl)benzene bearing β‐hydrogen atoms while using a catalyst loading of 1 mol% to afford the coupling product in a 70% yield.     

Suzuki–Miyaura Reactions of Aryl Chloride Derivatives with Arylboronic Acids using Mesoporous Silica‐Supported Aryldicyclohexylphosphine

The Suzuki–Miyaura reactions using mesoporous‐supported aryldicyclohexylphosphine as ligand have been investigated. The catalysts were based on SBA‐15 type mesoporous silica which was transformed in a four‐step synthesis leading to a phosphine‐containing hybrid material The most productive catalytic system studied was generated in situ from this material and the homogeneous palladium complex, Pd(OAc)₂. Other catalytic systems were studied for comparison [homogeneous cataysts, a “preformed” catalyst obtained by reaction of PdCl₂(PhCN)₂ and the phosphine‐containing material]. Variations involving the solvent system, the substrate aryl chloride and the arylboronic acid reactant were also studied. For both in situ and preformed catalyst systems, high conversions and yields are obtained for activated aryl chlorides. Success of the reaction for unactivated aryl chlorides was limited to the catalyst formed in situ. The catalyst formed in situ was also shown to be reactive under aqueous reaction conditions in the cross‐coupling of 1‐(4‐chlorophenyl)ethanone with phenylboronic acid.     

Calixarene‐Derived Mono‐Iminophosphoranes: Highly Efficient Ligands for Palladium‐ and Nickel‐Catalysed Cross‐Coupling

The first mono‐iminophosphoranes based on a calix[4]arene skeleton have been synthesised and tested in the arylation of aryl bromides and aryl chlorides. Combining these ligands with [Pd(OAc)₂] or [Ni(cod)₂] resulted in highly active Suzuki–Miyaura and Kumada–Tamao–Corriu cross‐coupling catalysts, respectively. TOFs up to ca. 4×10⁵ mol(ArBr)⋅mol(M)⁻¹⋅h⁻¹ were obtained in each case. The remarkable activities observed probably arise from the ligands’ ability to form complexes with cavity‐entrapped “MArX” moieties (endo‐complexes), their highly crowded metal environment favouring formation of mono‐ligated intermediates over that of less reactive bis‐ligated ones. Possible supramolecular interactions within the cavity involving the receptor wall and the aromatic substrate may also significantly influence the reaction rates, notably by increasing the proportion of endo‐complexes.     

A General and Practical Palladium‐Catalyzed Direct α‐Arylation of Amides with Aryl Halides

An efficient system for the direct catalytic intermolecular α‐arylation of acetamide derivatives with aryl bromides and chlorides is presented. The palladium catalyst is supported by Kwong’s indole‐based phosphine ligand and provides monoarylated amides in up to 95% yield. Excellent chemoselectivities (>10:1) in the mono‐ and diarylation with aryl bromides were achieved by careful selection of bases, solvents, and stoichiometry. Under the coupling conditions, the weakly acidic α‐protons of amides (pK_a up to 35) were reversibly depotonated by lithium tert‐butoxide (LiO‐t‐Bu), sodium tert‐butoxide (NaO‐t‐Bu) or sodium bis(trimethylsilyl)amide [NaN(SiMe₃)₂].